X-ray nanodiffraction analysis of residual stresses in polysilicon electrodes of vertical power transistors

Publikationen: Beitrag in FachzeitschriftArtikelForschung(peer-reviewed)

Standard

X-ray nanodiffraction analysis of residual stresses in polysilicon electrodes of vertical power transistors. / Karner, Stefan; Blank, Oliver; Rösch, Maximilian et al.
in: Materialia, Jahrgang 24.2022, Nr. August, 101484, 20.06.2022.

Publikationen: Beitrag in FachzeitschriftArtikelForschung(peer-reviewed)

Vancouver

Karner S, Blank O, Rösch M, Burghammer M, Zalesak J, Keckes J et al. X-ray nanodiffraction analysis of residual stresses in polysilicon electrodes of vertical power transistors. Materialia. 2022 Jun 20;24.2022(August):101484. Epub 2022 Jun 20. doi: 10.1016/j.mtla.2022.101484

Author

Karner, Stefan ; Blank, Oliver ; Rösch, Maximilian et al. / X-ray nanodiffraction analysis of residual stresses in polysilicon electrodes of vertical power transistors. in: Materialia. 2022 ; Jahrgang 24.2022, Nr. August.

Bibtex - Download

@article{28c0b86f461a409faa57590195224bae,
title = "X-ray nanodiffraction analysis of residual stresses in polysilicon electrodes of vertical power transistors",
abstract = "The influence of residual stress concentrations on the mechanical stability and functional properties of vertical power transistors is not fully understood. In this work, residual stresses are analyzed in two polycrystalline Si electrodes using synchrotron X-ray nanodiffraction and finite element (FE) modeling. Diffraction scanning was performed over 42 transistors with a step size of 100 nm and the data were subsequently averaged in order to compensate for relatively poor diffraction statistics. The experiment revealed compressive in-plane and out-of-plane stresses of -185 to -225 MPa and -65 to -95 MPa, respectively, in the lower electrode and equiaxial tensile stresses of 70 to 150 MPa in the upper electrode, which appear to be dependent on doping and increase proportionally from compressive to tensile with the electrodes{\textquoteright} dimensions and grain size. The results are interpreted in terms of processing route and correlated with the FE simulation. The comparison shows overall good agreement for in-plane and out-of-plane residual stresses but indicates a limitation of the FE stress simulation regarding the impact of doping and grain size effects.",
author = "Stefan Karner and Oliver Blank and Maximilian R{\"o}sch and Manfred Burghammer and Jakub Zalesak and Jozef Keckes and Juraj Todt",
note = "Publisher Copyright: {\textcopyright} 2022",
year = "2022",
month = jun,
day = "20",
doi = "10.1016/j.mtla.2022.101484",
language = "English",
volume = "24.2022",
journal = "Materialia",
issn = "2589-1529",
publisher = "Elsevier",
number = "August",

}

RIS (suitable for import to EndNote) - Download

TY - JOUR

T1 - X-ray nanodiffraction analysis of residual stresses in polysilicon electrodes of vertical power transistors

AU - Karner, Stefan

AU - Blank, Oliver

AU - Rösch, Maximilian

AU - Burghammer, Manfred

AU - Zalesak, Jakub

AU - Keckes, Jozef

AU - Todt, Juraj

N1 - Publisher Copyright: © 2022

PY - 2022/6/20

Y1 - 2022/6/20

N2 - The influence of residual stress concentrations on the mechanical stability and functional properties of vertical power transistors is not fully understood. In this work, residual stresses are analyzed in two polycrystalline Si electrodes using synchrotron X-ray nanodiffraction and finite element (FE) modeling. Diffraction scanning was performed over 42 transistors with a step size of 100 nm and the data were subsequently averaged in order to compensate for relatively poor diffraction statistics. The experiment revealed compressive in-plane and out-of-plane stresses of -185 to -225 MPa and -65 to -95 MPa, respectively, in the lower electrode and equiaxial tensile stresses of 70 to 150 MPa in the upper electrode, which appear to be dependent on doping and increase proportionally from compressive to tensile with the electrodes’ dimensions and grain size. The results are interpreted in terms of processing route and correlated with the FE simulation. The comparison shows overall good agreement for in-plane and out-of-plane residual stresses but indicates a limitation of the FE stress simulation regarding the impact of doping and grain size effects.

AB - The influence of residual stress concentrations on the mechanical stability and functional properties of vertical power transistors is not fully understood. In this work, residual stresses are analyzed in two polycrystalline Si electrodes using synchrotron X-ray nanodiffraction and finite element (FE) modeling. Diffraction scanning was performed over 42 transistors with a step size of 100 nm and the data were subsequently averaged in order to compensate for relatively poor diffraction statistics. The experiment revealed compressive in-plane and out-of-plane stresses of -185 to -225 MPa and -65 to -95 MPa, respectively, in the lower electrode and equiaxial tensile stresses of 70 to 150 MPa in the upper electrode, which appear to be dependent on doping and increase proportionally from compressive to tensile with the electrodes’ dimensions and grain size. The results are interpreted in terms of processing route and correlated with the FE simulation. The comparison shows overall good agreement for in-plane and out-of-plane residual stresses but indicates a limitation of the FE stress simulation regarding the impact of doping and grain size effects.

U2 - 10.1016/j.mtla.2022.101484

DO - 10.1016/j.mtla.2022.101484

M3 - Article

VL - 24.2022

JO - Materialia

JF - Materialia

SN - 2589-1529

IS - August

M1 - 101484

ER -