A Comparative Analysis of Efficiency and Losses in a 5 kW Hybrid and Full-SiC Converter, for PV Applications in Austria
Research output: Contribution to journal › Article › Research › peer-review
Standard
In: Energies, Vol. 17.2024, No. 22, 5600, 09.11.2024.
Research output: Contribution to journal › Article › Research › peer-review
Harvard
APA
Vancouver
Author
Bibtex - Download
}
RIS (suitable for import to EndNote) - Download
TY - JOUR
T1 - A Comparative Analysis of Efficiency and Losses in a 5 kW Hybrid and Full-SiC Converter, for PV Applications in Austria
AU - Chakraborty, Rupak
AU - Eskilson, Troy
AU - Biswas, Sumanta
AU - Makoschitz, Markus
PY - 2024/11/9
Y1 - 2024/11/9
N2 - Wide Bandgap (WBG) devices like SiC-MOSFETs have become quite popular in recent times due to their superior switching characteristics, high current carrying capability and temperature stability. They are being adopted for many different applications and for a wide range of power levels. For the case of PV applications, manufacturers are considering moving to SiC-based topologies due to higher converter efficiencies and improved power density. However, the present industry largely uses hybrid approaches (IGBT + SiC-diode) to optimize system cost. The aim of this paper is to present a fair comparison of an industry-grade hybrid converter with another similar counterpart where only the Si device has been replaced with the SiC device. The effects of such a direct replacement on the efficiency and losses of the converter are studied under various power ratings. Both converters consist of two stages—a boost converter and a three-phase three-level DC to AC converter. Simulation and experimental results comprehensively indicate a higher efficiency (improvements of up to 8 percent points) for the full-SiC converter, and this is more prominent at low input voltages, where the boost converter is active. However, the gains in efficiency are moderate for high input voltages (1 percent point at nominal voltage), where the boost converter is bypassed, and the losses are almost entirely attributed to the inverter. When set in the backdrop of the Austrian inverter market, the use of SiC devices in PV inverters has the potential for an estimated savings of 37.5 GWh/year in terms of loss reduction.
AB - Wide Bandgap (WBG) devices like SiC-MOSFETs have become quite popular in recent times due to their superior switching characteristics, high current carrying capability and temperature stability. They are being adopted for many different applications and for a wide range of power levels. For the case of PV applications, manufacturers are considering moving to SiC-based topologies due to higher converter efficiencies and improved power density. However, the present industry largely uses hybrid approaches (IGBT + SiC-diode) to optimize system cost. The aim of this paper is to present a fair comparison of an industry-grade hybrid converter with another similar counterpart where only the Si device has been replaced with the SiC device. The effects of such a direct replacement on the efficiency and losses of the converter are studied under various power ratings. Both converters consist of two stages—a boost converter and a three-phase three-level DC to AC converter. Simulation and experimental results comprehensively indicate a higher efficiency (improvements of up to 8 percent points) for the full-SiC converter, and this is more prominent at low input voltages, where the boost converter is active. However, the gains in efficiency are moderate for high input voltages (1 percent point at nominal voltage), where the boost converter is bypassed, and the losses are almost entirely attributed to the inverter. When set in the backdrop of the Austrian inverter market, the use of SiC devices in PV inverters has the potential for an estimated savings of 37.5 GWh/year in terms of loss reduction.
U2 - 10.3390/en17225600
DO - 10.3390/en17225600
M3 - Article
VL - 17.2024
JO - Energies
JF - Energies
SN - 1996-1073
IS - 22
M1 - 5600
ER -