The Fossil, the Green, and the In-Between: Life Cycle Assessment of Manufacturing Composites with Varying Bio-Based Content

Kirschnick, U., Ravindran, B., Sieberer, M., Fauster, E. & Feuchter, M., 20 Feb. 2025, in: Journal of composites science. 9.2025, 3, 18 S., 93.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

A New Approach Using Multi-Layer Films from Food Waste as a Shrink Film

Plevová, K., Feuchter, M., Wild, N. & Resch-Fauster, K., 17 Feb. 2025, in: Processes. 13.2025, 2, 16 S., 560.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

On the effect of isotropic and anisotropic dissipative response functions with associated and nonassociated flow on the inelastic behavior of polymeric composites

Gaddikere Nagaraja, S., Antretter, T. & Schuecker, C., 16 Feb. 2025, in: Mechanics of advanced materials and structures. ??? Stand: 27. März 2025, ??? Stand: 27. März 2025, 17 S.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Tailored Recycled Composites: Enhancing the Performance of Injection Moulded Post-Consumer Polypropylene Composites Using Box-Behnken Design

Shahroodi, Z., Zidar, D., Momeni, V., Arbeiter, F., Duretek, I., Krempl, N., Berger-Weber, G. & Holzer, C., 15 Feb. 2025, in: Polymer Testing. 144.2025, March, 13 S., 108743.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Frontal polymerization of thiol-acrylate covalent adaptable networks

Schmidleitner, C., Kriehuber, M. U., Korotkov, R., Schlögl, S. & Rossegger, E., 14 Jan. 2025, in: Polymer Chemistry. 16.2025, 8, S. 963-971 9 S.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Effect of Encapsulant Degradation on Photovoltaic Modules Performances Installed in Different Climates

Barretta, C., Macher, A., Köntges, M., Ascencio-Vasquez, J., Topic, M. & Oreski, G., 9 Jan. 2025, in: IEEE Journal of Photovoltaics. 15.2025, 2, S. 290-296 7 S.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Very high cycle fatigue properties of short glass fiber reinforced polyetheretherketone (PEEK)

Fitzka, M., Stadler, G., Schönbauer, B. M., Pinter, G. & Mayer, H., Jan. 2025, in: International Journal of Fatigue. 190.2025, January, 8 S., 108652.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

3D-Printed Acrylated Soybean Oil Scaffolds with Vitrimeric Properties Reinforced by Tellurium-Doped Bioactive Glass

Bergoglio, M., Kriehuber, M., Sölle, B., Rossegger, E., Schlögl, S., Najmi, Z., Cochis, A., Ferla, F., Miola, M., Vernè, E. & Sangermano, M., 23 Dez. 2024, in: Polymers. 16.2024, 24, 19 S., 3614.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Strain rate-dependent failure modes of material extrusion-based additively manufactured PETG: A study on crack deflection and penetration

Waly, C., Schulnig, S. & Arbeiter, F., 18 Dez. 2024, in: Theoretical and Applied Fracture Mechanics. 136.2025, April, 15 S., 104834.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Surface Functionalization of Activated Carbon: Coupling of 3-(Aminopropyl)trimethoxysilane and (3-Glycidyloxypropyl)trimethoxysilane

Pustahija, L., Bandl, C., Alem, S. A. A. & Kern, W., 12 Dez. 2024, in: C-Journal of Carbon Research. 10.2024, 4, 16 S., 104.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Lead-free dielectric thin films: Synthesis of Ag(Nb1−xTax)O3 via reactive dc magnetron sputtering

Kölbl, L., Mehrabi, M., Griesser, T., Munnik, F. & Mitterer, C., 6 Dez. 2024, in: Journal of vacuum science & technology / A (JVST). 43.2024, 1, 11 S.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Wavelength-Dependent Dynamic Behavior in Thiol-Ene Networks Based on Disulfide Exchange

Sölle, B., Schmallegger, M., Schlögl, S. & Rossegger, E., 1 Dez. 2024, in: Journal of the American Chemical Society. 146.2024, 49, S. 34152–34157 6 S.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Deformation and fracture of lithosphere-inspired polymeric multi-layer composites

Waly, C., Höller, R., Griesser, T. & Arbeiter, F., Dez. 2024, in: Results in Engineering. 24.2024, December, 9 S., 103519.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Enhancement of copper nanoparticle yield in magnetron sputter inert gas condensation by applying substrate bias voltage and its influence on thin film morphology

Knabl, F., Gutnik, D., Patil, P., Bandl, C., Vermeij, T., Pichler, C. M., Putz, B. & Mitterer, C., Dez. 2024, in: Vacuum. 230, 113724.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Advancing the next generation of high-performance metal matrix composites through metal particle reinforcement

Alem, S. A. A., Sabzvand, M. H., Govahi, P., Poormehrabi, P., Hasanzadeh Azar, M., Salehi Siouki, S., Rashidi, R., Angizi, S. & Bagherifard, S., 27 Nov. 2024, in: Advanced Composites and Hybrid Materials. 8.2025, 1, 68 S., 3.

Publikationen: Beitrag in Fachzeitschrift › Übersichtsartikel › (peer-reviewed)

Data-driven evaluation of the Paris’ law parameters in polyethylene pipe grades — Increasing the precision of fracture mechanical lifetime estimation

Messiha, M., Wiener, J., Arbeiter, F. & Pinter, G., 25 Nov. 2024, in: Engineering Fracture Mechanics. 311.2024, 25 November, 18 S., 110540.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Light-Driven, Reversible Spatiotemporal Control of Dynamic Covalent Polymers

Reisinger, D., Sietmann, A., Das, A., Plutzar, S., Korotkov, R., Rossegger, E., Walluch, M., Holler-Stangl, S., Hofer, T. S., Dielmann, F., Glorius, F. & Schlögl, S., 21 Nov. 2024, in: Advanced materials. 36.2024, 47, 2411307.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

A new ISO standard for the experimental characterization of in-plane permeability of fibrous reinforcements

May, D., Advani, S. G., Duhovic, M., Endruweit, A., Fauster, E., George, A., Liotier, P. J., Lira, C., Lomov, S. V., Pucci, M. F., Schmeer, S., Abliz, D., Berg, D. C., Binetruy, C., Bodaghi, M., Comas-Cardona, S., Etchells, M., Govignon, Q., Koorevaar, A. & Michaud, V. &9 mehr, Park, C. H., Schubnel, R., Sousa, P., Ravel, R., Rouhi, M., Syerko, E., Umer, R., Vollmer, M. & Yong, A., 20 Nov. 2024, in: Composites Part A: Applied Science and Manufacturing. 190.2025, March, 13 S., 108592.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Enhanced hydrogen gas barrier properties in highly filled acrylonitrile butadiene rubber with high aspect ratio filler

Clute, C., Hafner, T., Balasooriya, W., Kaiser, A., Pinter, G. & Schlögl, S., 19 Nov. 2024, in: International Journal of Hydrogen Energy. 91.2024, 19 November, S. 404-411 8 S.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

An optimization strategy for customizable global elastic deformation of unit cell-based metamaterials with variable material section discretization

Thalhamer, A., Fleisch, M., Schuecker, C., Fuchs, P. F., Schlögl, S. & Berer, M., 12 Nov. 2024, in: Advances in Engineering Software. 199.2025, January, 17 S., 103817.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Design of photocurable thiol-epoxy resins for the processing of vitrimers with vat photopolymerisation 3D printing

Gaca, S., Dietliker, K., Rossegger, E. & Schlögl, S., 30 Okt. 2024, in: Reactive and Functional Polymers. 205.2024, December, 9 S., 106085.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Investigating the influence of bending stiffness and processing parameters on single-leg bending geometries of additively manufactured composites

Stiller, T., Kerschbaumer, R. C., Waly, C., Zink, B., Slapnik, J. & Pinter, G., 30 Okt. 2024, in: Results in Engineering. 24.2024, December, 10 S., 103276.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Shrouding Gas Plasma Deposition Technique for Developing Low-Friction, Wear-Resistant WS2-Zn Thin Films on Unfilled PEEK: The Relationship Between Process and Coating Properties

Kopp, D., Bandl, C., Kaindl, R., Prethaler, T., Coclite, A. M. & Waldhauser, W., 27 Okt. 2024, in: Coatings. 14.2024, 11, 18 S., 1365.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Self-healable epoxy/graphene oxide vitrimers and their recyclable glass fiber reinforced composites

Sharma, H., Bijalwan, V., Mourad, A. H. I., Kumar, A., Schlögl, S. & Rana, S., 24 Okt. 2024, in: Journal of Reinforced Plastics and Composites. ??? Stand: 10. Februar 2025, ??? Stand: 10. Februar 2025, 17 S.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Efficient surface defect detection in industrial screen printing with minimized labeling effort

Krassnig, P. J., Haselmann, M., Kremnitzer, M. & Gruber, D. P., 18 Okt. 2024, in: Integrated computer-aided engineering. 32.2025, 1, S. 1-21 21 S.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Effect of Epoxy Chain Extender and Multiple Processing on Poly-(R)-3-Hydroxybutyrate’s Properties

Hinterberger, K., Main, P., Waly, C. & Lucyshyn, T., 4 Okt. 2024, in: Journal of polymers and the environment. 33.2025, January, S. 112-124 13 S.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Synthesis and Characterization of Rebondable Polyurethane Adhesives Relying on Thermo-Activated Transcarbamoylation

Bautista-Anguís, D., Reiner, L., Röper, F., Maar, S., Wolfahrt, M., Wolfberger, A. & Schlögl, S., 3 Okt. 2024, in: Polymers. 16.2024, 19, 13 S., 2799.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Characterisation of the Mechanical Properties of Natural Fibre Polypropylene Composites Manufactured with Automated Tape Placement

Legenstein, A., Haiden, L., Feuchter, M. & Fauster, E., 1 Okt. 2024, in: Journal of composites science. 8.2024, 10, 21 S., 396.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Investigating the impact of manufacturing conditions on crack growth rate in nitrile butadiene rubber for enhanced service life – Part 02: Crosslink density via multi-stage swelling analysis

Gehling, T., Kerschbaumer, R. C., Pinter, G., Fasching, M. A., Schwarz, T. & Schieppati, J., 26 Sept. 2024, in: Polymer. 312.2024, 24 October, 12 S., 127661.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Sputter deposited silver niobate thin films: Pathway towards phase purity

Kölbl, L., Kobald, A., Griesser, T., Munnik, F. & Mitterer, C., 15 Sept. 2024, in: Thin solid films. 804.2024, 15 September, 9 S., 140505.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Supportless lattice structure of 316L stainless steel fabricated by material extrusion additive manufacturing: Effect of relative density on physical, microstructural and mechanical behaviour

Parsompech, N., Suwanpreecha, C., Noraphaiphipaksa, N., Hararak, B., Songkuea, S., Schuschnigg, S., Kukla, C., Kanchanomai, C. & Manonukul, A., 14 Sept. 2024, in: Materials Science and Engineering: A. 915.2024, November, 14 S., 147270.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Enhance hydrogen storage in lightweight solid-state systems based on Poly (vinylnaphthalene)

Sharifian, M., Kern, W., Rieß, G. & Kostoglou, N., 10 Sept. 2024, in: International Journal of Hydrogen Energy . 87.2024, 18 October, S. 713-721 9 S.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Three-dimensional mechanical metamaterial with tunable engineering constants in a broad range

Fleisch, M., Pinter, G., Schlögl, S. & Berer, M., 5 Sept. 2024, in: Results in Engineering. 23.2024, September, 4 S., 102860.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Microscale manipulation of bond exchange reactions in photocurable vitrimers with a covalently attachable photoacid generator

Korotkov, R., Alabiso, W., Jelinek, A., Schmallegger, M., Li, Y., Schlögl, S. & Rossegger, E., 3 Sept. 2024, in: Chemical science. 15.2024, 39, S. 16271-16280 10 S.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Spritzgießcompoundieren im Recycling von Post-Consumer PP Abfällen

Zidar, D., Krempl, N., Shahroodi, Z., Kirschnick, U. & Holzer, C., 1 Sept. 2024, in: Jahresmagazin Kunststofftechnik : Ingenieurwissenschaften ... : im Fokus . 2024, 01, S. 38-42 5 S.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung

Reprocessable carbon fiber vitrimer composites: Reclamation and reformatting of carbon fibers for second generation composite materials

Sharma, H., Bender, M., Kim, G., Lee, D., Caglayan, C., Schlögl, S., Yun, G. J., Kumar, A. & Rana, S., 24 Aug. 2024, in: Journal of Applied Polymer Science. 141.2024, 41, 15 S., e56074.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Fatigue investigations of elastomers developed for high-pressure hydrogen gas environments

Schieppati, J., Balasooriya, W., Huber, P. A. H. & Pinter, G., 19 Aug. 2024, in: International Journal of Fatigue. 189.2024, December, 10 S., 108563.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Selecting the suitable thermoplastic elastomer as the main component in the feedstock for metal material extrusion of aluminium

Momeni, V., Shahroodi, Z., Hufnagl, M., Gonzalez-Gutierrez, J., Duretek, I., Schuschnigg, S., Kukla, C. & Holzer, C., 8 Aug. 2024, in: Results in Engineering. 23.2024, September, 12 S., 102692.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Waste-to-Value Feasibility Study: Assessing the Viability and Quality of Incorporating Different Postindustrial Glass-Fiber Composites into Postconsumer Recycled Polypropylene

Shahroodi, Z., Krempl, N., Zidar, D., Mayrhofer, T., Kirschnick, U., Arbeiter, F., Duretek, I. & Holzer, C., 7 Aug. 2024, in: ACS Sustainable Chemistry and Engineering. 12.2024, 33, S. 12619-12631 13 S.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Fatigue and residual strain monitoring for thermoplastic composite using embedded FBG inscribed in highly-birefringent side-hole elliptical core optical fiber

Wachtarczyk, K., Yadav, N., Błachut, A., Gąsior, P., Schledjewski, R. & Kaleta, J., 27 Juli 2024, in: Measurement. 238.2024, October, 14 S., 115404.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

The Need for Properly Designed Synthesized Micro- and Nanoplastics with Core–Shell Structure

Galakhova, A., Meisel, T. C. & Rieß, G., 27 Juli 2024, in: Microplastics. 3.2024, 3, S. 433-448 16 S.

Publikationen: Beitrag in Fachzeitschrift › Übersichtsartikel › (peer-reviewed)

Manufacturing bio-based fiber-reinforced polymer composites: Process performance in RTM and VARI processes

Kirschnick, U., Feuchter, M., Ravindran, B., Salzmann, M., Duretek, I., Fauster, E. & Schledjewski, R., 19 Juli 2024, in: Advanced Manufacturing: Polymer and Composites Science. 10.2024, 1, 12 S., 2379205.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Optimization Strategy for Process Design in Rubber Injection Molding: A Simulation-Based Approach Allowing for the Prediction of Mechanical Properties of Vulcanizates

Traintinger, M., Azevedo, M., Kerschbaumer, R. C., Lechner, B. & Lucyshyn, T., 17 Juli 2024, in: Polymers. 16.2024, 14, 20 S., 2033.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Binder System Composition on the Rheological and Magnetic Properties of Nd-Fe-B Feedstocks for Metal Injection Molding

Momeni, V., Luca, S., Gonzalez-Gutierrez, J., Cano, S., Sueur, E., Shahroodi, Z., Schuschnigg, S., Kukla, C. & Holzer, C., Juli 2024, in: Applied Sciences (Switzerland). 14.2024, 13, 15 S., 5638.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Characterization of atmospheric pressure plasma deposited (APPD) coatings to improve the friction behavior of thermoplastic surfaces

Gleirscher, M., Kopp, D., Hausberger, A., Angerer, P., Lackner, J. & Schlögl, S., 23 Juni 2024, in: Surface and Coatings Technology. 488.2024, 30 July, 16 S., 131040.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Dual cross-linking of XNBR latex with epoxy-functional calcium silicate particles for the production of accelerator-free medical gloves

Grabmayer, T., Manhart, J., Fleischmann, D., Kaiser, S., Schaller, R., Holzner, A. & Schlögl, S., 20 Juni 2024, in: Journal of applied polymer science. 141.2024, 24, 12 S., e55498.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Reshapable bio-based thiol-ene vitrimers for nanoimprint lithography: Advanced covalent adaptability for tunable surface properties

Sölle, B., Reisinger, D., Heupl, S., Jelinek, A., Schlögl, S. & Rossegger, E., 8 Juni 2024, (Elektronische Veröffentlichung vor Drucklegung.) in: Reactive & functional polymers. 202.2024, September, 8 S., 105972.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Near-infrared spectroscopy in resin transfer molding—determination of the degree of cure

Salzmann, M., Märzinger, W., Teuchtmann, M., Ravindran, B., Kirschnick, U. & Fauster, E., Juni 2024, in: International Journal of Advanced Manufacturing Technology. 132.2024, 11-12, S. 5557-5565 9 S.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Probing local adhesion: A miniaturized multi-photon lithography design demonstrated on silanized vs. untreated surfaces

Jelinek, A., Rossegger, E., Schlögl, S., Kiener, D. & Alfreider, M., Juni 2024, in: Materials and Design. 242.2024, June, 13 S., 112994.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Multi-Material 3D Printing of Biobased Epoxy Resins

Bergoglio, M., Rossegger, E., Schlögl, S., Griesser, T., Waly, C., Arbeiter, F. & Sangermano, M., 27 Mai 2024, in: Polymers. 16.2024, 11, 18 S., 1510.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Magnetospheric Venus Space Explorers (MVSE) mission: A proposal for understanding the dynamics of induced magnetospheres

Albers, R., Andrews, H., Boccacci, G., Castro Pires, V. D., Laddha, S., Lundén, V., Maraqten, N., Matias, J., Krämer, E., Schulz, L., Palanca, I. T., Teubenbacher, D., Baskevitch, C., Covella, F., Cressa, L., Moreno, J. G., Gillmayr, J., Hollowood, J., Huber, K. & Kutnohorsky, V. &10 mehr, Lennerstrand, S., Malatinszky, A., Manzini, D., Maurer, M., Nidelea, D. M. A., Rigon, L., Sinjan, J., Suarez, C., Viviano, M. & Knutsen, E. W., 19 Mai 2024, (Elektronische Veröffentlichung vor Drucklegung.) in: Acta astronautica. 221.2024, August, S. 194-205 12 S.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Feasibility study on the production of low melt flow rate recycled polypropylene from postconsumer waste

Geier, J., Barretta, C., Hinczica, J., Haar, B., Bredács, M., Witschnigg, A., Mayrbäurl, E. & Oreski, G., 15 Mai 2024, in: Journal of applied polymer science. 141.2024, 30, 14 S., e55694.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Increasing the melt viscosity of post-consumer recycled polypropylene via E-Beam techniques

Krämer, J., Guedes de la Cruz, G. D. C., Kern, W., Roitner, J., Witschnigg, A., Rittmannsberger, F. & Schnetzinger, K., 14 Mai 2024, (Elektronische Veröffentlichung vor Drucklegung.) in: Radiation physics and chemistry. 222.2024, September, 6 S., 111846.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Effect of mechanical recycling on short glass fibre reinforced polyamide 6,6 from post-industrial waste

Salvi, A., Lucyshyn, T., Marano, C., Ostrowska, M., Vangosa, F. B., Dotelli, G. & Holzer, C., 8 Mai 2024, in: AIP Conference Proceedings. 3158, 1, 120005.

Publikationen: Beitrag in Fachzeitschrift › Konferenzartikel › (peer-reviewed)

Multi-Material Implant Structures with Medical-Grade Polyurethane via Additive Manufacturing

Hentschel, L., Petersmann, S., Gradischar, A., Lebschy, C., Lindenmann, J., Smolle-Juettner, F., Gonzalez-Gutierrez, J., Dias, A., Kynast, F., Hammer, N., Schäfer, U. & Holzer, C., 8 Mai 2024, in: AIP Conference Proceedings. 3158, 1, 150005.

Publikationen: Beitrag in Fachzeitschrift › Konferenzartikel › (peer-reviewed)

Morphological structure and mechanical properties of a nucleated Polyoxymethylene (POM) homopolymer resin processed under conventional injection molding conditions

Schrank, T., Ramoa, B., Feuchter, M., Pinter, G., Pantani, R. & Berer, M., 7 Mai 2024, (Elektronische Veröffentlichung vor Drucklegung.) in: Polymer Testing. 134.2024, May, 13 S., 108444.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Cationic UV-curing of bio-based epoxidized castor oil vitrimers with electrically conductive properties

Bergoglio, M., Palazzo, G., Reisinger, D., Porcarello, M., Kortaberria, G., Schlögl, S. & Sangermano, M., 5 Mai 2024, (Elektronische Veröffentlichung vor Drucklegung.) in: Reactive & functional polymers. 200.2024, July, 9 S., 105936.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Laser-induced graphene formation on different wood species: Dependence of electronic performance on intrinsic features of certain types of wood

Lengger, S. K., Neumaier, L., Haiden, L., Feuchter, M., Griesser, T. & Kosel, J., 4 Mai 2024, (Elektronische Veröffentlichung vor Drucklegung.) in: Sustainable Materials and Technologies. 40.2024, July, 11 S., e00936.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Evaluation of existing and introduction of new incremental crack propagation approaches in FEM

Pletz, M., Frankl, S. M. & Schuecker, C., 3 Mai 2024, in: Theoretical and Applied Fracture Mechanics. 131.2024, June, 11 S., 104452.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Design of Reversible Adhesives by Using a Triple Function of Ionic Liquids

Wanghofer, F., Kriehuber, M., Reisinger, D., Floh, F., Wolfahrt, M. & Schlögl, S., 2 Mai 2024, (Elektronische Veröffentlichung vor Drucklegung.) in: Macromolecular materials and engineering. 309.2024, 9, 9 S., 2400011.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Effect of Flashlamp Heating System Parameters on the Wedge Peel Strength of Thermoplastic Carbon Fiber Tape in the Automated Tape Placement Process

Legenstein, A. & Fauster, E., 29 Apr. 2024, in: Journal of Manufacturing and Materials Processing. 8.2024, 3, 17 S., 91.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)