IOP Conference Series: Materials Science and Engineering, ‎1757-8981

Journal

ISSNs1757-8981, 1757-899X
Additional searchable ISSN (electronic)1757-899X
1 - 58 out of 58Page size: 100

Research output

  1. 2024
  2. Published

    Overview on aluminium alloys as sinks for end-of-life vehicle scrap

    Pogatscher, S. & Samberger, S., 1 Oct 2024, In: IOP Conference Series: Materials Science and Engineering. 2024, 1315, 15 p., 012008.

    Research output: Contribution to journal › Article › Research › peer-review

  3. 2023
  4. Published

    Annealing effects on Al/polyimide adhesion in flexible optical solar reflectors

    Cordill, M. J., Kreiml, P., Lassnig, A., Gebhart, D., Žák, S., Mitterer, C., Grießer, T. & Milassin, G., 2023, In: IOP Conference Series: Materials Science and Engineering. 2023, 1287, 9 p., 012006.

    Research output: Contribution to journal › Article › Research › peer-review

  5. Published

    Effect of Eu and P additions with Ta grain refiner on the solidification microstructure of Al-7Si-0.3Mg alloys

    Spacil, I., Schumacher, P. & LI, J., 2023, In: IOP Conference Series: Materials Science and Engineering. 2023, 1274, 6 p., 012006.

    Research output: Contribution to journal › Article › Research › peer-review

  6. Published

    Observation of pertitectic couple growth for a hyper-peritectic alloy under microgravity conditions

    Ludwig, A. & Mogeritsch, J. P., 2023, In: IOP Conference Series: Materials Science and Engineering.

    Research output: Contribution to journal › Conference article › peer-review

  7. Published

    On modelling conjugated heat transfer in the thin slab CC mold and solid shell formation under the applied EMBr

    Vakhrushev, A., Karimi Sibaki, E., Wu, M., Ludwig, A., Nitzl, G., Tang, Y., Hackl, G., Watzinger, J., Bohacek, J. & Kharicha, A., 2023, In: IOP Conference Series: Materials Science and Engineering. 2023, 1274, 7 p., 012023.

    Research output: Contribution to journal › Conference article › peer-review

  8. Published

    Potential etutectic accumulation in single crytal turbine blade due to geometry effect: a numerical study

    Zhang, H., Ma, D., Ludwig, A., Kharicha, A. & Wu, M., 2023, In: IOP Conference Series: Materials Science and Engineering.

    Research output: Contribution to journal › Conference article › peer-review

  9. 2020
  10. Published

    FEM Simulation Procedure for Distortion and Residual Stress Analysis of Wire Arc Additive Manufacturing

    Nursyahirah Binti Ahmad , S., Manurung, Y., Mat, M. F., Minggu, Z., Jaffar, A., Prüller, S. & Leitner, M., 22 Jun 2020, In: IOP Conference Series: Materials Science and Engineering. 2020, 834, 11 p., 012083.

    Research output: Contribution to journal › Conference article › peer-review

  11. Published

    Grain Growth Prediction of Bead-on-Plate with Filler Wire SS316L using FEM

    Faiz Mat, M., Manurung, Y. H. P., Muhammad, N., Ditler, A., Syakir Abd Ghani, M. & Leitner, M., 22 Jun 2020, In: IOP Conference Series: Materials Science and Engineering. 2020, 834, 012009.

    Research output: Contribution to journal › Conference article › peer-review

  12. Published

    Prediction of Crack Propagation Rate and Stress Intensity Factor of Fatigue and Welded Specimen with a Two-Dimensional Finite Element Method

    Olanrewaju Busari, Y., Ariri , A., Manurung, Y., Sebayang, D., Leitner, M., Zaini, W. S. B. W., Kamilzukairi, M. A. B. M. & E. Celik, E., 22 Jun 2020, In: IOP Conference Series: Materials Science and Engineering. 2020, 834, 14 p., 012008.

    Research output: Contribution to journal › Article › Research › peer-review

  13. Published

    Modeling mixed columnar-equiaxed solidification of Sn-10wt%Pb alloy under forced convection driven by travelling magnetic stirring

    Zhang, Z., Wu, M., Zhang, H., Karimi-Sibaki, E., Ludwig, A. & Kharicha, A., 12 Jun 2020, In: IOP Conference Series: Materials Science and Engineering. 861, 1, 012024.

    Research output: Contribution to journal › Conference article › peer-review

  14. 2019
  15. Published

    Efficient model for the prediction of dendritic grain growth using the lattice Boltzmann method coupled with a cellular automaton algorithm

    Jäger, S. & Ludwig, A., 17 Jun 2019, In: IOP Conference Series: Materials Science and Engineering. 529, 1, 012028.

    Research output: Contribution to journal › Conference article › peer-review

  16. Published

    On modelling viscoplastic behavior of the solidifying shell in the funnel-type continuous casting mold

    Vakhrushev, A., Kharicha, A., Wu, M., Ludwig, A., Nitzl, G., Tang, Y., Hackl, G., Watziger, J. & Rodrigues, C. M. G., 17 Jun 2019, In: IOP Conference Series: Materials Science and Engineering. 529, 1, 012081.

    Research output: Contribution to journal › Conference article › peer-review

  17. Published

    On the Modelling of Macrosegregation during Twin-Roll Casting

    Rodrigues, C. G., Ludwig, A., Kharicha, A., Wu, M. & Vakhrushev, A., 17 Jun 2019, In: IOP Conference Series: Materials Science and Engineering. 2019, 529, 8 p., 012041.

    Research output: Contribution to journal › Conference article › peer-review

  18. Published

    Preface : 5th International Conference on Advances in Solidification Processes (ICASP5) 5th International Symposium on Cutting Edge of Computer Simulation of Solidification, Casting and Refining (CSSCR5) June 17-21, 2019 The Pitter Event Center, Salzburg, Austria

    Gandin, C. A. & Wu, M., 17 Jun 2019, In: IOP Conference Series: Materials Science and Engineering. 529.2019, 1, 1 p., 011001.

    Research output: Contribution to journal › Editorial › peer-review

  19. Published

    Evaluation of AHSS concepts with a focus on the product properties and appropriate casting characteristics of Arvedi ESP thin slab casters

    Bernhard, C., Linzer, B., Presoly, P., Watzinger, I. & Watzinger, J., 2019, In: IOP Conference Series: Materials Science and Engineering. 529.2019, 012071, p. 1-10 10 p., 012071.

    Research output: Contribution to journal › Article › Research › peer-review

  20. Published

    Fracture toughness of Silicon Nitride Measured by the Surface Crack in Flexure (SCF) Test Method

    Nindhia, T. G. T. & Lube, T., 2019, In: IOP Conference Series: Materials Science and Engineering. 622, 012001.

    Research output: Contribution to journal › Article › Transfer › peer-review

  21. 2018
  22. Published

    Fracture Toughness (KIC) of Lithography Based Manufactured Alumina Ceramic

    Nindhia, T. G. T., Schlacher, J. C. & Lube, T., 2018, In: IOP Conference Series: Materials Science and Engineering. 012022.

    Research output: Contribution to journal › Article › Research › peer-review

  23. 2017
  24. Published

    Strength and ductility of heavily deformed pearlitic microstructures

    Hohenwarter, A., Kapp, M., Völker, B., Renk, O. & Pippan, R., 1 Aug 2017, In: IOP Conference Series: Materials Science and Engineering. 219.2017, 1, 10 p., 012003.

    Research output: Contribution to journal › Article › Research › peer-review

  25. Published

    Microstructure and texture evolution during severe plastic deformation of CrMnFeCoNi high-entropy alloy

    Skrotzki, W., Pukenas, A., Joni, B., Odor, E., Ungar, T., Hohenwarter, A., Pippan, R. & George, E. P., 8 May 2017, In: IOP Conference Series: Materials Science and Engineering. 2017, 194, 012028.

    Research output: Contribution to journal › Article › Research › peer-review

  26. Published

    Quantum-mechanical study of tensorial elastic and high-temperature thermodynamic properties of grain boundary states in superalloy-phase Ni3Al

    Friák, M., Vsianska, M., Holec, D. & Šob, M., 2017, In: IOP Conference Series: Materials Science and Engineering. 219.2017, 11 p., 012019.

    Research output: Contribution to journal › Article › Research › peer-review

  27. 2016
  28. Published

    An attempt to model electrode change during the ESR process

    Karimi-Sibaki, E., Kharicha, A., Wu, M., Ludwig, A., Holzgruber, H., Ofner, B., Scheriau, A., Kubin, M. & Ramprecht, M., 10 Aug 2016, In: IOP Conference Series: Materials Science and Engineering. 143, 1, 012006.

    Research output: Contribution to journal › Conference article › peer-review

  29. Published

    A numerical study on electrochemical transport of ions in calcium fluoride slag

    Karimi-Sibaki, E., Kharicha, A., Wu, M. & Ludwig, A., 10 Aug 2016, In: IOP Conference Series: Materials Science and Engineering. 143, 1, 012008.

    Research output: Contribution to journal › Conference article › peer-review

  30. Published

    Assessment of different turbulence models for the motion of non-metallic inclusion in induction crucible furnace

    Barati, H., Wu, M., Kharicha, A. & Ludwig, A., 10 Aug 2016, In: IOP Conference Series: Materials Science and Engineering. 143, 1, 012026.

    Research output: Contribution to journal › Conference article › peer-review

  31. Published

    Experimental und numerical investigations on cooling efficiency of Air-Mist nozzles on steel during continuous casting

    Arth, G., Taferner, M., Bernhard, C. & Michelic, S. C., 10 Aug 2016, In: IOP Conference Series: Materials Science and Engineering. 143.2016, 1, 9 p., 012033.

    Research output: Contribution to journal › Article › Research › peer-review

  32. Published

    Formation of shrinkage porosity during solidification of steel: Numerical simulation and experimental validation

    Riedler, M., Michelic, S. K. & Bernhard, C., 10 Aug 2016, In: IOP Conference Series: Materials Science and Engineering. 143.2016, 1, 9 p., 012035.

    Research output: Contribution to journal › Article › Research › peer-review

  33. Published

    New developments on optimizing properties of high-Zn aluminium cast alloys

    Krajewski, W. K., Buras, J., Krajewski, P. K., Greer, A. L., Schumacher, P. & Haberl, K., 10 Aug 2016, In: IOP Conference Series: Materials Science and Engineering. 143, 1, 012029.

    Research output: Contribution to journal › Conference article › peer-review

  34. Published

    On the importance of thermodynamic investigations for the re-assessment of selected ternary Fe-base systems

    Presoly, P. & Bernhard, C., 10 Aug 2016, In: IOP Conference Series: Materials Science and Engineering. 143, 1, 012034.

    Research output: Contribution to journal › Conference article › peer-review

  35. Published

    Simulation of macrosegregation in a large vertical continuous casting of steel

    Zheng, Y., Wu, M., Kharicha, A. & Ludwig, A., 10 Aug 2016, In: IOP Conference Series: Materials Science and Engineering. 143, 1, 012032.

    Research output: Contribution to journal › Conference article › peer-review

  36. Published

    Transient melting of an ESR electrode

    Kharicha, A., Karimi-Sibaki, E., Bohacek, J., Wu, M. & Ludwig, A., 10 Aug 2016, In: IOP Conference Series: Materials Science and Engineering. 143, 1, 012003.

    Research output: Contribution to journal › Conference article › peer-review

  37. Published

    Estimation of material parameters in nonlinear hardening plasticity models and strain life curves for CuAg alloy

    Novak, J. S., Benasciutti, D., De Bona, F., Stanojević, A., De Luca, A. & Raffaglio, Y., 14 Apr 2016, In: IOP Conference Series: Materials Science and Engineering. 119, 1, 012020.

    Research output: Contribution to journal › Conference article › peer-review

  38. Published

    International Conference on Materials, Processing and Product Engineering 2015 (MPPE2015)

    Eck, S., Ludwig, A. & Ebner, R., 14 Apr 2016, In: IOP Conference Series: Materials Science and Engineering. 119.2016, 1, 2 p., 011001.

    Research output: Contribution to journal › Editorial › peer-review

  39. Published

    Mechanical properties of low-alloy-steels with bainitic microstructures and varying carbon content

    Weber, A., Klarner, J., Vogl, T., Schöngrundner, R., Sam, G. & Buchmayr, B., 14 Apr 2016, In: IOP Conference Series: Materials Science and Engineering. 2016, 119/1, 012005.

    Research output: Contribution to journal › Conference article › peer-review

  40. Published

    Thermal stability of residual stresses in Ti-6Al-4V components

    Stanojevic, A., Angerer, P. & Oberwinkler, B., 14 Apr 2016, In: IOP Conference Series: Materials Science and Engineering. 119, 1, 012007.

    Research output: Contribution to journal › Conference article › peer-review

  41. Published

    Thermodynamic optimization of individual steel database by means of systematic DSC measurements according the CALPHAD approach

    Presoly, P., Six, J. & Bernhard, C., 14 Apr 2016, In: IOP Conference Series: Materials Science and Engineering. 119, 1, 012013.

    Research output: Contribution to journal › Conference article › peer-review

  42. Published

    Heterogeneous nucleation of entrained eutectic Si in high purity melt spun Al-Si alloys investigated by entrained droplet technique and DSC

    Li, J. H., Albu, M., Ludwig, T. H., Hofer, F., Arnberg, L. & Schumacher, P., 31 Mar 2016, In: IOP Conference Series: Materials Science and Engineering. 117, 1, 012006.

    Research output: Contribution to journal › Conference article › peer-review

  43. Published

    Impurity effects on the solidification of primary Al3(Sc,Zr) phase in Al alloys

    Li, J. H. & Schumacher, P., 31 Mar 2016, In: IOP Conference Series: Materials Science and Engineering. 117, 1, 012020.

    Research output: Contribution to journal › Conference article › peer-review

  44. Published

    Automatic optimization of localized heat treatment for Al-Si-Mg alloys

    Ludwig, A. & Holzmann, T., 2016, In: IOP Conference Series: Materials Science and Engineering.

    Research output: Contribution to journal › Article › Research › peer-review

  45. Published

    Formation of shrinkage porosity during solidification of steel: Numerical simulation and experimental validation

    Riedler, M., Michelic, S. & Bernhard, C., 2016, In: IOP Conference Series: Materials Science and Engineering. 143.2016, 1, 8 p., 012035.

    Research output: Contribution to journal › Article › Research › peer-review

  46. Published

    Free-surface flow in horizontally rotating cylinder: experiment and simulation

    Bohacek, J., Kharicha, A., Ludwig, A., Wu, M., Paar, A., Brandner, M., Elizondo, L. & Trickl, T., 2016, In: IOP Conference Series: Materials Science and Engineering. p. 1-7

    Research output: Contribution to journal › Article › Research › peer-review

  47. Published

    Influence of forced convection on solidification and remelting in the developing mushy zone

    Wu, M., Vakhrushev, A., Ludwig, A. & Kharicha, A., 2016, In: IOP Conference Series: Materials Science and Engineering.

    Research output: Contribution to journal › Article › Research › peer-review

  48. Published

    In-situ observation of the behaviour of non-metallic inclusions at different interfaces in the system steel-slag-refractory

    Michelic, S., Salgado, U. D. & Bernhard, C., 2016, In: IOP Conference Series: Materials Science and Engineering. 143, 1, p. 012010 1 p.

    Research output: Contribution to journal › Article › Research › peer-review

  49. Published

    Investigation of metallurgical phenomena related to process and product development by means of High Temperature Confocal Scanning Laser Microscopy

    Diéguez-Salgado, U., Michelic, S. & Bernhard, C., 2016, In: IOP Conference Series: Materials Science and Engineering. 119, 1, 1 p.

    Research output: Contribution to journal › Article › Research › peer-review

  50. Published

    Investigation of the influence of the chemical composition of HSLA steel grades on the microstructure homogeneity during hot rolling in continuous rolling mills using a fast layer model

    Schmidtchen, M., Rimnac, A., Warczok, P., Kozeschnnik, E., Bernhard, C., Bragin, S., Kawalla, R. & Linzer, B., 2016, In: IOP Conference Series: Materials Science and Engineering. 119, 1, p. 12001 1 p.

    Research output: Contribution to journal › Article › Research › peer-review

  51. Published

    Modelling Al-4wt.%Cu as-cast structure using equiaxed morphological parameters deduced from in-situ synchrotron X-ray radiography

    Ahmadein, M., Wu, M., Reinhart, G. & Nguyen-Thi, H., 2016, In: IOP Conference Series: Materials Science and Engineering.

    Research output: Contribution to journal › Article › Research › peer-review

  52. Published

    Numerical investigation of solidification and CET of the transparent alloy NPG-37.5 wt.% DC in microgravity “TRACE” experiment

    Ahmadein, M., Wu, M., Sturz, L., Zimmermann, G. & Ludwig, A., 2016, In: IOP Conference Series: Materials Science and Engineering.

    Research output: Contribution to journal › Article › Research › peer-review

  53. Published

    SEM and FIB-SEM investigations on potential gas shales in the Dniepr-Donets Basin (Ukraine): Pore space evolution in organic matter during thermal maturation

    Misch, D., Mendez Martin, F., Hawranek, G., Onuk, P., Groß, D. & Sachsenhofer, R., 2016, In: IOP Conference Series: Materials Science and Engineering. 109, doi:10.1088/1757-899X/109/1/012010

    Research output: Contribution to journal › Article › Research › peer-review

  54. Published

    Simulation of thermos-solutal convection induced macrosegregation in a Sn-10% Pb alloy benchmark during columnar solidification

    Zheng, Y., Wu, M., Kharicha, A. & Ludwig, A., 2016, In: IOP Conference Series: Materials Science and Engineering.

    Research output: Contribution to journal › Article › Research › peer-review

  55. 2015
  56. Published

    A benchmark for the validation of solidification modelling algorithms

    Kaschnitz, E., Heugenhauser, S. & Schumacher, P., 8 Jul 2015, In: IOP Conference Series: Materials Science and Engineering.

    Research output: Contribution to journal › Article › Research › peer-review

  57. Published

    A scale adaptive dendritic envelope model of solidification at mesoscopic scales

    Kharicha, A., Stefan-Kharicha, M., Ludwig, A. & Wu, M., 2015, In: IOP Conference Series: Materials Science and Engineering. 84.2015, 9 p., 012032.

    Research output: Contribution to journal › Article › Research › peer-review

  58. Published

    Benchmark experiments and numerical modelling of the columnar-equiaxed dendritic growth in the transparent alloy Neopentylglycol-(d)Camphor

    Sturz, L., Wu, M., Zimmermann, G., Ludwig, A. & Ahmadein, M., 2015, In: IOP Conference Series: Materials Science and Engineering. 2015, 84, 8 p., 012086.

    Research output: Contribution to journal › Article › Research › peer-review

  59. Published

    Modelling of macrosegregation in direct chill casting considering columnar-to-equiaxed transition using 3-phase Eulerian approach

    Hao, J., Lin, Y. J., Nie, Y., Wu, M. & Ludwig, A., 2015, In: IOP Conference Series: Materials Science and Engineering.

    Research output: Contribution to journal › Article › Research › peer-review

  60. Published

    Two-phase modelling of equiaxed crystal sedimentation and thermomechanic stress development in the sedimented packed bed

    Ludwig, A., Vakhrushev, A., Holzmann, T., Wu, M. & Kharicha, A., 2015, In: IOP Conference Series: Materials Science and Engineering.

    Research output: Contribution to journal › Article › Research › peer-review

  61. Published

    Using four-phase Eulerian volume averaging approach to model macrosegregation and shrinkage cavity

    Wu, M., Kharicha, A. & Ludwig, A., 2015, In: IOP Conference Series: Materials Science and Engineering.

    Research output: Contribution to journal › Article › Research › peer-review

  62. 2014

  63. Characterization of residual stresses by WEDM-assisted dissectioning

    Regener, B., Krempaszky, C., Werner, E., Berhuber, E. & Stockinger, M., 1 Jan 2014, In: IOP Conference Series: Materials Science and Engineering. 10, 1, 012078.

    Research output: Contribution to journal › Conference article › peer-review

  64. Published

    Deformation behavior of Cu-composites processed by HPT

    Krämer, L., Wurster, S. & Pippan, R., 1 Jan 2014, In: IOP Conference Series: Materials Science and Engineering. 63, 1, 012026.

    Research output: Contribution to journal › Article › Research › peer-review

  65. 2012
  66. Published

    Preface - 13th International Conference on Modeling of Casting, Welding and Advanced Solidification Processes, MCWASP 2012; Schladming; Austria; 17 June 2012 through 22 June 2012

    Ludwig, A., 1 Dec 2012, In: IOP Conference Series: Materials Science and Engineering. 33, 1, 011002.

    Research output: Contribution to journal › Editorial › peer-review

  67. Published

    Simulation of distortion and residual stress in high pressure die casting - modelling and experiments

    Hofer, P., Kaschnitz, E. & Schumacher, P., 2012, In: IOP Conference Series: Materials Science and Engineering. 33.2012, p. 1-8 8 p., 012055.

    Research output: Contribution to journal › Article › Research › peer-review

  68. 2011
  69. Published

    In-situ observation of coupled growth morphologies in organic peritectics

    Mogeritsch, J. P. & Ludwig, A., 2011, In: IOP Conference Series: Materials Science and Engineering. 27, 1, 012028.

    Research output: Contribution to journal › Conference article › peer-review

View graph of relations