Sophie Primig

(Former)

1 - 96 out of 96Page size: 100

Research output

  1. 2017
  2. E-pub ahead of print

    On grain boundary segregation in molybdenum materials

    Leitner, K., Felfer, P. J., Holec, D., Cairney, J. M., Knabl, W., Lorich, A., Clemens, H. & Primig, S., 11 Sept 2017, (E-pub ahead of print) In: Materials and Design. 135.2017, 5 December, p. 204-212 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  3. E-pub ahead of print

    Cold pilgering of duplex steel tubes: The response of austenite and ferrite to excessive cold deformation up to high strains

    Ragger, K., Primig, S., Daniel, R., Kaiser, R., Paal, J., Mitterer, C. & Buchmayr, B., 16 Mar 2017, (E-pub ahead of print) In: Materials characterization. 128.2017, June, p. 257–268 12 p.

    Research output: Contribution to journal › Article › Research › peer-review

  4. Published

    Influence of Heat Treatment on Microstructure Stability and Mechanical Properties of a Carbide-Free Bainitic Steel

    Hofer, C., Primig, S., Clemens, H., Winkelhofer, F. & Schnitzer, R., 7 Jan 2017, In: Advanced engineering materials. 19.2017, 4, 5 p., 1600658.

    Research output: Contribution to journal › Article › Research › peer-review

  5. Published

    Thermodynamic evaluation of the Mo-rich corner of the Mo-Hf-C system including O impurities

    Lang, D., Povoden-Karadeniz, E., Schatte, J., Knabl, W., Clemens, H. & Primig, S., 2017, In: Journal of alloys and compounds. 695.2017, 25 February, p. 372-381 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  6. 2016
  7. Published

    Induction Tempering vs Conventional Tempering of a Heat-Treatable Steel

    Sackl, S. C., Zuber, C., Clemens, H. & Primig, S., 3 May 2016, In: Metallurgical and materials transactions. A, Physical metallurgy and materials science . 47.2016, July, p. 3694-3703 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  8. Published

    Transmission Kikuchi Diffraction: A technique to support the atom probe specimen preparation

    Babinsky, K., Primig, S. & Clemens, H., 28 Apr 2016.

    Research output: Contribution to conference › Presentation › Research

  9. Published

    Korngrenzen in technisch reinem Molybdän: Eine atomare Untersuchung mittels Atomsondentomographie

    Babinsky, K., Primig, S., Knabl, W., Lorich, A., Clemens, H. & Sackl, S. C., 12 Apr 2016, p. 1-15. 15 p.

    Research output: Contribution to conference › Presentation › Research

  10. Published

    Applications of site-specific atom probe specimen preparation by focused ion beam and transmission Kikuchi diffraction

    Turk, C., Leitner, K., Lang, D., Haslberger, P., Hofer, C., Clemens, H. & Primig, S., 2016.

    Research output: Contribution to conference › Presentation › Research

  11. Published

    Correlative microscopy of a carbide-free bainitic steel

    Hofer, C., Bliznuk, V., Verdiere, A., Petrov, R., Winkelhofer, F., Clemens, H. & Primig, S., 2016, In: Micron. 81, p. 1-7

    Research output: Contribution to journal › Article › Research › peer-review

  12. Published

    Die Rolle der Metallographie bei der Charakterisierung von Hochleistungswerkstoffe

    Mayer, S., Rashkova, B., Mendez Martin, F., Primig, S., Panzenböck, M. & Clemens, H., 2016, In: Jahresmagazin Materialographie, Metallographie : Ingenieurwissenschaften ... : im Fokus. 2016, p. 82-87 6 p.

    Research output: Contribution to journal › Article › Research › peer-review

  13. Published

    Evolution of strain-induced hafnium carbides in a molybdenum base MoeHfeC alloy studied by small-angle neutron scattering and complementary methods

    Lang, D., Karge, L., Schatte, J., Gilles, R., Dallinger, R., Weißensteiner, I., Staron, P., Knabl, W., Primig, S. & Clemens, H., 2016, In: Journal of alloys and compounds. 688, p. 619-631 13 p.

    Research output: Contribution to journal › Article › Research › peer-review

  14. Published

    Fracture Behavior and Delamination Toughening of Molybdenum in Charpy Impact Tests

    Leitner, K., Primig, S., Knabl, W., Lorich, A., Stickler, R. & Clemens, H., 2016, In: JOM. 68, 11, p. 2854-2863 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  15. Published

    Impact of the B2 ordering behavior on the mechanical properties of a Fe Co Mo alloy

    Turk, C., Leitner, H., Kellezi, G., Clemens, H., Gan, W., Staron, P. & Primig, S., 2016, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 662, p. 511-518 8 p., 662.

    Research output: Contribution to journal › Article › Research › peer-review

  16. Published

    Influence of impurities on the fracture behavior of molybdenum-hafnium alloys

    Babinsky, K., Primig, S., Knabl, W., Lorich, A. & Clemens, H., 2016.

    Research output: Contribution to conference › Presentation › Research

  17. Published

    Morphology change of retained austenite during austempering of carbide-freebainiticsteel

    Hofer, C., Winkelhofer, F., Clemens, H. & Primig, S., 2016, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 664, p. 236-246 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  18. Published

    On the chemistry of the carbides in a molydbenum base Mo-Hf-C alloy produced by powder metallurgy

    Lang, D., Pöhl, C., Holec, D., Schatte, J., Povoden-Karadeniz, E., Knabl, W., Clemens, H. & Primig, S., 2016, In: Journal of alloys and compounds. 654, p. 445-454

    Research output: Contribution to journal › Article › Research › peer-review

  19. Published

    On the evolution of secondary hardening carbides during continuous versus isothermal heat treatment of high speed steel HS 6-5-2

    Sackl, S. C., Leitner, H., Clemens, H. & Primig, S., 2016, In: Materials characterization. p. 323-330 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  20. 2015
  21. Published

    Boron grain boundary segregation in a heat treatable steel

    Haslberger, P., Turk, C., Babinsky, K., Caliskanoglu, D., Clemens, H. & Primig, S., 15 Mar 2015, In: Berg- und hüttenmännische Monatshefte : BHM. 160.2015, 5, p. 204-208 5 p.

    Research output: Contribution to journal › Article › Research › peer-review

  22. Published

    B2 order transformation in a Fe - 25 at% Co-9 at% Mo alloy

    Turk, C., Kellezi, G., Harald, L., Peter, S., Gan, W., Clemens, H. & Primig, S., 2015, Materials Research Society Symposium Proceedings Vol. 1760. Vol. 1760.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  23. Published

    Bruchverhalten von technisch reinem Molybdan im Kerbschlagbiegeversuch

    Babinsky, K., Lorich, A., Knabl, W., Stickler, R., Clemens, H. & Primig, S., 2015, p. 277.

    Research output: Contribution to conference › Poster › Research › peer-review

  24. Published

    Comparison of continuous and isothermal tempering of a High Speed Steel

    Sackl, S. C., Kellezi, G., Leitner, H., Clemens, H. & Primig, S., 2015, Proceedings of the International Conference on Solid-Solid Phase Transformations in Inorganic Materials . p. 99-100

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  25. Published

    Comparison of the continuous and isothermal tempering of a HS 6-5-2 high speed steel

    Sackl, S. C., Kellezi, G., Leitner, H., Clemens, H. & Primig, S., 2015.

    Research output: Contribution to conference › Presentation › Research › peer-review

  26. Published

    Correlative microscopy and atom probe tomography of the M-A constituent in a carbide-free bainite

    Hofer, C., Bliznuk, V., Verdiere, A., Petrov, R., Winkelhofer, F., Clemens, H. & Primig, S., 2015.

    Research output: Contribution to conference › Poster › Research

  27. Published

    Evolution of strain-induced precipitates in a molybdenum base Mo-Hf-C alloy

    Lang, D., Karge, L., Schatte, J., Gilles, R., Staron, P., Clemens, H. & Primig, S., 2015.

    Research output: Contribution to conference › Poster › Research › peer-review

  28. Published

    Evolution of strain-induced precipitates in a molybdenum base Mo-Hf-C alloy

    Lang, D., Dallinger, R., Karge, L., Schatte, J., Gilles, R., Knabl, W., Staron, P., Clemens, H. & Primig, S., 2015.

    Research output: Contribution to conference › Presentation › Research › peer-review

  29. Published

    Evolution of strain-induced precipitates in a molybdenum base Mo-Hf-C alloy

    Lang, D., Schatte, J., Knabl, W., Dallinger, R., Clemens, H. & Primig, S., 2015, Proceedings of the 2015 International Conference on Powder Metallurgy & Particulate Materials. Bingert, S. R. & Luk, S. H. (eds.). p. 08-1-08-7

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  30. Published

    Evolution of strain-induced precipitates in a molybdenum-base Mo-Hf-C alloy

    Lang, D., Schatte, J., Knabl, W., Dallinger, R., Clemens, H. & Primig, S., 2015, In: International Journal of Powder Metallurgy. 51, 4

    Research output: Contribution to journal › Article › Research › peer-review

  31. Published

    Grain boundary study of technically pure molybdenum by combining APT and TKD

    Babinsky, K., Knabl, W., Lorich, A., De Kloe, R., Clemens, H. & Primig, S., 2015, In: Ultramicroscopy. 159, p. 445-451 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  32. Published

    Influence of the sample preparation technique on the μ phase fraction analysis in a Fe-25Co-15Mo alloy by means of XRD

    Turk, C., Clemens, H., Primig, S., Kellezi, G. & Leitner, H., 2015, In: Practical metallography = Praktische Metallographie. 52, 6, p. 323-333

    Research output: Contribution to journal › Article › Research › peer-review

  33. Published

    Investigation of the self tempering effect of martensite by means of atom probe tomography

    Sackl, S. C., Clemens, H. & Primig, S., 2015, In: Practical metallography = Praktische Metallographie. 52, 7, p. 374-383

    Research output: Contribution to journal › Article › Research › peer-review

  34. Published

    Metallography - A Powerful Instrument for Material Characterisation, Material Development and Failure Analysis

    Panzenböck, M., Hawranek, G., Mendez Martin, F., Mayer, S., Pölzl, S., Schütz, P., Primig, S., Rashkova, B. & Clemens, H., 2015.

    Research output: Contribution to conference › Presentation › Research › peer-review

  35. Published

    On the chemistry of the carbides in a molybdenum base Mo-Hf-C alloy produced by powder metallurgy

    Lang, D., Pöhl, C., Holec, D., Schatte, J., Povoden-Karadeniz, E., Knabl, W., Primig, S. & Clemens, H., 2015.

    Research output: Contribution to conference › Poster › Research

  36. Published

    Order Transition and its impact on mechanical properties of a Fe - 25 at% Co-9 at% Mo alloy

    Turk, C., Kellezi, G., Harald, L., Clemens, H. & Primig, S., 2015, p. 307.

    Research output: Contribution to conference › Poster › Research › peer-review

  37. Published

    Orientation dependent recovery and recrystallization behavior of hot-rolled molybdenum

    Primig, S., Clemens, H., Knabl, W., Lorich, A. & Stickler, R., 2015, In: International journal of refractory metals & hard materials. 48, p. 179-186

    Research output: Contribution to journal › Article › Research › peer-review

  38. Published

    Preparation of carbide-free bainitic steels for EBSD investigations

    Hofer, C., Clemens, H. & Primig, S., 2015, In: Practical metallography = Praktische Metallographie. 52, 7, p. 384-395

    Research output: Contribution to journal › Article › Research › peer-review

  39. Published

    Reconstruction of grain boundaries by crystallographic features: A method applicable for reflectron data?

    Babinsky, K., Gault, B., Clemens, H. & Primig, S., 2015.

    Research output: Contribution to conference › Presentation › Research

  40. Published

    Structural characterization of "carbide-free" bainite in a Fe-0.2C-1.5Si-2.5Mn steel

    Hofer, C., Harald, L., Winkelhofer, F., Clemens, H. & Primig, S., 2015, In: Materials characterization. 102, p. 85-91

    Research output: Contribution to journal › Article › Research › peer-review

  41. Published

    Texture evolution during deformation of a Mo-Hf-C alloy studied with electron backscatter diffraction

    Lang, D., Schatte, J., Knabl, W., Clemens, H. & Primig, S., 2015, In: Berg- und hüttenmännische Monatshefte : BHM. 160, 5, p. 226-230

    Research output: Contribution to journal › Article › Research › peer-review

  42. Published

    The role of metallography in the development and characterization of high-performance materials

    Mayer, S., Hawranek, G., Mendez Martin, F., Panzenböck, M., Pölzl, S., Primig, S., Rashkova, B. & Clemens, H., 2015, In: Practical metallography = Praktische Metallographie. 52.2015, 2, p. 59-74 6 p.

    Research output: Contribution to journal › Article › Research › peer-review

  43. 2014
  44. Published

    Advanced Steels

    Clemens, H., Primig, S., Mendez Martin, F., Babinsky, K., Hofer, C., Lang, D., Sackl, S. C., Turk, C. & Weißensteiner, I., 2014.

    Research output: Contribution to conference › Poster › Research › peer-review

  45. Published

    A novel approach for site-specific atom probe specimen preparation by FIB and transmission-EBSD

    Babinsky, K., De Kloe, R., Clemens, H. & Primig, S., 2014.

    Research output: Contribution to conference › Presentation › Research › peer-review

  46. Published

    A novel approach for site-specific atom probe specimen preparation by focused ion beam and transmission electron backscatter diffraction

    Babinsky, K., De Kloe, R., Clemens, H. & Primig, S., 2014, In: Ultramicroscopy. 144, p. 9-18

    Research output: Contribution to journal › Article › Research › peer-review

  47. Published

    APT/FIM and neutron diffraction study of the ordering mechanism in a Fe-Co-Mo-alloy

    Turk, C., Primig, S., Clemens, H., Leitner, H. & Kellezi, G., 2014.

    Research output: Contribution to conference › Presentation › Research › peer-review

  48. Published

    Atom probe study of boron segregation in a martensitic steel prepared according to a novel FIB/t-EBSD preparation technique

    Turk, C., Babinsky, K., Haslberger, P., Clemens, H. & Primig, S., 2014.

    Research output: Contribution to conference › Poster › Research › peer-review

  49. Published

    Atom probe study of grain boundaries in technically pure molybdenum

    Babinsky, K., Knabl, W., Lorich, A., De Kloe, R., Clemens, H. & Primig, S., 2014.

    Research output: Contribution to conference › Presentation › Research › peer-review

  50. Published

    Atom probe study of grain boundary segregation on technically pure molybdenum

    Babinsky, K., Weidow, J., Knabl, W., Lorich, A., Leitner, H. & Primig, S., 2014, In: Materials characterization. 87, p. 95-103

    Research output: Contribution to journal › Article › Research › peer-review

  51. Published

    Atom probe tomography of carbides occuring in "carbide-free" bainitic steels

    Hofer, C., Winkelhofer, F., Krammerbauer, J., Clemens, H. & Primig, S., 2014.

    Research output: Contribution to conference › Presentation › Research › peer-review

  52. Published

    B2 order transformation in a Fe - 25 at% Co - 9 at% Mo alloy

    Turk, C., Kellezi, G., Leitner, H., Gan, W., Staron, P., Clemens, H. & Primig, S., 2014.

    Research output: Contribution to conference › Presentation › Research › peer-review

  53. Published

    Combining Fib, t-EBSD and atom probe tomography for full chemical and crystallographic materials characterization

    Babinsky, K., De Kloe, R., Haslberger, P., Hofer, C., Lang, D., Turk, C., Clemens, H. & Primig, S., 2014.

    Research output: Contribution to conference › Presentation › Research › peer-review

  54. Published

    Die Rolle der Metallographie bei Entwicklung und Charakterisierung von Hochleistungswerkstoffen

    Mayer, S., Hawranek, G., Mendez Martin, F., Panzenböck, M., Pölzl, S., Primig, S., Rashkova, B. & Clemens, H., 2014, Sonderbände der Praktischen Metallographie 46. p. 3-12

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  55. Published

    Early stages of precipitation: Experiments and Modelling

    Primig, S., Leitner, H. & Kozeschnik, E., 2014, In: Berg- und hüttenmännische Monatshefte : BHM. 159, p. 5-11

    Research output: Contribution to journal › Article › Research › peer-review

  56. Published

    EBSD study of the microstructural evolution during hot compression testing of a superduplex steel

    Primig, S., Ragger, K. & Buchmayr, B., 2014, EBSD study of the microstructural evolution during hot compression testing of a superduplex stee. p. 973-979

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  57. Published

    EBSD Untersuchungen an warmumgeformtem Superduplexstahl

    Primig, S., Ragger, K. & Buchmayr, B., 2014, 14. Int. Metallographie-Tagung. p. 1-10

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  58. Published

    EBSD Untersuchungen von warmumgeformten Superduplexstahl

    Primig, S., Ragger, K., Clemens, H. & Buchmayr, B., 2014, Sonderbände der Praktischen Metallographie 46. p. 107-112

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  59. Published

    Einfluss der Mikrolegierung (Nb, Al, N) auf die Feinkornbeständigkeit von Einsatzstählen vom Typ 18CrNiMo7-6

    Zacharias, H., Arndt, J. & Primig, S., 2014, In: Berg- und hüttenmännische Monatshefte : BHM. 159, p. 296-297

    Research output: Contribution to journal › Article › Research › peer-review

  60. Published

    Einfluss der Mikrolegierung (Nb, Al, N) auf die Feinkornbeständigkeit von Einsatzstählen vom Typ 18CrNiMo7-6

    Zacharias, H., Arndt, J. & Primig, S., 2014.

    Research output: Contribution to conference › Poster › Research › peer-review

  61. Published

    Einfluss der Präparationstechnik bei der Bestimmung des µ-Phasenanteils in einer Fe-25Co-15Mo Legierung mittels XRD

    Turk, C., Kellezi, G., Leitner, H., Clemens, H. & Primig, S., 2014, Sonderbände der Praktischen Metallographie 46. p. 101-106

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  62. Published

    Einfluss der Präparationstechnik bei der Bestimmung des µ-Phasenanteils in einer Fe-25Co-15Mo Legierung mittels XRD

    Turk, C., Kellezi, G., Leitner, H., Clemens, H. & Primig, S., 2014, p. 101-106.

    Research output: Contribution to conference › Presentation › Research › peer-review

  63. Published

    Elektrolytisches Polieren vs. Vibrationspolieren: Entwicklung einer Präparationsmethode zur EBSD-Analyse der Mo-Basislegierung MHC

    Lang, D., Schatte, J., Clemens, H. & Primig, S., 2014, Sonderbände der Praktischen Metallographie 46. p. 59-64

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  64. Published

    Evolution of precipitates and martensitic substructure during continuous heat treatment

    Mayer, W., Sackl, S. C., Shan, Y. V., Primig, S. & Kozeschnik, E., 2014.

    Research output: Contribution to conference › Poster › Research › peer-review

  65. Published

    High Performance Materials

    Clemens, H., Primig, S., Mendez Martin, F., Babinsky, K., Hofer, C., Lang, D., Sackl, S. C., Turk, C. & Weißensteiner, I., 2014.

    Research output: Contribution to conference › Poster › Research › peer-review

  66. Published

    Induction hardening vs conventional hardening of a heat treatable steel

    Sackl, S. C., Leitner, H., Zuber, M., Clemens, H. & Primig, S., 2014, In: Metallurgical and materials transactions. A, Physical metallurgy and materials science . 45A, p. 5657-5666

    Research output: Contribution to journal › Article › Research › peer-review

  67. Published

    Influence of deformation on the precipitation behavior of Nb (CN) in austenite and ferrite

    Nöhrer, M., Mayer, W., Primig, S., Zamberger, S., Kozeschnik, E. & Leitner, H., 2014, In: Metallurgical and materials transactions. A, Physical metallurgy and materials science . 45 A, p. 4210-4219

    Research output: Contribution to journal › Article › Research › peer-review

  68. Published

    Neue Ansätze zur Zielpräparation von Atomsondenspitzen mittels Focused Ion Beam und Durchstrahlungs-EBSD

    Babinsky, K., Haslberger, P., Turk, C., Clemens, H. & Primig, S., 2014, Sonderbände der Praktischen Metallographie 46. p. 361-366

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  69. Published

    Neue Ansätze zur Zielpräparation von Atomsondenspitzen mittels Focused Ion Beam und Durchstrahlungs-EBSD

    Babinsky, K., Haslberger, P., Turk, C., Clemens, H. & Primig, S., 2014, p. 361-366.

    Research output: Contribution to conference › Presentation › Research › peer-review

  70. Published

    New findings on the atomistic mechanisms active during mechanical milling of a Fe-Y2O3 model alloy

    Ressel, G., Parz, P., Primig, S., Leitner, H., Clemens, H. & Puff, W., 2014, In: Journal of applied physics. 115, p. 1243131-1243137

    Research output: Contribution to journal › Article › Research › peer-review

  71. Published

    On the behavior of yttria/yttrium during mechanical alloying of a Fe-Y2O3 model alloy system

    Ressel, G., Parz, P., Fian, A., Holec, D., Primig, S., Puff, W., Leitner, H. & Clemens, H., 2014, Advanced Materials Research. p. 598-603

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  72. Published

    On the precipitation mechanism in the molybdenum based alloy MHC (mo-HF-C)

    Lang, D., Pöhl, C., Schatte, J., Primig, S. & Leitner, H., 2014, In: Powder metallurgy progress. 57, p. 311-313

    Research output: Contribution to journal › Article › Research › peer-review

  73. Published

    Origin of high temperature oxidation resistance of Ti-Al-Ta-N coatings

    Hollerweger, R., Riedl, H., Paulitsch, J., Arndt, M., Rachbauer, R., Polcik, P., Primig, S. & Mayrhofer, P. H., 2014, In: Surface & coatings technology. 257, p. 78-86

    Research output: Contribution to journal › Article › Research › peer-review

  74. Published

    Präparation von karbidfreien bainitischen Stählen für EBSD-Untersuchungen

    Hofer, C., Clemens, H. & Primig, S., 2014, Sonderbände der Praktischen Metallographie 46. p. 71-76

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  75. Published

    Präparation von karbidfreien bainitischen Stählen für EBSD-Untersuchungen

    Hofer, C., Clemens, H. & Primig, S., 2014, p. 71-76.

    Research output: Contribution to conference › Presentation › Research › peer-review

  76. Published

    The effect of Zr incorporation caused by ball abrasion in a milled Fe-Y2O3 model alloy

    Ressel, G., Primig, S. & Leitner, H., 2014, In: Metallurgical and materials transactions. A, Physical metallurgy and materials science . 45, p. 1552-1558

    Research output: Contribution to journal › Article › Research › peer-review

  77. Published

    Untersuchung des Selbstanlasseffektes von Martensit mit Hilfe von Atomsondentomographie

    Sackl, S. C., Clemens, H. & Primig, S., 2014, Sonderbände der Praktischen Metallographie 46. p. 209-214

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  78. Published

    Widmannstätten austenite formation in a superduplex steel

    Primig, S. & Clemens, H., 2014.

    Research output: Contribution to conference › Poster › Research › peer-review

  79. 2013
  80. Published

    Atom probe study of vanadium interphase precipitates and randomly distributed vanadium precipitates in ferrite

    Nöhrer, M., Zamberger, S., Primig, S. & Leitner, H., 2013, In: Micron. 54-55, p. 57-64

    Research output: Contribution to journal › Article › Research › peer-review

  81. Published

    Comparison the carbon distribution in continuously and conventionally hardened martensite in a 42CrMo4

    Sackl, S. C., Zuber, M., Primig, S. & Leitner, H., 2013.

    Research output: Contribution to conference › Poster › Research › peer-review

  82. Published

    Grain boundary segregations in technically pure molybdenum

    Babinsky, K., Primig, S., Knabl, W., Lorich, A., Weingärtner, T., Weidow, J. & Leitner, H., 2013.

    Research output: Contribution to conference › Poster › Research › peer-review

  83. Published

    On the behavior of yttria/yttrium during mechanical alloying of a Fe-Y2O3 model alloy system

    Ressel, G., Parz, P., Fian, A., Holec, D., Primig, S., Puff, W., Leitner, H. & Clemens, H., 2013.

    Research output: Contribution to conference › Poster › Research › peer-review

  84. Published

    Phase characterization of multi-phase advanced high strength steels

    Hofer, C., Primig, S., Pichler, A., Krammerbauer, J. & Leitner, H., 2013.

    Research output: Contribution to conference › Poster › Research › peer-review

  85. Published

    The evolution of Y distribution during the processing route of mechnically alloyed iron studied by means of atom probe tomography

    Ressel, G., Primig, S. & Leitner, H., 2013, In: International journal of materials research : IJMR ; Zeitschrift für Metallkunde. 104, p. 1088-1095

    Research output: Contribution to journal › Article › Research › peer-review

  86. 2012
  87. Published

    Influence of the heating rate on the recrystallization behavior of molybdenum

    Primig, S., Leitner, H., Knabl, W., Lorich, A., Clemens, H. & Stickler, R., 2012, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 535, p. 316-324

    Research output: Contribution to journal › Article › Research › peer-review

  88. Published

    Recovery and recrystallization behavior of technically pure molybdenum

    Primig, S., 2012, 138 p.

    Research output: Thesis › Doctoral Thesis

  89. Published

    Static recrystallization of molybdenum after deformation below 0.5TM(K)

    Primig, S., Leitner, H., Knabl, W., Lorich, A. & Stickler, R., 2012, In: Metallurgical and materials transactions. A, Physical metallurgy and materials science . 43, p. 4806-4818

    Research output: Contribution to journal › Article › Research › peer-review

  90. Published

    Textural evolution during dynamic recovery and static recrystallization of molybdenum

    Primig, S., Leitner, H., Knabl, W., Lorich, A., Clemens, H. & Stickler, R., 2012, In: Metallurgical and materials transactions. A, Physical metallurgy and materials science . 43, p. 4794-4805

    Research output: Contribution to journal › Article › Research › peer-review

  91. 2011
  92. Published

    SEM and TEM Investigations of Recovery and Recrystallization in Technically Pure Molybdenum

    Primig, S., Leitner, H., Lorich, A., Knabl, W., Clemens, H. & Stickler, R., 2011, In: Practical metallography = Praktische Metallographie. p. 344-355

    Research output: Contribution to journal › Article › Research › peer-review

  93. Published

    Separation of overlapping retained austenite decomposition and cementite precipitation reactions during tempering of martensitic steel by means of thermal analysis

    Primig, S. & Leitner, H., 2011, In: Thermochimica Acta. p. 111-117

    Research output: Contribution to journal › Article › Research › peer-review

  94. 2010
  95. Published

    Erholungs- und Rekristallisationsverhalten von technisch reinem Molybdän

    Primig, S., Leitner, H., Clemens, H., Stickler, R., Lorich, A., Knabl, W. & Köck, W., 2010, In: Berg- und hüttenmännische Monatshefte : BHM. 155, p. 20-25

    Research output: Contribution to journal › Article › Research › peer-review

  96. Published

    Magnetic-field-dependent small-angle neutron scattering on steels

    Zickler, G., Michels, A., Primig, S., Schweins, R. & Leitner, H., 2010

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  97. Published

    On the recrystallization behavior of technically pure molybdenum

    Primig, S., Leitner, H., Clemens, H., Lorich, A., Knabl, W. & Stickler, R., 2010, In: International journal of refractory metals & hard materials. p. 703-708

    Research output: Contribution to journal › Article › Research › peer-review

  98. Published

    SEM and TEM investigations of recovery and recrystallization in Technically pure Molybdenum

    Primig, S., Leitner, H., Lorich, A., Knabl, W., Clemens, H. & Stickler, R., 2010, Fortschritte in der Metallographie. Werkstoff-Informationsges., p. 289-294

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  99. Published

    The influence of aging treatments on the precipitation behavior in the nickel-based superalloy 718Plus

    Zickler, G., Primig, S., Lerchbacher, C., Nöhrer, M., Leitner, H. & Eckerlebe, H., 2010

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  100. Published

    Transformation from continuous to isothermal aging applied on a maraging steel

    Primig, S. & Leitner, H., 2010.

    Research output: Contribution to conference › Poster › Research › peer-review

  101. Published

    Transformation from continuous-to-isothermal aging applied on a maraging steel

    Primig, S. & Leitner, H., 2010, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 527, p. 4399-4405

    Research output: Contribution to journal › Article › Research › peer-review

  102. 2009
  103. Published

    Characterisation of precipitates in a maraging steel

    Zickler, G., Primig, S., Leitner, H., Sharp, M. & Eckerlebe, H., 2009

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  104. Published

    On the Recrystallization Behavior of Technically Pure Molybdenum

    Primig, S., Leitner, H., Rodriguez Chavez, A., Clemens, H., Lorich, A., Knabl, W. & Stickler, R., 2009, proc. in 17 th Plansee Seminar. p. 15/1-15/9

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  105. 2008
  106. Published

    Einfluss des Mikrogefüges auf die Maßänderung von HSS Legierungen während der Wärmebehandlung

    Primig, S., 2008

    Research output: Thesis › Diploma Thesis

View graph of relations

Latest Research Output

View more (96)