Thomas Antretter

201 - 236 out of 236Page size: 50

Research output

  1. 2009
  2. Published

    Macro Modelling and Homogenization for Transformation Induced Plasticity of a Low-Alloy Steel

    Mahnken, R., Schneidt, A. & Antretter, T., 2009, In: International journal of plasticity. 25, p. 183-204

    Research output: Contribution to journal › Article › Research › peer-review

  3. Published

    Phase Transformations of Nano-Crystalline Martensitic Materials

    Waitz, T., Tsuchiya, K., Antretter, T. & Fischer, F. D., 2009, In: MRS Bulletin. 34, p. 814-821

    Research output: Contribution to journal › Article › Research › peer-review

  4. 2008
  5. Published

    Bestimmung der lokalen Verformung in Polykristallinen Werkstoffen

    Rehrl, C., Kleber, S., Antretter, T. & Pippan, R., 2008, Bestimmung der lokalen Verformung in Polykristallinen Werkstoffen. Lehrstuhl für Umformtechnik. Bruno Buchmayr, p. 13-25

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  6. Published

    Competing Accommodation Mechanisms of the Martensite in Nanocrystalline NiTi Shape Memory Alloys

    Waitz, T., Pranger, W., Antretter, T., Fischer, F. D. & Karnthaler, H.-P., 2008, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 481-482, p. 479-483

    Research output: Contribution to journal › Article › Research › peer-review

  7. Published

    Fracture of austenitic steel subject to a wide range of stress triaxiality ratios and crack deformation modes

    Trattnig, G., Antretter, T. & Pippan, R., 2008, In: Engineering Fracture Mechanics. 75, p. 223-235

    Research output: Contribution to journal › Article › Research › peer-review

  8. Published

    Macro Modeling and Homogenization for Identification of Material Parameters to Simulate Phase Transformations

    Mahnken, R., Schneidt, A. & Antretter, T., 2008, Macro Modeling and Homogenization for Identification of Material Parameters to Simulate Phase Transformations. Civil-Comp Press, p. 1-13

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  9. Published

    Measurment of All Six Components of X-Ray Elastic Factors

    Ortner, B., Antretter, T., Hofmann, M. & Werner, E., 2008, In: Materials Science Forum . 571-572, p. 225-229

    Research output: Contribution to journal › Article › Research › peer-review

  10. Published

    Mechanics of Sheared Bands – Applications to Faults, Twins and Variants

    Fischer, F. D., Antretter, T. & Oberaigner, E., 2008, In: Mechanics of materials. 40, p. 195-205

    Research output: Contribution to journal › Article › Research › peer-review

  11. Published

    Numerical Investigation of Thermal Cracks in Pressure Die Casting Tools

    Leindl, M., Ecker, W., Antretter, T. & Ebner, R., 2008.

    Research output: Contribution to conference › Poster › Research › peer-review

  12. Published

    Numerische und experimentelle Untersuchung von Temperaturwechselrissnetzwerken

    Leindl, M., Ecker, W., Ebner, R. & Antretter, T., 2008, Numerische und experimentelle Untersuchung von Temperaturwechselrissnetzwerken. p. 157-174

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  13. Published

    Size Effects on Martensitic Phase Transformations in Nanocrystalline NiTi Shape Memory Alloys

    Waitz, T., Antretter, T., Fischer, F. D. & Karnthaler, H.-P., 2008, In: Materials science and technology. 24, p. 934-940

    Research output: Contribution to journal › Article › Research › peer-review

  14. 2007
  15. Published

    Calibration and validation of an elasto-viscoplastic material model for a hot work tool steel used in pressure casting dies

    Ecker, W., Antretter, T. & Ebner, R., 2007, Key engineering materials. Vol. 345-346. p. 685-688 (Key engineering materials).

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  16. Published

    Finite Element Simulation of the Effect of surface roughness on nanoindentation of thin films with spherical indenters

    Walter, C., Antretter, T., Daniel, R. & Mitterer, C., 2007, In: Surface & coatings technology. 202, p. 1103-1107

    Research output: Contribution to journal › Article › Research › peer-review

  17. Published

    Size Effects on the Martensitic Martensitic Phase Transformation of NiTi Nanograins

    Waitz, T., Antretter, T., Fischer, F. D., Simha, N. K. & Karnthaler, H.-P., 2007, In: Journal of the mechanics and physics of solids. 55, p. 419-444

    Research output: Contribution to journal › Article › Research › peer-review

  18. Published

    The Morphology of Martensite in Nano-Structured NI-TI Alloys

    Antretter, T., Waitz, T. & Fischer, F. D., 2007, Proceedings of the 1st Seminar on The Mechanics of Multifunctional Materials. p. 1-4

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  19. 2006
  20. Published

    On the Algorithmic Implementation of a Material Model Accounting for the Effects of Martensitic Transformation

    Antretter, T., Fischer, F. D., Cailletaud, G. & Ortner, B., 2006, In: Steel research international. 77, p. 733-740

    Research output: Contribution to journal › Article › Research › peer-review

  21. Published

    The cyclic behavior of a hot work tool steel used in pressure casting dies

    Ecker, W., Antretter, T., Ebner, R., Kaschnitz, E., Marsoner, S., Leindl, M. & Köberl, H., 2006, 1. Tagungsband der Leobener Betriebsfestigkeitstage. Montanuniversität Leoben, Lehrstuhl für Allgemeinen Maschinenbau, p. 221-234

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  22. 2005
  23. Published

    Martensitic phase transformations of bulk nanocrystalline NiTi alloys

    Waitz, T., Karnthaler, H. P., Antretter, T. & Fischer, F. D., 1 Dec 2005, Proceedings of an International Conference on Solid-Solid Phase Transformations in Inorganic Materials 2005. Howe, J. M., Laughlin, D. E., Lee, J. K., Dahmen, U. & Soffa, W. A. (eds.). Vol. 2. p. 885-898 14 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  24. 2004
  25. Published

    A numerical model for Transformation Induced Plasticity (TRIP)

    Antretter, T., Fischer, F. D. & Cailletaud, G., 1 Dec 2004, In: Journal de physique / 4. 115, p. 233-241 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  26. 2003
  27. Published

    Effect of back stress evolution due to martensitic transformation on iso-volume fraction lines in a Cr-Ni-Mo-Al-Ti maraging steel

    Tanaka, K., Terasaki, T., Goto, S., Antretter, T., Fischer, F. D. & Cailletaud, G., 20 Jan 2003, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 341, 1-2, p. 189-196 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  28. Published

    Experimental and numerical investigations of the mechanics of martensitic transformation

    Antretter, T., 2003

    Research output: Thesis › Habilitation thesis › peer-review

  29. Published

    Optimized Shape Memory Dampers Modelling and Application

    Oberaigner, E., Antretter, T., Fischer, F. D. & Tanaka, K., 2003, Proceedings of the Third World Conference on Structural Control. p. 561-582

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  30. 2002
  31. Published

    Back stress evolution and iso-volume fraction lines in a Cr-Ni-Mo-Al-Ti maraging steel in the process of martensitic transformation

    Nagayama, K., Terasaki, T., Goto, S., Tanaka, K., Antretter, T., Fischer, F. D., Cailletaud, G. & Azzouz, F., 25 Oct 2002, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 336, 1-2, p. 30-38 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  32. Published

    Theory, experiments and numerical modelling of phase transformations with emphasis on TRIP

    Antretter, T., Fischer, F. D., Tanaka, K. & Cailletaud, G., 1 Jun 2002, In: Steel research international. 73, 6-7, p. 225-235 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  33. Published

    Diffusional Phase Transformation and Deformation in Steels

    Gamsjäger, E., Antretter, T., Schmaranzer, C., Preis, W., Chimani, C. M., Simha, N. K., Svoboda, J. & Fischer, F. D., 2002, In: Computational materials science. 50, p. 92-99

    Research output: Contribution to journal › Article › Research › peer-review

  34. Published

    Simulation of the Damping of a Shape Memory Alloy Rod by using the Likhachev Model

    Pushtshaenko, O., Oberaigner, E., Antretter, T., Fischer, F. D. & Tanaka, K., 2002, In: Journal of intelligent material systems and structures. 13, p. 817-823

    Research output: Contribution to journal › Article › Research › peer-review

  35. Published

    The Thermo-mechanical Response to a General Loading Path of a Martensitically Transforming Steel

    Antretter, T., Fischer, F. D., Lube, T., Tanaka, K. & Cailletaud, G., 2002, In: Journal of intelligent material systems and structures. 13, 12, p. 881-815

    Research output: Contribution to journal › Article › Research › peer-review

  36. 2001
  37. Published

    Mechanical properties of a Cr-Ni-Mo-Al-Ti maraging steel in the process of martensitic transformation

    Nagayama, K., Terasaki, T., Tanaka, K., Fischer, F. D., Antretter, T., Cailletaud, G. & Azzouz, F., 30 Jun 2001, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 308, 1-2, p. 25-37 13 p.

    Research output: Contribution to journal › Article › Research › peer-review

  38. Published

    Susceptibility to failure of the constituents of particulate two-phase composites

    Antretter, T. & Fischer, F. D., 1 Jan 2001, In: International Journal of Damage Mechanics. 10, 1, p. 56-72 17 p.

    Research output: Contribution to journal › Article › Research › peer-review

  39. 2000
  40. Published

    Deformation behavior of elastic-plastic materials containing instantly transforming inclusions

    Antretter, T. & Fischer, F. D., 1 Dec 2000, Key engineering materials. Vol. 177-180 II. p. 431-436 6 p. (Key engineering materials).

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  41. Published

    The role of backstress in phase transforming steels

    Fischer, F. D., Antretter, T., Azzouz, F., Cailletaud, G., Pineau, A., Tanaka, K. & Nagayama, K., 1 Dec 2000, In: Archives of Mechanics. 52, 4-5, p. 569-588 20 p.

    Research output: Contribution to journal › Article › Research › peer-review

  42. Published

    New view on transformation induced plasticity (TRIP)

    Fischer, F. D., Reisner, G., Werner, E., Tanaka, K., Cailletaud, G. & Antretter, T., 1 Jun 2000, In: International journal of plasticity. 16, 7, p. 723-748 26 p.

    Research output: Contribution to journal › Article › Research › peer-review

  43. 1998
  44. Published

    Failure mechanisms of particulate two-phase composites

    Antretter, T. & Fischer, F. D., 1 Dec 1998, In: Materials Research Society symposium proceedings. 529, p. 151-156 6 p.

    Research output: Contribution to journal › Article › Research › peer-review

  45. Published

    Particle cleavage and ductile crack growth in a two-phase composite on a microscale

    Antretter, T. & Fischer, F. D., 1 Dec 1998, In: Computational materials science. 13, 1-3, p. 1-7 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  46. 1997
  47. Published

    Critical shapes and arrangements of carbides in high-speed tool steel

    Antretter, T. & Fischer, F. D., 1 Sept 1997, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 237, 1, p. 6-11 6 p.

    Research output: Contribution to journal › Article › Research › peer-review

  48. 1996
  49. Published

    The stress state around two spatially arranged ellipsoidal inclusions - A case study for high-speed tool steel

    Antretter, T. & Fischer, F. D., 1 Dec 1996, In: Computational materials science. 7, 1-2, p. 247-252 6 p.

    Research output: Contribution to journal › Article › Research › peer-review

Previous 1 2 3 4 5 Next
View graph of relations

Contact

Phone: 4000

Latest Research Output

View more (236)