Ralf Schledjewski

(Former)

61 - 80 out of 250Page size: 20

Research output

  1. 2019
  2. Published

    Influence of test fluids on the permeability of epoxy powder bindered non-crimp fabrics

    Tonejc, M., Ebner, C., Fauster, E. & Schledjewski, R., 1 Aug 2019, In: Advanced Manufacturing: Polymer and Composites Science. 5.2019, 3, p. 128-139 12 p.

    Research output: Contribution to journal › Article › Research › peer-review

  3. E-pub ahead of print

    Liquid composite molding reproducibility in real-world production of fiber reinforced polymeric composites: a review of challenges and solutions

    Konstantopoulos, S., Hueber, C., Antoniadis, I., Summerscales, J. & Schledjewski, R., 1 Jul 2019, (E-pub ahead of print) In: Advanced Manufacturing: Polymer and Composites Science. 5.2019, 3, p. 85-99 15 p.

    Research output: Contribution to journal › Review article › peer-review

  4. Published

    Investigation on the Influence of Pressure Terms in a Volume-Averaged Energy Balance in the Modelling of Liquid Composite Moulding Processes

    Sebastian, R. G., Obertscheider, C., Fauster, E. & Schledjewski, R., 27 Jun 2019, Key Engineering Materials. Hausmann, J. (ed.). Vol. 809. p. 480-486 7 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  5. Published

    In-plane permeability characterization of engineering textiles based on radial flow experiments: A benchmark exercise

    May, D., Aktas, A., Advani, S. G., Berg, D. C., Endruweit, A., Fauster, E., Lomov, S. V., Long, A., Mitschang, P., Abaimov, S., Abliz, D., Akhatov, I., Ali, M. A., Allen, T. D., Bickerton, S., Bodaghi, M., Caglar, B., Caglar, H., Chiminelli, A. & Correia, N. & 35 others, Cosson, B., Danzi, M., Dittmann, J., Ermanni, P., Francucci, G., George, A., Grishaev, V., Hancioglu, M., Kabachi, M. A., Kind, K., Deléglise-Lagardère, M., Laspalas, M., Lebedev, O. V., Lizaranzu, M., Liotier, P. J., Middendorf, P., Morán, J., Park, C. H., Pipes, R. B., Pucci, M. F., Raynal, J., Rodriguez, E. S., Schledjewski, R., Schubnel, R., Sharp, N., Sims, G., Sozer, E. M., Sousa, P., Thomas, J., Umer, R., Wijaya, W., Willenbacher, B., Yong, A., Zaremba, S. & Ziegmann, G., 1 Jun 2019, In: Composites Part A: Applied Science and Manufacturing. 121.2019, June, p. 100-114 15 p.

    Research output: Contribution to journal › Article › Research › peer-review

  6. Published

    Parameter selection for peel strength optimization of thermoplastic CF-PA6 for humm3TM

    Yadav, N. & Schledjewski, R., Jun 2019, p. 297-302. 6 p.

    Research output: Contribution to conference › Poster › Research › peer-review

  7. Published

    LIQUID COMPOSITE MOLDING – A BROAD RANGE OF PROCESSING TECHNIQUES BEING VERSATILE AND CHALLENGING

    Schledjewski, R., Hergan, P. & Fauster, E., 15 May 2019, Proceedings of Polymer Composites 2019.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  8. Published

    Selective comparison of heating sources for thermoplastic Automated Tape Placement

    Yadav, N. & Schledjewski, R., May 2019, Automated Composites Manufacturing (ACM4): Fourth International Symposium. Hoa, S. V. (ed.). 8 p. 1

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  9. Published

    Study on incorrect predictions for simulations of the vacuum infusion process

    Sebastian, R. G., Obertscheider, C. & Schledjewski, R., 25 Apr 2019, 28. Leobener Kunststoff-Kolloquium 2019: Schriftenreihe Kunststofftechnik Leoben. Schuecker, C. & Fuchs, P. (eds.). Vol. 9.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  10. Published

    Uncertainty propagation and sensitivity analysis in composite manufacturing cost estimation: ALPHA-framework and cost tool development

    Hueber, C., Schwingshandl, N. & Schledjewski, R., 19 Apr 2019, In: Advanced Manufacturing: Polymer and Composites Science. 5.2019, 2, p. 69 - 84 16 p.

    Research output: Contribution to journal › Article › Research › peer-review

  11. Published

    Custom OpenFOAM solver for modelling Liquid Composite Moulding processes

    Sebastian, R. G., Obertscheider, C., Fauster, E. & Schledjewski, R., 13 Mar 2019.

    Research output: Contribution to conference › Abstract

  12. Published

    Minimum invasive production-related SLS specimen manufacturing for interface characterization of hybrid materials made by RTM

    Hergan, P., Lechner, C., Fauster, E., Pilz, G. & Schledjewski, R., 15 Jan 2019, In: International Journal of Advanced Manufacturing Technology. 102.2019, 5-8, p. 1963-1972 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  13. Published

    Controlling moisture content of natural fibres in RTM-process

    Salzmann, M. & Schledjewski, R., 1 Jan 2019, 22nd Symposium on Composites. Hausmann, J. M. (ed.). Trans Tech Publications, p. 610-614 5 p. (Key Engineering Materials; vol. 809 KEM).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  14. Published

    Flash and inductive thermography for CFRP inspection

    Oswald-Tranta, B., Tuschl, C. & Schledjewski, R., 1 Jan 2019, Thermosense: Thermal Infrared Applications XLI. de Vries, J. & Oswald-Tranta, B. (eds.). SPIE, 110040L. (Proceedings of SPIE - The International Society for Optical Engineering; vol. 11004).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  15. Published

    A methodology for determining preform compaction in bladder-assisted resin transfer molding with elastomeric bladders for tubular composite parts

    Schillfahrt, C., Fauster, E. & Schledjewski, R., Jan 2019, In: International journal of material forming. 12.2019, 1, p. 1-15 15 p.

    Research output: Contribution to journal › Article › Research › peer-review

  16. Published

    Model Based Processing of Hybrid RTM Parts

    Hergan, P., Fauster, E. & Schledjewski, R., 2019.

    Research output: Contribution to conference › Paper › peer-review

  17. Published

    Untersuchung von CFK Proben mit induktiv angeregter Thermografie

    Oswald-Tranta, B., Tuschl, C. & Schledjewski, R., 2019.

    Research output: Contribution to conference › Paper › peer-review

  18. 2018
  19. E-pub ahead of print

    Production planning optimisation for composite aerospace manufacturing

    Hueber, C., Fischer, G., Schwingshandl, N. & Schledjewski, R., 20 Dec 2018, (E-pub ahead of print) In: International Journal of Production Research. 57.2019, 18, p. 5857-5873 17 p.

    Research output: Contribution to journal › Article › Research › peer-review

  20. Published

    An experimental method for characterizing unsaturated 1D flow in tubular braided preforms during bladder-assisted resin transfer molding

    Schillfahrt, C., Fauster, E. & Schledjewski, R., 1 Dec 2018, In: Polymer Composites. 39.2018, 12, p. 4666-4677 12 p.

    Research output: Contribution to journal › Article › Research › peer-review

  21. Published

    Improving degree of cure in pultrusion process by optimizing die-temperature

    Costa Dias, R. D. C., Santos, L. D. S., Ouzia, H. & Schledjewski, R., 1 Dec 2018, In: Materials Today Communications. 17.2018, December, p. 362-370 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  22. Published

    Peel strength characterisation on ply/ply interface using wedge and T-peel/pull-type tests

    Satheesh, B., Tonejc, M., Potakowskyj, L., Pletz, M., Fauster, E., Kaynak, B. & Schledjewski, R., 8 Nov 2018, In: Polymers & Polymer Composites (Polymers and polymer composites). 26.2018, 8-9, p. 431-435 5 p.

    Research output: Contribution to journal › Article › Research › peer-review

Previous 1 2 3 4 5 6 7 8 ...13 Next
View graph of relations

Latest Research Output

View more (250)