Martin Leitner

(Former)

101 - 200 out of 204Page size: 100

Research output

  1. 2017
  2. Published

    Influence of effective stress ratio on the fatigue strength of welded and HFMI-treated high-strength steel joints

    Leitner, M., 1 Sept 2017, In: International Journal of Fatigue. 102.2017, September, p. 158-170 13 p.

    Research output: Contribution to journal › Article › Research › peer-review

  3. Published

    Crack growth under constant amplitude loading and overload effects in 1:3 scale specimens

    Simunek, D., Leitner, M., Maierhofer, J. & Gänser, H.-P., 17 Aug 2017, In: Procedia structural integrity / ESIS. 2017, 4, p. 27-34 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  4. Published

    Fatigue assessment of welded and high frequency mechanical impact (HFMI) treated joints by master notch stress approach

    Leitner, M., Stoschka, M. & Ottersböck, M., 1 Aug 2017, In: International Journal of Fatigue. 101.2017, August, Part 2, p. 232-243 12 p.

    Research output: Contribution to journal › Article › Research › peer-review

  5. Published

    Stability of high frequency mechanical impact (HFMI) post-treatment induced residual stress states under cyclic loading of welded steel joints

    Leitner, M., Khurshid, M. & Barsoum, Z., 15 Jul 2017, In: Engineering Structures. 143.2017, 15 July, p. 589-602 14 p.

    Research output: Contribution to journal › Article › Research › peer-review

  6. Published

    Multiaxial fatigue strength assessment of electroslag remelted 50CrMo4 steel crankshafts

    Leitner, M., Tuncali, Z., Steiner, R. & Grün, F., 1 Jul 2017, In: International Journal of Fatigue. 100.2017, July, Part 1, p. 159-175 17 p.

    Research output: Contribution to journal › Article › Research › peer-review

  7. Published

    Residual stress state induced by high frequency mechanical impact treatment in different steel grades – Numerical and experimental study

    Khurshid, M., Leitner, M., Barsoum, Z. & Schneider, C., 1 Apr 2017, In: International Journal of Mechanical Sciences. 123.2017, April, p. 34-42 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  8. E-pub ahead of print

    Application of √area-concept to assess fatigue strength of AlSi7Cu0.5Mg casted components

    Garb, C., Leitner, M. & Grün, F., 15 Mar 2017, (E-pub ahead of print) In: Engineering Fracture Mechanics. 185.2017, November, p. 61-71 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  9. Published

    A layer approach to model fatigue strength of surface-hardened components

    Dobberke, D., Wiebesiek, J., Fröschl, J. & Leitner, M., 2017, Proceedings of the Fatigue Design Conference 2017.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  10. Published

    Analysis of fatigue notch effect due to axial misalignment for ultra high-strength steel butt joints

    Ottersböck, M., Leitner, M., Stoschka, M. & Maurer, W., 2017.

    Research output: Contribution to conference › Paper

  11. Published

    APPLICATION OF DIFFERENT SIMULATION APPROACHES TO NUMERICALLY OPTIMIZE HIGH FREQUENCY MECHANICAL IMPACT (HFMI) POST-TREATMENT PROCESS

    Ernould, C., Schubnell, J., Simunek, D., Leitner, M., Maciolek, A., Farajian, M. & Stoschka, M., 2017, COMMISSION XIII FATIGUE OF WELDED COMPONENTS AND STRUCTURES XIII-2684-17.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  12. Published

    Damage tolerant fatigue design of seam imperfections in mild steel butt joints by analytical and numerical approaches

    Leitner, M., Remes, H., Murakami, Y. & Stoschka, M., 2017, IIW-Dokument XIII-WG4-158-17.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  13. Published

    Effect of microporosity and surface condition on fatigue strength of casted aluminum components

    Leitner, M., Garb, C., Aigner, M. & Stoschka, M., 2017, 17th International ASTM/ESIS Symposium on Fatigue and Fracture Mechanics.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  14. Published

    Fatigue strength of welded and HFMI-treated steel joints under constant and variable amplitude loading

    Leitner, M., Ottersböck, M., Pußwald, S. & Remes, H., 2017, IIW-Dokument XIII-2691-17.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  15. Published

    Fatigue strength of welded ultra high-strength steel joints incorporating low transformation temperature (LTT) filler material and high frequency mechanical impact (HFMI) post-treatment

    Leitner, M., Ottersböck, M., Stoschka, M. & Maurer, W., 2017, Proceedings Euromat 2017.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  16. Published

    Local fatigue strength assessment of induction hardened components based on numerical manufacturing process simulation

    Leitner, M., Aigner, R. & Dobberke, D., 2017, Proceedings of the Fatigue Design Conference 2017.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  17. Published

    Wear and fatigue resistance of mild steel components reinforced by arc welded hard layers

    Leitner, M., Pichler, P., Steinwender, F. & Guster, C., 2017, In: Surface & coatings technology. 330.2017, 1 December, p. 140-148 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  18. 2016
  19. Published

    Fatigue Strength Assessment of AlSi7Cu0.5Mg T6W Castings Supported by Computed Tomography Microporosity Analysis

    Garb, C., Leitner, M. & Grün, F., 17 Sept 2016, In: Procedia Engineering. 160.2016, p. 53-60 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  20. Published

    Fatigue Strength Assessment of AlSi7Cu0.5Mg T6W Castings Supported by Computed Tomography Microporosity Analysis

    Garb, C., Leitner, M. & Grün, F., 5 Sept 2016.

    Research output: Contribution to conference › Presentation › Research › peer-review

  21. Published

    Quality assurance of HFMI-treatment regarding fatigue strength of fillet welds

    Stoschka, M., Leitner, M. (Co-editor) & Ottersböck, M. (Co-editor), 13 Jul 2016.

    Research output: Contribution to conference › Presentation › Research

  22. Published

    Application studies for fatigue strength improvement of welded structures by high-frequency mechanical impact (HFMI) treatment

    Yildirim, H. C., Leitner, M., Marquis, G. B., Stoschka, M. & Barsoum, Z., 2016, In: Engineering Structures. 106, p. 422-435 14 p.

    Research output: Contribution to journal › Article › Research › peer-review

  23. Published

    Betriebsfestigkeit geschweißter Leichtbaustrukturen

    Leitner, M., 2016.

    Research output: Contribution to conference › Presentation › Research

  24. Published

    Crack propagation analysis and rehabilitation by HFMI of pre-fatigued welded structures

    Leitner, M., Barsoum, Z. & Schäfers, F., 2016, In: Welding in the world.

    Research output: Contribution to journal › Article › Research › peer-review

  25. Published

    Effect of weld defects on the fatigue strength of ultra high-strength steels

    Ottersböck, M., Leitner, M., Stoschka, M. & Maurer, W., 2016, Proceedings of the ICMFM18.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  26. Published

    Effect of weld defects on the fatigue strength of ultra high-strength steels

    Ottersböck, M., Leitner, M., Stoschka, M. & Maurer, W., 2016, In: Procedia Engineering. 160, p. 214-222

    Research output: Contribution to journal › Article › Research › peer-review

  27. Published

    Experimental evaluation of cutting forces for chipping process and developement of wood material model

    Pichler, P., Leitner, M., Grün, F. & Guster, C., 2016, CD-ROM Proceedings of the World Conference on Timber Engineering: WCTE 2016. Eberhardsteiner, J., Winter, W., Fadai, A. & Pöll, M. (eds.). 8 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  28. Published

    Experimental evaluation of cutting forces for chipping process and development of wood material model

    Pichler, P., Leitner, M., Grün, F. & Guster, C., 2016, WCTE 2016 - World Conference on Timber Engineering.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  29. Published

    Fatigue strength of fillet welded specimens focussing on angular distortion: XIII-2634-16

    Ottersböck, M. (Co-editor), Leitner, M. & Stoschka, M. (Co-editor), 2016.

    Research output: Contribution to conference › Presentation › Research

  30. Published

    Mechanical post-treatment of induction-hardened surface layers to optimize fatigue strength of crankshafts

    Leitner, M., Tuncali, Z., Chen, W. & Grün, F., 2016.

    Research output: Contribution to conference › Presentation › Research

  31. Published

    Multiaxial fatigue assessment of crankshafts by local stress and critical plane approach

    Leitner, M., Grün, F., Tuncali, Z., Steiner, R. & Chen, W., 2016, In: Frattura ed Integrità Strutturale .

    Research output: Contribution to journal › Article › Research › peer-review

  32. Published

    Multiaxial fatigue assessment of crankshafts by local stress approaches

    Leitner, M., Tuncali, Z., Steiner, R., Chen, W. & Grün, F., 2016.

    Research output: Contribution to conference › Presentation › Research

  33. Published

    Multiaxial fatigue assessment of crankshafts by local stress approaches

    Leitner, M., Tuncali, Z., Steiner, R., Chen, W. & Grün, F., 2016, 11th International Conference on Multiaxial Fatigue & Fracture.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  34. Published

    Stability of HFMI-treatment induced residual stresses during fatigue

    Leitner, M., Khurshid, M. & Barsoum, Z., 2016.

    Research output: Contribution to conference › Presentation › Research

  35. Published

    Stability of HFMI-treatment induced residual stresses during fatigue

    Leitner, M., Khurshid, M. & Barsoum, Z., 2016.

    Research output: Contribution to conference › Paper

  36. Published

    Validation of Experimental Tests and Simulations of Cutting Forces during Woodworking

    Pichler, P., Leitner, M. & Grün, F., 2016, WCCM XII & APCOM VI. p. 1220 1224 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  37. Published

    Validation of Experimental Tests and Simulations of Cutting Forces during Woodworking

    Pichler, P., Leitner, M. & Grün, F., 2016, p. 1220. 1224 p.

    Research output: Contribution to conference › Presentation › Research

  38. 2015
  39. Published

    Fatigue Strength of HFMI-treated and Stress-relief Annealed High-strength Steel Weld Joints: Fatigue Design 2015, International Conference Proceedings, 6th Edition

    Leitner, M., Gerstbrein, S., Ottersböck, M. & Stoschka, M., 31 Dec 2015, In: Procedia Engineering. 133, p. 477-484 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  40. Published

    Schwingfestigkeit ultrahochfester Schweißverbindungen

    Ottersböck, M., Leitner, M. & Stoschka, M., 30 Nov 2015.

    Research output: Contribution to conference › Presentation › Research

  41. Published

    Fatigue crack growth under constant and variable amplitude loading at semi-elliptical and V-notched steel specimens

    Simunek, D., Leitner, M., Maierhofer, J. & Gänser, H.-P., 18 Nov 2015, p. 348-361.

    Research output: Contribution to conference › Presentation › Research › peer-review

  42. Published

    Effect of post-weld heat treatment on the fatigue strength of HFMI-treated mild steel joints

    Leitner, M., Mössler, W., Putz, A. & Stoschka, M., 1 Nov 2015, In: Welding in the world. 59, 6, p. 861-873 13 p.

    Research output: Contribution to journal › Article › Research › peer-review

  43. Accepted/In press

    Effect of local stress state on fatigue strength of welded T-joints

    Ottersböck, M., Leitner, M. & Stoschka, M., 27 Sept 2015, (Accepted/In press) Mathematical Modelling of Weld Phenomena 11. p. 1-19

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  44. Published

    Fatigue strength of welded ultra high-strength steel joints

    Ottersböck, M., Leitner, M., Stoschka, M. & Maurer, W., 3 Jul 2015.

    Research output: Contribution to conference › Paper

  45. Published

    Effect of loading type on welded and HFMI-treated T-joints: XIII-2584-15

    Ottersböck, M., Leitner, M. & Stoschka, M., 29 Jun 2015.

    Research output: Contribution to conference › Paper

  46. Published

    Application of local approaches to assess the fatigue crack: XIII-WG3-36-15

    Stoschka, M., Leitner, M. & Ottersböck, M., 28 Jun 2015. 18 p.

    Research output: Contribution to conference › Presentation › Research

  47. Published

    Study of the support effect of welded high-strength steel joints

    Ottersböck, M., Leitner, M. & Stoschka, M., 5 Mar 2015.

    Research output: Contribution to conference › Presentation › Research

  48. Published

    Stützwirkungseffekt bei der Ermüdungsfestigkeit hochfester Stahlschweißverbindungen

    Ottersböck, M., Leitner, M. & Stoschka, M., 12 Feb 2015.

    Research output: Contribution to conference › Presentation › Research

  49. Published

    Application studies for the fatigue strength improvement of welded structures by high-frequency mechanical impact (HFMI) treatment

    Yildirim, H. C., Leitner, M., Marquis, G. B., Stoschka, M. & Barsoum, Z., 2015.

    Research output: Contribution to conference › Presentation › Research

  50. Published

    Beitrag zur Schwingfestigkeit von HFMI-behandelten Proben und Diskussion lokaler Ansätze zur Bauteilauslegung

    Stoschka, M. & Leitner, M., 2015. 19 p.

    Research output: Contribution to conference › Presentation › Research

  51. Published

    Crack propagation analysis and rehabilitation by HFMI of pre-fatigued welded structures

    Leitner, M., Barsoum, Z. & Schäfers, F., 2015.

    Research output: Contribution to conference › Presentation › Research

  52. Published

    Fatigue assessment of universal cardan joint based on laboratory specimen tests

    Palma, P., Leitner, M. & Grün, F., 2015.

    Research output: Contribution to conference › Paper

  53. Published

    Fatigue crack growth under constant and variable amplitude loading at semi-elliptical and V-notched steel specimens

    Simunek, D., Leitner, M., Maierhofer, J. & Gänser, H.-P., 2015, In: Procedia Engineering. p. 348-361

    Research output: Contribution to journal › Article › Research › peer-review

  54. Published

    Fatigue strength of HFMI-treated high-strength steel joints under constant and variable amplitude block loading

    Leitner, M., Gerstbrein, S., Ottersböck, M. J. & Stoschka, M., 2015, In: Procedia Engineering. 101, p. 251-258 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  55. Published

    Leichtbaupotential geschweißter Strukturen aus hochfestem Stahl

    Leitner, M., 2015, In: Schweiß- & Prüftechnik.

    Research output: Contribution to journal › Article › Research

  56. Published

    Local fatigue assessment of welded and high frequency mechanical impact (HFMI) treated joints by simulation

    Simunek, D., Leitner, M. & Stoschka, M., 2015.

    Research output: Contribution to conference › Poster › Research

  57. Published

    Overview of residual stress measurement and fatigue test data for Pneumatic Impact Treated (PIT) joints

    Schäfers, F., Gerster, P. & Leitner, M., 2015.

    Research output: Contribution to conference › Paper

  58. 2014
  59. E-pub ahead of print

    Ermüdungsfestigkeit hochfester Stahlschweißverbindungen: Fatigue Strength of High-strength Welded Steel Joints

    Leitner, M., Stoschka, M., Ottersböck, M. & Simunek, D., 13 Dec 2014, (E-pub ahead of print) In: Berg- und hüttenmännische Monatshefte : BHM. 160.2015, 1, p. 9-14 6 p.

    Research output: Contribution to journal › Article › Research

  60. Published

    Fatigue strength assessment according to the FKM-guideline in case of non-proportional stresses

    Leitner, B., Fiedler, A. G. & Leitner, M., 1 Sept 2014, In: Konstruktion. 66, 9, p. 76-82 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  61. Published

    A study on the fatigue crack initiation point of longitudinal attachments

    Ottersböck, M., Leitner, M. & Stoschka, M., 17 Mar 2014.

    Research output: Contribution to conference › Presentation › Research

  62. Published

    Fatigue enhancement of thin-walled high-strength steel joints by high frequency mechanical impact treatment

    Leitner, M., Stoschka, M. & Eichlseder, W., 2014, In: Welding in the world. 58, p. 29-39

    Research output: Contribution to journal › Article › Research › peer-review

  63. Published

    FKM-konformer Ermüdungsfestigkeitsnachweis bei nichtproportionalen Beanspruchungen

    Leitner, B., Fiedler, M. & Leitner, M., 2014, In: Konstruktion. 09, p. 76-82

    Research output: Contribution to journal › Article › Research › peer-review

  64. Published

    Forschungsgruppe „Betriebsfestigkeit – Technologische Prozesse“

    Leitner, M., 2014.

    Research output: Contribution to conference › Poster › Research › peer-review

  65. Published

    Integration of Phase-Dependent Work-Hardening into Transient Weld Simulation

    Stoschka, M., Ottersböck, M. & Leitner, M., 2014, Proceedings of the Ninth International Conference on Engineering Computational Technology. p. 1-15

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  66. Published

    Local Fatigue Assessment of Welded and High Frequency Mechanical Impact-Treated Joints based on Manufacturing Process Simulation

    Leitner, M., Simunek, D. & Stoschka, M., 2014, Proceedings of the Ninth International Conference on Engineering Computational Technology. p. 1-16

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  67. Published

    Maschinenbau, Werkstoffkompetenz und Werkstoffanwendung - Tribologische Aufgabenstellungen

    Grün, F., Galler, R., Prenner, M., Supancic, P., Mitterer, C., Ebner, R., Hausberger, A., Schlögl, S., Buchmayr, B., Godor, I., Leitner, M. & Krampl, H., 2014, Tribologie in Industrie und Forschung: Werkstoffe, Konstruktion und Technologie. p. 3-3

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  68. Published

    Maschinenbau, Werkstoffkompetenz und Werkstoffanwendung - Tribologische Aufgabenstellungen

    Grün, F., Galler, R., Prenner, M., Supancic, P., Mitterer, C., Ebner, R., Hausberger, A., Schlögl, S., Buchmayr, B., Godor, I., Leitner, M. & Krampl, H., 2014.

    Research output: Contribution to conference › Presentation › Research

  69. 2013
  70. Published

    Assessment of HFMI post-treated joints by the notch stress approach

    Leitner, M., Stoschka, M. & Eichlseder, W., 2013, Proceedings of the 13th International SF2M Spring Meeting. p. 90-102

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  71. Published

    Comprehensive Investigations of new Filler Materials for Welding of High Strength Steels

    Schnitzer, R., Rauch, R., Ernst, W., Wagner, J., Baumgartner, S., Leitner, M., Stoschka, M., Schlagradl, T., Schneider, R. & Bernhard, C., 2013, Proceedings of the 3rd International Conference. p. 323-332

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  72. Published

    Effect of high-strength filler metals on the fatigue behaviour of butt joints

    Stoschka, M., Leitner, M., Posch, G. & Eichlseder, W., 2013, In: Welding in the world. 57, p. 85-96

    Research output: Contribution to journal › Article › Research › peer-review

  73. Published

    Local fatigue assessment of welded and high frequency mechanical impact (HFMI) treated joints by simulation

    Simunek, D., Leitner, M. & Stoschka, M., 2013.

    Research output: Contribution to conference › Poster › Research › peer-review

  74. Published

    Local fatigue assessment of welded and high frequency mechanical impact treated joints

    Leitner, M., 2013, 127 p.

    Research output: Thesis › Doctoral Thesis

  75. Published

    Numerical simulation loop to investigate the local fatigue behaviour of welded and HFMI-treated joints: XIII-WG2-136-13

    Simunek, D., Leitner, M. & Stoschka, M., 2013

    Research output: Non-textual form › Web publication/site › Research

  76. Published

    Pneumatic Impact Treatment (PIT) – Application and Quality Assurance: XIII-WG2-138-13

    Gerster, P., Schäfers, F. & Leitner, M., 2013

    Research output: Non-textual form › Web publication/site › Research

  77. Published

    Schadensanalyse eines Chippo Klingenhalters

    Mösenbacher, A., Leitner, M. & Godor, I., 2013

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  78. Published

    Studie des transienten Verfestigungsverhaltens für ein- und mehrlagige Verbindungen

    Stoschka, M., Ottersböck, M. & Leitner, M., 2013, Proceedings of the Simulation Forum FWS 2013. p. 1-10

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  79. Published

    Study of the local notch stress HFMI master S/N-curve approach on high-strength steel joints

    Stoschka, M., Leitner, M. & Barsoum, Z., 2013, Proceedings of the 2nd Swedish Conference on Design and Fabrication of Welded Structures. p. 76-90

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  80. 2012
  81. Published

    Contribution to the fatigue enhancement of thin-walled, high-strength steel joints by high frequency mechanical impact treatment: IIW-Document XIII-2416-12

    Leitner, M., Stoschka, M. & Eichlseder, W., 2012

    Research output: Non-textual form › Web publication/site › Research

  82. Published

    EFFECT OF HIGH-STRENGTH FILLER METALS ON FATIGUE

    Stoschka, M., Leitner, M., Fössl, T. & Posch, G., 2012, In: Welding in the world. 56, 3-4, p. 20-29

    Research output: Contribution to journal › Article › Research › peer-review

  83. Published

    Fatigue assessment of welded high-strength steel joints using the local notch stress approach

    Simunek, D., Leitner, M. & Stoschka, M., 2012.

    Research output: Contribution to conference › Poster › Research › peer-review

  84. Published

    Herstellung von Panzerschichten mit Hartstoffpartikeln auf MSG-Basis

    Barwart, S., Leitner, M. & Oberwinkler, C., 2012, In: Tribologie und Schmierungstechnik. p. 19-23

    Research output: Contribution to journal › Article › Research › peer-review

  85. Published

    Influence of hard facing layers on structural fatigue behaviour

    Barwart, S., Leitner, M. & Oberwinkler, C., 2012, Proceedings of the 3rd Fatigue Symposium. p. 1-7

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  86. Published

    Influence of High Frequency Peening on Fatigue of High-Strength Steels

    Leitner, M., Stoschka, M., Schanner, R. & Eichlseder, W., 2012, In: FME transactions.

    Research output: Contribution to journal › Article › Research › peer-review

  87. Published

    Influence of steel grade on the fatigue strength enhancement by high frequency peening technology on longitudinal fillet weld gusset

    Leitner, M. & Stoschka, M., 2012, In: Journal of Engineering and Technology. 1, 3, p. 80-90 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  88. Published

    Local fatigue behaviour of welded joints

    Leitner, M., Stoschka, M. & Barwart, S., 2012, Lightweight Design. p. 73-84

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  89. Published

    New developed filler metals for welding of high strength steels

    Schnitzer, R., Leitner, M., Fiedler, M. & Stoschka, M., 2012, Proceedings to the 2nd International Welding and Joining Technologies Congress and 19th Technical Welding Sessions. p. 1-12

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  90. Published

    Praktische Anwendungen eines höherfrequenten Hämmerverfahrens (PIT) in der Industrie

    Gerster, P., Leitner, M. & Stoschka, M., 2012, Tagungsband. p. 1-11

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  91. Published

    Quality testing of high-strength filler metals in regard to technical cracking – Part 1: IIW-II-C-438-11

    Stoschka, M., Leitner, M., Schnitzer, R. & Schörghuber, M., 2012

    Research output: Non-textual form › Web publication/site › Research

  92. Published

    Schwingfestigkeit hochfester Stähle an geschweißten Strukturen

    Leitner, M., Stoschka, M., Fössl, T. & Eichlseder, W., 2012, In: Schweiß- & Prüftechnik. p. 12-17

    Research output: Contribution to journal › Article › Research › peer-review

  93. Published

    Topology optimization of a light-weight harvester head focussing on the delimbing knife unit

    Oppliger, F., Leitner, M. & Stoschka, M., 2012.

    Research output: Contribution to conference › Poster › Research › peer-review

  94. 2011
  95. Published

    A New Method to Describe Aspects of Welding Parameters on Fatigue Behaviour of High-Strength Steels

    Fössl, T., Leitner, M. & Eichlseder, W., 2011, Processing, Performance and Failure Analysis of Engineering Materials (ICF). p. 105-112

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  96. Published

    Contribution to the capability of filler metals to influence fatigue of butt joints: IIW_II-1775-11

    Stoschka, M., Leitner, M., Fössl, T. & Posch, G., 2011

    Research output: Non-textual form › Web publication/site › Transfer

  97. Published

    Evaluation of fillet weld properties and fatigue behaviour in dependence of welding parameters

    Leitner, M., Foessl, T., Stoschka, M. & Eichlseder, W., 2011, In: Archives of civil and mechanical engineering. 11, 3, p. 651-660

    Research output: Contribution to journal › Article › Research › peer-review

  98. Published

    Fatigue Behaviour of High-Strength Steels using an Optimized Welding Process and High Frequency Peening Technology

    Leitner, M., Stoschka, M., Schörghuber, M. & Eichlseder, W., 2011, Global Trends in Joining Cutting and Surfacing Technology. p. 729-736

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  99. Published

    Herstellung und Charakterisierung von Verschleißschutzschichten mit Hartstoffpartikeln auf MSG-Basis

    Barwart, S., Leitner, M., Chladil, K. & Oberwinkler, C., 2011, Tagungsband. p. 1-8

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  100. Published

    Lifetime Enhancement of Welded High-Strength Steel Joints by High Frequency Peening Technology

    Leitner, M., Stoschka, M., Schanner, R. & Eichlseder, W., 2011.

    Research output: Contribution to conference › Poster › Research › peer-review

  101. Published

    Lifetime Enhancement of Welded High-Strength Steel Joints by High Frequency Peening Technology

    Leitner, M., Stoschka, M., Schanner, R. & Eichlseder, W., 2011, 28th Danubia-Adria Symposium on Advances in Experimental Mechanics. p. 59-60

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  102. 2010
  103. Published

    Application of fatigue approaches on fillet welds of high strength steel

    Stoschka, M., Leitner, M., Fössl, T., Leitner, H. & Eichlseder, W., 2010, In: Materialwissenschaft und Werkstofftechnik. 41, p. 961-971

    Research output: Contribution to journal › Article › Research › peer-review

  104. Published

    Contribution to the capability of filler metals to influence pulsating fatique life: II-C-402-10 II-1742

    Stoschka, M., Fössl, T., Leitner, M. & Posch, G., 2010

    Research output: Non-textual form › Web publication/site › Transfer

  105. Published

    Contribution to the Use of Local Fatigue Approaches Focussing on Finishes of Complete Welds

    Stoschka, M., Leitner, M., Fössl, T. & Schanner, R., 2010,

    63rd Annual Assembly & International Conference of the International Institute of Welding

    .     p. 245-252

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  106. Published

    Evaluation of fillet weld properties in dependence of weld manufacturing parameters

    Fössl, T., Leitner, M. & Eichlseder, W., 2010, 27th Danubia-Adria Symposium. p. 78-79

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  107. Published

    Steigerung der Schwingfestigkeit geschweißter Strukturen durch die Pneumatic Impact Technology (PIT)

    Leitner, M., Fössl, T. & Stoschka, M., 2010.

    Research output: Contribution to conference › Poster › Research › peer-review

  108. 2009
  109. Published

    Comparison of gear tooth root stresses by analytical, numerical and experimental evaluation

    Leitner, M., Haberer, C. & Eichlseder, W., 2009, 26th Danubia-Adria Symposium on Advances in Experimental Mechanics. p. 269-270

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

Previous 1 2 3 Next
View graph of relations

Latest Research Output

View more (204)