Wilfried Eichlseder

51 - 100 out of 287Page size: 50

Research output

  1. 2011
  2. Published

    Load-carrying Capacity Prediction of Different Plasma Nitrided and Case hardened Specimens under Rolling Contact Loading

    Trausmuth, A., Lengauer, M., Godor, I., Stoschka, M., Dietrich, A. & Eichlseder, W., 2011, Quality in Heat Treatment. p. 143-153

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  3. Published

    Load-carrying Capacity Prediction of Different Plasma Nitrided, Case hardened and Quenched Specimens under Rolling Contact Loading

    Trausmuth, A., Godor, I., Stoschka, M., Dietrich, A. & Eichlseder, W., 2011, Tribosystems Reliability and Lifetime Assessment. p. 441-447

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  4. Published

    Makrolunker in Gusseisen mit Kugelgraphit: Vorhersage durch Simulation und deren Einfluss auf die Schwingfestigkeit

    Kainzinger, P., Wohlfahrt, M. & Eichlseder, W., 2011, In: Gießerei-Rundschau. p. 106-110

    Research output: Contribution to journal › Article › Research › peer-review

  5. Published

    Material and component investigations on a Ti-6-4 fitting element

    Tan, W., Stoschka, M., Riedler, M., Eichlseder, W., Romagnoli, F. & Rondon, V., 2011, In: Mécanique & industries = Mechanics & industry. 12, 5, p. 361-378

    Research output: Contribution to journal › Article › Research › peer-review

  6. Published

    Multiscale Fatigue Crack Observations on Ti-6Al-4V

    Oberwinkler, B., Lettner, A. & Eichlseder, W., 2011, In: International Journal of Fatigue. 33, p. 710-718

    Research output: Contribution to journal › Article › Research › peer-review

  7. Published

    Neuer Ansatz zur Bewertung von Stützwirkung und statistischem Größeneinfluss im Auslegungsprozess

    Fröschl, J., Matthias, D. & Eichlseder, W., 2011, In: Materialprüfung. 53, 7-8, p. 481-486

    Research output: Contribution to journal › Article › Research › peer-review

  8. Published

    Shrinkage in Ductile Iron: Prediction from Simulation and Effects on Fatigue Behaviour

    Kainzinger, P., Wohlfahrt, M. & Eichlseder, W., 2011.

    Research output: Contribution to conference › Poster › Research › peer-review

  9. Published

    The fatigue endurance limit of a high strength CrNi- steel in a fretting dominated regime

    Christiner, T., Reiser, J., Godor, I., Eichlseder, W., Trieb, F. & Stühlinger, R., 2011, 38th LEEDS-LYON SYMPOSIUM ON TRIBOLOGY. p. 1-1

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  10. Published

    The influence of an improved adjustment of the material model on the fatigue lifetime results on Ti-6-4 air craft components

    Tan, W., Maderbacher, H., Stoschka, M., Riedler, M. & Eichlseder, W., 2011, 1st Interquadrennial ICF Conference in Middle East and Africa. p. 587-596

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  11. Published

    The influence of welding process parameters on residual stresses by means of coupled thermo-mechanical simulation

    Stoschka, M., Fössl, T., Leitner, H. & Eichlseder, W., 2011, In: International journal of microstructure and materials properties (IJMMP). 6, p. 105-121

    Research output: Contribution to journal › Article › Research › peer-review

  12. Published

    TMF Lifetime Calculation Methods and their Limitations of Usability

    Köberl, H., Winter, G. & Eichlseder, W., 2011.

    Research output: Contribution to conference › Poster › Research › peer-review

  13. Published

    Tribological performance of thin overlays for journal bearings

    Grün, F., Godor, I., Gärtner, W. & Eichlseder, W., 2011, In: Tribology International. 44, p. 1271-1280

    Research output: Contribution to journal › Article › Research › peer-review

  14. 2010
  15. Published

    PROBENANALYSESYSTEM

    Froeschl, J. (Inventor) & Eichlseder, W. (Inventor), 2 Jun 2010, IPC No. G01N 3/ 32 A I, Patent No. EP2191251, Priority date 29 Aug 2008, Priority No. WO2008EP07094

    Research output: Patent

  16. Published

    Galvanic corrosion and stress corrosion cracking of steel and aluminum bolts in magnesium die cast alloy AZ91

    Gerstmayr, G., Mori, G. & Eichlseder, W., 21 May 2010, Magnesium Technology 2010 - Held During TMS 2010 Annual Meeting and Exhibition. p. 145-150 6 p. (Magnesium Technology).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  17. Published

    SAMPLE ANALYSIS SYSTEM

    Froeschl, J. (Inventor) & Eichlseder, W. (Inventor), 6 May 2010, IPC No. G01N 3/ 00 A I, Patent No. WO2010049175, Priority date 31 Oct 2008, Priority No. EP20080019114

    Research output: Patent

  18. Published

    A Model Scale Test Method for the Piston Ring - Cylinder Liner Tribosystem of Internal Combustion Engines

    Schiffer, J., Godor, I., Grün, F. & Eichlseder, W., 2010, In: The archive of mechanical engineering : quarterly (Archiwum budowy maszyn). 57, p. 331-341

    Research output: Contribution to journal › Article › Research › peer-review

  19. Published

    A new lifetime calculation method based on variation of the microstructure due to different manufacturing conditions of Ti-6Al-4V

    Tan, W., Stoschka, M., Riedler, M. & Eichlseder, W., 2010, 18th European Conference on Fracture Fracture of Materials and Structures from Micro to Macro Scale. p. 0-1

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  20. Published

    An integrated approach to relate hot forging process controlled microstructure of IN718 aerospace components to fatigue life

    Stoschka, M., Riedler, M., Stockinger, M., Maderbacher, H. & Eichlseder, W., 2010, 7th International Symposium on SUPERALLOY718 and DERIVATIVES. p. 751-765

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  21. Published

    Application of fatigue approaches on fillet welds of high strength steel

    Stoschka, M., Leitner, M., Fössl, T., Leitner, H. & Eichlseder, W., 2010, In: Materialwissenschaft und Werkstofftechnik. 41, p. 961-971

    Research output: Contribution to journal › Article › Research › peer-review

  22. Published

    Bewertung des tribologischen Verhaltens von unterschiedlich modifizierten Grauguss-Zylinderlaufbahnen auf Modellmaßstab

    Schiffer, J., Godor, I., Grün, F., Eichlseder, W., Dibiasi, W. & Strobl, V., 2010, Zylinderlaufbahn, Kolben, Pleuel - Innovative Systeme im vergleich; VDI-Berichte 2109. p. 297-300

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  23. Published

    Bewertung des tribologischen Verhaltens von unterschiedlich modifizierten Grauguß-Zylinderlaufbuchsen auf Modellmaßstab

    Schiffer, J., Godor, I., Grün, F., Eichlseder, W., Dibiasi, W. & Strobl, V., 2010.

    Research output: Contribution to conference › Poster › Research › peer-review

  24. Published

    Characterization of weld toe design by arc welding process parameters

    Fössl, T., Stoschka, M., Eichlseder, W. & Posch, G., 2010,

    63th IIW Annual Assembly & International Conference

    .     p. 126-132

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  25. Published

    Combined numerical and experimental investigations on Fretting wear

    Christiner, T., Reiser, J., Godor, I., Maderbacher, H., Eichlseder, W., Trieb, F. & Stühlinger, R., 2010, In: Procedia Engineering. 2, p. 1173-1179

    Research output: Contribution to journal › Article › Research › peer-review

  26. Published

    Combined numerical and experimental investigations on Fretting Wear

    Christiner, T., Reiser, J., Maderbacher, H., Godor, I., Eichlseder, W., Trieb, F. & Stühlinger, R., 2010, Fatigue 2010 Book of Abstracts. p. 225-225

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  27. Published

    ENHANCED FATIGUE ANALYSIS – INCORPORATING DOWNSTREAM MANUFACTURING PROCESSES

    Eichlseder, W., 2010, In: Materiali in tehnologije = Materials and technology. 44, 4, p. 185-192

    Research output: Contribution to journal › Article › Research › peer-review

  28. Published

    Evaluation of fillet weld properties in dependence of weld manufacturing parameters

    Fössl, T., Leitner, M. & Eichlseder, W., 2010, 27th Danubia-Adria Symposium. p. 78-79

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  29. Published

    Fatigue investigations on a forged "W-Link" to improve the transferability of specimen results to real components

    Tan, W., Stoschka, M., Riedler, M. & Eichlseder, W., 2010, In: FATIGUE 2010. 2, 1, p. 2277-2285

    Research output: Contribution to journal › Article › Research › peer-review

  30. Published

    „Fertigungsbedingte Einflüsse auf die Schwingfestigkeit von Al- Gussbauteilen“

    Eichlseder, W., Powazka, D. & Leitner, H., 2010, In: Giesserei. 07, p. 32-39

    Research output: Contribution to journal › Article › Research › peer-review

  31. Published

    Galvanic corrosion and stress corrosion cracking of steel and aluminium bolts in magnesium die cast alloy AZ91

    Gerstmayr, G., Mori, G. & Eichlseder, W., 2010, Magnesium Technology 2010. p. 145-150

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  32. Published

    Importance of local microstructure for damage tolerant light weight design of Ti-6Al-4V forgings

    Oberwinkler, B., Riedler, M. & Eichlseder, W., 2010, In: International Journal of Fatigue. 32, p. 808-814

    Research output: Contribution to journal › Article › Research › peer-review

  33. Published

    Importance of Residual Stresses and Surface Roughness Regarding Fatigue of Titanium Forgings

    Oberwinkler, B., Riedler, M. & Eichlseder, W., 2010, In: Journal of ASTM international. 7

    Research output: Contribution to journal › Article › Research › peer-review

  34. Published

    Influence of Local Microstructure on the Fatigue Behaviour of a Titanium Base Alloy

    Eichlseder, W. & Oberwinkler, B., 2010, Konferenz Multiscale effects in fatigue of metals, Euromech 505,.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  35. Published

    Influences of pores and segregations in cast and forgend components on the fatigue life

    Eichlseder, W., Oberwinkler, C. & Fröschl, J., 2010, 29emes Journees de Printemps "Influence des procedes sur la tenue en fatigue - Role des defauts - JP 2010. p. 71-78

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  36. Published

    Investigation of operating ranges for lubricated large-area contacts using ring-on-disc test configuration

    Grün, F., Godor, I., Gärtner, W. & Eichlseder, W., 2010, 14th Nordic Symposium on Tribology - Abstracts. p. 70-70

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  37. Published

    Investigations to improve the transferability of specimen results by real component

    Tan, W., Stoschka, M., Maderbacher, H., Riedler, M., Eichlseder, W. & Romagnoli, F., 2010, In: Materials engineering. 17, 3, p. 1-8

    Research output: Contribution to journal › Article › Research › peer-review

  38. Published

    Investigations to improve the transferability of specimen results by the new component specimen "W-Link"

    Tan, W., Stoschka, M., Riedler, M. & Eichlseder, W., 2010, 27th Danubia-Adria Symbosium on Experimental Methods in Solid Mechanics. p. 0-1

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  39. Published

    Life fatigue prediction of different plasma nitrided and case hardened specimens under rolling contact loading

    Trausmuth, A., Godor, I., Stoschka, M., Haberer, C., Eichlseder, W. & Dietrich, A., 2010, Nitrieren und Nitrocarburieren. p. 140-149

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  40. Published

    Lifetime evaluation of hot forged aerospace components by linking microstructural evolution and fatigue behaviour

    Maderbacher, H., Christiner, T., Gänser, H.-P., Riedler, M., Stoschka, M. & Eichlseder, W., 2010, In: Procedia Engineering. 2, p. 2269-2276

    Research output: Contribution to journal › Article › Research › peer-review

  41. Published

    Liftime Calculation of thermo-Mechanically Loaded Materials (Al, Cu, Ni, and Fe Alloys) Based un Empirical Methods

    Köberl, H., Winter, G. & Eichlseder, W., 2010, In: Journal of ASTM international. Vol. 8, p. 1-11

    Research output: Contribution to journal › Article › Research › peer-review

  42. Published

    Numerical approach to fretting wear

    Christiner, T., Reiser, J., Godor, I., Eichlseder, W., Trieb, F. & Stühlinger, R., 2010, Water Jetting. p. 269-273

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  43. Published

    NUMERISCHER UND EXPERIMENTELLER ANSATZ ZUR FRETTINGBEWERTUNG: MATERIALABTRAG UND ERMÜDUNG

    Christiner, T., Reiser, J., Godor, I., Eichlseder, W., Trieb, F. & Stühlinger, R., 2010, Reibung, Schmierung und Verschleiß. p. 50/1-50/11

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  44. Published

    On the applicability of high strengh self-tapping aluminium bolts in magnesium nut materials for automotive applications

    Gerstmayr, G., Mori, G., Leitner, H. & Eichlseder, W., 2010, In: Materials and Corrosion. 61, p. 379-387

    Research output: Contribution to journal › Article › Research › peer-review

  45. Published

    Rolling contact fatigue prediction of different plasma nitrided and case hardened specimens

    Eichlseder, W., Trausmuth, A., Godor, I. & Stoschka, M., 2010, Mechanical Engineering. p. 24-26

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  46. Published

    Schädigungsäquivalente Prüfmethodik für das Tribosystem Kolbenring-Zylinderlaufbahn von Großmotoren

    Schiffer, J., Godor, I., Grün, F. & Eichlseder, W., 2010, In: Tribologie und Schmierungstechnik. 57, p. 37-42

    Research output: Contribution to journal › Article › Research › peer-review

  47. Published

    .:“Schädigungstolerante Auslegung von Aluminium-Druckgusskomponenten“

    Oberwinkler, C., Leitner, H. & Eichlseder, W., 2010, In: MP materials testing : Materialprüfung . 52, p. 513-519

    Research output: Contribution to journal › Article › Research › peer-review

  48. Published

    The role of sampling position on fatigue of austempered ductile iron

    Wohlfahrt, M., Oberwinkler, C., Tunzini, S., Rauscher, A., de la Prida Caballero, R. & Eichlseder, W., 2010, In: Procedia Engineering. 2, p. 1337-1341

    Research output: Contribution to journal › Article › Research › peer-review

  49. Published

    TRAGFÄHIGKEITSUNTERSUCHUNGEN VON UNTERSCHIEDLICH GEHÄRTETEN WERKSTOFFE UNTER KONTAKTBEANSPRUCHUNG

    Trausmuth, A., Godor, I., Stoschka, M., Eichlseder, W. & Dietrich, A., 2010, Wettbewerbsvorsprung durch tribologische Innovation. p. 57-71

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  50. 2009
  51. Published

    SAMPLE ANALYSIS SYSTEM

    Froeschl, J. (Inventor) & Eichlseder, W. (Inventor), 5 Mar 2009, Patent No. WO2009027097, Priority date 31 Aug 2007, Priority No. EP20070017095

    Research output: Patent

  52. Published

    Link from the microstructure to the fatigue lifteime of forged inconel 718 components

    Maderbacher, H., Gänser, H. P., Riedler, M., Stoschka, M. & Eichlseder, W., 1 Jan 2009, 26th Danubia-Adria Symposium on Advances in Experimental Mechanics. p. 59-60 2 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  53. Published

    Anwendung einer Prüfmethodik zur tribologischen Untersuchung des Systems Kolbenring-Zylinderlaufbahn von Großmotoren

    Schiffer, J., Godor, I., Grün, F., Krampl, H., Eichlseder, W., Dibiasi, W. & Strobl, V., 2009, Tribologie Fachtagung 2009: Reibung, Schmierung und Verschleiß - Forschung und praktische Anwendungen. p. 1-12

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

Previous 1 2 3 4 5 6 Next
View graph of relations

Contact

Phone: 1400

Latest Research Output

View more (287)