Michael Stoschka

1 - 100 out of 208Page size: 100

Research output

  1. 2024
  2. Published

    Investigation of fracture mechanical properties of a brass alloy with microstructural variations

    Klaushofer, M., Stoschka, M., Maier, B. & Grün, F., 25 Nov 2024, In: Engineering Fracture Mechanics. 311.2024, 25 November, 22 p., 110564.

    Research output: Contribution to journal › Article › Research › peer-review

  3. Published

    FATIGUE LIMIT ASSESSMENT OF INTERACTING SMALL DEFECTS BY CYCLIC R-CURVE ANALYSIS

    Fladischer, S., Stoschka, M. & Grun, F., 26 Aug 2024.

    Research output: Contribution to conference › Abstract › peer-review

  4. Published

    Service Strength Assessment of Macroscopic Imperfections in Cast Steel Alloys

    Stoschka, M., Horvath, M., Mössler, W. & Grun, F., 13 Jun 2024.

    Research output: Contribution to conference › Paper › peer-review

  5. 2023
  6. Published

    Effect of Surface Finishing State on Fatigue Strength of Cast Aluminium and Steel Alloys

    Oberreiter, M., Horvath, M., Stoschka, M. & Fladischer, S., 30 Jun 2023, In: Materials. 16.2023, 13, 41 p., 4755.

    Research output: Contribution to journal › Article › Research › peer-review

  7. Published

    A Numerically Efficient Method to Assess the Elastic–Plastic Strain Energy Density of Notched and Imperfective Cast Steel Components

    Horvath, M., Oberreiter, M. & Stoschka, M., 27 Apr 2023, In: Applied mechanics : open access journal. 4.2023, 2, p. 528-566 39 p.

    Research output: Contribution to journal › Article › Research › peer-review

  8. Published

    Energy-Based Fatigue Assessment of Defect-Afflicted Cast Steel Components by Means of a Linear-Elastic Approach

    Horvath, M., Oberreiter, M. & Stoschka, M., 15 Mar 2023, In: Applied Sciences : open access journal. 13.2023, 6, 23 p., 3768.

    Research output: Contribution to journal › Article › Research › peer-review

  9. Published

    Study of Local Fatigue Methods (TCD, N-SIF, and ESED) on Notches and Defects Related to Numerical Efficiency

    Stoschka, M., Horvath, M., Fladischer, S. & Oberreiter, M., 9 Feb 2023, In: Applied Sciences (Switzerland). 13.2023, 4, 41 p., 2247.

    Research output: Contribution to journal › Article › Research › peer-review

  10. Published

    Effect of local microstructure on fatigue and related failure mechanisms in AlSi-castings

    Oberreiter, M., Stoschka, M., Horvath, M. & Fladischer, S., Jan 2023.

    Research output: Contribution to conference › Paper › peer-review

  11. Published

    Fatigue life assessment of imperfective cast steel components in the medium-cycle regime by stress- and energy-based concepts

    Horvath, M., Oberreiter, M. & Stoschka, M., 2023, In: Procedia Structural Integrity. 51, p. 95-101 7 p.

    Research output: Contribution to journal › Conference article › peer-review

  12. 2022
  13. Published

    Fatigue strength study based on geometric shape of bulk defects in cast steel

    Horvath, M., Stoschka, M. & Fladischer, S., Oct 2022, In: International Journal of Fatigue. 163.2022, October, 9 p., 107082.

    Research output: Contribution to journal › Article › Research › peer-review

  14. Published

    Optimization of disc geometry and hardness distribution for better transferability of fatigue life prediction from disc to FZG tests

    Trausmuth, A., Stoschka, M. & Grün, F., 15 Jun 2022, In: Wear. 498-499.2022, 15 June, 13 p., 204329.

    Research output: Contribution to journal › Article › Research › peer-review

  15. Published

    A Probabilistic Fatigue Strength Assessment in AlSi-Cast Material by a Layer-Based Approach

    Oberreiter, M., Fladischer, S., Stoschka, M. & Leitner, M., 30 Apr 2022, In: Metals. 12.2022, 5, 22 p., 784.

    Research output: Contribution to journal › Article › Research › peer-review

  16. 2021
  17. Published

    Set-up of a Generalized Dataset for Crack-Closure-Mechanisms of Cast Steel

    Horvath, M., Oberreiter, M., Stoschka, M. & Leitner, M., 24 Nov 2021, In: Journal of Casting & Materials Engineering. 5.2021, 4, p. 84-88 5 p.

    Research output: Contribution to journal › Article › Research › peer-review

  18. Published

    Characterisation of actual weld geometry and stress concentration of butt welds exhibiting local undercuts

    Ottersböck, M. J., Leitner, M. & Stoschka, M., 1 Aug 2021, In: Engineering Structures. 240, 1 August, 18 p., 112266.

    Research output: Contribution to journal › Article › Research › peer-review

  19. Published

    Impact of microstructural properties on the crack threshold of aluminium castings

    Oberreiter, M., Aigner, R., Pomberger, S., Leitner, M. & Stoschka, M., Jan 2021, In: Engineering Fracture Mechanics. 241, 10 p., 107431.

    Research output: Contribution to journal › Article › Research › peer-review

  20. 2020
  21. Published

    Effect of load stress ratio on nominal and effective notch fatigue strength assessment of HFMI-treated high-strength steel cover plates

    Leitner, M. & Stoschka, M., 1 Oct 2020, In: International Journal of Fatigue. 139, October, 7 p., 105784.

    Research output: Contribution to journal › Article › Research › peer-review

  22. Published

    Validation of the fatigue strength assessment of HFMI-treated steel joints under variable amplitude loading

    Leitner, M., Stoschka, M., Barsoum, Z. & Farajian, M., 23 Jun 2020, In: Welding in the world. 64.2020, 10, p. 1681-1689 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  23. Published

    Validation Study on the Statistical Size Effect in Cast Aluminium

    Oberreiter, M., Pomberger, S., Leitner, M. & Stoschka, M., 27 May 2020, In: Metals : open access journal . 10.2020, 6, p. 710 22 p.

    Research output: Contribution to journal › Article › Research › peer-review

  24. Published

    Probabilistic Surface Layer Fatigue Strength Assessment of EN AC-46200 Sand Castings

    Pomberger, S., Oberreiter, M., Leitner, M., Stoschka, M. & Thuswaldner, J., 9 May 2020, In: Metals : open access journal . 10.2020, 5, p. 616 26 p., 616.

    Research output: Contribution to journal › Article › Research › peer-review

  25. Published

    Local strain energy density approach to assess the fatigue strength of sharp and blunt V-notches in cast steel

    Schuscha, M., Leitner, M., Stoschka, M. & Meneghetti, G., 1 Mar 2020, In: International Journal of Fatigue. 132.2020, March, 105334.

    Research output: Contribution to journal › Article › Research › peer-review

  26. 2019
  27. Published

    Areal fatigue strength assessment of cast aluminium surface layers

    Pomberger, S., Stoschka, M., Aigner, R., Leitner, M. & Ehart, R., 20 Dec 2019, In: International Journal of Fatigue. 133.2020, April, 11 p., 105423.

    Research output: Contribution to journal › Article › Research › peer-review

  28. Published

    Crack Initiation and Propagation Fatigue Life of Ultra High-Strength Steel Butt Joints

    Ottersböck, M., Leitner, M., Stoschka, M. & Maurer, W., 1 Nov 2019, In: Applied Sciences : open access journal. 9.2019, 21, 4590.

    Research output: Contribution to journal › Article › Research › peer-review

  29. Published

    Notch Stress Intensity Factor (NSIF)-Based Fatigue Design to Assess Cast Steel Porosity and Related Artificially Generated Imperfections

    Schuscha, M., Horvath, M., Leitner, M. & Stoschka, M., 11 Oct 2019, In: Metals : open access journal . 9.2019, 10, 28 p., 1097.

    Research output: Contribution to journal › Article › Research › peer-review

  30. Published

    On the behaviour of non-propagating cracks in steel and aluminium castings

    Schuscha, M., Aigner, R., Pomberger, S., Oberreiter, M., Leitner, M. & Stoschka, M., 17 Sept 2019, In: Engineering Fracture Mechanics. 220.2019, 15 October, 106670.

    Research output: Contribution to journal › Article › Research › peer-review

  31. Published

    Cast surface texture characterisation via areal roughness

    Pomberger, S., Stoschka, M. & Leitner, M., 12 Sept 2019, In: Precision Engineering. 60.2019, p. 465-481 17 p.

    Research output: Contribution to journal › Article › Research › peer-review

  32. Published

    On the mean stress sensitivity of cast aluminium considering imperfections

    Aigner, R., Leitner, M. & Stoschka, M., 5 Jun 2019, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 758.2019, June, p. 172-184 13 p.

    Research output: Contribution to journal › Article › Research › peer-review

  33. Published

    On the Statistical Size Effect of Cast Aluminium

    Aigner, R., Pomberger, S., Leitner, M. & Stoschka, M., 14 May 2019, In: Materials. 12.2019, 10, 19 p., 1578.

    Research output: Contribution to journal › Article › Research › peer-review

  34. Published

    Application of different simulation approaches to numerically optimize high-frequency mechanical impact (HFMI) post-treatment process

    Ernould, C., Schubnell, J., Farajian, M., Maciolek, A., Simunek, D., Leitner, M. & Stoschka, M., 1 May 2019, In: Welding in the world. 63.2019, 3, p. 725-738 14 p.

    Research output: Contribution to journal › Article › Research › peer-review

  35. Published

    Analysis of fatigue notch effect due to axial misalignment for ultra high-strength steel butt joints

    Ottersböck, M., Leitner, M., Stoschka, M. & Maurer, W., May 2019, In: Welding in the world. 63.2019, 3, p. 851-865 15 p.

    Research output: Contribution to journal › Article › Research › peer-review

  36. Published

    Evaluation of surface roughness parameters and their impact on fatigue strength of Al-Si cast material

    Pomberger, S., Leitner, M. & Stoschka, M., May 2019, In: Materials Today: Proceedings. 12.2019, 2, p. 225-234 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  37. Published

    Numerical crack growth study on porosity afflicted cast steel specimens

    Schuscha, M., Leitner, M., Stoschka, M., Pusterhofer, S. & Meneghetti, G., 1 Apr 2019, In: Frattura ed integrità strutturale. 13.2019, 48, p. 58-69 12 p.

    Research output: Contribution to journal › Article › Research › peer-review

  38. Published

    A probabilistic Kitagawa-Takahashi diagram for fatigue strength assessment of cast aluminium alloys

    Aigner, R., Pusterhofer, S., Pomberger, S., Leitner, M. & Stoschka, M., 4 Feb 2019, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 745.2019, February, p. 326-334 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  39. Published

    Application of different simulation approaches to numerically optimize high-frequency mechanical impact (HFMI) post-treatment process

    Ernould, C., Schubnell, J., Farajian, M., Maciolek, A., Simunek, D., Leitner, M. & Stoschka, M., 1 Feb 2019, In: Welding in the world. 63.2019, 1 May, p. 725-738 14 p.

    Research output: Contribution to journal › Article › Research › peer-review

  40. Published

    Fatigue design of metallic components considering bulk and surface imperfections

    Leitner, M., Schneller, W., Pusterhofer, S. & Stoschka, M., 2019, Intermediate Meeting of IIW Commission XIII: IIW Document XIII-WG4-167-19.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  41. Published

    Fatigue strength assessment of HFMI-treated steel joints under variable amplitude loading

    Leitner, M., Stoschka, M., Barsoum, Z. & Farajian, M., 2019, 72nd IIW Annual Assembly and International Conference: IIW Document XIII-2818-19.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  42. Published

    Short and long crack growth of aluminium cast alloys

    Leitner, M., Aigner, R., Pomberger, S., Stoschka, M., Garb, C. & Pusterhofer, S., 2019, Structural Integrity: Mechanical Fatigue of Metals. 7 ed. Springer, p. 139-145 7 p. (Structural Integrity; vol. 7).

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  43. 2018
  44. Published

    Application of a √ area -Approach for Fatigue Assessment of Cast Aluminum Alloys at Elevated Temperature

    Aigner, R., Garb, C., Leitner, M., Stoschka, M. & Grün, F., Dec 2018, In: Metals : open access journal . 8, 12

    Research output: Contribution to journal › Article › Research › peer-review

  45. Published

    Effect of as-cast surface layer on aluminium alloy fatigue strength

    Pomberger, S., Leitner, M. & Stoschka, M., 25 Sept 2018, 35th Danubia-Adria Symposium on Advances in Experimental Mechanics. Sinaia, Romania, p. 73-74

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  46. Published

    Application of the generalized Kitagawa diagram on cast steel

    Schuscha, M., Leitner, M., Stoschka, M. & Meneghetti, G., 21 Sept 2018, Proceedings of the 6th International Conference on Crack Paths.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  47. Published

    Short and Long Crack Growth of Aluminium Cast Alloys

    Leitner, M., Aigner, R., Pomberger, S., Stoschka, M., Garb, C. & Pusterhofer, S., 7 Sept 2018, Proceedings of the 19th International Colloquium on Mechanical Fatigue of Metals: Book of Abstracts. Porto, p. 25-26

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  48. Published

    Surface topography effects on the fatigue strength of cast aluminum alloy AlSi8Cu3

    Leitner, M., Stoschka, M., Fröschl, J. & Wiebesiek, J., 14 Jun 2018, In: Materials Performance and Characterization. 7, 2, p. 148 - 164

    Research output: Contribution to journal › Article › Research › peer-review

  49. Published

    Development of a generalized Kitagawa diagram for cast G21Mn5 steel

    Schuscha, M., Leitner, M. & Stoschka, M., 25 May 2018, In: MATEC Web of Conferences . 2018, 165, 8 p., 14010.

    Research output: Contribution to journal › Article › Research › peer-review

  50. Published

    Fatigue strength characterization of Al-Si cast material incorporating statistical size effect

    Aigner, R., Leitner, M. & Stoschka, M., 25 May 2018, In: MATEC Web of Conferences . 165, 14002.

    Research output: Contribution to journal › Conference article › peer-review

  51. Published

    Fatigue strength assessment of welded mild steel joints containing bulk imperfections

    Leitner, M., Murakami, Y., Farajian, M., Remes, H. & Stoschka, M., 1 May 2018, In: Metals : open access journal . 8, 5, 306.

    Research output: Contribution to journal › Article › Research › peer-review

  52. Published

    Impact of angular distortion on the fatigue performance of high-strength steel T-joints in as-welded and high frequency mechanical impact-treated condition

    Ottersböck, M. J., Leitner, M. & Stoschka, M., 1 May 2018, In: Metals : open access journal . 8, 5, 302.

    Research output: Contribution to journal › Article › Research › peer-review

  53. E-pub ahead of print

    Numerical fatigue assessment of welded and HFMI-treated joints by notch stress/strain and fracture mechanical approaches

    Leitner, M., Simunek, D., Shah, S. F. & Stoschka, M., 23 Feb 2018, (E-pub ahead of print) In: Advances in Engineering Software. 120.2018, June, p. 96-106 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  54. Published

    Betriebsfestigkeitsbewertung gegossener Bauteile aus Aluminium und Stahl

    Aigner, R., Pomberger, S., Schuscha, M., Leitner, M. & Stoschka, M., 21 Feb 2018, In: Gießerei-Rundschau. 2018, 01, p. 7-13

    Research output: Contribution to journal › Article › Research

  55. Published

    Lifetime assessment of cast aluminium components based on CT-evaluated microstructural defects

    Aigner, R., Stoschka, M., Leitner, M., Schneller, W. & Thuswaldner, J., 6 Feb 2018. 1 p.

    Research output: Contribution to conference › Poster › Research

  56. Published

    Fatigue Strength Assessment of Welded Mild Steel Joints Containing Bulk Imperfections

    Leitner, M., Murakami, Y., Farajian, M., Remes, H. & Stoschka, M., 2018, International Institute of Welding: IIW-Document XIII-WG4-162-18.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  57. Published

    Modification of a Defect-Based Fatigue Assessment Model for Al-Si-Cu Cast Alloys

    Aigner, R., Leitner, M., Stoschka, M., Hannesschläger, C., Wabro, T. & Ehart, R., 2018, In: Materials. 11, 12

    Research output: Contribution to journal › Article › Research › peer-review

  58. 2017
  59. Published

    Aus einem Guss

    Stoschka, M., Siemens Graz, Lettner, C. & Moshammer, T., 31 Dec 2017, 2 p.

    Research output: Book/Report › Other report › Research

  60. Published

    Aufbau einer numerischen Simulationskette für induktionsgehärtete Randschichten

    Aigner, R., Stoschka, M. & Leitner, M., 6 Nov 2017, ESI Forum 2017 Konferenzband.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  61. E-pub ahead of print

    Microporosity and statistical size effect on the fatigue strength of cast aluminium alloys EN AC-45500 and 46200

    Leitner, M., Garb, C., Remes, H. & Stoschka, M., 8 Sept 2017, (E-pub ahead of print) In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 707.2017, 7 November, p. 567-575 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  62. E-pub ahead of print

    Simulation of lamellar cast iron components under TMF-loads

    Strohhäussl, B., Stoschka, M., Winter, G. & Grün, F., 24 Aug 2017, (E-pub ahead of print) In: Materials Today: Proceedings. 4.2017, 5, Part 1, p. 5957-5962 6 p.

    Research output: Contribution to journal › Article › Research › peer-review

  63. Published

    Fatigue assessment of welded and high frequency mechanical impact (HFMI) treated joints by master notch stress approach

    Leitner, M., Stoschka, M. & Ottersböck, M., 1 Aug 2017, In: International Journal of Fatigue. 101.2017, August, Part 2, p. 232-243 12 p.

    Research output: Contribution to journal › Article › Research › peer-review

  64. Published

    A Novel Two-Disc Machine for High Precision Friction Assessment

    Moder, J., Grün, F., Stoschka, M. & Gódor, I., 28 Jun 2017, In: Advances in tribology. 2017, 1, 16 p.

    Research output: Contribution to journal › Article › Research › peer-review

  65. Published

    Analysis of fatigue notch effect due to axial misalignment for ultra high-strength steel butt joints

    Ottersböck, M., Leitner, M., Stoschka, M. & Maurer, W., 2017.

    Research output: Contribution to conference › Paper

  66. Published

    APPLICATION OF DIFFERENT SIMULATION APPROACHES TO NUMERICALLY OPTIMIZE HIGH FREQUENCY MECHANICAL IMPACT (HFMI) POST-TREATMENT PROCESS

    Ernould, C., Schubnell, J., Simunek, D., Leitner, M., Maciolek, A., Farajian, M. & Stoschka, M., 2017, COMMISSION XIII FATIGUE OF WELDED COMPONENTS AND STRUCTURES XIII-2684-17.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  67. Published

    Damage tolerant fatigue design of seam imperfections in mild steel butt joints by analytical and numerical approaches

    Leitner, M., Remes, H., Murakami, Y. & Stoschka, M., 2017, IIW-Dokument XIII-WG4-158-17.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  68. Published

    Effect of microporosity and surface condition on fatigue strength of casted aluminum components

    Leitner, M., Garb, C., Aigner, M. & Stoschka, M., 2017, 17th International ASTM/ESIS Symposium on Fatigue and Fracture Mechanics.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  69. Published

    Fatigue strength of welded ultra high-strength steel joints incorporating low transformation temperature (LTT) filler material and high frequency mechanical impact (HFMI) post-treatment

    Leitner, M., Ottersböck, M., Stoschka, M. & Maurer, W., 2017, Proceedings Euromat 2017.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  70. 2016
  71. E-pub ahead of print

    CIVIL COMP - Part 2

    Baratta, A., Barros, R. C., Citarella, R., Gentzsch, W., Kruis, J., Sextos, A. G., Stoschka, M., Iványi, P. & Topping, B. H. V., 22 Nov 2016, (E-pub ahead of print) In: Advances in Engineering Software. 101.2016, November, p. 1-2 2 p.

    Research output: Contribution to journal › Editorial › peer-review

  72. Published

    Measurement of dissolved hydrogen distributions after ultrasonic peening of heat-affected zone of welded joint

    Polyanskiy, V. A., Belyaev, A. K., Arseniev, D. G., Yakovlev, Y. A., Polyanskiy, A. M. & Stoschka, M., 18 Nov 2016, Mechanics, Resource and Diagnostics of Materials and Structures, MRDMS 2016: Proceedings of the 10th International Conference on Mechanics, Resource and Diagnostics of Materials and Structures. Vol. 1785. 030022

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  73. Published

    Quality assurance of HFMI-treatment regarding fatigue strength of fillet welds

    Stoschka, M., Leitner, M. (Co-editor) & Ottersböck, M. (Co-editor), 13 Jul 2016.

    Research output: Contribution to conference › Presentation › Research

  74. Published

    Application studies for fatigue strength improvement of welded structures by high-frequency mechanical impact (HFMI) treatment

    Yildirim, H. C., Leitner, M., Marquis, G. B., Stoschka, M. & Barsoum, Z., 2016, In: Engineering Structures. 106, p. 422-435 14 p.

    Research output: Contribution to journal › Article › Research › peer-review

  75. Published

    Effect of weld defects on the fatigue strength of ultra high-strength steels

    Ottersböck, M., Leitner, M., Stoschka, M. & Maurer, W., 2016, Proceedings of the ICMFM18.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  76. Published

    Effect of weld defects on the fatigue strength of ultra high-strength steels

    Ottersböck, M., Leitner, M., Stoschka, M. & Maurer, W., 2016, In: Procedia Engineering. 160, p. 214-222

    Research output: Contribution to journal › Article › Research › peer-review

  77. Published

    Fatigue strength of fillet welded specimens focussing on angular distortion: XIII-2634-16

    Ottersböck, M. (Co-editor), Leitner, M. & Stoschka, M. (Co-editor), 2016.

    Research output: Contribution to conference › Presentation › Research

  78. 2015
  79. Published

    Fatigue Strength of HFMI-treated and Stress-relief Annealed High-strength Steel Weld Joints: Fatigue Design 2015, International Conference Proceedings, 6th Edition

    Leitner, M., Gerstbrein, S., Ottersböck, M. & Stoschka, M., 31 Dec 2015, In: Procedia Engineering. 133, p. 477-484 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  80. Published

    Schwingfestigkeit ultrahochfester Schweißverbindungen

    Ottersböck, M., Leitner, M. & Stoschka, M., 30 Nov 2015.

    Research output: Contribution to conference › Presentation › Research

  81. Published

    Effect of post-weld heat treatment on the fatigue strength of HFMI-treated mild steel joints

    Leitner, M., Mössler, W., Putz, A. & Stoschka, M., 1 Nov 2015, In: Welding in the world. 59, 6, p. 861-873 13 p.

    Research output: Contribution to journal › Article › Research › peer-review

  82. Accepted/In press

    Effect of local stress state on fatigue strength of welded T-joints

    Ottersböck, M., Leitner, M. & Stoschka, M., 27 Sept 2015, (Accepted/In press) Mathematical Modelling of Weld Phenomena 11. p. 1-19

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  83. Published

    Fatigue strength of welded ultra high-strength steel joints

    Ottersböck, M., Leitner, M., Stoschka, M. & Maurer, W., 3 Jul 2015.

    Research output: Contribution to conference › Paper

  84. Published

    Effect of loading type on welded and HFMI-treated T-joints: XIII-2584-15

    Ottersböck, M., Leitner, M. & Stoschka, M., 29 Jun 2015.

    Research output: Contribution to conference › Paper

  85. Published

    Application of local approaches to assess the fatigue crack: XIII-WG3-36-15

    Stoschka, M., Leitner, M. & Ottersböck, M., 28 Jun 2015. 18 p.

    Research output: Contribution to conference › Presentation › Research

  86. Published

    Hyperworks applicaton examples regarding structural steel lightweight design

    Stoschka, M., 20 Mar 2015. 37 p.

    Research output: Contribution to conference › Presentation › Transfer

  87. Published

    Study of the support effect of welded high-strength steel joints

    Ottersböck, M., Leitner, M. & Stoschka, M., 5 Mar 2015.

    Research output: Contribution to conference › Presentation › Research

  88. Published

    Stützwirkungseffekt bei der Ermüdungsfestigkeit hochfester Stahlschweißverbindungen

    Ottersböck, M., Leitner, M. & Stoschka, M., 12 Feb 2015.

    Research output: Contribution to conference › Presentation › Research

  89. Published

    Application studies for the fatigue strength improvement of welded structures by high-frequency mechanical impact (HFMI) treatment

    Yildirim, H. C., Leitner, M., Marquis, G. B., Stoschka, M. & Barsoum, Z., 2015.

    Research output: Contribution to conference › Presentation › Research

  90. Published

    Beitrag zur Schwingfestigkeit von HFMI-behandelten Proben und Diskussion lokaler Ansätze zur Bauteilauslegung

    Stoschka, M. & Leitner, M., 2015. 19 p.

    Research output: Contribution to conference › Presentation › Research

  91. Published

    Fatigue strength of HFMI-treated high-strength steel joints under constant and variable amplitude block loading

    Leitner, M., Gerstbrein, S., Ottersböck, M. J. & Stoschka, M., 2015, In: Procedia Engineering. 101, p. 251-258 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  92. Published

    Local fatigue assessment of welded and high frequency mechanical impact (HFMI) treated joints by simulation

    Simunek, D., Leitner, M. & Stoschka, M., 2015.

    Research output: Contribution to conference › Poster › Research

  93. 2014
  94. E-pub ahead of print

    Ermüdungsfestigkeit hochfester Stahlschweißverbindungen: Fatigue Strength of High-strength Welded Steel Joints

    Leitner, M., Stoschka, M., Ottersböck, M. & Simunek, D., 13 Dec 2014, (E-pub ahead of print) In: Berg- und hüttenmännische Monatshefte : BHM. 160.2015, 1, p. 9-14 6 p.

    Research output: Contribution to journal › Article › Research

  95. Published

    A study on the fatigue crack initiation point of longitudinal attachments

    Ottersböck, M., Leitner, M. & Stoschka, M., 17 Mar 2014.

    Research output: Contribution to conference › Presentation › Research

  96. Published

    Bewertung der Betriebsfestigkeit von Schweißnähten basierend auf einer Schweißstruktursimulation

    Ottersböck, M., Maier, B. & Stoschka, M., 2014, Tagungsband „Simulationsforum Schweißen und Wärmebehandlung 2013“. p. 1-12

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  97. Published

    Contact fatigue life investigations and wear mechanisms of gears with different steels and hardening process

    Trausmuth, A., Badisch, E., Godor, I., Stoschka, M., Grün, F. & Dietrich, A., 2014, 5th World Tribology Congress, WTC 2013. Vol. 3. p. 2620-2623 4 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  98. Published

    Contribution towards fatigue strength of thermo-mechanically processed metallic components

    Stoschka, M., 2014

    Research output: Thesis › Habilitation thesis › peer-review

  99. Published

    Fatigue enhancement of thin-walled high-strength steel joints by high frequency mechanical impact treatment

    Leitner, M., Stoschka, M. & Eichlseder, W., 2014, In: Welding in the world. 58, p. 29-39

    Research output: Contribution to journal › Article › Research › peer-review

  100. Published

    Integration of Phase-Dependent Work-Hardening into Transient Weld Simulation

    Stoschka, M., Ottersböck, M. & Leitner, M., 2014, Proceedings of the Ninth International Conference on Engineering Computational Technology. p. 1-15

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  101. Published

    Local Fatigue Assessment of Welded and High Frequency Mechanical Impact-Treated Joints based on Manufacturing Process Simulation

    Leitner, M., Simunek, D. & Stoschka, M., 2014, Proceedings of the Ninth International Conference on Engineering Computational Technology. p. 1-16

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  102. 2013
  103. Published

    The influence of microstructure and operating temperature on the fatigue endurance of hot forged Inconel (R) 718 components

    Maderbacher, H., Oberwinkler, B., Gänser, H.-P., Tan, W., Rollett, M. & Stoschka, M., 15 Nov 2013, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 585, p. 123-131

    Research output: Contribution to journal › Article › Research › peer-review

  104. Published

    Assessment of HFMI post-treated joints by the notch stress approach

    Leitner, M., Stoschka, M. & Eichlseder, W., 2013, Proceedings of the 13th International SF2M Spring Meeting. p. 90-102

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  105. Published

    Comprehensive Investigations of new Filler Materials for Welding of High Strength Steels

    Schnitzer, R., Rauch, R., Ernst, W., Wagner, J., Baumgartner, S., Leitner, M., Stoschka, M., Schlagradl, T., Schneider, R. & Bernhard, C., 2013, Proceedings of the 3rd International Conference. p. 323-332

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  106. Published

    Contact fatigue life and wear mechanisms of case hardened and nidrided steels

    Trausmuth, A., Badisch, E., Godor, I., Stoschka, M., Grün, F. & Dietrich, A., 2013, Proceedings of Baltmatrib 2013. p. 18-18

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  107. Published

    Contact fatigue life investigations and wear mechanisms of different case hardened surfaces under rolling contact loading for gears

    Trausmuth, A., Badisch, E., Godor, I., Stoschka, M., Grün, F. & Dietrich, A., 2013, VDI Berichte 2199.1. p. 497-509

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  108. Published

    Distortion analysis of a welded corner stiffening frame considering manufacturing restraining conditions

    Stoschka, M., Loose, T. & Barsoum, Z., 2013, In: Computers & Structures.

    Research output: Contribution to journal › Article › Research › peer-review

  109. Published

    Effect of high-strength filler metals on the fatigue behaviour of butt joints

    Stoschka, M., Leitner, M., Posch, G. & Eichlseder, W., 2013, In: Welding in the world. 57, p. 85-96

    Research output: Contribution to journal › Article › Research › peer-review

  110. Published

    Kontaktermüdung und Verschleiß von einsatzgehärteten Stählen und Nitrierschichten

    Trausmuth, A., Badisch, E., Godor, I., Stoschka, M., Grün, F. & Dietrich, A., 2013, Proceedings der Tribologie Fachtagung 2013 der Gesellschaft für Tribologie (GfT). p. 1-11

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  111. Published

    Local fatigue assessment of welded and high frequency mechanical impact (HFMI) treated joints by simulation

    Simunek, D., Leitner, M. & Stoschka, M., 2013.

    Research output: Contribution to conference › Poster › Research › peer-review

  112. Published

    Numerical simulation loop to investigate the local fatigue behaviour of welded and HFMI-treated joints: XIII-WG2-136-13

    Simunek, D., Leitner, M. & Stoschka, M., 2013

    Research output: Non-textual form › Web publication/site › Research

Previous 1 2 3 Next
View graph of relations

Contact

Phone: 1455

Latest Research Output

View more (208)