Martin Stockinger

51 - 91 out of 91Page size: 50

Research output

  1. 2014

  2. Comparison of microstructural changes in three different Ni-base superalloys after cyclic thermo-mechanical treatment

    Huber, D., Hacksteiner, M., Poletti, C., Warchomicka, F. & Stockinger, M., 1 Jan 2014, 8th International Symposium on Superalloy 718 and Derivatives 2014. Helmink, R., Banik, A., Ott, E., Andersson, J., Groh, J., Heck, K., Dempster, I., Gabb, T., Liu, X. & Wusatowska-Sarnek, A. (eds.). p. 303-315 13 p. (8th International Symposium on Superalloy 718 and Derivatives 2014).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  3. Thermomechanical behavior of different Ni-base superalloys during cyclic loading at elevated temperatures

    Huber, D., Hacksteiner, M., Poletti, C., Warchomicka, F. & Stockinger, M., 1 Jan 2014, In: MATEC Web of Conferences . 14, 10002.

    Research output: Contribution to journal › Conference article › peer-review

  4. Published

    Modeling of two-phase grain structure in the titanium alloy TI-6AL-4V using cellular automata

    Krumphals, A., Poletti, C., Warchomicka, F., Stockinger, M. & Sommitsch, C., 2014, In: International journal for multiscale computational engineering. 12, 1, p. 23-31 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  5. Published

    Modelling of the ductile damage behaviour of a beta solidifying gamma titanium aluminide alloy during hot-working

    Halici, D., Prodinger, D., Poletti, C., Huber, D., Stockinger, M. & Sommitsch, C., 2014, THERMEC 2013. Mishra, B., Ionescu, M. & Chandra, T. (eds.). Trans Tech Publications, p. 556-561 6 p. (Materials Science Forum; vol. 783-786).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  6. Published

    Simulation of yield strength in Allvacspi® 718Plus™

    Ahmadi, M. R., Whitmore, L., Povoden-Karadeniz, E., Stockinger, M., Falahati, A. & Kozeschnik, E., 2014, THERMEC 2013 Supplement. Trans Tech Publications, p. 7-12 6 p. (Advanced Materials Research; vol. 922).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  7. Published

    Studies on ductile damage and flow instabilities during hot deformation of a multiphase ã-TiAl alloy

    Halici, D., Zamani, H. A., Prodinger, D., Poletti, C., Huber, D., Stockinger, M. & Sommitsch, C., 2014, Material Forming ESAFORM 2014. Trans Tech Publications, p. 99-105 7 p. (Key Engineering Materials; vol. 611-612).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  8. 2013
  9. Published

    Modeling of dual-phase grain structure in Ti-6Al-4V during isothermal and non-isothermal heat treatment using cellular automata

    Krumphals, A., Poletti, C., Warchomicka, F., Stockinger, M. & Sommitsch, C., 2013, Recrystallization and Grain Growth V. Trans Tech Publications, p. 353-356 4 p. (Materials Science Forum; vol. 753).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  10. 2012
  11. Published

    A closed concept to associate the hot-forging process controlled microstructure with fatigue life

    Stoschka, M., Stockinger, M., Maderbacher, H. & Riedler, M., 2 Oct 2012, Superalloys 2012 - Proceedings of the 12th International Symposium on Superalloys. p. 625-631 7 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  12. Published

    Modeling of grain growth in one and two phase materials by 2D cellular automata

    Sommitsch, C., Krumphals, A., Candic, M., Tian, B. & Stockinger, M., Sept 2012, In: Journal of computational and theoretical nanoscience. 9, 9, p. 1515-1524 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  13. Published

    Microstructure control in processing nickel, titanium and other special alloys

    Sommitsch, C., Radis, R., Krumphals, A., Stockinger, M. & Huber, D., Jul 2012, Microstructure Evolution in Metal Forming Processes. Elsevier Ltd, p. 337-383 47 p.

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  14. Published

    Modelling the micromorphology of heat treated Ti6Al4V forgings by means of spatial tessellations feasible for FEM analyses of microscale residual stresses

    Regener, B., Krempaszky, C., Werner, E. & Stockinger, M., Feb 2012, In: Computational materials science. 52, 1, p. 77-81 5 p.

    Research output: Contribution to journal › Article › Research › peer-review

  15. Published

    Determination of the mechanism of restoration in subtransus hot deformation of Ti-6Al-4V

    Warchomicka, F., Poletti, C., Stockinger, M. & Degischer, H. P., 2012, THERMEC 2011. Trans Tech Publications, p. 252-257 6 p. (Materials Science Forum; vol. 706-709).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  16. Published

    Dynamic phase evolution in titanium alloy Ti-6A1-4V

    Homporová, P., Poletti, C., Stockinger, M. & Warchomicka, F., 2012, Ti 2011 - Proceedings of the 12th World Conference on Titanium. p. 737-740 4 p. (Ti 2011 - Proceedings of the 12th World Conference on Titanium; vol. 1).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  17. Published

    Evolution of beta grain size during beta phase processing of Ti-6A1-4V

    Krumphals, A., Stockinger, M., Warchomicka, F. & Sommitsch, C., 2012, Ti 2011 - Proceedings of the 12th World Conference on Titanium. p. 493-496 4 p. (Ti 2011 - Proceedings of the 12th World Conference on Titanium; vol. 1).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  18. Published

    FEM-optimized thermomechanical processing of titanium alloy blades for steam turbines

    Stockinger, M., Zechner, W., Krenn, G. & Weber, G., 2012, Ti 2011 - Proceedings of the 12th World Conference on Titanium. p. 298-301 4 p. (Ti 2011 - Proceedings of the 12th World Conference on Titanium; vol. 1).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  19. Published

    FE2 scheme for simulation of thermo-mechanically induced phase transformations and residual stresses in Ti6A14V components

    Regener, B., Krempaszky, C., Werner, E. & Stockinger, M., 2012, Ti 2011 - Proceedings of the 12th World Conference on Titanium. p. 632-636 5 p. (Ti 2011 - Proceedings of the 12th World Conference on Titanium; vol. 1).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  20. Published

    Influence of temperature and strain rate on dynamic softening processes in Allvac® 718Plus™

    Mitsche, S., Sommitsch, C., Huber, D., Stockinger, M. & Poelt, P., 2012, THERMEC 2011. Trans Tech Publications, p. 2440-2445 6 p. (Materials Science Forum; vol. 706-709).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  21. Published

    Microstructural characterization of hot deformed Ti-6A1-4V

    Warchomicka, F., Poletti, C. & Stockinger, M., 2012, Ti 2011 - Proceedings of the 12th World Conference on Titanium. p. 729-732 4 p. (Ti 2011 - Proceedings of the 12th World Conference on Titanium; vol. 1).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  22. 2011
  23. Published

    Study of the hot deformation behaviour in Ti-5Al-5Mo-5V-3Cr-1Zr

    Warchomicka, F., Poletti, C. & Stockinger, M., 25 Oct 2011, In: Materials Science and Engineering A. 528, 28, p. 8277-8285 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  24. Published

    Comparison between microstructure evolution in IN718 and ATI Allvac® 718PlusTM - Simulation and trial forgings

    Huber, D., Sommitsch, C. & Stockinger, M., 4 Jul 2011, In: Advanced materials research. 278, p. 168-173 6 p.

    Research output: Contribution to journal › Article › Research › peer-review

  25. Published

    Assessment of dynamic softening mechanisms in Allvac® 718Plus™ by EBSD analysis

    Mitsche, S., Sommitsch, C., Huber, D., Stockinger, M. & Poelt, P., 25 Apr 2011, In: Materials Science and Engineering A. 528, 10-11, p. 3754-3760 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  26. 2010
  27. Published

    Microstructure evolution during hot deformation of Ti-6Al-4V double cone specimens

    Warchomicka, F., Poletti, C., Stockinger, M. & Henke, T., Apr 2010, In: International journal of material forming. 3, SUPPL. 1, p. 215-218 4 p.

    Research output: Contribution to journal › Article › Research › peer-review

  28. Published

    Effect of process modeling on product quality of superalloy forgings

    Stockinger, M., Riedler, M. & Huber, D., 2010, 7th International Symposium on Superalloy 718 and Derivatives 2010. p. 183-197 15 p. (7th International Symposium on Superalloy 718 and Derivatives 2010; vol. 1).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  29. Published

    Interaction of the precipitation kinetics of δ and γ' phases in nickel-base superalloy ATI Allvac® 718Plus™

    Radis, R., Zickler, G. A., Stockinger, M., Sommitsch, C. & Kozeschnik, E., 2010, THERMEC 2009. Chandra, T., Chandra, T., Chandra, T., Wanderka, N., Wanderka, N., Wanderka, N., Reimers, W., Reimers, W., Reimers, W., Ionescu, M., Ionescu, M. & Ionescu, M. (eds.). Trans Tech Publications, p. 2712-2717 6 p. (Materials Science Forum; vol. 638-642).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  30. Published

    Metadynamic recrystallization of the nickel-based superalloy Allvac 718Plus™

    Sommitsch, C., Huber, D. & Stockinger, M., 2010, THERMEC 2009. Chandra, T., Chandra, T., Chandra, T., Wanderka, N., Wanderka, N., Wanderka, N., Reimers, W., Reimers, W., Reimers, W., Ionescu, M., Ionescu, M. & Ionescu, M. (eds.). Trans Tech Publications, p. 2327-2332 6 p. (Materials Science Forum; vol. 638-642).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  31. Published

    Numerical simulation of the simultaneous precipitation of δ and γ′ phases in the Ni-base superalloy ATI Allvac®718 Plus™

    Radis, R., Zickler, G. A., Stockinger, M., Sommitsch, C. & Kozeschnik, E., 2010, 7th International Symposium on Superalloy 718 and Derivatives 2010. p. 569-578 10 p. (7th International Symposium on Superalloy 718 and Derivatives 2010; vol. 2).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  32. 2008
  33. Published

    Automatic feature extraction from micrographs of forged superalloys

    Berhuber, E., Rinnhofer, A., Stockinger, M., Benesova, W. & Jakob, G., Jul 2008, In: JOM. 60, 7, p. 49-53 5 p.

    Research output: Contribution to journal › Article › Research › peer-review

  34. Published

    Characterization of δ-phase in superalloy Allvac 718Plus™

    Stotter, C., Sommitsch, C., Wagner, J., Leitner, H., Letofsky-Papst, I., Zickler, G. A., Prantl, W. & Stockinger, M., Apr 2008, In: Zeitschrift fuer Metallkunde/Materials Research and Advanced Techniques. 99, 4, p. 376-380 5 p.

    Research output: Contribution to journal › Article › Research › peer-review

  35. Published

    Assessment of lifetime calculation of forged IN718 aerospace components based on a mulit-parametric microstructural evaluation

    Stoschka, M., Stockinger, M., Leitner, H., Riedler, M. & Eichlseder, W., 2008, SUPERALLOYS 2008. p. 573-582

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  36. Published

    δ-phase characterization of superalloy Allvac 718 Plus™

    Sommitsch, C., Stotter, C., Leitner, H., Mitsche, S., Letofsky-Papst, I. & Stockinger, M., 2008, TMS2008 - 137th Annual Meeting and Exhibition Supplemental Proceedings: Materials Processing and Properties. p. 63-68 6 p. (TMS Annual Meeting; vol. 2).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  37. 2007
  38. Published

    Flow Behaviour and Microstructure during Hot Deformation of Ti-5Al-5Mo-5V-3Cr-1Zr

    Warchomicka, F., Stockinger, M. & Degischer, H. P., 2007, Ti-2007 - Proceedings of the 11th World Conference on Titanium. Niinomi, M., Akiyama, S., Ikeda, M., Hagiwara, M. & Maruyama, K. (eds.). p. 511-514 4 p. (Ti-2007 - Proceedings of the 11th World Conference on Titanium; vol. 1).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  39. Published

    Local Deformation of Ti Alloys and Ti Matrix Composites

    Poletti, C., Warchomicka, F., Kremmer, S., Stockinger, M. & Degischer, H. P., 2007, Ti-2007 - Proceedings of the 11th World Conference on Titanium. Niinomi, M., Akiyama, S., Ikeda, M., Hagiwara, M. & Maruyama, K. (eds.). p. 595-598 4 p. (Ti-2007 - Proceedings of the 11th World Conference on Titanium; vol. 1).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  40. 2006
  41. Published

    Quantitative analysis of the microstructure of near β titanium alloy during compression tests

    Warchomicka, F., Stockinger, M. & Degischer, H. P., 3 Jul 2006, In: Journal of materials processing technology. 177, 1-3, p. 473-477 5 p.

    Research output: Contribution to journal › Article › Research › peer-review

  42. Published

    Feature extraction from micrographs of forged nickel based alloy

    Rinnhofer, A., Benesova, W., Jakob, G. & Stockinger, M., 2006, Proceedings - 18th International Conference on Pattern Recognition, ICPR 2006. p. 391-394 4 p. 1699227. (Proceedings - International Conference on Pattern Recognition; vol. 2).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  43. 2005
  44. Published

    Analysis of microstructural properties of in 718 after high speed forging

    Renhof, L., Krempaszky, C., Werner, E. & Stockinger, M., 2005, p. 261-270. 10 p.

    Research output: Contribution to conference › Paper › peer-review

  45. Published

    Measurement of marcoscopic residual stress and resulting distortion during machining

    Krempaszky, C., Werner, E. A. & Stockinger, M., 2005, Materials Science and Technology 2005 - Proceedings of the Conference. p. 109-118 10 p. (Materials Science and Technology; vol. 4).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  46. Published

    Optimizing the forging of critical aircraft parts by the use of finite element coupled microstructure modeling

    Stockinger, M. & Tockner, J., 2005, p. 87-95. 9 p.

    Research output: Contribution to conference › Paper › peer-review

  47. Published

    Residual stresses in IN 718 turbine disks

    Krempaszky, C., Werner, E. A. & Stockinger, M., 2005, p. 527-538. 12 p.

    Research output: Contribution to conference › Paper › peer-review

  48. Published

    Spray forming and post processing of superalloy rings

    Walter, M., Stockinger, M., Tockner, J., Ellendt, N. & Uhlenwinkel, V., 2005, p. 429-440. 12 p.

    Research output: Contribution to conference › Paper › peer-review

  49. 2004
  50. Published

    Microstructure modeling as a tool to optimize forging of critical aircraft parts

    Stockinger, M. & Tockner, J., 2004, In: Materials Science Forum . 467-470, I, p. 683-688 6 p.

    Research output: Contribution to journal › Conference article › peer-review

  51. 2001
  52. Published

    Modelling of δ-phase dissolution during preheating of INCONEL718 turbine disks

    Stockinger, M., Kozeschnik, E., Buchmayr, B. & Horvath, W., 2001, p. 141-148. 8 p.

    Research output: Contribution to conference › Paper › peer-review

Previous 1 2 Next
View graph of relations

Contact

Phone: 5600

Latest Research Output

View more (91)