International journal of refractory metals & hard materials, ‎0263-4368

Journal

ISSNs0263-4368
1 - 41 out of 41Page size: 100

Research output

  1. 2024
  2. Published

    Exploring the fracture toughness and fatigue crack growth behavior of MoRe alloys

    Pillmeier, S., Žák, S., Pippan, R., Eckert, J. & Hohenwarter, A., 19 Nov 2024, In: International Journal of Refractory Metals and Hard Materials. 127.2025, February, 10 p., 106969.

    Research output: Contribution to journal › Article › Research › peer-review

  3. Published

    Chemical vapor deposited TiCN/TiC multilayer coatings: On the interplay between coating architecture and mechanical properties

    Kainz, C., Tkadletz, M., Maier-Kiener, V., Völker, B., Burtscher, M., Waldl, H., Schiester, M., Thurner, J., Czettl, C. & Schalk, N., 14 Sept 2024, In: International journal of refractory metals & hard materials. 125.2024, December, 6 p., 106890.

    Research output: Contribution to journal › Article › Research › peer-review

  4. 2023
  5. Published

    Strength determination for rough substrate-coating interfaces with three-dimensional defect structure

    Klünsner, T., Krobath, M., Konetschnik, R., Tritremmel, C., Maier-Kiener, V., Samardzic, D., Ecker, W., Czettl, C., Mitterer, C. & Kiener, D., Apr 2023, In: International journal of refractory metals & hard materials. 112.2023, April, 10 p., 106149.

    Research output: Contribution to journal › Article › Research › peer-review

  6. Published

    Effect of boron doping on grain boundary cohesion in technically pure molybdenum investigated via meso-scale three-point-bending tests

    Jakob, S., Hohenwarter, A., Lorich, A., Knabl, W., Pippan, R., Clemens, H. & Maier-Kiener, V., 2 Mar 2023, In: International journal of refractory metals & hard materials. 113.2023, June, 4 p., 106173.

    Research output: Contribution to journal › Article › Research › peer-review

  7. Published

    Enhancing mechanical properties of ultrafine-grained tungsten for fusion applications

    Wurmshuber, M., Doppermann, S., Wurster, S., Jakob, S., Balooch, M., Alfreider, M., Schmuck, K. S., Bodlos, R., Romaner, L., Hosemann, P., Clemens, H., Maier-Kiener, V. & Kiener, D., Feb 2023, In: International journal of refractory metals & hard materials. 111.2023, February, 7 p., 106125.

    Research output: Contribution to journal › Article › Research › peer-review

  8. Published

    Evolution of nano-pores during annealing of technically pure molybdenum sheet produced from different sintered formats

    Jakob, S., Lorich, A., Knabl, W., Stark, A., Staron, P., Clemens, H. & Spörk-Erdely, P., Jan 2023, In: International journal of refractory metals & hard materials. 110.2023, January, 7 p., 106032.

    Research output: Contribution to journal › Article › Research › peer-review

  9. Published

    Influence of Co-enriched surface zones in cemented carbides on the microstructure and mechanical properties of TiN/TiC0.6N0.4/ α-Al2O3 coatings

    Konstantiniuk, F., Krobath, M., Ecker, W., Tkadletz, M., Czettl, C. & Schalk, N., Jan 2023, In: International journal of refractory metals & hard materials. 110.2023, January, 8 p., 106025.

    Research output: Contribution to journal › Article › Research › peer-review

  10. 2022
  11. E-pub ahead of print

    Studies on the phase formation of cobalt contacted with zinc vapour

    Leitner, M., Winter, F., Gerold, E., Luidold, S., Storf, C., Czettl, C., Janka, L., Karhumaa, T. & Antrekowitsch, H., 22 Apr 2022, (E-pub ahead of print) In: International Journal of Refractory Metals and Hard Materials. 107.2022, September, 8 p., 105877.

    Research output: Contribution to journal › Article › Research › peer-review

  12. 2020
  13. Published

    Microstructural evolution of W-10Re alloys due to thermal cycling at high temperatures and its impact on surface degradation

    Siller, M., Schatte, J., Gerzoskovitz, S., Knabl, W., Pippan, R., Clemens, H. & Maier-Kiener, V., Nov 2020, In: International journal of refractory metals & hard materials. 92.2020, November, 11 p., 105285.

    Research output: Contribution to journal › Article › Research › peer-review

  14. Published

    Successful control of the reaction mechanism for semi-direct recycling of hard metals

    Kücher, G., Luidold, S., Czettl, C. & Storf, C., 1 Jan 2020, In: International Journal of Refractory Metals and Hard Materials. 86, 105131.

    Research output: Contribution to journal › Article › Research › peer-review

  15. Published

    Stress relaxation through thermal crack formation in CVD TiCN coatings grown on WC-Co with different Co contents

    Stylianou, R. P., Velic, D., Daves, W., Ecker, W., Stark, A., Schell, N., Tkadletz, M., Schalk, N., Czettl, C. & Mitterer, C., Jan 2020, In: International journal of refractory metals & hard materials. 86.2020, January, 9 p., 105102.

    Research output: Contribution to journal › Article › Research › peer-review

  16. 2019
  17. Published

    Fabrication and properties of extrusion-based 3D-printed hardmetal and cermet components

    Lengauer, W., Duretek, I., Fürst, M., Schwarz, V., Gonzalez-Gutierrez, J., Schuschnigg, S., Kukla, C., Kitzmantel, M., Neubauer, E., Lieberwirth, C. & Morrison, V., 1 Aug 2019, In: International Journal of Refractory Metals and Hard Materials. 82.2019, August, p. 141-149 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  18. Published

    Thermal crack network on CVD TiCN/α-Al2O3 coated cemented carbide cutting tools

    Gassner, M., Schalk, N., Tkadletz, M., Czettl, C. & Mitterer, C., 5 Feb 2019, In: International journal of refractory metals & hard materials. 81.2019, June, p. 1-6 6 p.

    Research output: Contribution to journal › Article › Research › peer-review

  19. Published

    Fatigue behaviour of WC-Co hard metal under stress ratio and effectively loaded volume relevant to metalworking tool failure

    Klünsner, T., Jonke, M., Supancic, P., Gettinger, C., Krobath, M., Lube, T., Marsoner, S. & Glätzle, J., 4 Jan 2019, In: International Journal of Refractory Metals and Hard Materials. 80, p. 97-103 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  20. 2018
  21. Published

    Arc evaporated Ti-Al-N/Cr-Al-N multilayer coating systems for cutting applications

    Teppernegg, T., Czettl, C., Michotte, C. & Mitterer, C., 2018, In: International journal of refractory metals & hard materials. 72, p. 83-88

    Research output: Contribution to journal › Article › Research › peer-review

  22. Published

    Cross-sectional characterization techniques as the basis for knowledge-based design of graded CVD TiN-TiB2 coatings

    Tkadletz, M., Schalk, N., Mitterer, C., Keckes, J., Pohler, M. & Czettl, C., 2018, In: International journal of refractory metals & hard materials. 71, p. 280-284

    Research output: Contribution to journal › Article › Research › peer-review

  23. Published

    Influence of temperature on the biaxial strength of cemented carbides with different microstructures

    Chicardi, E., Bermejo, R., Gotor, F. J., Llanes, L. & Torres, Y., 2018, In: International journal of refractory metals & hard materials. 71, p. 82-91 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  24. Published

    Interaction of precipitation, recovery and recrystallization in the Mo-Hf-C alloy MHC studied by multipass compression tests

    Siller, M., Lang, D., Schatte, J., Knabl, W., Clemens, H. & Maier-Kiener, V., 2018, In: International journal of refractory metals & hard materials. 73.2018, June, p. 199-203 5 p.

    Research output: Contribution to journal › Article › Research › peer-review

  25. Published

    Lixiviation kinetics of cobalt from cemented carbides

    Kücher, G., Luidold, S., Czettl, C. & Storf, C., 2018, In: International journal of refractory metals & hard materials. 70.2018, Supplement C, p. 239-245 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  26. Published

    Microstructure, mechanical properties and cutting performance of Cr1-yTayN single layer and Ti1-xAlxN/Cr1-yTayN multilayer coatings

    Schalk, N., Pohler, M., Hirn, S., Terziyska, V., Polcik, P., Kolozsvári, S., Mitterer, C. & Czettl, C., 2018, In: International journal of refractory metals & hard materials. p. 211-216

    Research output: Contribution to journal › Article › Research › peer-review

  27. 2017
  28. E-pub ahead of print

    Influence of Ar ion etching on the surface topography of cemented carbide cutting inserts

    Gassner, M., Schalk, N., Sartory, B., Pohler, M., Czettl, C. & Mitterer, C., 24 Aug 2017, (E-pub ahead of print) In: International journal of refractory metals & hard materials. 69.2017, December, p. 234-239 16 p.

    Research output: Contribution to journal › Article › Research › peer-review

  29. Published

    Fracture of severely plastically deformed Ta and Nb

    Hohenwarter, A., Wurster, S. & Völker, B., 1 Apr 2017, In: International Journal of Refractory Metals and Hard Materials. 64.2017, April, p. 143-150 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  30. Published

    Nanostructured coatings for tooling applications

    Köpf, A., Keckes, J., Todt, J., Pitonak, R. & Weissenbacher, R., 1 Jan 2017, In: International Journal of Refractory Metals and Hard Materials. 62.2017, January, Part B, p. 219-224 6 p.

    Research output: Contribution to journal › Article › Research › peer-review

  31. Published

    Strength of WC-Co hard metals as a function of the effectively loaded volume

    Jonke, M., Klünsner, T., Supancic, P., Harrer, W., Glätzle, J., Barbist, R. & Ebner, R., 2017, In: International journal of refractory metals & hard materials. 64, p. 219-224 6 p.

    Research output: Contribution to journal › Article › Research › peer-review

  32. 2016

  33. Ductilisation of tungsten (W) through cold-rolling: R-curve behaviour

    Reiser, J., Wurster, S., Hoffmann, J., Bonk, S., Bonnekoh, C., Kiener, D., Pippan, R., Hoffmann, A. & Rieth, M., 1 Aug 2016, In: International journal of refractory metals & hard materials. 58.2016, August, p. 22-33 12 p.

    Research output: Contribution to journal › Article › Research › peer-review

  34. Published

    Effect of reinforcement phase on the mechanical property of tungsten nanocomposite synthesized by spark plasma sintering

    Lee, J. K., Kim, S. Y., Ott, R. T., Kim, J. Y., Eckert, J. & Lee, M. H., 17 Jul 2016, In: International journal of refractory metals & hard materials. 54.2016, January, p. 14-18 5 p., 4109.

    Research output: Contribution to journal › Article › Research › peer-review

  35. 2015
  36. Published

    Orientation dependent recovery and recrystallization behavior of hot-rolled molybdenum

    Primig, S., Clemens, H., Knabl, W., Lorich, A. & Stickler, R., 2015, In: International journal of refractory metals & hard materials. 48, p. 179-186

    Research output: Contribution to journal › Article › Research › peer-review

  37. 2014
  38. Published

    Substitution of ThO2 by La2O3 additions in tungsten electrodes for atmospheric plasma spraying

    Heißl, M., Mitterer, C., Granzer, T., Schröder, J. & Kathrein, M., 2014, In: International journal of refractory metals & hard materials. 43, p. 181-185

    Research output: Contribution to journal › Article › Research › peer-review

  39. 2010
  40. Published

    Fracture toughness of polycrystalline tungsten alloys

    Pippan, R., Gludovatz, B., Wurster, S. & Hoffmann, A., 2010, In: International journal of refractory metals & hard materials. p. 674-678

    Research output: Contribution to journal › Article › Research › peer-review

  41. Published

    High temperature fracture experiments on tungsten–rhenium alloys

    Pippan, R., Wurster, S. & Gludovatz, B., 2010, In: International journal of refractory metals & hard materials. p. 692-697

    Research output: Contribution to journal › Article › Research › peer-review

  42. Published

    Meso-Scale Mechanical Testing Methods for Diamond Composite Materials

    Morrell, R., Danzer, R., Supancic, P., Harrer, W., Puchegger, S. & Peterlik, H., 2010, In: International journal of refractory metals & hard materials. 28, p. 508-515

    Research output: Contribution to journal › Article › Research › peer-review

  43. Published

    On the recrystallization behavior of technically pure molybdenum

    Primig, S., Leitner, H., Clemens, H., Lorich, A., Knabl, W. & Stickler, R., 2010, In: International journal of refractory metals & hard materials. p. 703-708

    Research output: Contribution to journal › Article › Research › peer-review

  44. Published

    Wear-resistant Ti-B-N nanocomposite coatings synthesized by reactive cathodic arc evaporation

    Neidhardt, J., Czigány, Z., Sartory, B., Tessadri, R. & Mitterer, C., 2010, In: International journal of refractory metals & hard materials. p. 23-31

    Research output: Contribution to journal › Article › Research › peer-review

  45. 2009
  46. Published

    The effect of increasing V content on structure, mechanical and tribological properties of arc evaporated Ti-AI-V-N coatings

    Pfeiler, M., Kutschej, K., Penoy, M., Michotte, C., Mitterer, C. & Kathrein, M., 2009, In: International journal of refractory metals & hard materials. 27, p. 502-506

    Research output: Contribution to journal › Article › Research › peer-review

  47. 2008
  48. Published

    Deposition of Ti–Al–N coatings by thermal CVD

    Wagner, J., Edlmayr, V., Penoy, M., Michotte, C., Mitterer, C. & Kathrein, M., 2008, In: International journal of refractory metals & hard materials. 26, p. 563-568

    Research output: Contribution to journal › Article › Research › peer-review

  49. Published

    Direct carburation of tungsten blue oxide in a fluidized bed reactor

    Luidold, S. & Antrekowitsch, H., 2008, In: International journal of refractory metals & hard materials. 26, p. 324-328

    Research output: Contribution to journal › Article › Research › peer-review

  50. Published

    The effect of deposition temperature on microstructure and properties of thermal CVD TiN coatings

    Wagner, J., Mitterer, C., Penoy, M., Michotte, C., Wallgram, W. & Kathrein, M., 2008, In: International journal of refractory metals & hard materials. 26, p. 120-126

    Research output: Contribution to journal › Article › Research › peer-review

  51. 2007
  52. Published

    Production of niobium powder by magnesiothermic reduction of niobium oxides in a cyclone reactor

    Luidold, S., Antrekowitsch, H. & Ressel, R., 2007, In: International journal of refractory metals & hard materials. 25, p. 423-432

    Research output: Contribution to journal › Article › Research › peer-review

  53. 2006
  54. Published

    On the Development of Grain Growth Resistant Tantalum Alloys

    Bischof, M., Mayer, S., Leitner, H., Clemens, H., Staron, P., Geiger, E., Voiticek, A. & Knabl, W., 2006, In: International journal of refractory metals & hard materials. 24, p. 437-444

    Research output: Contribution to journal › Article › Research › peer-review

  55. 2005
  56. Published

    Passivity and pseudopassivity of cemented carbides

    Sutthiruangwong, S., Mori, G. & Koesters, R., 2005, In: International journal of refractory metals & hard materials. 23, p. 129-136

    Research output: Contribution to journal › Article › Research › peer-review

  57. 2003
  58. Published

    Corrosion properties of Co-based cemented carbides in acidic solutions

    Sutthiruangwong, S. & Mori, G., 2003, In: International journal of refractory metals & hard materials. p. 135-145

    Research output: Contribution to journal › Article › Research › peer-review

View graph of relations