Ralf Schledjewski

(Former)

51 - 100 out of 250Page size: 50

Research output

  1. 2021
  2. Published

    Processing of Fibre-Reinforced Polymer Composites Based on Phenomenological Models

    Fauster, E., Hergan, P. & Schledjewski, R., 2021, Polymer Meeting 14: Book of Abstracts.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  3. 2020
  4. Published

    Fatigue monitoring of flax fibre reinforced epoxy composites using integrated fibre-optical FBG sensors

    Szebényi, G., Blößl, Y., Hegedüs, G., Tábi, T., Czigany, T. & Schledjewski, R., 20 Oct 2020, In: Composites science and technology. 199, 108317.

    Research output: Contribution to journal › Article › Research › peer-review

  5. Published

    A robust empirical model equation for the compaction response of textile reinforcements

    Blößl, Y. & Schledjewski, R., 1 Oct 2020, In: Polymer Composites. 42.2021, 1, p. 297-308 12 p.

    Research output: Contribution to journal › Article › Research › peer-review

  6. Published

    Applicability of fiber Bragg grating sensors for cure monitoring in resin transfer molding processes

    Blößl, Y., Hegedüs, G., Szebényi, G., Tábi, T., Schledjewski, R. & Czigany, T., 10 Sept 2020, In: Journal of Reinforced Plastics and Composites.

    Research output: Contribution to journal › Article › Research › peer-review

  7. Published

    Kinetic parameter estimation and simulation of pultrusion process of an epoxy-glass fiber system

    Costa Dias, R. D. C., Leali Costa, M., Santos, L. D. S. & Schledjewski, R., 22 Jun 2020, In: Thermochimica Acta. 690.2020, August, 12 p., 178636.

    Research output: Contribution to journal › Article › Research › peer-review

  8. Published

    Reliable and Sustainable composite production for Biobased Components (RSBC) Verarbeitung und Prozessmonitoring

    Schledjewski, R., Blößl, Y. & Salzmann, M., 18 Feb 2020.

    Research output: Contribution to conference › Poster › Transfer

  9. E-pub ahead of print

    Flow-speed-controlled quality optimisation for one-shot-hybrid RTM parts

    Hergan, P., Fauster, E., Perkonigg, D., Pinter, G. & Schledjewski, R., 11 Feb 2020, (E-pub ahead of print) In: Advanced Manufacturing: Polymer and Composites Science. 6.2020, 1, p. 29-37 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  10. Published

    Elliptic paraboloid flow front modelling for in-plane permeability characterization of textile fabrics by the radial flow technique

    Fauster, E., Berg, D. C., May, D., Endruweit, A., Blößl, Y. & Schledjewski, R., 2020, ECCM 2018 - 18th European Conference on Composite Materials. (ECCM 2018 - 18th European Conference on Composite Materials).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  11. Published

    Online thermography inspection for automated tape layup

    Yadav, N., Oswald-Tranta, B., Schledjewski, R. & Habicher, M., 2020, Thermosense: Thermal Infrared Applications XLII. Oswald-Tranta, B. & Zalameda, J. N. (eds.). SPIE, Vol. 11409. 114090H. (Proceedings of SPIE).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  12. 2019
  13. Published

    SAFE AND EFFICIENT HEATING – HOW TO IDENTIFY THE BEST PERFORMING HEATING METHOD FOR THERMOPLASTIC TAPE PLACEMENT

    Schledjewski, R. & Yadav, N., 17 Sept 2019, Proceedings SAMPE Europe Conference 2019 Nantes.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  14. Published

    Influence of test fluids on the permeability of epoxy powder bindered non-crimp fabrics

    Tonejc, M., Ebner, C., Fauster, E. & Schledjewski, R., 1 Aug 2019, In: Advanced Manufacturing: Polymer and Composites Science. 5.2019, 3, p. 128-139 12 p.

    Research output: Contribution to journal › Article › Research › peer-review

  15. E-pub ahead of print

    Liquid composite molding reproducibility in real-world production of fiber reinforced polymeric composites: a review of challenges and solutions

    Konstantopoulos, S., Hueber, C., Antoniadis, I., Summerscales, J. & Schledjewski, R., 1 Jul 2019, (E-pub ahead of print) In: Advanced Manufacturing: Polymer and Composites Science. 5.2019, 3, p. 85-99 15 p.

    Research output: Contribution to journal › Review article › peer-review

  16. Published

    Investigation on the Influence of Pressure Terms in a Volume-Averaged Energy Balance in the Modelling of Liquid Composite Moulding Processes

    Sebastian, R. G., Obertscheider, C., Fauster, E. & Schledjewski, R., 27 Jun 2019, Key Engineering Materials. Hausmann, J. (ed.). Vol. 809. p. 480-486 7 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  17. Published

    In-plane permeability characterization of engineering textiles based on radial flow experiments: A benchmark exercise

    May, D., Aktas, A., Advani, S. G., Berg, D. C., Endruweit, A., Fauster, E., Lomov, S. V., Long, A., Mitschang, P., Abaimov, S., Abliz, D., Akhatov, I., Ali, M. A., Allen, T. D., Bickerton, S., Bodaghi, M., Caglar, B., Caglar, H., Chiminelli, A. & Correia, N. & 35 others, Cosson, B., Danzi, M., Dittmann, J., Ermanni, P., Francucci, G., George, A., Grishaev, V., Hancioglu, M., Kabachi, M. A., Kind, K., Deléglise-Lagardère, M., Laspalas, M., Lebedev, O. V., Lizaranzu, M., Liotier, P. J., Middendorf, P., Morán, J., Park, C. H., Pipes, R. B., Pucci, M. F., Raynal, J., Rodriguez, E. S., Schledjewski, R., Schubnel, R., Sharp, N., Sims, G., Sozer, E. M., Sousa, P., Thomas, J., Umer, R., Wijaya, W., Willenbacher, B., Yong, A., Zaremba, S. & Ziegmann, G., 1 Jun 2019, In: Composites Part A: Applied Science and Manufacturing. 121.2019, June, p. 100-114 15 p.

    Research output: Contribution to journal › Article › Research › peer-review

  18. Published

    Parameter selection for peel strength optimization of thermoplastic CF-PA6 for humm3TM

    Yadav, N. & Schledjewski, R., Jun 2019, p. 297-302. 6 p.

    Research output: Contribution to conference › Poster › Research › peer-review

  19. Published

    LIQUID COMPOSITE MOLDING – A BROAD RANGE OF PROCESSING TECHNIQUES BEING VERSATILE AND CHALLENGING

    Schledjewski, R., Hergan, P. & Fauster, E., 15 May 2019, Proceedings of Polymer Composites 2019.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  20. Published

    Selective comparison of heating sources for thermoplastic Automated Tape Placement

    Yadav, N. & Schledjewski, R., May 2019, Automated Composites Manufacturing (ACM4): Fourth International Symposium. Hoa, S. V. (ed.). 8 p. 1

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  21. Published

    Study on incorrect predictions for simulations of the vacuum infusion process

    Sebastian, R. G., Obertscheider, C. & Schledjewski, R., 25 Apr 2019, 28. Leobener Kunststoff-Kolloquium 2019: Schriftenreihe Kunststofftechnik Leoben. Schuecker, C. & Fuchs, P. (eds.). Vol. 9.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  22. Published

    Uncertainty propagation and sensitivity analysis in composite manufacturing cost estimation: ALPHA-framework and cost tool development

    Hueber, C., Schwingshandl, N. & Schledjewski, R., 19 Apr 2019, In: Advanced Manufacturing: Polymer and Composites Science. 5.2019, 2, p. 69 - 84 16 p.

    Research output: Contribution to journal › Article › Research › peer-review

  23. Published

    Custom OpenFOAM solver for modelling Liquid Composite Moulding processes

    Sebastian, R. G., Obertscheider, C., Fauster, E. & Schledjewski, R., 13 Mar 2019.

    Research output: Contribution to conference › Abstract

  24. Published

    Minimum invasive production-related SLS specimen manufacturing for interface characterization of hybrid materials made by RTM

    Hergan, P., Lechner, C., Fauster, E., Pilz, G. & Schledjewski, R., 15 Jan 2019, In: International Journal of Advanced Manufacturing Technology. 102.2019, 5-8, p. 1963-1972 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  25. Published

    Controlling moisture content of natural fibres in RTM-process

    Salzmann, M. & Schledjewski, R., 1 Jan 2019, 22nd Symposium on Composites. Hausmann, J. M. (ed.). Trans Tech Publications, p. 610-614 5 p. (Key Engineering Materials; vol. 809 KEM).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  26. Published

    Flash and inductive thermography for CFRP inspection

    Oswald-Tranta, B., Tuschl, C. & Schledjewski, R., 1 Jan 2019, Thermosense: Thermal Infrared Applications XLI. de Vries, J. & Oswald-Tranta, B. (eds.). SPIE, 110040L. (Proceedings of SPIE - The International Society for Optical Engineering; vol. 11004).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  27. Published

    A methodology for determining preform compaction in bladder-assisted resin transfer molding with elastomeric bladders for tubular composite parts

    Schillfahrt, C., Fauster, E. & Schledjewski, R., Jan 2019, In: International journal of material forming. 12.2019, 1, p. 1-15 15 p.

    Research output: Contribution to journal › Article › Research › peer-review

  28. Published

    Model Based Processing of Hybrid RTM Parts

    Hergan, P., Fauster, E. & Schledjewski, R., 2019.

    Research output: Contribution to conference › Paper › peer-review

  29. Published

    Untersuchung von CFK Proben mit induktiv angeregter Thermografie

    Oswald-Tranta, B., Tuschl, C. & Schledjewski, R., 2019.

    Research output: Contribution to conference › Paper › peer-review

  30. 2018
  31. E-pub ahead of print

    Production planning optimisation for composite aerospace manufacturing

    Hueber, C., Fischer, G., Schwingshandl, N. & Schledjewski, R., 20 Dec 2018, (E-pub ahead of print) In: International Journal of Production Research. 57.2019, 18, p. 5857-5873 17 p.

    Research output: Contribution to journal › Article › Research › peer-review

  32. Published

    An experimental method for characterizing unsaturated 1D flow in tubular braided preforms during bladder-assisted resin transfer molding

    Schillfahrt, C., Fauster, E. & Schledjewski, R., 1 Dec 2018, In: Polymer Composites. 39.2018, 12, p. 4666-4677 12 p.

    Research output: Contribution to journal › Article › Research › peer-review

  33. Published

    Improving degree of cure in pultrusion process by optimizing die-temperature

    Costa Dias, R. D. C., Santos, L. D. S., Ouzia, H. & Schledjewski, R., 1 Dec 2018, In: Materials Today Communications. 17.2018, December, p. 362-370 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  34. Published

    Peel strength characterisation on ply/ply interface using wedge and T-peel/pull-type tests

    Satheesh, B., Tonejc, M., Potakowskyj, L., Pletz, M., Fauster, E., Kaynak, B. & Schledjewski, R., 8 Nov 2018, In: Polymers & Polymer Composites (Polymers and polymer composites). 26.2018, 8-9, p. 431-435 5 p.

    Research output: Contribution to journal › Article › Research › peer-review

  35. Published

    Path calculation, technology and opportunities in dry fiber winding: a review

    Sofi, T., Neunkirchen, S. & Schledjewski, R., 10 Oct 2018, In: Advanced Manufacturing: Polymer and Composites Science. 4.2018, 3, p. 57-72 16 p.

    Research output: Contribution to journal › Review article › peer-review

  36. Published

    Application of vibrating vents to control void content of RTM parts

    Hergan, P., Fauster, E. & Schledjewski, R., Jul 2018, Proceedings of SAMPE Europe Conference 2018. 7 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  37. Published

    Winding Trajectories for Dry Filament Wound Preforms

    Sofi, T. R. & Schledjewski, R., 28 Jun 2018.

    Research output: Contribution to conference › Paper

  38. Published

    Natural fibre textile characterization for dual-scale flow prediction

    Blößl, Y. & Schledjewski, R., 25 Jun 2018.

    Research output: Contribution to conference › Poster › Research › peer-review

  39. Published

    Inline control of tape width during automated tape placement

    Schledjewski, R., 24 Jun 2018, Proceedings of the 18th European Conference on Composite Materials.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  40. Published

    NATURAL FIBRE TEXTILE CHARACTERIZATION FOR DUAL-SCALE FLOW PREDICTION

    Blößl, Y. & Schledjewski, R., 24 Jun 2018, Proceedings of the 18th European Conference on Composite Materials.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  41. Published

    Image processing and data evaluation algorithms for reproducible optical in-plane permeability characterization by radial flow experiments

    Fauster, E., Berg, D. C., Abliz, D., Grössing, H., Meiners, D., Ziegmann, G. & Schledjewski, R., 17 Jun 2018, In: Journal of composite materials. 53.2019, 1, p. 45-63 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  42. Published

    Using (VA)RTM with a Rigid Mould to Produce Fibre Metal Laminates with Proven Impact Strength

    Hergan, P., Li, Y., Zaloznik, L., Kaynak, B., Arbeiter, F., Fauster, E. & Schledjewski, R., 11 Jun 2018, In: Journal of Manufacturing and Materials Processing. 2.2018, 2, 12 p., 38.

    Research output: Contribution to journal › Article › Research › peer-review

  43. Published

    Analysis of the spontaneous, capillary driven wetting behaviour in reinforcing textile structure

    Blößl, Y. & Schledjewski, R., 30 May 2018, PROCEEDINGS OF THE 14TH INTERNATIONAL CONFERENCE ON FLOW PROCESSING IN COMPOSITE MATERIALS.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  44. Published

    Forming of complex-shaped composite tubes using optimized bladder-assisted resin transfer molding

    Schillfahrt, C., Fauster, E. & Schledjewski, R., 2 May 2018, Proceedings of the 21st International ESAFORM Conference on Material Forming, ESAFORM 2018. Vol. 1960. 020027

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  45. Published

    A built-in sensor with carbon nanotubes coated by Ag clusters for deformation monitoring of glass fibre/epoxy composites

    Slobodian, P., Riha, P., Matyas, J., Olejnik, R., Lloret Pertegás, S., Schledjewski, R. & Kovar, M., 5 Apr 2018, In: Journal of Physics: Conference Series. 987, 1, 012017.

    Research output: Contribution to journal › Conference article › peer-review

  46. E-pub ahead of print

    Robust evaluation of flow front data for in-plane permeability characterization by radial flow experiments

    Fauster, E., Berg, D. C., May, D., Blößl, Y. & Schledjewski, R., 5 Mar 2018, (E-pub ahead of print) In: Advanced Manufacturing: Polymer and Composites Science. 4.2018, 1, p. 24-40 17 p.

    Research output: Contribution to journal › Article › Research › peer-review

  47. Published

    Influence of processing parameters on quality factors of one-shot hybrid structures made by RTM

    Hergan, P., Beter, J., Stelzer, S., Fauster, E. & Schledjewski, R., 21 Feb 2018, In: Production Engineering : research and development. 12.2018, 2, p. 185-194 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  48. Published

    Automated thermoplastic tape placement – Is there a missing link to reach industrialization?

    Schledjewski, R., 2018, Proceedings of SAMPE Europe Conference 2018.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  49. Published

    Determination of the friction coefficient in dry-fiber filament winding

    Neunkirchen, S. & Schledjewski, R., 2018, Proceedings of the 18th European Conference on Composite Materials.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  50. Published

    Determination of the unsaturated through-thickness permeability of fibrous preforms based on flow front detection by ultrasound

    Konstantopoulos, S., Grössing, H., Hergan, P. & Schledjewski, R., 2018, In: Polymer Composites. 39.2018, 2, p. 360-367 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  51. Published

    Experimental Process Pressure Analysis for Model-Based Manufacturing of Composites by Resin Transfer Moulding

    Fauster, E., Thirunavukkarasu, J., Hergan, P. & Schledjewski, R., 2018, IOP Conference Series: Materials Science and Engineering.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  52. Accepted/In press

    POLYNOMIAL SURFACE MODELLING OF FLOW FRONT DATA FOR IN-PLANE PERMEABILITY CHARACTERIZATION OF TEXTILE FABRICS BY RADIAL FLOW EXPERIMENTS

    Fauster, E., Berg, D. C., May, D., Blößl, Y. & Schledjewski, R., 2018, (Accepted/In press).

    Research output: Contribution to conference › Paper › peer-review

  53. Published

    Quality controlled manufacturing of Hybrid-Metal CRFP Composites by Resin Transfer Moulding

    Fauster, E., Hergan, P. & Schledjewski, R., 2018, Proceedings ICMAC 2018.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  54. 2017
  55. Published

    Glass fiber/epoxy composites with integrated layer of carbon nanotubes for deformation detection

    Slobodian, P., Lloret Pertegás, S., Riha, P., Matyas, J., Olejnik, R., Schledjewski, R. & Kovar, M., 29 Dec 2017, In: Composites science and technology. 156.2018, 1 March, p. 61-69 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

Previous 1 2 3 4 5 Next
View graph of relations

Latest Research Output

View more (250)