Research output

1 - 100 out of 32,757Page size: 100
rss feed
Sort by: Title
  1. Published

    "2D simulation of ESR process"

    Karimi Sibaki, E., Kharicha, A. & Wu, M., 2013

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  2. Published

    "2sDR"-A simultaneous recovery of various heavy metals from EAFD´s

    Rösler, G., 2014.

    Research output: Contribution to conference › Poster › Research › peer-review

  3. Published

    "A meandering sinking flow as possible explanation for the thermohaline staircaises in oceans"

    Kharicha, A., Stefan Kharicha, M., Ludwig, A. & Wu, M., 2013, "A meandering sinking flow as possible explanation for the thermohaline staircaises in oceans".

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  4. Published

    "A parameter study on the effect of slag electrode conductivity on the solidification of a large scale ESR ingot"

    Karimi Sibaki, E., Kharicha, A., Wu, M., Ludwig, A., Holzgruber, H., Ofner, B. & Ramprecht, M., 2014, 2nd Int. Conf. Ingot Casting Rolling Forging, on data storage device..

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  5. Published

    "Automatisierte Prozesskettensimulation (MCL: A1.17)",

    Holzmann, T., 2014

    Research output: Book/Report › Commissioned report › Transfer

  6. Published

    "Calculation of Flow Around a Car Body with Various Turbulence Models"

    Brandstätter, W. & Bachler, G., 1996, "Calculation of Flow Around a Car Body with Various Turbulence Models". p. 0-0

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  7. Published

    "Chromite and platinum-group element mineralization in ultramafic rocks of the Speik Complex, Eastern Alps"

    Melcher, F., Puhl, J., Mali, H. & Meisel, T., 1999, "Mineral Deposits: Processes to Processing". p. 739-742

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  8. Published

    "Contribution of the Mould Current to the Ingor Surface quality in the Electroslag Remelting Process"

    Kharicha, A., Karimi Sibaki, E., Wu, M. & Ludwig, A., 2013, "Contribution of the Mould Current to the Ingor Surface quality in the Electroslag Remelting Process". p. 95-99

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  9. Published

    "Conveyor Park" - Technisch/wirtschaftliche Untersuchungen an neuartigen Stetigförderern

    Kessler, F. & Grabner, K., 1999, In: Forschungsinformationen aus der Montanuniversität Leoben. 01.01.1999, p. 15-18

    Research output: Contribution to journal › Article › Research › peer-review

  10. Published

    "Corporate Innovation" - Management von Innovationen im Konzern

    Wipplinger, A. C., 2005

    Research output: Thesis › Doctoral Thesis

  11. Published

    "Determination of osmium and other platinum group elements (PGE) in chromitites by acid digestion and ICP-MS"

    Meisel, T. & Moser, J., 1999.

    Research output: Contribution to conference › Poster › Research › peer-review

  12. Published

    "Discrete Phase Modelling for Continuous Casting: Model Verification and Application"

    Vakhrushev, A., Ludwig, A., Wu, M., Tang, Y., Nitzl, G. & Hackl, G., 2013, "Discrete Phase Modelling for Continuous Casting: Model Verification and Application".

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  13. Published

    "Dislocation movement induced by molecular relaxations in isotactic polypropylene"

    Spieckermann, F., Polt, G., Wilhelm, H., Kerber, M., Schafler, E., Reinecker, M., Soprunyuk, V., Bernstorff, S. & Zehetbauer, M., 15 Sept 2016.

    Research output: Contribution to conference › Poster › Research › peer-review

  14. Published

    "Entwicklung eines Gießsystems für ein Sandgußdemonstratorbauteil mit Hilfe numerischer Simulation (MCL: A1.17)"

    Holzmann, T., 2014

    Research output: Book/Report › Commissioned report › Transfer

  15. Published

    "Errors" in highly siderophile element determination

    Meisel, T., 2002, Highly siderophile elements in terrestrial and meteoritic samples: implications for planetary differentiation and igneous processes. 1 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  16. Published

    "Evaluation of GWDC/ZPEB Drilling Contractor Performance on OMV Operations"

    Ladenhauf, J., 2006

    Research output: Thesis › Diploma Thesis

  17. Published

    "Evaluation of a 5-phase mixed columnar-equiaxed solidification model with a benchmark solidification experiment of NH4Cl-H2O solution

    Ahmadein, M., Wu, M., Stefan Kharicha, M., Kharicha, A. & Ludwig, A., 2013.

    Research output: Contribution to conference › Poster › Research › peer-review

  18. Published

    "Examination of the root-strength of VAA350+ hypoid gears with different case hardening considerations

    Haberer, C. & Leitner, H., 2007

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  19. Published

    "Experimental verification of the 3-phase continuous casting simulation using a water model"

    Vakhrushev, A., Ludwig, A. & Wu, M., 2014, 8th European Continuous Casting Conf. on data storage device.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  20. Published

    "Feinabstimmung des Teilmodells" Projekt MCL M8

    Hatzenbichler, T., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  21. Published

    "Feststoffturbine" im Praxistest

    Prenner, M. & Kessler, F., 2014, Tagungsbericht 19. Fachtagung Schüttgutfördertechnik 2014. p. IV-1-IV-25

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  22. Published

    "Feststoffturbine" zur Optimierung des Energieverbrauches von stetigen Fördersystemen

    Prenner, M., 2012, 17. Fachtagung Schüttguttechnik - Neues aus Wissenschaft und Praxis. p. V-V-18

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  23. Published

    "Flexibility" of refractories - fracture mechanical and microscopic investigations

    Harmuth, H., 2010, Proceedings of the International Scientific Conference Refractories, Furnaces and Thermal Insulations. p. 36-41

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  24. Published

    "Fracking" hat lange Tradition

    Hofstätter, H., 2012, In: Kurier. 24.07.2012

    Research output: Contribution to journal › Article › Research › peer-review

  25. Published

    "Free surface deformation by the application of electrical currents"

    Kharicha, A., Teplyakov, I., Ivochkin, Y., Wu, M., Ludwig, A. & Guseva, A., 2014, 9th Int. Pamir Conf. on Fundamental and applied MHD, Thermo acoustic and Space technologies. p. 245-249

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  26. Published

    "Geochemische Characteristika von ultramafischen Gesteinen der Ostalpen"

    Puhl, J., Melcher, F. & Meisel, T., 1998, In: Mitteilungen der Österreichischen Mineralogischen Gesellschaft. 143, p. 366-368

    Research output: Contribution to journal › Article › Research › peer-review

  27. Published

    "Green Steel" - Stahlproduktion geht effizienter; Luft verschafft Abkühlung

    Doschek, K., Jan 2015, In: UmweltJournal : Fachzeitschrift für Umwelttechnik, Energie und Abfallwirtschaft. p. 2-2

    Research output: Contribution to journal › Article › Research › peer-review

  28. Published

    "How to get a smooth ESR Ingot surface?"

    Kharicha, A., Karimi Sibaki, E., Wu, M. & Ludwig, A., 2014, 2nd Int. Conf. Ingot Casting Rolling Forging on data storage device..

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  29. Published

    "In-line" quality control of polymer nanocomposites using near-infrared spectroskopy

    Laske, S., Kracalik, M. & Holzer, C., 2009, Conference Proceedings NanoCon 2009 1st Conference with international participation. p. 38-39

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  30. Published

    "Influence of nucleation and drednrite fragmentation on as-cast structure of Sn-10.0wt.Pb benchmark.

    Zheng, Y., Kharicha, A. & Ludwig, A., 2018, p. 226. 231 p.

    Research output: Contribution to conference › Paper › peer-review

  31. Published

    "Lévy Prozess Simulation"

    Simonov, I., 2012.

    Research output: Contribution to conference › Poster › Research › peer-review

  32. Published

    "Lévy Prozess Simulation"

    Simonov, I., 2012.

    Research output: Contribution to conference › Poster › Research › peer-review

  33. Published

    "MHD in electric current-induced flow"

    Kharicha, A., Wu, M. & Ludwig, A., 2013

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  34. Published

    "MHD instabilities of bath/liquid metal interface”

    Kharicha, A., Ludwig, A. & Wu, M., 2013, "MHD instabilities of bath/liquid metal interface”.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  35. Published

    "MayRec" - Recyclinganlage der Zukunft

    Winkler, C., 2016

    Research output: Thesis › Master's Thesis

  36. Published

    "Minutes of the autumn meeting on project "Importance of Hydrodynamics In Peritectic Steel Thin Slab Casting"

    Vakhrushev, A., Ludwig, A. & Wu, M., 2013

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  37. Published

    "Minutes of the fall meeting on project "Electromagnetic processing of dual-phase fluids"

    Karimi Sibaki, E., Wu, M. & Ludwig, A., 2013

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  38. Published

    "Modelling and Simulation of Thin-Slap Casting"

    Vakhrushev, A. & Wu, M., 2013

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  39. Published

    "Numerical and experimental study of Horizontal Centrifugal Casting (MCL: A1.16)"

    Bohacek, J., Kharicha, A. & Ludwig, A., 2014

    Research output: Book/Report › Commissioned report › Transfer

  40. Published

    "Numerical modeling of centrifugal casting: FLUENT vs. own code in MATLAB"

    Bohacek, J., Kharicha, A., Ludwig, A. & Wu, M., 2013

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  41. Published

    "Numerical study of horizontal centrifugal casting of HSS work roll"

    Bohacek, J., Ludwig, A. & Kharicha, A., 2013, "Numerical study of horizontal centrifugal casting of HSS work roll".

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  42. Published

    "Numerical study of macrosegregation in steel ingot"

    Li, J. & Wu, M., 2013

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  43. Published

    "Optimization and Modelling of the Electrolyte Flow in a Conventional Copper Electrorefining Cell"

    Kemminger, A. & Ludwig, A., 2013

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  44. Published

    "Parameter study of large scale ESR process"

    Karimi Sibaki, E., Kharicha, A. & Wu, M., 2013

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  45. Published

    "Petrographische und geochemische Untersuchungen an Charnockitischen Gneisen und deren Begleitserien im Süden von Minas Gerais, Brasilien"

    Engler, A., Koller, F., Quéméneur, J. & Meisel, T., 1998, In: Mitteilungen der Österreichischen Mineralogischen Gesellschaft. 143, p. 263-264

    Research output: Contribution to journal › Article › Research › peer-review

  46. Published

    "Photo-switchable polymer networks"

    Elisabeth Rossegger, Grießer, T. & Schlögl, S., 30 Sept 2021.

    Research output: Contribution to conference › Presentation › Research › peer-review

  47. Published

    "Probleme des MCN6000 bei der Messung von geologischen Proben und Mo-reichen Legierungen mit ICPQMS"

    Meisel, T., Prattes, K. & Wegscheider, W., 1998.

    Research output: Contribution to conference › Poster › Research › peer-review

  48. Published

    "Problemstoff" Auto

    Staber, W., 2003, In: Institutszeitschrift des Institutes für Nachhaltige Abfallwirtschaft und Entsorgungstechnik, Montanuniversität Leoben. p. 5-6

    Research output: Contribution to journal › Article › Research › peer-review

  49. Published

    "Problemstoff" Auto

    Staber, W., 2003, In: vju. p. 10-11

    Research output: Contribution to journal › Article › Research › peer-review

  50. Published

    "Quality assurance good practice for research and development and non-routine analysis"

    Holcombe, D. G., Neidhart, B., Radvila, P., Steck, W. & Wegscheider, W., 1999, In: Analytica chimica acta. 393, p. 157-165

    Research output: Contribution to journal › Article › Research › peer-review

  51. Published

    "Rock Physics Template"- Application on different rocks and different scales

    Pupos, J., 2014

    Research output: Thesis › Master's Thesis

  52. Published

    "Simulation of the beam blank casting. A new SEN type for the thin slab casting"

    Vakhrushev, A., 2013

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  53. Published

    "Subbdelloidina" luterbacheri Riegraf, 1987 (Encrusting Foraminifera) from Late Jurassic to Early Cretaceous Reefal Limestones of Albania and the Northern Calcareous Alps (Austria).

    Gawlick, H-J. & Schlagintweit, F., 2006, In: Jahrbuch / Geologische Bundesanstalt. 146, p. 53-63

    Research output: Contribution to journal › Article › Research › peer-review

  54. Published

    "The Application of 1D and 3D Fluid Dynamics Analysis Methods for Intake and

    Brandstätter, W. & Wieser, K., 1998, "The Application of 1D and 3D Fluid Dynamics Analysis Methods for Intake and. p. 0-0

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  55. Published

    "The Numerical approximation of solution to parabolic SPDEs forced by a Lévy noise"

    Simonov, I., 2012.

    Research output: Contribution to conference › Poster › Research › peer-review

  56. Published

    "Umweltauswirkungen der Rohstoffgewinnung", Kapitel: Schall / Lärm

    Mayer, G., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  57. Published

    "Using a Three Phase Mixed Columnar-Equiaxed Solidification Model to Study Macrosegregation in Ingot Casting: Perspectives and Limitations"

    Wu, M., Kharicha, A. & Ludwig, A., 2013, "Using a Three Phase Mixed Columnar-Equiaxed Solidification Model to Study Macrosegregation in Ingot Casting: Perspectives and Limitations". p. 171-180

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  58. Published

    "Variation of the Resistance During the Elektrode Movement in the Electroslag Remelting Process"

    Kharicha, A., Wu, M. & Ludwig, A., 2013, "Variation of the Resistance During the Elektrode Movement in the Electroslag Remelting Process". p. 145-150

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  59. Published

    "bico-TEC" - A New Type of Belt Conveyor with Horizontal Curves

    Kessler, F. & Grabner, K., 2000, In: Bulk solids handling. 1, p. 163-170

    Research output: Contribution to journal › Article › Research › peer-review

  60. Published

    "bico-TEC" - A New Type of Belt Conveyor with Horizontal Curves

    Kessler, F., Grabner, K. & Grimmer, K-J., 1993, In: Bulk solids handling. 13, 4, p. 741-747

    Research output: Contribution to journal › Article › Research › peer-review

  61. Published

    "bico-TEC" - A New Type of Belt Conveyor with Horizontal Curves

    Kessler, F. & Grabner, K., 1994, "bico-TEC" - A New Type of Belt Conveyor with Horizontal Curves. p. 77-83

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  62. Published

    "bico-TEC" - Horizontal Conveyor Belts Travelling in a Curved Direction

    Kessler, F. & Grabner, K., 1995, "bico-TEC" - Horizontal Conveyor Belts Travelling in a Curved Direction. p. 30-48

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  63. Published

    $k$-dominating sets of cardinal products of paths

    Seifter, N. & Klobucar, A., 2000, In: European journal of combinatorics .

    Research output: Contribution to journal › Article › Research › peer-review

  64. Published

    'Electron cooling times in PbTe "quasi" quantum wires and dots'

    Murdin, B. N., Ciesla, C. M., Findlay, P. C., Langerak, CJGM., Pidgeon, C. R., Oswald, J., Springholz, G. & Bauer, G., 1999, In: Semiconductor science and technology. 14, p. 1999-2015

    Research output: Contribution to journal › Article › Research › peer-review

  65. Published

    (Ba,Ca)TiO3 PTCR ceramics with LaNiO3 thin-film electodes: preparation and characterization of the interface

    Trummer, B., Fruhwirth, O., Reichmann, K., Herzog, G., Sitte, W. & Holzinger, M., 2000, In: Journal of electroceramics. 5, p. 53-61

    Research output: Contribution to journal › Article › Research › peer-review

  66. Published

    (Grenzüberschreitenden Verbringung von aufbereiteten Sekundärbrennstoffen aus Gewerbeabfällen

    Lorber, K. & Menapace, H., 2007

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  67. Published

    (Nano)Composite mit hoher Wärmeleitfähigkeit

    Wanner, A. J., Moser, A., Feuchter, M. & Kern, W., 2015.

    Research output: Contribution to conference › Presentation › Research

  68. Published

    (Non-)Distributivity of the Product for σ-Algebras with Respect to the Intersection

    Steinicke, A., Jun 2021, In: Archiv der Mathematik. 116, 6, p. 667-675 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  69. Published

    .: Betriebserfahrungen in der Ersatzbrennstoffproduktion und –verwertung am Beispiel ThermoTeam

    Pomberger, R. & Schmidt, G., 2005, Ersatzbrennstoffe 5 - Herstellung und Verwertung.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  70. Published

    .: Die Entwicklung der privaten Entsorgungswirtschaft in Österreich und im europäischen Umfeld – Der Lange Weg zu einer Hightech Wirtschaft

    Roth, H. & Pomberger, R., 2006, Texte zur Abfallwirtschaft, Band 1.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  71. Published

    .:“Schädigungstolerante Auslegung von Aluminium-Druckgusskomponenten“

    Oberwinkler, C., Leitner, H. & Eichlseder, W., 2010, In: MP materials testing : Materialprüfung . 52, p. 513-519

    Research output: Contribution to journal › Article › Research › peer-review

  72. Published

    1. STELLUNGNAHME ZUR DATENVALIDIERUNG IM ZUGE DER AUFBEREITUNG VON AUSHUBMATERIAL DER BODENWASCHANLAGE „GROUND UNIT“ AM „GATE 11“

    Flachberger, H. & Schwarz, H., 2013

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  73. Published

    1. Zwischenbericht "Innovative Grafite"

    Lämmerer, W. (ed.), 2014, Leoben.

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  74. Published

    1. Zwischenbericht (FFG): Austempered Ductile Iron - Festigkeitssteigerung unter komplexer Betriebsbeanspruchung

    Wohlfahrt, M. & Guster, C., 2010

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  75. Published

    1. Zwischenbericht (FFG): FestOptAlGuss - Entwicklung von Materialmodellen für die festigkeitstechnische Optimierung von hochbelasteten Aluminium-Gusskomponenten

    Guster, C. & Redik, S., 2011

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  76. Published

    1. Zwischenbericht (FFG): Instandhaltung 4.0: Teil WBW

    Bernerstätter, R. & Biedermann, H., Apr 2015

    Research output: Book/Report › Commissioned report › Research

  77. Published

    1. Zwischenbericht (FFG): Smart Maintenance

    Kinz, A. & Biedermann, H., 30 Sept 2015

    Research output: Book/Report › Commissioned report › Research

  78. Published

    1. Zwischenbericht Bridge FFG ARP

    Schnideritsch, H., 2008

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  79. Published

    1. Zwischenbericht Projekt Feuerfestrecycling

    Strubel, S. & Flachberger, H., 2012

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  80. Published

    1. Zwischenbericht zum Projekt: Untersuchungen zur NOx-Bildung im

    Weiß, C., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  81. Published

    1. Zwischenbericht zur Pelletierung von Glasmehl

    Weingrill, G. & Böhm, A., 2014

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  82. Published

    1. Zwischenbericht über Untersuchungen zur Heißrissempfindlichkeit von Walzenwerkstoffen (Thermocalcberechnungen)

    Wieser, G., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  83. Published

    1.Leobener Symposium POLYMER SOLAR MATERIALS am 06. und 7. November 2003 im Congress Leoben

    Wallner, G., 2003, In: VLK-News. p. 11-16

    Research output: Contribution to journal › Article › Research › peer-review

  84. Published

    10 Jahre Industrielogistik an der Montanuniversität Leoben

    Zsifkovits, H., 2013, In: Berg- und hüttenmännische Monatshefte : BHM. 158, p. 308-310

    Research output: Contribution to journal › Article › Research › peer-review

  85. Published

    10. Tagung Gefüge und Bruch

    Panzenböck, M., Danzer, R. & Pohl, M., 2011, Eigenverlag.

    Research output: Book/Report › Anthology › Research

  86. Published

    100 % bio-based high-performance epoxy resin

    Todorovic, A., Blößl, Y. & Resch-Fauster, K., 11 Nov 2020.

    Research output: Contribution to conference › Poster › Research

  87. Published

    100 Jahre Leopold Müller - 40 Jahre ÖGG

    Galler, R. & Schubert, W., 2008, In: Geomechanics and tunnelling. p. 316-316

    Research output: Contribution to journal › Article › Research › peer-review

  88. Published

    100 Jahre Prof. Leopold Müller

    Galler, R., 2008, Berlin: Ernst & Sohn. 140 p.

    Research output: Book/Report › Book › Research

  89. Published

    100 years after Griffith: From brittle bulk fracture to failure in 2D materials

    Kiener, D. & Han, S. M., Aug 2022, In: MRS Bulletin. 47.2022, August, p. 792-799 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  90. Published

    11. Österreichische Chemietage - Wissenschaftliche Beiträge

    Sitte, W. (ed.), 2005, Eigenverlag.

    Research output: Book/Report › Anthology › Research

  91. Published

    11th Austrian Tunnel Day (Editorial)

    Galler, R., 2018, In: Geomechanics and tunnelling = Geomechanik und Tunnelbau. 2018, 6, p. 618 1 p.

    Research output: Contribution to journal › Editorial

  92. Published

    12. Karimi-Sibaki E., Kharicha A., Wu M., Bohacek J., Ludwig A., Steel Res. Int., Vol. 88 (5), 2017, DOI: 10.1002/srin.201770051. “Cover Picture: steel research int. 5/2017”

    Karimi Sibaki, E., Wu, M., Ludwig, A., Bohacek, J. & Kharicha, A., 2017

    Research output: Other contribution › Research

  93. Published

    12. Bericht zum Projekt "Vorhersage und Minimierung des Innenfehlerbereichs beim Block-auf-Block-Strangpressen"

    Hatzenbichler, T., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  94. Published

    12. Leobener Bergmannstag 2012 – EUMICON European Mineral Resource Conference

    Öfner, W., 2013, In: Aufbereitungstechnik : AT. 54, p. 25-30

    Research output: Contribution to journal › Article › Research › peer-review

  95. Published

    12. ÖSTERREICHISCHER TUNNELTAG − Generationenwechsel – ein Rückblick: Neues von der Montanuniversität

    Galler, R., 2021, In: Berg- und hüttenmännische Monatshefte : BHM. 166.2021, 12, p. 638-640 3 p.

    Research output: Contribution to journal › Article › Research

  96. Published

    12th Austrian Tunnel Day - A change of generation: News: Geomechanics and Tunnelling 6/2021 - Conference Report

    Galler, R. & Stipek, W., 2021, In: Geomechanics and tunnelling = Geomechanik und Tunnelbau. 2021, 6, p. 689-692 4 p.

    Research output: Contribution to journal › Article › Research

  97. Published

    12th International Conference on the Mechanical Behavior on of Materials: Thermal Stability of Residual Streses in Ti-6Al-4V components

    Stanojevic, A., Maderbacher, H., Angerer, P. & Oberwinkler, B., 10 May 2015.

    Research output: Contribution to conference › Abstract

  98. Published

    13. Bericht zum Projekt "Vorhersage und Minimierung des Innenfehlerbereichs beim Block-auf-Block-Strangpressen"

    Hatzenbichler, T., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  99. Published

    14C-Methode - Bestimmung des biogenen Anteils in Abfällen

    Kienzl, N., Staber, W. & Raber, G., 2006, Abfall- und Deponietechnik, Abfallwirtschaft, Altlasten. Verl. Glückauf, p. 349-352

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  100. Published

    14C-Methode auf dem Weg zum Stand der Technik

    Staber, W., 2007, In: vju. p. 10-12

    Research output: Contribution to journal › Article › Research › peer-review

Previous 1 2 3 4 5 6 7 8 ...328 Next

Advanced filters

All authors

Reset

to