High-speed nanoindentation mapping of organic matter-rich rocks: A critical evaluation by correlative imaging and machine learning data analysis

Research output: Contribution to journalArticleResearchpeer-review

Standard

Bibtex - Download

@article{436cb47b401d467e9841d8896d7d8537,
title = "High-speed nanoindentation mapping of organic matter-rich rocks: A critical evaluation by correlative imaging and machine learning data analysis",
abstract = "Nanoindentation is a valuable tool, which enables insights into the material properties of natural, highly inhomogeneous composite materials such as shales and organic matter-rich rocks. However, the inherent complexity of these rocks and its constituents complicates the extraction of representative material parameters such as the reduced elastic modulus (E r) and hardness (H) for organic matter (OM) via nanoindentation. The present study aims to extract the representative H and E r values for OM within an over-mature sample set (1.33–2.23%Rr) from the Chinese Songliao Basin and evaluate influencing factors of the resulting parameters. This was realized by means of high-speed nanoindentation mapping in combination with comprehensive optical and high resolution-imaging methods. The average E r and H values for the different particles range from 3.86 ± 0.17 to 7.52 ± 3.80 GPa and from 0.36 ± 0.02 to 0.64 ± 0.09 GPa, respectively. The results were subsequently processed by the unsupervised machine learning algorithm k-means clustering in order to evaluate representative E r and H results. The post-processing suggests that inherent heterogeneity of OM is responsible for considerable data scattering. In fact, surrounding, underlying and inherent mineral matter lead to confinement effects and enhanced E r values, whereas cracks and pores are responsible for a lowered stiffness. Adjusted for these influencing factors, a declining trend with increasing maturity (up to 1.96%Rr) could be observed for E r, with average values calculated from representative clusters ranging from 5.88 ± 0.37 down to 4.07 ± 0.32 GPa. E r slightly increases again between 2.00 and 2.23%Rr (up to 4.85 ± 0.35 GPa). No clear relationship of H with thermal maturity was observed. The enhanced accuracy archived by a large data set facilitated machine learning approach not only improves further modelling attempts but also allows insights of impacting geological processes on the material parameter and general understanding of mechanical behavior of OM in rock formations. Thus, the presented multimethod approach promotes a fast and reliable assessment of representative material parameters from organic rock constituents. ",
author = "Sanja Vranjes-Wessely and David Misch and Daniel Kiener and Cordill, {Megan J.} and Natalie Frese and Andr{\'e} Beyer and Brian Horsfield and Chengshan Wang and Sachsenhofer, {Reinhard F.}",
note = "Publisher Copyright: {\textcopyright} 2021 The Author(s)",
year = "2021",
month = nov,
day = "1",
doi = "10.1016/j.coal.2021.103847",
language = "English",
volume = "247.2021",
journal = "International journal of coal geology",
issn = "0166-5162",
publisher = "Elsevier",
number = "1 November",

}

RIS (suitable for import to EndNote) - Download

TY - JOUR

T1 - High-speed nanoindentation mapping of organic matter-rich rocks: A critical evaluation by correlative imaging and machine learning data analysis

AU - Vranjes-Wessely, Sanja

AU - Misch, David

AU - Kiener, Daniel

AU - Cordill, Megan J.

AU - Frese, Natalie

AU - Beyer, André

AU - Horsfield, Brian

AU - Wang, Chengshan

AU - Sachsenhofer, Reinhard F.

N1 - Publisher Copyright: © 2021 The Author(s)

PY - 2021/11/1

Y1 - 2021/11/1

N2 - Nanoindentation is a valuable tool, which enables insights into the material properties of natural, highly inhomogeneous composite materials such as shales and organic matter-rich rocks. However, the inherent complexity of these rocks and its constituents complicates the extraction of representative material parameters such as the reduced elastic modulus (E r) and hardness (H) for organic matter (OM) via nanoindentation. The present study aims to extract the representative H and E r values for OM within an over-mature sample set (1.33–2.23%Rr) from the Chinese Songliao Basin and evaluate influencing factors of the resulting parameters. This was realized by means of high-speed nanoindentation mapping in combination with comprehensive optical and high resolution-imaging methods. The average E r and H values for the different particles range from 3.86 ± 0.17 to 7.52 ± 3.80 GPa and from 0.36 ± 0.02 to 0.64 ± 0.09 GPa, respectively. The results were subsequently processed by the unsupervised machine learning algorithm k-means clustering in order to evaluate representative E r and H results. The post-processing suggests that inherent heterogeneity of OM is responsible for considerable data scattering. In fact, surrounding, underlying and inherent mineral matter lead to confinement effects and enhanced E r values, whereas cracks and pores are responsible for a lowered stiffness. Adjusted for these influencing factors, a declining trend with increasing maturity (up to 1.96%Rr) could be observed for E r, with average values calculated from representative clusters ranging from 5.88 ± 0.37 down to 4.07 ± 0.32 GPa. E r slightly increases again between 2.00 and 2.23%Rr (up to 4.85 ± 0.35 GPa). No clear relationship of H with thermal maturity was observed. The enhanced accuracy archived by a large data set facilitated machine learning approach not only improves further modelling attempts but also allows insights of impacting geological processes on the material parameter and general understanding of mechanical behavior of OM in rock formations. Thus, the presented multimethod approach promotes a fast and reliable assessment of representative material parameters from organic rock constituents.

AB - Nanoindentation is a valuable tool, which enables insights into the material properties of natural, highly inhomogeneous composite materials such as shales and organic matter-rich rocks. However, the inherent complexity of these rocks and its constituents complicates the extraction of representative material parameters such as the reduced elastic modulus (E r) and hardness (H) for organic matter (OM) via nanoindentation. The present study aims to extract the representative H and E r values for OM within an over-mature sample set (1.33–2.23%Rr) from the Chinese Songliao Basin and evaluate influencing factors of the resulting parameters. This was realized by means of high-speed nanoindentation mapping in combination with comprehensive optical and high resolution-imaging methods. The average E r and H values for the different particles range from 3.86 ± 0.17 to 7.52 ± 3.80 GPa and from 0.36 ± 0.02 to 0.64 ± 0.09 GPa, respectively. The results were subsequently processed by the unsupervised machine learning algorithm k-means clustering in order to evaluate representative E r and H results. The post-processing suggests that inherent heterogeneity of OM is responsible for considerable data scattering. In fact, surrounding, underlying and inherent mineral matter lead to confinement effects and enhanced E r values, whereas cracks and pores are responsible for a lowered stiffness. Adjusted for these influencing factors, a declining trend with increasing maturity (up to 1.96%Rr) could be observed for E r, with average values calculated from representative clusters ranging from 5.88 ± 0.37 down to 4.07 ± 0.32 GPa. E r slightly increases again between 2.00 and 2.23%Rr (up to 4.85 ± 0.35 GPa). No clear relationship of H with thermal maturity was observed. The enhanced accuracy archived by a large data set facilitated machine learning approach not only improves further modelling attempts but also allows insights of impacting geological processes on the material parameter and general understanding of mechanical behavior of OM in rock formations. Thus, the presented multimethod approach promotes a fast and reliable assessment of representative material parameters from organic rock constituents.

UR - http://www.scopus.com/inward/record.url?scp=85115036317&partnerID=8YFLogxK

U2 - 10.1016/j.coal.2021.103847

DO - 10.1016/j.coal.2021.103847

M3 - Article

VL - 247.2021

JO - International journal of coal geology

JF - International journal of coal geology

SN - 0166-5162

IS - 1 November

M1 - 103847

ER -