Modelling and Simulation of Solidification of High Grade Steel Ingot Castings

Publikationen: Thesis / Studienabschlussarbeiten und HabilitationsschriftenDissertation

Standard

Modelling and Simulation of Solidification of High Grade Steel Ingot Castings. / Ishmurzin, Anton.
2009.

Publikationen: Thesis / Studienabschlussarbeiten und HabilitationsschriftenDissertation

Bibtex - Download

@phdthesis{656d24f27cb74d029be4f8d17b4ebcd5,
title = "Modelling and Simulation of Solidification of High Grade Steel Ingot Castings",
abstract = "In the work presented an approach to simulate ingot solidication of highly alloyed steels was developed. It includes simplied simulation of initial mould lling with the melt, followed by a subsequent simulation of the solidication course within the framework of multiphase multicomponent computational fluid dynamics. The multiphase multicomponent solidication model was developed, based on the previous models for binary alloys. In order to allow the multicomponent capability, the governing multiphase ow equations were reconsidered, that include equations describing conservation of mass, momentum, energy as well as alloying components (species) and grain density transport. Source terms for the equations were reformulated to reect multicomponent kinetic and thermodynamic relations. An approach to couple multicomponent/multiphase thermodynamics and kinetics with multiphase/multicomponent ow model was developed. It has a formof a nonlinear algebraic equation system, relating temperature and composition of the bulk melt with solid and liquid compositions at the interface at the solid-liquid phase interface. A Newton-type iterative method was used for solving the equation system. The coupling approach was validated using alloys from Fe-C-Cr, Fe-C-Mn and Cu-Sn-P systems. The necessary thermodynamic functions, the liquidus temperature and tie-line relations were approximated as piecewise-linear as well as interpolated using bivariate splines. The implementation of the model for ternary alloys was used for carrying out simulations of solidication of Fe-C-Cr alloys in two different ingot geometries taking into account two- and three-phase ow. The thermal convection was found to be the predominant effect inuencing the course of solidication, solutal convection did not inuence the solidication signicantly. The modelling and simulation methods of multiphase multicomponent alloy solidication presented can be used for simulation of a wide range of multicomponent solidication processes.",
keywords = "Computational Fluid Dynamics, Solidification, Modelling, Simulation, Ternary, Thermodynamics, multiphase, Erstarrung Simulation Modellierung Tern{\"a}r Thermodynamik Mehrphasenstr{\"o}mungsmechanik",
author = "Anton Ishmurzin",
note = "no embargo",
year = "2009",
language = "English",

}

RIS (suitable for import to EndNote) - Download

TY - BOOK

T1 - Modelling and Simulation of Solidification of High Grade Steel Ingot Castings

AU - Ishmurzin, Anton

N1 - no embargo

PY - 2009

Y1 - 2009

N2 - In the work presented an approach to simulate ingot solidication of highly alloyed steels was developed. It includes simplied simulation of initial mould lling with the melt, followed by a subsequent simulation of the solidication course within the framework of multiphase multicomponent computational fluid dynamics. The multiphase multicomponent solidication model was developed, based on the previous models for binary alloys. In order to allow the multicomponent capability, the governing multiphase ow equations were reconsidered, that include equations describing conservation of mass, momentum, energy as well as alloying components (species) and grain density transport. Source terms for the equations were reformulated to reect multicomponent kinetic and thermodynamic relations. An approach to couple multicomponent/multiphase thermodynamics and kinetics with multiphase/multicomponent ow model was developed. It has a formof a nonlinear algebraic equation system, relating temperature and composition of the bulk melt with solid and liquid compositions at the interface at the solid-liquid phase interface. A Newton-type iterative method was used for solving the equation system. The coupling approach was validated using alloys from Fe-C-Cr, Fe-C-Mn and Cu-Sn-P systems. The necessary thermodynamic functions, the liquidus temperature and tie-line relations were approximated as piecewise-linear as well as interpolated using bivariate splines. The implementation of the model for ternary alloys was used for carrying out simulations of solidication of Fe-C-Cr alloys in two different ingot geometries taking into account two- and three-phase ow. The thermal convection was found to be the predominant effect inuencing the course of solidication, solutal convection did not inuence the solidication signicantly. The modelling and simulation methods of multiphase multicomponent alloy solidication presented can be used for simulation of a wide range of multicomponent solidication processes.

AB - In the work presented an approach to simulate ingot solidication of highly alloyed steels was developed. It includes simplied simulation of initial mould lling with the melt, followed by a subsequent simulation of the solidication course within the framework of multiphase multicomponent computational fluid dynamics. The multiphase multicomponent solidication model was developed, based on the previous models for binary alloys. In order to allow the multicomponent capability, the governing multiphase ow equations were reconsidered, that include equations describing conservation of mass, momentum, energy as well as alloying components (species) and grain density transport. Source terms for the equations were reformulated to reect multicomponent kinetic and thermodynamic relations. An approach to couple multicomponent/multiphase thermodynamics and kinetics with multiphase/multicomponent ow model was developed. It has a formof a nonlinear algebraic equation system, relating temperature and composition of the bulk melt with solid and liquid compositions at the interface at the solid-liquid phase interface. A Newton-type iterative method was used for solving the equation system. The coupling approach was validated using alloys from Fe-C-Cr, Fe-C-Mn and Cu-Sn-P systems. The necessary thermodynamic functions, the liquidus temperature and tie-line relations were approximated as piecewise-linear as well as interpolated using bivariate splines. The implementation of the model for ternary alloys was used for carrying out simulations of solidication of Fe-C-Cr alloys in two different ingot geometries taking into account two- and three-phase ow. The thermal convection was found to be the predominant effect inuencing the course of solidication, solutal convection did not inuence the solidication signicantly. The modelling and simulation methods of multiphase multicomponent alloy solidication presented can be used for simulation of a wide range of multicomponent solidication processes.

KW - Computational Fluid Dynamics

KW - Solidification

KW - Modelling

KW - Simulation

KW - Ternary

KW - Thermodynamics

KW - multiphase

KW - Erstarrung Simulation Modellierung Ternär Thermodynamik Mehrphasenströmungsmechanik

M3 - Doctoral Thesis

ER -