Martin Stockinger

61 - 80 out of 91Page size: 20

Research output

  1. 2012
  2. Published

    Modelling the micromorphology of heat treated Ti6Al4V forgings by means of spatial tessellations feasible for FEM analyses of microscale residual stresses

    Regener, B., Krempaszky, C., Werner, E. & Stockinger, M., Feb 2012, In: Computational materials science. 52, 1, p. 77-81 5 p.

    Research output: Contribution to journal › Article › Research › peer-review

  3. Published

    Determination of the mechanism of restoration in subtransus hot deformation of Ti-6Al-4V

    Warchomicka, F., Poletti, C., Stockinger, M. & Degischer, H. P., 2012, THERMEC 2011. Trans Tech Publications, p. 252-257 6 p. (Materials Science Forum; vol. 706-709).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  4. Published

    Dynamic phase evolution in titanium alloy Ti-6A1-4V

    Homporová, P., Poletti, C., Stockinger, M. & Warchomicka, F., 2012, Ti 2011 - Proceedings of the 12th World Conference on Titanium. p. 737-740 4 p. (Ti 2011 - Proceedings of the 12th World Conference on Titanium; vol. 1).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  5. Published

    Evolution of beta grain size during beta phase processing of Ti-6A1-4V

    Krumphals, A., Stockinger, M., Warchomicka, F. & Sommitsch, C., 2012, Ti 2011 - Proceedings of the 12th World Conference on Titanium. p. 493-496 4 p. (Ti 2011 - Proceedings of the 12th World Conference on Titanium; vol. 1).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  6. Published

    FEM-optimized thermomechanical processing of titanium alloy blades for steam turbines

    Stockinger, M., Zechner, W., Krenn, G. & Weber, G., 2012, Ti 2011 - Proceedings of the 12th World Conference on Titanium. p. 298-301 4 p. (Ti 2011 - Proceedings of the 12th World Conference on Titanium; vol. 1).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  7. Published

    FE2 scheme for simulation of thermo-mechanically induced phase transformations and residual stresses in Ti6A14V components

    Regener, B., Krempaszky, C., Werner, E. & Stockinger, M., 2012, Ti 2011 - Proceedings of the 12th World Conference on Titanium. p. 632-636 5 p. (Ti 2011 - Proceedings of the 12th World Conference on Titanium; vol. 1).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  8. Published

    Influence of temperature and strain rate on dynamic softening processes in Allvac® 718Plus™

    Mitsche, S., Sommitsch, C., Huber, D., Stockinger, M. & Poelt, P., 2012, THERMEC 2011. Trans Tech Publications, p. 2440-2445 6 p. (Materials Science Forum; vol. 706-709).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  9. Published

    Microstructural characterization of hot deformed Ti-6A1-4V

    Warchomicka, F., Poletti, C. & Stockinger, M., 2012, Ti 2011 - Proceedings of the 12th World Conference on Titanium. p. 729-732 4 p. (Ti 2011 - Proceedings of the 12th World Conference on Titanium; vol. 1).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  10. 2011
  11. Published

    Study of the hot deformation behaviour in Ti-5Al-5Mo-5V-3Cr-1Zr

    Warchomicka, F., Poletti, C. & Stockinger, M., 25 Oct 2011, In: Materials Science and Engineering A. 528, 28, p. 8277-8285 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  12. Published

    Comparison between microstructure evolution in IN718 and ATI Allvac® 718PlusTM - Simulation and trial forgings

    Huber, D., Sommitsch, C. & Stockinger, M., 4 Jul 2011, In: Advanced materials research. 278, p. 168-173 6 p.

    Research output: Contribution to journal › Article › Research › peer-review

  13. Published

    Assessment of dynamic softening mechanisms in Allvac® 718Plus™ by EBSD analysis

    Mitsche, S., Sommitsch, C., Huber, D., Stockinger, M. & Poelt, P., 25 Apr 2011, In: Materials Science and Engineering A. 528, 10-11, p. 3754-3760 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  14. 2010
  15. Published

    Microstructure evolution during hot deformation of Ti-6Al-4V double cone specimens

    Warchomicka, F., Poletti, C., Stockinger, M. & Henke, T., Apr 2010, In: International journal of material forming. 3, SUPPL. 1, p. 215-218 4 p.

    Research output: Contribution to journal › Article › Research › peer-review

  16. Published

    Effect of process modeling on product quality of superalloy forgings

    Stockinger, M., Riedler, M. & Huber, D., 2010, 7th International Symposium on Superalloy 718 and Derivatives 2010. p. 183-197 15 p. (7th International Symposium on Superalloy 718 and Derivatives 2010; vol. 1).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  17. Published

    Interaction of the precipitation kinetics of δ and γ' phases in nickel-base superalloy ATI Allvac® 718Plus™

    Radis, R., Zickler, G. A., Stockinger, M., Sommitsch, C. & Kozeschnik, E., 2010, THERMEC 2009. Chandra, T., Chandra, T., Chandra, T., Wanderka, N., Wanderka, N., Wanderka, N., Reimers, W., Reimers, W., Reimers, W., Ionescu, M., Ionescu, M. & Ionescu, M. (eds.). Trans Tech Publications, p. 2712-2717 6 p. (Materials Science Forum; vol. 638-642).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  18. Published

    Metadynamic recrystallization of the nickel-based superalloy Allvac 718Plus™

    Sommitsch, C., Huber, D. & Stockinger, M., 2010, THERMEC 2009. Chandra, T., Chandra, T., Chandra, T., Wanderka, N., Wanderka, N., Wanderka, N., Reimers, W., Reimers, W., Reimers, W., Ionescu, M., Ionescu, M. & Ionescu, M. (eds.). Trans Tech Publications, p. 2327-2332 6 p. (Materials Science Forum; vol. 638-642).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  19. Published

    Numerical simulation of the simultaneous precipitation of δ and γ′ phases in the Ni-base superalloy ATI Allvac®718 Plus™

    Radis, R., Zickler, G. A., Stockinger, M., Sommitsch, C. & Kozeschnik, E., 2010, 7th International Symposium on Superalloy 718 and Derivatives 2010. p. 569-578 10 p. (7th International Symposium on Superalloy 718 and Derivatives 2010; vol. 2).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  20. 2008
  21. Published

    Automatic feature extraction from micrographs of forged superalloys

    Berhuber, E., Rinnhofer, A., Stockinger, M., Benesova, W. & Jakob, G., Jul 2008, In: JOM. 60, 7, p. 49-53 5 p.

    Research output: Contribution to journal › Article › Research › peer-review

  22. Published

    Characterization of δ-phase in superalloy Allvac 718Plus™

    Stotter, C., Sommitsch, C., Wagner, J., Leitner, H., Letofsky-Papst, I., Zickler, G. A., Prantl, W. & Stockinger, M., Apr 2008, In: Zeitschrift fuer Metallkunde/Materials Research and Advanced Techniques. 99, 4, p. 376-380 5 p.

    Research output: Contribution to journal › Article › Research › peer-review

  23. Published

    Assessment of lifetime calculation of forged IN718 aerospace components based on a mulit-parametric microstructural evaluation

    Stoschka, M., Stockinger, M., Leitner, H., Riedler, M. & Eichlseder, W., 2008, SUPERALLOYS 2008. p. 573-582

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  24. Published

    δ-phase characterization of superalloy Allvac 718 Plus™

    Sommitsch, C., Stotter, C., Leitner, H., Mitsche, S., Letofsky-Papst, I. & Stockinger, M., 2008, TMS2008 - 137th Annual Meeting and Exhibition Supplemental Proceedings: Materials Processing and Properties. p. 63-68 6 p. (TMS Annual Meeting; vol. 2).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

Previous 1 2 3 4 5 Next
View graph of relations

Contact

Phone: 5600

Latest Research Output

View more (91)