Ronald Schnitzer

1 - 141 out of 141Page size: 500

Research output

  1. 2025
  2. Published

    Effect of tramp elements on the microstructural evolution of a ferritic-pearlitic steel

    Hatzenbichler, L., Vincely, C., Haslberger, P., Galler, M., Glushko, O., Holec, D., Clemens, H. & Schnitzer, R., 21 Feb 2025, In: Practical metallography = Praktische Metallographie. 62.2025, 3, p. 148-175 28 p.

    Research output: Contribution to journal › Article › Research

  3. 2024
  4. Published

    Microstructural insights into the coarse‑grained heat‑affected zone of a high‑strength all‑weld metal: Development of a continuous cooling transformation diagram

    Schrittwieser, D., Marin Morales, D., Pahr, H., Lumper-Wimler, L., Glushko, O. & Schnitzer, R., 18 Dec 2024, In: Welding in the world. 69.2025, March, p. 813-823 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  5. Published

    Revealing the embrittlement phenomena after post-weld heat treatment of high-strength weld metal using high-resolution microscopy

    Schrittwieser, D., Pahr, H., Musi, M., Landefeld, A., Glushko, O. & Schnitzer, R., 21 Oct 2024, In: Journal of Materials Research and Technology. 33.2024, November-December, p. 5289-5298 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  6. Published

    Novel Fe-Mo intermetallic composite synthesized via diffusional-displacive mixed-mode transformation

    Varanasi, R. S., Srikakulapu, K., Utsumi, R., Saitoh, H., Schnitzer, R., Akiyama, E. & Koyama, M., 18 Aug 2024, In: Materials characterization. 216.2024, October, 10 p., 114287.

    Research output: Contribution to journal › Article › Research › peer-review

  7. Published

    Interplay between alloying and tramp element effects on temper embrittlement in bcc iron: DFT and thermodynamic insights

    Reiners-Sakic, A., Schnitzer, R. & Holec, D., 27 May 2024, In: Acta materialia. 275.2024, 15 August, 12 p., 120044.

    Research output: Contribution to journal › Article › Research › peer-review

  8. Published

    Effect of intercritical annealing on the microstructure and mechanical properties of a PH 13-8 Mo maraging steel

    Rosenauer, A., Teusl, S., Landefeld, A., Brandl, D., Ressel, G., Hönigmann, T., Stadler, M., Turk, C., Maawad, E., Stockinger, M. & Schnitzer, R., Mar 2024, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 895.2024, March, 13 p., 146220.

    Research output: Contribution to journal › Article › Research › peer-review

  9. Published

    Multiscale in-situ observations of the micro- and nanostructure of a PH 13-8 Mo maraging steel during austenitization

    Rosenauer, A., Brandl, D., Ressel, G., Hönigmann, T., Stadler, M., Turk, C., Gammer, C., Wiessner, M., Gamsjäger, E., Stockinger, M. & Schnitzer, R., Feb 2024, In: Materials characterization. 208.2024, February, 13 p., 113554.

    Research output: Contribution to journal › Article › Research › peer-review

  10. 2023
  11. Published

    In Situ Observations of the Microstructural Evolution during Heat Treatment of a PH 13-8 Mo Maraging Steel

    Rosenauer, A., Brandl, D., Ressel, G., Lukas, S., Gruber, C., Stockinger, M. & Schnitzer, R., Jun 2023, In: Advanced engineering materials. 25.2023, 12, 12 p., 2300410.

    Research output: Contribution to journal › Article › Research › peer-review

  12. Published

    Strengthening effect of NiAl and Ni3Ti precipitates in Co-free maraging steels

    Zeisl, S., Van Steenberge, N. & Schnitzer, R., 19 Apr 2023, In: Journal of materials science. 58.2023, April, p. 7149–7160 12 p.

    Research output: Contribution to journal › Article › Research › peer-review

  13. Published

    Influence of platform preheating on in situ precipitation in an FeCoMo alloy during laser powder bed fusion

    Cui, C., Leitner, H., Platl, J. & Schnitzer, R., Mar 2023, In: Materials characterization. 197.2023, March, 10 p., 112689.

    Research output: Contribution to journal › Article › Research › peer-review

  14. Published

    Intercritical annealing of a PH 13-8 Mo maraging steel

    Rosenauer, A., Brandl, D., Ressel, G., Stadler, M., Stockinger, M. & Schnitzer, R., 2023, 28th IFHTSE 2023 Congress. (28th IFHTSE 2023 Congress).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  15. Published

    Precipitate evolution in an iron-based superalloy

    Jelinek, A., Renk, O., Juarez Perez, L., Platl, J. & Schnitzer, R., 2023.

    Research output: Contribution to conference › Poster › Research

  16. 2022
  17. Published

    Critical Aspects Concerning Large-scale Production of a Batch-annealed Medium-Mn 780 MPa Grade for Automotive Applications

    Steineder, K., Krizan, D., Stadler, M., Ritsche, S., Berger, E., Holtmann, N., Schnitzer, R. & Schneider, R., 18 Nov 2022, In: Berg- und hüttenmännische Monatshefte : BHM. 167.2022, 11, p. 513-516 4 p.

    Research output: Contribution to journal › Article › Research › peer-review

  18. Published

    The role of alloying elements in NiAl and Ni3Ti strengthened Co-free maraging steels

    Zeisl, S., Landefeld, A., Van Steenberge, N., Chang, Y. & Schnitzer, R., 9 Nov 2022, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 861.2022, 19 December, 9 p., 144313.

    Research output: Contribution to journal › Article › Research › peer-review

  19. E-pub ahead of print

    Hardness Loss of Plastic Mold Steels: Phenomenon in Injection Molding

    Zidar, D., Landefeld, A., Gschöpf, B., Schnitzer, R., Zunko, H. & Friesenbichler, W., 28 Sept 2022, (E-pub ahead of print) In: Steel research international. 2022, 11, 7 p., 2200326.

    Research output: Contribution to journal › Article › Research › peer-review

  20. Published

    Hardness Loss of Plastic Mold Steels: Phenomenon in Injection Molding

    Zidar, D., Landefeld, A., Gschöpf, B., Schnitzer, R., Zunko, H. & Friesenbichler, W., 28 Sept 2022, In: Steel research international. 94.2022, 4, 7 p., 2200326.

    Research output: Contribution to journal › Article › Research › peer-review

  21. Published

    Local microstructural evolution and the role of residual stresses in the phase stability of a laser powder bed fused cold-work tool steel

    Platl, J., Bodner, S. C., Harald, L., Turk, C., Nielsen, M.-A., Keckes, J. & Schnitzer, R., 22 Sept 2022, In: Materials characterization. 193.2022, November, 11 p., 112318.

    Research output: Contribution to journal › Article › Research › peer-review

  22. E-pub ahead of print

    Influence of delta ferrite on the impact toughness of a PH 13-8 Mo maraging steel

    Rosenauer, A., Brandl, D., Ressel, G., Lukas, S., Monschein, S., Stockinger, M. & Schnitzer, R., 19 Sept 2022, (E-pub ahead of print) In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 856.2022, 20 October, 11 p., 144024.

    Research output: Contribution to journal › Article › Research › peer-review

  23. Published

    Ab initio study of alloying Impact on the stability of cementite in transformation-Induced plasticity-assisted advanced steels

    Sakic, A., Hofer, C., Schnitzer, R. & Holec, D., 18 Sept 2022, In: Advanced engineering materials. 24.2022, 11, 10 p., 2200532.

    Research output: Contribution to journal › Article › Research › peer-review

  24. Published

    Effect of post weld heat treatment on the interplay of microstructure, precipitates and properties of creep-resistant 2.25Cr-1Mo-0.25V weld metal

    Fleißner-Rieger, H., Musi, M., Albu, M., Krein, R. & Schnitzer, R., 5 Jul 2022, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 850.2022, 11 August, 11 p., 143550.

    Research output: Contribution to journal › Article › Research › peer-review

  25. Published

    Determination of the degree of recrystallization of a microalloyed HSLA steel by using metallographic methods

    Monschein, S., Kostwein, N., Ragger, K., Zügner, D., Fasching, J. & Schnitzer, R., 30 Jun 2022, In: Practical metallography = Praktische Metallographie. 59.2022, 6, p. 317-339 25 p.

    Research output: Contribution to journal › Article › Research › peer-review

  26. Published

    Duplex heat treatment of a precipitation hardening carburising steel

    Böhle, S. I., Strobl, V., Lechleitner, J. & Schnitzer, R., 30 Jun 2022, In: HTM - journal of heat treatment and materials . 77.2022, 3, p. 197-213 17 p.

    Research output: Contribution to journal › Article › Research › peer-review

  27. Published

    Potential Causes for Cracking of a Laser Powder Bed Fused Carbon-free FeCoMo Alloy

    Platl, J., Rainer, D., Leitner, H., Turk, C., Galbusera, F., Demir, A. G., Previtali, B. & Schnitzer, R., 18 May 2022, In: Berg- und hüttenmännische Monatshefte : BHM. 167.2022, July, p. 325-331 17 p.

    Research output: Contribution to journal › Article › Research › peer-review

  28. Published

    Processability and cracking behaviour of novel high-alloyed tool steels processed by laser powder bed fusion

    Galbusera, F., Demir, A. G., Platl, J., Turk, C., Schnitzer, R. & Previtali, B., Apr 2022, In: Journal of materials processing technology. 302.2022, April, 17 p., 117435.

    Research output: Contribution to journal › Article › Research › peer-review

  29. Published

    Influence of the Ti Content on the Grain Stability and the Recrystallization Behavior of Nb-Alloyed High-Strength Low-Alloyed Steels

    Monschein, S., Ragger, K., Zügner, D., Fasching, J. & Schnitzer, R., 30 Mar 2022, In: Steel research international. 93.2022, 5, 8 p., 2200094.

    Research output: Contribution to journal › Article › Research › peer-review

  30. Published

    Cooling rate controlled aging of a Co-Free Fe-Ni-Cr-Mo-Ti-Al maraging steel

    Zeisl, S. & Schnitzer, R., 22 Mar 2022, In: Metals : open access journal . 12.2022, 4, 12 p., 538.

    Research output: Contribution to journal › Article › Research › peer-review

  31. Published

    Cracking mechanism in a laser powder bed fused cold-work tool steel: The role of residual stresses, microstructure and local elemental concentrations

    Platl, J., Bodner, S. C., Hofer, C., Landefeld, A., Leitner, H., Turk, C., Nielsen, M.-A., Demir, A. G., Previtali, B., Keckes, J. & Schnitzer, R., 15 Feb 2022, In: Acta materialia. 225.2022, 15 February, 16 p., 117570.

    Research output: Contribution to journal › Article › Research › peer-review

  32. Published

    Microstructural, chemical, and crystallographic investigations of dynamic strain‐induced ferrite in a microalloyed QT steel

    Monschein, S., Ragger, K., Fasching, J., Zügner, D. & Schnitzer, R., 10 Feb 2022, In: Materials. 12.2022, 2, 14 p., 313.

    Research output: Contribution to journal › Article › Research › peer-review

  33. Published

    Consideration of critical aspects concerning large-scale production and use in automotive applications based on an optimized alloying concept for a batch-annealed medium-Mn780 grade

    Steineder, K., Krizan, D., Stadler, M., Ritsche, S., Berger, E., Holtmann, N., Schnitzer, R. & Schneider, R., 2022, Proceedings of the 5th Int. High Manganese Steel Conf.. p. 79-82

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  34. Published

    Critical aspects concerning large-scale production of a batch-annealed medium-Mn 780 MPa grade for automotive applications

    Steineder, K., Krizan, D., Stadler, M., Ritsche, S., Berger, E., Holtmann, N., Schnitzer, R. & Schneider, R., 2022, 5th International High Manganese Steel Conference. p. 79-82

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  35. Published

    High-resolution characterization of precipitates in multi-layer submerged-arc welded 2.25Cr-1Mo-0.25V steel

    Fleißner-Rieger, H., Kremmer, T., Brabetz, M., Krein, R., Pahr, H., Peruzzi, M. & Schnitzer, R., 2022, In: Materials Today Communications. 31.2022, June, 11 p., 103299.

    Research output: Contribution to journal › Article › Research › peer-review

  36. Published

    How to increase scrap recycling

    Häuselmann, M., Rieger, J., Schenk, J., Schnitzer, R., Sakic, A., Michelic, S. K. & Cejka, J., 2022, In: Steel times international. 46.2022, 8*December, p. 34-38 5 p.

    Research output: Contribution to journal › Article › Research

  37. 2021
  38. Published

    On the impact of post weld heat treatment on the microstructure and mechanical properties of creep resistant 2.25Cr–1Mo–0.25V weld metal

    Schönmaier, H., Fleißner-Rieger, C., Krein, R., Schmitz-Niederau, M. & Schnitzer, R., Dec 2021, In: Journal of materials science. 56.2021, 36, p. 20208-20223 16 p.

    Research output: Contribution to journal › Article › Research › peer-review

  39. Published

    Bending behavior of zinc-coated hot stamping steels

    Hofer, C., Stadler, M., Kurz, T., Maier-Kiener, V., Mayerhofer, A., Hebesberger, T. & Schnitzer, R., Oct 2021, In: Steel research international. 92, 10, p. 1-9 2100149.

    Research output: Contribution to journal › Article › Research › peer-review

  40. Published

    Influence of Microalloying Elements and Deformation Parameters on the Recrystallization and Precipitation Behavior of Two Low-Alloyed Steels

    Monschein, S., Kapp, M., Zügner, D., Fasching, J., Landefeld, A. & Schnitzer, R., Sept 2021, In: Steel research international. 92.2021, 9, 9 p., 2100065.

    Research output: Contribution to journal › Article › Research › peer-review

  41. Published

    Copper and its effects on microstructure and correlated tensile properties of super duplex stainless steels

    Ressel, G., Gsellmann, M., Brandl, D., Landefeld, A., Keplinger, A., Zhang, Z., Maier-Kiener, V. & Schnitzer, R., 21 Jul 2021, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 821, 821, p. 1-11 141544.

    Research output: Contribution to journal › Article › Research › peer-review

  42. Published

    Microstructure and Local Mechanical Properties of the Heat-Affected Zone of a Resistance Spot Welded Medium-Mn Steel

    Stadler, M., Schnitzer, R., Gruber, M., Steineder, K. & Hofer, C., 17 Jun 2021, In: Materials. 14.2021, 12, p. 1-13 13 p.

    Research output: Contribution to journal › Article › Research › peer-review

  43. E-pub ahead of print

    Influence of the Heat Input on the Dendritic Solidification Structure and the Mechanical Properties of 2.25Cr-1Mo-0.25V Submerged-Arc Weld Metal

    Schönmaier, H., Krein, R., Schmitz-Niederau, M. & Schnitzer, R., 14 Jun 2021, (E-pub ahead of print) In: Journal of Materials Engineering and Performance. 30.2021, 10, p. 7138-7151 14 p.

    Research output: Contribution to journal › Article › Research › peer-review

  44. Published

    Microstructure and mechanical properties of partially ferritic Q&P steels

    Kickinger, C., Suppan, C., Hebesberger, T., Schnitzer, R. & Hofer, C., 20 May 2021, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 815.2021, 20 May, 11 p., 141296.

    Research output: Contribution to journal › Article › Research › peer-review

  45. Published

    Atom Probe Tomography of the Oxide Layer of an Austenitic Stainless CrMnN-Steel

    Monschein, S., Schnitzer, R., Fluch, R., Turk, C. & Hofer, C., 14 May 2021, In: Practical metallography = Praktische Metallographie. 58.2021, 5, p. 264-281 18 p.

    Research output: Contribution to journal › Article › Research

  46. Published

    Improving the mechanical performance of a resistance spot welded 1200 MPa TBF steel

    Stadler, M., Schnitzer, R., Gruber, M. & Hofer, C., 1 Apr 2021, In: International journal of materials research : IJMR ; Zeitschrift für Metallkunde. 112.2021, 4, p. 262-270 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  47. Published

    Influence of partitioning parameters on the mechanical stability of austenite in a Q&P steel: A comparative in-situ study

    Ebner, S., Schnitzer, R., Maawad, E., Suppan, C. & Hofer, C., Mar 2021, In: Materialia. 15.2021, March, 10 p., 101033.

    Research output: Contribution to journal › Article › Research › peer-review

  48. Published

    マルエイジング鋼から物品を製造する方法

    シュニッツァーロナルド (Inventor) & ライトナーハラルド (Inventor), 22 Feb 2021, IPC No. C22C 38/ 50 A I, Patent No. JP2021507109, Priority date 19 Dec 2018, Priority No. WO2018EP85765

    Research output: Patent

  49. Published

    Influence of the cooling time on the microstructural evolution and mechanical performance of a double pulse resistance spot welded Medium-Mn steel

    Stadler, M., Schnitzer, R., Gruber, M., Steineder, K. & Hofer, C., 5 Feb 2021, In: Metals : open access journal . 11.2021, 2, p. 1-11 11 p., 270.

    Research output: Contribution to journal › Article › Research › peer-review

  50. Published

    Influence of thermomechanical fatigue loading conditions on the nanostructure of secondary hardening steels

    Hofinger, M., Seisenbacher, B., Landefeld, A., Ognianov, M., Turk, C., Leitner, H. & Schnitzer, R., 20 Jan 2021, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 802.2021, 20 January, 11 p., 140672.

    Research output: Contribution to journal › Article › Research › peer-review

  51. 2020
  52. Published

    METHOD FOR PRODUCING AN ARTICLE FROM A MARAGING STEEL

    Schnitzer, R. (Inventor) & Leitner, H. (Inventor), 17 Dec 2020, IPC No. C22C 38/ 50 A I, Patent No. US2020392593, Priority date 19 Dec 2018, Priority No. WO2018EP85765

    Research output: Patent

  53. Published

    Diffusion Bonding of High-Alloyed Tool Steels with Maraging and Precipitation Hardening Steels

    Göbl, M., Eder, H., Prestl, A., Siller, I. & Schnitzer, R., 2 Dec 2020, In: Metals : open access journal . 10, 12, p. 1-11 11 p., 1622.

    Research output: Contribution to journal › Article › Research › peer-review

  54. Published

    VERFAHREN ZUM HERSTELLEN EINES GEGENSTANDS AUS EINEM MARAGING-STAHL

    Schnitzer, R. (Inventor) & Leitner, H. (Inventor), 28 Oct 2020, IPC No. C22C 38/ 50 A I, Patent No. EP3728674, Priority date 19 Dec 2018, Priority No. WO2018EP85765

    Research output: Patent

  55. E-pub ahead of print

    Defects in a laser powder bed fused tool steel

    Platl, J., Leitner, H., Turk, C., Demir, A. G., Previtali, B. & Schnitzer, R., 13 Oct 2020, (E-pub ahead of print) In: Advanced engineering materials. 2020, 2000833, 11 p., 2000833 .

    Research output: Contribution to journal › Article › Research › peer-review

  56. Published

    Study on inclusion evolution through Si/Mn deoxidation in medium-carbon steels

    Kirchheimer, K., Schnitzer, R., Klösch, G., Fasching, J., Bernhard, C. & Michelic, S., 3 Sept 2020, Proceedings of the Iron and Steel Technology Conference, AISTech 2020. p. 1491-1502 12 p. (AISTech - Iron and Steel Technology Conference Proceedings; vol. 2).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  57. Published

    Continuous Cooling Transformation Diagrams of 2.25Cr-1Mo-0.25V Submerged-Arc Weld Metal and Base Metal

    Schönmaier, H., Loder, B., Fischer, T., Grimm, F., Krein, R., Schmitz-Niederau, M. & Schnitzer, R., Aug 2020, In: Metals : open access journal . 10, 8, p. 1-19 19 p., 1055.

    Research output: Contribution to journal › Article › Research › peer-review

  58. E-pub ahead of print

    The role of Ti and TiC nanoprecipitates in radiation resistant austenitic steel: A nanoscale study

    Cautaerts, N., Deville, R., Stergar, E., Pakarinen, J., Verwerft, M., Yang, Y., Hofer, C., Schnitzer, R., Lamm, S., Felfer, P. & Schryvers, D., 10 Jul 2020, (E-pub ahead of print) In: Acta materialia. 197.2020, 15 September, p. 184-197 14 p.

    Research output: Contribution to journal › Article › Research › peer-review

  59. Published

    Determination of Martensite Start Temperature of High‐Speed Steels Based on Thermodynamic Calculations

    Platl, J., Leitner, H., Turk, C. & Schnitzer, R., 27 May 2020, In: Steel research international. 91.2020, 8, 8 p., 2000063.

    Research output: Contribution to journal › Article › Research › peer-review

  60. E-pub ahead of print

    Characterization of carbides in Q&P steels using a combination of high-resolution methods

    Ebner, S., Schnitzer, R., Suppan, C., Stark, A., Liu, H. & Hofer, C., 2 Mar 2020, (E-pub ahead of print) In: Materials characterization. 163.2020, May, 11 p., 110242.

    Research output: Contribution to journal › Article › Research › peer-review

  61. Published

    Microstructural characterization of a double pulse resistance spot welded 1200 Mpa TBF steel

    Stadler, M., Gruber, M., Schnitzer, R. & Hofer, C., 1 Feb 2020, In: Welding in the world. 64.2020, 2, p. 335-343 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  62. E-pub ahead of print

    Precipitation reactions in a Cu-Ni-Al medium carbon alloyed dual hardening steel

    Hofinger, M., Turk, C., Ognianov, M., Leitner, H. & Schnitzer, R., 9 Jan 2020, (E-pub ahead of print) In: Materials characterization. 160.2020, February, 9 p., 110126.

    Research output: Contribution to journal › Review article › peer-review

  63. Published

    Etching methods for the microstructural characterization of a heat resistant 2.25Cr-1Mo-0.25V weld metal

    Schönmaier, H., Pölzgutter, M. & Schnitzer, R., 7 Jan 2020, In: Practical metallography = Praktische Metallographie. 57.2020, 1, p. 5-30 26 p.

    Research output: Contribution to journal › Article › Research › peer-review

  64. Published

    Defect and microstructure characterization of laser powder bed fused tool steels

    Platl, J., Schnitzer, R., Leitner, H. & Turk, C., 2020, Proceedings of Metal Additive Manufacturing Conference 2020.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  65. 2019
  66. E-pub ahead of print

    Microstructural evolution of 2.25Cr-1Mo-0.25V submerged-arc weld metal

    Schönmaier, H., Grimm, F., Krein, R., Kirchheimer, K. & Schnitzer, R., 14 Dec 2019, (E-pub ahead of print) In: Welding in the world. 64.2020, 2, p. 379-393 15 p.

    Research output: Contribution to journal › Article › Research › peer-review

  67. Published

    Thermomechanical fatigue testing of dual hardening tool steels

    Hofinger, M., Seisenbacher, B., Ognianov, M., Leitner, H., Turk, C., Kapp, M. & Schnitzer, R., 19 Nov 2019, In: Steel research international. p. 1-9

    Research output: Contribution to journal › Article › Research › peer-review

  68. Published

    Early Stages of Precipitate Formation in a Dual Hardening Steel * Frühe Stadien der Ausscheidungsbildung eines dualhärtenden Stahls

    Hofinger, M., Ognianov, M., Turk, C., Leitner, H. & Schnitzer, R., 31 Oct 2019, In: HTM - journal of heat treatment and materials . 74.2019, 5, p. 293-301 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  69. Published

    Influence of quenching conditions on texture and mechanical properties of ultra-high strength steels

    Esterl, R., Sonnleitner, M., Weißensteiner, I., Hartl, K. & Schnitzer, R., 5 Jul 2019, In: Journal of materials science. 54.2019, 19, p. 12875-12886 12 p.

    Research output: Contribution to journal › Article › Research › peer-review

  70. Published

    Verfahren zum Herstellen eines Gegenstands aus einem Maraging-Stahl

    Schnitzer, R. (Inventor) & Leitner, H. (Inventor), 27 Jun 2019, IPC No. C22C 38/ 50 A I, Patent No. DE102017131219, Priority date 22 Dec 2017, Priority No. DE201710131219

    Research output: Patent

  71. Published

    VERFAHREN ZUM HERSTELLEN EINES GEGENSTANDS AUS EINEM MARAGING-STAHL

    Schnitzer, R. (Inventor) & Leitner, H. (Inventor), 27 Jun 2019, IPC No. C22C 38/ 50 A I, Patent No. WO2019121866, Priority date 22 Dec 2017, Priority No. DE201710131219

    Research output: Patent

  72. Published

    Formation of "carbide-free zones" resulting from the interplay of C redistribution and carbide precipitation during bainitic transformation

    Klein, T., Hofer, C., Lukas, M., Wojcik, T., Schnitzer, R., Galler, M. & Ressel, G., 23 Jun 2019, In: Materialia. 7.2019, September, 100380.

    Research output: Contribution to journal › Article › Research › peer-review

  73. Published

    Influences of Thermomechanical Treatment and Nb Micro-alloying on the Hardenability of Ultra-High Strength Steels

    Esterl, R., Sonnleitner, M. & Schnitzer, R., 29 Apr 2019, In: Metallurgical and materials transactions. A, Physical metallurgy and materials science . 50.2019, 7, p. 3238 - 3245 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  74. Published

    Microstructural Analysis of the Recrystallization Behavior of Low Alloyed Steels

    Esterl, R., Sonnleitner, M. & Schnitzer, R., 1 Mar 2019, In: Steel research international. 90.2019, 3, 10 p., 1800500.

    Research output: Contribution to journal › Article › Research › peer-review

  75. Published

    Microstructural evolution of a dual hardening steel during heat treatment

    Hofinger, M., Staudacher, M., Ognianov, M., Turk, C., Leitner, H. & Schnitzer, R., 10 Feb 2019, In: Micron. 120.2019, May, p. 48-56 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  76. Published

    Austenite decomposition and carbon partitioning during quenching and partitioning heat treatments studied via in-situ X-ray diffraction

    Ebner, S., Suppan, C., Stark, A., Schnitzer, R. & Hofer, C., 2019, In: Materials and Design. 178.2019, September, 107862.

    Research output: Contribution to journal › Article › Research › peer-review

  77. Published

    Frühere Stadien der Ausscheidungsbildung eines dualhärtenden Stahls

    Hofinger, M., Ognianov, M., Turk, C., Leitner, H. & Schnitzer, R., 2019, ASMET Werkstofftechniktagung 2019 & 31. Härtereitagung. p. 102-106

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  78. Published

    Influence of V and Nb Micro-Alloying on Direct Quenched and Tempered Ultra-High Strength Steels

    Esterl, R., Schnitzer, R., Sonnleitner, M. & Gschöpf, B., 2019, In: Steel research international. 90.2019, 9 p., 800640.

    Research output: Contribution to journal › Article › Research › peer-review

  79. Published

    Thermo-mechanical fatigue testing of dual hardening tool steels

    Hofinger, M., Seisenbacher, B., Ognianov, M., Leitner, H., Turk, C., Kapp, M. & Schnitzer, R., 2019.

    Research output: Contribution to conference › Abstract

  80. 2018
  81. Published

    Influence of inhomogeneity on several length scales on the local mechanical properties in V-alloyed all-weld metal

    Haslberger, P., Ernst, W., Schneider, C., Holly, S. & Schnitzer, R., 13 Aug 2018, In: Welding in the world. 62.2018, 6, p. 1153-1158 6 p.

    Research output: Contribution to journal › Article › Research › peer-review

  82. E-pub ahead of print

    Microstructure and mechanical properties of a low C steel subjected to bainitic of quenching and partitioning heat treatments

    Ebner, S., Suppan, H., Schnitzer, R. & Hofer, C., 10 Aug 2018, (E-pub ahead of print) In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 735.2018, 26 September, 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  83. Published

    Precipitates in microalloyed ultra-high strength weld metal studied by atom probe tomography

    Haslberger, P., Holly, S., Ernst, W. & Schnitzer, R., 3 Apr 2018, In: Welding in the world. 62.2018, June, p. 713-719 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  84. Published

    Development of high-strength welding consumables using calculations and microstructural characterisation

    Holly, S., Haslberger, P., Zügner, D., Schnitzer, R. & Kozeschnik, E., 14 Feb 2018, In: Welding in the world. 62.2018, 3, p. 451-458 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  85. Published

    Microstructure and mechanical properties of high-strength steel welding consumables with a minimum yield strength of 1100 MPa

    Haslberger, P., Holly, S., Ernst, W. & Schnitzer, R., 24 Jan 2018, In: Journal of materials science. 53.2018, May, p. 6968-6979 12 p.

    Research output: Contribution to journal › Article › Research › peer-review

  86. Published

    A high-resolution sight on the compositional differences of proeutectoid- and pearlitic cementite

    Landefeld, A. & Schnitzer, R., 2018.

    Research output: Contribution to conference › Poster › Research

  87. Published

    Computational Analysis of the yield stress of ultra-high strength all-weld metals

    Zügner, D., Holly, S., Ernst, W., Schnitzer, R. & Kozeschnik, E., 2018, 12th International Seminar on Numerical Analysis of Weldability.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  88. Published

    Correlation of heat treatment parameters, microstructure and mechanical properties of 3rd generation AHSS

    Ebner, S., Suppan, C., Schnitzer, R. & Hofer, C., 2018.

    Research output: Contribution to conference › Poster › Research

  89. Published

    Microstructural Characterization of Ultra-High Strength Martensitic Steels

    Esterl, R., Sonnleitner, M., Stadler, M., Wölger, G. & Schnitzer, R., 2018, In: Practical metallography = Praktische Metallographie. 55.2018, 4, p. 203-222 20 p.

    Research output: Contribution to journal › Article › Research › peer-review

  90. Published

    Multi-Scale Microstructural Characterization: The Role of Classic and High-Resolution Metallography in the Developement of Modern High-Performance Materials

    Schnitzer, R., Hofer, C., Mayer, S., Panzenböck, M., Holec, D. & Clemens, H., 2018, In: Practical metallography = Praktische Metallographie. 55.2018, 9, p. 584-602 19 p.

    Research output: Contribution to journal › Article › Research › peer-review

  91. Published

    Skalenübergreifende Gefügechatakterisierung - Die Rolle der klassischen und hochauflösenden Metallographie bei der Entwicklung moderner Hochleistungswerkstoffe

    Schnitzer, R., Hofer, C., Mayer, S., Panzenböck, M., Holec, D. & Clemens, H., 2018, Praktische Metallographie Sonderband: Fortschritte in der Metallographie. 1 ed. Vol. 52. p. 23-34

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  92. 2017
  93. Published

    Microstructural Characterization of Martensitic All-Weld Metal Samples

    Haslberger, P., Holly, S., Ernst, W. & Schnitzer, R., 31 Jul 2017, In: Practical metallography = Praktische Metallographie. 54.2017, 8, p. 513-532 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  94. Published

    Metallurgical approach for the development of a hot crack-resistant metal-cored wire

    Holly, S., Schnitzer, R., Posch, G., Bruckner, J. & Presoly, P., 2 Mar 2017, In: Welding in the world. 61.2017, May, p. 423-434 12 p.

    Research output: Contribution to journal › Article › Research › peer-review

  95. E-pub ahead of print

    Influence of alloying elements on the mechanical properties of high-strength weld metal

    Schnitzer, R., Zügner, D., Haslberger, P., Ernst, W. & Kozeschnik, E., 12 Jan 2017, (E-pub ahead of print) In: Science and Technology of Welding and Joining. 22.2017, 6, p. 536–543 14 p.

    Research output: Contribution to journal › Article › Research › peer-review

  96. Published

    Influence of Heat Treatment on Microstructure Stability and Mechanical Properties of a Carbide-Free Bainitic Steel

    Hofer, C., Primig, S., Clemens, H., Winkelhofer, F. & Schnitzer, R., 7 Jan 2017, In: Advanced engineering materials. 19.2017, 4, 5 p., 1600658.

    Research output: Contribution to journal › Article › Research › peer-review

  97. Published

    Application of Photons and Neutrons for the Characterization and Development of Advanced Steels

    Eidenberger-Schober, E., Schnitzer, R., Zickler, G., Eidenberger-Schober, M., Bischof, M., Staron, P., Leitner, H., Schreyer, A. & Clemens, H., 2017, Neutrons and Synchrotron Radiation in Engineering Materials Science : From Fundamentals to Applications. 2 ed. Wiley-VCH , p. 377-394

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  98. Published

    Atom probe study of prior austenite grain bounda-ries of zinc-coated press hardened steel

    Hofer, C., Kurz, T., Clemens, H. & Schnitzer, R., 2017, 2017 CHS2 Conference Proceedings. p. 383-390

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  99. Published

    Effect of tempering time on the mechanical properties of P91 flux cored wire weld metal

    Baumgartner, S., Holy, A., Schuler, M., Schnitzer, R. & Enzinger, N., 2017, In: Welding in the world. 61.2017, January, p. 11-19 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  100. Published

    High resolution imaging of martensitic all-weld metal

    Haslberger, P., Ernst, W. & Schnitzer, R., 2017, In: Science and Technology of Welding and Joining. 22.2017, 4, p. 336-342 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  101. Published

    Welding of S960MC with undermatching filler material

    Schneider, C., Ernst, W., Schnitzer, R., Staufer, H., Vallant, R. & Enzinger, N., 2017, Proceeding 70th IIW .

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  102. 2016
  103. Published

    Influence of alloying elements on the mechanical properties of ultra-high strength weld metal

    Schnitzer, R., Zügner, D., Haslberger, P., Ernst, W. & Kozeschnik, E., 12 Jul 2016.

    Research output: Contribution to conference › Presentation › Research

  104. Published

    Metallurgical approach of development of a hot crack resistant metal-cored wire

    Stein, H., Schnitzer, R., Posch, G., Bruckner, J. & Presoly, P., Jul 2016.

    Research output: Contribution to conference › Presentation › Research

  105. Published

    Development of the strongest welding consumables

    Schnitzer, R., Zügner, D., Haslberger, P., Holly, S., Ernst, W. & Enzinger, N., 1 Jun 2016, p. 1-28. 28 p.

    Research output: Contribution to conference › Presentation › Research

  106. Published

    Mikrostrukturielle Charakterisierung von ultra-hochfesten Schweißgütern

    Haslberger, P., Ernst, W. & Schnitzer, R., 10 May 2016.

    Research output: Contribution to conference › Presentation › Research

  107. Published

    Influence of alloying elements on the mechanical properties of ultra-high strength weld metal 

    Schnitzer, R., Zügner, D., Haslberger, P., Ernst, W. & Kozeschnnik, E., 1 Mar 2016.

    Research output: Contribution to conference › Presentation › Research

  108. Published

    Austenitic stainless steel bismuth-free flux-cored wires for high-temperature applications

    Westin, E. M., Schnitzer, R., Ciccomascolo, F., Maderthoner, A. & Grönlund, K., 2016, In: Welding in the world. 60, 6, p. 1147-1158 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  109. Published

    Creep Rupture Strength of Dissimilar CB2-P92 FCW Joint Welds

    Baumgartner, S., Pahr, H. & Schnitzer, R., 2016, Advances in Materials Technoloy for Fossil Power Plants: Proceedings from the Eighth International Conference Oct 11-14, 2016, Albufeira, Algarve, Portugal. p. 952-962 11 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  110. Published

    High resolution imaging of martensitic all-weld metal

    Haslberger, P., Ernst, W. & Schnitzer, R., 2016.

    Research output: Contribution to conference › Presentation › Research

  111. Published

    Microstructural characterization of ultra-high strength steel welds by means of Light Optical Microscopy and Electron Backscatter Diffraction

    Haslberger, P., Weißensteiner, I., Clemens, H., Ernst, W. & Schnitzer, R., 2016.

    Research output: Contribution to conference › Poster › Research

  112. Published

    Mikrostrukturielle Charakterisierung von ultra-hochfesten Schweißgütern

    Haslberger, P., Ernst, W. & Schnitzer, R., 2016, In: Berg- und hüttenmännische Monatshefte : BHM. 161, 7, p. 321-324 4 p.

    Research output: Contribution to journal › Article › Research › peer-review

  113. 2013
  114. Published

    Comprehensive Investigations of new Filler Materials for Welding of High Strength Steels

    Schnitzer, R., Rauch, R., Ernst, W., Wagner, J., Baumgartner, S., Leitner, M., Stoschka, M., Schlagradl, T., Schneider, R. & Bernhard, C., 2013, Proceedings of the 3rd International Conference. p. 323-332

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  115. Published

    Effect of titanium on the solidification and postsolidification microstructure of high-strength steel welds

    Vanovsek, W., Bernhard, C., Fiedler, M. & Schnitzer, R., 2013, In: Welding in the world. 57, p. 665-674

    Research output: Contribution to journal › Article › Research › peer-review

  116. 2012
  117. Published

    Effect of titanium on the solidification and post-solidification microstructure of high-strength steel welds: IIW Doc. II-C-435-11

    Vanovsek, W., Bernhard, C., Fiedler, M. & Schnitzer, R., 2012

    Research output: Non-textual form › Web publication/site › Research

  118. Published

    New developed filler metals for welding of high strength steels

    Schnitzer, R., Leitner, M., Fiedler, M. & Stoschka, M., 2012, Proceedings to the 2nd International Welding and Joining Technologies Congress and 19th Technical Welding Sessions. p. 1-12

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  119. Published

    Quality testing of high-strength filler metals in regard to technical cracking – Part 1: IIW-II-C-438-11

    Stoschka, M., Leitner, M., Schnitzer, R. & Schörghuber, M., 2012

    Research output: Non-textual form › Web publication/site › Research

  120. Published

    Welding procedure for high strength welds and their microstructural evolution during solidification and cooling: IIW Doc. II-C-436-11

    Vanovsek, W., Schnitzer, R., Schlagradl, T., Schneider, R., Posch, G., Schider, S., Bernhard, C., Leitner, H., Rauch, R., Fiedler, M. & Stoschka, M., 2012

    Research output: Non-textual form › Web publication/site › Research

  121. 2011
  122. Published

    Application of Photons and Neutrons for the Characterization and Development of Advanced Steels

    Eidenberger, E., Schnitzer, R., Zickler, G., Schober, M., Bischof, M., Staron, P., Leitner, H., Schreyer, A. & Clemens, H., 2011, In: Advanced engineering materials. p. 664-673

    Research output: Contribution to journal › Article › Research › peer-review

  123. Published

    Nuovi materiali d´apporto sviluppati per i nouvi acciai ad alto snervamento della voestalpine AG

    Schnitzer, R., Posch, G., Fiedler, M., Strauß, C., Rauch, R., Fössl, T., Böck, B. & Bonalumi, P., 2011, Giornati Nazionali di Saldatura - GNS6. p. 1-8

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  124. Published

    Structure-Properties Relationship of a Stainless Maraging Steel

    Schnitzer, R., 2011, 125 p.

    Research output: Thesis › Doctoral Thesis

  125. 2010
  126. Published

    Behaviour of a maraging steel under quasi-static and dynamic compressive loading

    Lach, E., Schnitzer, R., Leitner, H., Redjaimia, A. & Clemens, H., 2010, In: International journal of microstructure and materials properties (IJMMP). 5, p. 65-78

    Research output: Contribution to journal › Article › Research › peer-review

  127. Published

    DIE AUSSCHEIDUNGSKINETIK DER NICKEL-BASIS SUPERLEGIERUNG ATI ALLVAC 718PLUS

    Zickler, G., Schnitzer, R., Radis, R., Kozeschnik, E., Schweins, R., Stockinger, M. & Leitner, H., 2010.

    Research output: Contribution to conference › Poster › Research › peer-review

  128. Published

    Effect of Cu on the evolution of precipitation in an Fe-Cr-Ni-Al-Ti maraging steel

    Schnitzer, R., Schober, M., Zinner, S. & Leitner, H., 2010, In: Acta materialia. 58, p. 3733-3741

    Research output: Contribution to journal › Article › Research › peer-review

  129. Published

    Influence of reverted austenite on static and dynamic mechanical properties of a PH 13-8 Mo maraging steel

    Schnitzer, R., Zickler, G., Erhardt, L., Clemens, H., Zinner, S., Thomas, L. & Leitner, H., 2010, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 527, p. 2065-2070

    Research output: Contribution to journal › Article › Research › peer-review

  130. Published

    Laser-Sealed Fülldraht-Fertigungstechnologie

    Posch, G., Fiedler, M., Bauer, P., Michael, B., Böck, B., Schnitzer, R., Strauss, C. & Moitzi, G., 2010, Join-Ex: Internationaler Fachkongress der Schweiß und Verbindungstechnik. p. 1-8

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  131. Published

    Modeling of the yield strength of a stainless maraging steel

    Schnitzer, R., Zinner, S. & Leitner, H., 2010, In: Scripta materialia. p. 286-289

    Research output: Contribution to journal › Article › Research › peer-review

  132. Published

    NEW SAMPLE ENVIRONMENTS FOR IN-SITU MATERIALS SCIENCE SYNCHROTRON RADIATION STUDIES

    Lippmann, T., Fischer, T., Staron, P., Zickler, G., Schnitzer, R., Martins, R. V., Stark, A., Oehring, M., Bergmann, L., dos Santos, J., Pyczak, F., Müller, M., Clemens, H. & Schreyer, A., 2010.

    Research output: Contribution to conference › Poster › Research › peer-review

  133. Published

    Reverted austenite in PH 13-8 Mo maraging steels

    Schnitzer, R., Radis, R., Nöhrer, M., Schober, M., Hochfellner, R., Zinner, S., Povoden-Karadeniz, E., Kozeschnnik, E. & Leitner, H., 2010, In: Materials chemistry and physics (including materials science communications ; an international interdisciplinary journal on science, characterization and processing of advanced materials). p. 138-145

    Research output: Contribution to journal › Article › Research › peer-review

  134. Published

    Splitting phenomenon in the precipitation evolution in an Fe-Ni-Al-Ti-Cr stainless steel

    Leitner, H., Schober, M. & Schnitzer, R., 2010, In: Acta materialia. 58, p. 1261-1269

    Research output: Contribution to journal › Article › Research › peer-review

  135. Published

    The Precipitation Behavior of Superalloy ATI Allvac 718Plus

    Zickler, G., Radis, R., Schnitzer, R., Kozeschnik, E., Stockinger, M. & Leitner, H., 2010, In: Advanced engineering materials. p. 176-183

    Research output: Contribution to journal › Article › Research › peer-review

  136. Published

    Transformation of reverted austenite in a maraging steel studied by in-situ X-ray diffrcation

    Zickler, G., Schnitzer, R., Lippmann, T. & Leitner, H., 2010.

    Research output: Contribution to conference › Poster › Research › peer-review

  137. 2009
  138. Published

    Initial Stages of Lamellae Formation in High Nb Containing gamma-TiAl Based Alloys

    Cha, L., Scheu, C., Dehm, G., Schnitzer, R. & Clemens, H., 2009, Initial Stages of Lamellae Formation in High Nb Containing gamma-TiAl Based Alloys. Materials Research Society : MRS, p. 153-158

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  139. Published

    In-situ X-ray diffraction study of the transformation of reverted austenite in the maraging steel PH 13-8 Mo

    Zickler, G., Schnitzer, R., Hochfellner, R., Lippmann, T., Zinner, S. & Leitner, H., 2009

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  140. Published

    Microstructure and mechanical properties of the superalloy ATI Allvac 718PlusTM

    Zickler, G., Schnitzer, R., Radis, R., Hochfellner, R., Schweins, R., Stockinger, M. & Leitner, H., 2009, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. p. 295-303

    Research output: Contribution to journal › Article › Research › peer-review

  141. Published

    Microstructure Evolution during Aging of two different Stainless Maraging Steels

    Schober, M., Schnitzer, R. & Leitner, H., 2009, Proceedings of the 17th IFHTSE Congress. p. 478-481

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  142. Published

    Mikrostrukturelle Charakterisierung von PH 13-8 Mo Maraging-Stählen

    Schnitzer, R., Hochfellner, R., Nöhrer, M., Schober, M., Clemens, H., Zinner, S. & Leitner, H., 2009, In: Practical metallography = Praktische Metallographie. p. 521-536

    Research output: Contribution to journal › Article › Research › peer-review

  143. Published

    New sample environments for in-situ materials science synchrotron radiation studies

    Lippmann, T., Fischer, T., Staron, P., Zickler, G., Schnitzer, R., Martins, R. V., Stark, A., Oehring, M., Bergmann, L., dos Santos, J., Pyczak, F., Müller, M., Clemens, H. & Schreyer, A., 2009.

    Research output: Contribution to conference › Poster › Research › peer-review

  144. Published

    Precipitation evolution in a Ti-free and Ti-containing stainless maraging steel

    Schober, M., Schnitzer, R. & Leitner, H., 2009, In: Ultramicroscopy. p. 553-562

    Research output: Contribution to journal › Article › Research › peer-review

  145. Published

    Reverted Austenite and its Transformation Behaviour during Deformation in a PH 13-8 Mo Maraging Steel

    Schnitzer, R., Zickler, G., Hochfellner, R., Nöhrer, M., Zinner, S. & Leitner, H., 2009, Proceedings of the 17th IFHTSE Congress. p. 462-465

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  146. Published

    Structure-Properties relationship of a PH 13-8 MO Maraging Steel

    Schnitzer, R., Zickler, G., Zinner, S. & Leitner, H., 2009, Proceedings of the 8th International Tooling Conference. p. 491-503

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  147. Published

    Struktur - Eigenschaftsbeziehungen von Maraging-Stählen

    Schnitzer, R., Zinner, S. & Leitner, H., 2009, Forum für Metallurgie und Werktstofftechnik. p. 42-44

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  148. Published

    Transformation of reverted austenite in a maraging steel under external loading: an in-situ X-ray diffraction study using high-energy synchrotron radiation

    Zickler, G., Schnitzer, R., Hochfellner, R., Lippmann, T., Zinner, S. & Leitner, H., 2009, In: International journal of materials research : IJMR ; Zeitschrift für Metallkunde. p. 1566-1573

    Research output: Contribution to journal › Article › Research › peer-review

  149. 2008
  150. Published

    In-situ high-temperature characterisation of intermetallic precipitates in a new nickel-based superalloy

    Zickler, G., Schnitzer, R., Schweins, R. & Leitner, H., 2008

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  151. Published

    In-situ high-temperature characterization of intermetallic precipitates in a new nickel-based superalloy

    Zickler, G., Schnitzer, R., Schweins, R. & Leitner, H., 2008.

    Research output: Contribution to conference › Poster › Research › peer-review

  152. Published

    Transformation of reverted austenite in a maraging steel under external loading: an in-situ X-Ray diffraction study using high-energy synchrotron radiation

    Zickler, G., Schnitzer, R., Hochfellner, R., Lippmann, T., Zinner, S. & Leitner, H., 2008.

    Research output: Contribution to conference › Poster › Research › peer-review

  153. 2007
  154. Published

    Herstellung lamellarer Gefügetypen in intermetallischen TiAl-Legierungen und deren Charakterisierung

    Schnitzer, R., Chladil, H., Scheu, C., Clemens, H., Bystrzanowski, S., Bartels, A. & Kremmer, S., 2007, In: Practical metallography = Praktische Metallographie. 44, p. 430-443

    Research output: Contribution to journal › Article › Research › peer-review

  155. 2006
  156. Published

    Charakterisierung einer hoch niobhaltigen intermetallischen Titanaluminid-Legierung

    Schnitzer, R., 2006, 93 p.

    Research output: Thesis › Diploma Thesis

  157. Published

    Gefügefeinung einer neuen, hoch niobhaltigen TiAl-Legierung durch Massivtransformation und Wärmebehandlung - Endbericht

    Scheu, C., Schnitzer, R., Chladil, H. & Clemens, H., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  158. Published

    Unterschiedliche lamellare Gefügetypen in intermetallischen TiAl-Legierungen

    Schnitzer, R., Chladil, H., Scheu, C., Clemens, H., Bystrzanowski, S., Bartels, A. & Kremmer, S., 2006, Fortschritte in der Metallographie. Werkstoff-Informationsges., p. 59-66

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  159. 2005
  160. Published

    Texture characterisation of extruded TiAl

    Chladil, H., Klauber, W. & Schnitzer, R., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

View graph of relations

Contact

Phone: 4200

Latest Research Output

View more (141)