Jürgen Eckert

301 - 400 out of 452Page size: 100

Research output

  1. 2017
  2. Published

    Additive Manufacturing Processes: Selective Laser Melting, Electron Beam Melting and Binder Jetting—Selection Guidelines

    Prashanth, K. G., Kolla, S. & Eckert, J., 19 Jun 2017, In: Materials. 10.2017, 6, 12 p., 672.

    Research output: Contribution to journal › Article › Research › peer-review

  3. Published

    Corrosion properties of high-strength nanocrystalline Al84Ni7Gd6Co3 alloy produced by hot pressing of metallic glass

    Wang, Z., Scudino, S., Prashanth, K. G. & Eckert, J., Jun 2017, In: Journal of alloys and compounds. 707.2017, 15 June, p. 63-67 5 p.

    Research output: Contribution to journal › Article › Research › peer-review

  4. Published

    Formation of metastable cellular microstructures in selective laser melted alloys

    Prashanth, K. G. & Eckert, J., Jun 2017, In: Journal of alloys and compounds. 707.2017, 15 June, p. 27-34 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  5. Published

    Probing the dynamics of complexed local anesthetics via neutron scattering spectroscopy and DFT calculations

    Martins, M. L., Eckert, J., Jacobsen, H., dos Santos, É. C., Ignazzi, R., de Araujo, D. R., Bellissent-Funel, M.-C., Natali, F., Koza, M. M., Matic, A., de Paula, E. & Bordallo, H. N., 30 May 2017, In: International Journal of Pharmaceutics. 524.2017, 1-2, p. 397-406 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  6. Published

    Glass-forming ability and microstructural evolution of [(Fe0.6Co0.4)(0.75)Si0.05B0.20](96-x)Nb4Mx metallic glasses studied by Mössbauer spectroscopy

    Torrens-Serra, J., Bruna, P., Stoica, M. & Eckert, J., 15 May 2017, In: Journal of alloys and compounds. 704.2017, 15 May, p. 748-759 12 p.

    Research output: Contribution to journal › Article › Research › peer-review

  7. Published

    Dichlorosilane-derived nano-silicon inside hollow carbon spheres as a high-performance anode for Li-ion batteries

    Jaumann, T., Gerwig, M., Balach, J., Oswald, S., Brendler, E., Hauser, R., Kieback, B., Eckert, J., Giebeler, L. & Kroke, E., May 2017, In: Journal of Materials Chemistry A. 5.2017, 19, p. 9262-9271 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  8. Published

    Structural, elastic and electronic properties of CoZr in B2 and B33 structures under high pressure

    Lu, W. F., Li, C. J., Sarac, B., Şopu, D., Yi, J. H., Tan, J., Stoica, M. & Eckert, J., May 2017, In: Journal of alloys and compounds. 705.2017, 25 May, p. 445-455 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  9. E-pub ahead of print

    Microstructure and abrasive wear behavior of a novel FeCrMoVC laser cladding alloy for high-performance tool steels

    Zeisig, J., Schädlich, N., Giebeler, L., Sander, J., Eckert, J., Kühn, U. & Hufenbach, J., 26 Apr 2017, (E-pub ahead of print) In: Wear. 382-383.2017, 15 July, p. 107-112 6 p.

    Research output: Contribution to journal › Article › Research › peer-review

  10. Published

    Mechanochemical synthesis of nanostructured metal nitrides, carbonitrides and carbon nitride: a combined theoretical and experimental study

    Rounaghi, S. A., Vanpoucke, D. E. P., Eshghi, H., Scudino, S., Esmaeili, E., Oswald, S. & Eckert, J., 19 Apr 2017, In: Physical chemistry, chemical physics : PCCP. 2017, 19, p. 12414-12424 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  11. Published

    Effect of replacing Nb with (Mo and Zr) on glass forming ability, magnetic and mechanical properties of FeCoBSiNb bulk metallic glass

    Ramasamy, P., Stoica, M., Bera, S., Calin, M. & Eckert, J., 14 Apr 2017, In: Journal of alloys and compounds. 707.2017, 15 June, p. 78-81 4 p.

    Research output: Contribution to journal › Article › Research › peer-review

  12. Published

    Hierarchical surface patterning of Ni- and Be-free Ti- and Zr-based bulk metallic glasses by thermoplastic net-shaping

    Sarac, B., Bera, S., Balakin, S., Stoica, M., Calin, M. & Eckert, J., 1 Apr 2017, In: Materials science and engineering C (Biomimetic and supramolecular systems). 73.2017, 1 April, p. 398-405 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  13. Published

    Micro-patterning by thermoplastic forming of Ni-free Ti-based bulk metallic glasses

    Bera, S., Sarac, B., Balakin, S., Ramasamy, P., Stoica, M., Calin, M. & Eckert, J., Apr 2017, In: Materials and Design. 120.2017, 15 April, p. 204-211 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  14. Published

    Transient nucleation and microstructural design in flash-annealed bulk metallic glasses

    Kosiba, K., Scudino, S., Kobold, R., Kühn, U., Greer, A. L., Eckert, J. & Pauly, S., Apr 2017, In: Acta Materialia. 127.2017, 1 April, p. 416-425 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  15. E-pub ahead of print

    Deformation Behavior of Powder Metallurgy Connecting Rod Preform During Hot Forging Based on Hot Compression and Finite Element Method Simulation

    Li, F., Yi, J. & Eckert, J., 28 Mar 2017, (E-pub ahead of print) In: Metallurgical and materials transactions. A, Physical metallurgy and materials science . 48.2017, 6, p. 2971-2978 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  16. Published

    Influence of the Ag concentration on the medium-range order in a CuZrAlAg bulk metallic glass

    Gammer, C., Escher, B., Ebner, C., Minor, A. M., Karnthaler, H.-P., Eckert, J., Pauly, S. & Rentenberger, C., 21 Mar 2017, In: Scientific reports (London : Nature Publishing Group). 7.2017, 7 p., 44903.

    Research output: Contribution to journal › Article › Research › peer-review

  17. E-pub ahead of print

    Mechanism of formation of fibrous eutectic Si and thermal conductivity of SiCp/Al-20Si composites solidified under high pressure

    Ma, P., Wei, Z. J., Jia, Y., Yu, Z. S., Prashanth, K. G., Yang, S. L., Li, C. G., Huang, L. X. & Eckert, J., 16 Mar 2017, (E-pub ahead of print) In: Journal of alloys and compounds. 709.2017, 30 June, p. 329-336 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  18. Published

    Hysteretic behavior of soft magnetic elastomer composites

    Krautz, M., Werner, D., Schrödner, M., Funk, A., Jantz, A., Popp, J., Eckert, J. & Waske, A., 15 Mar 2017, In: Journal of magnetism and magnetic materials. 426.2017, 15 March, p. 60-63 4 p.

    Research output: Contribution to journal › Article › Research › peer-review

  19. Published

    Thermal stability and latent heat of Nb–rich martensitic Ti-Nb alloys

    Bönisch, M., Panigrahi, A., Calin, M., Waitz, T., Zehetbauer, M., Skrotzki, W. & Eckert, J., 15 Mar 2017, In: Journal of alloys and compounds. 697.2017, 15 March, p. 300-309 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  20. Published

    Is the energy density a reliable parameter for materials synthesis by selective laser melting?

    Prashanth, K. G., Scudino, S., Maity, T., Das, J. & Eckert, J., 9 Mar 2017, In: Materials Research Letters [Elektronische Ressource]. 5.2017, 6, p. 386-390 5 p.

    Research output: Contribution to journal › Article › Research › peer-review

  21. E-pub ahead of print

    β-type Ti-based bulk metallic glass composites with tailored structural metastability

    Zhang, L., Zhang, H., Li, W., Gemming, T., Wang, P., Bönisch, M., Şopu, D., Eckert, J. & Pauly, S., 9 Mar 2017, (E-pub ahead of print) In: Journal of alloys and compounds. 708.2017, June, p. 972-981 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  22. Published

    Ab-initio and experimental study of phase stability of Ti-Nb alloys

    Gutiérrez Moreno, J. J., Bönisch, M., Panagiotopoulos, N. T., Calin, M., Papageorgiou, D. G., Gebert, A., Eckert, J., Evangelakis, G. A. & Lekka, C. E., 5 Mar 2017, In: Journal of alloys and compounds. 696.2017, 5 March, p. 481-489 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  23. Published

    Defining the tensile properties of Al-12Si parts produced by selective laser melting

    Prashanth, K. G., Scudino, S. & Eckert, J., 1 Mar 2017, In: Acta materialia. 126.2017, March, p. 25-35 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  24. Published

    Rapid fabrication of function-structure-integrated NiTi alloys: Towards a combination of excellent superelasticity and favorable bioactivity

    Zhang, L., He, Z., Tan, J., Zhang, Y., Stoica, M., Prashanth, K. G., Cordill, M., Jiang, Y. H., Zhou, R. & Eckert, J., 1 Mar 2017, In: Intermetallics. 82.2017, March, p. 1-13 13 p.

    Research output: Contribution to journal › Article › Research › peer-review

  25. Published

    Structure of glassy Cu47.5Zr47.5Ag5 investigated with neutron diffraction with isotopic substitution, X-ray diffraction, EXAFS and reverse Monte Carlo simulation

    Jóvári, P., Kaban, I., Escher, B., Song, K. K., Eckert, J., Beuneu, B., Webb, M. A. & Chen, N., 1 Mar 2017, In: Journal of non-crystalline solids. 459.2017, 1 March, p. 99-102 4 p.

    Research output: Contribution to journal › Article › Research › peer-review

  26. Published

    Deformation Mechanisms in Magnetron Sputtered Thin Film Metallic Glasses

    Mühlbacher, M., Gammer, C., Konetschnik, R., Schöberl, T., Mitterer, C. & Eckert, J., Mar 2017.

    Research output: Contribution to conference › Poster › Research

  27. Published

    Nanoindentation and wear properties of Ti and Ti-TiB composite materials produced by selective laser melting

    Attar, H., Ehtemam-Haghighi, S., Kent, D., Okulov, I. V., Wendrock, H., Bönisch, M., Volegov, A. S., Calin, M., Eckert, J. & Dargusch, M. S., Mar 2017, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 688, p. 20-26 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  28. Published

    Additive Manufacturing: Reproducibility of Metallic Parts

    Prashanth, K. G., Scudino, S., Chatterjee, R. P., Salman, O. & Eckert, J., 18 Feb 2017, In: Technologies. 5.2017, 1, 7 p., 8.

    Research output: Contribution to journal › Article › Research › peer-review

  29. Published

    Local melting to design strong and plastically deformable bulk metallic glass composites

    Qin, Y., Han, X., Song, K. K., Tian, Y. H., Peng, C. X., Wang, L., Sun, B., Wang, G., Kaban, I. & Eckert, J., 13 Feb 2017, In: Scientific reports (London : Nature Publishing Group). 7.2017, 10 p., 42518.

    Research output: Contribution to journal › Article › Research › peer-review

  30. Published

    Influence of testing orientation on mechanical properties of Ti45Nb deformed by high pressure torsion

    Völker, B., Jäger, N., Calin, M., Zehetbauer, M. J., Eckert, J. & Hohenwarter, A., 15 Jan 2017, In: Materials & design. 114.2017, 15 January, p. 40-46 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  31. Published

    Micro-to-nano-scale deformation mechanism of a Ti-based dendritic-ultrafine eutectic alloy exhibiting large tensile ductility

    Okulov, I. V., Bönisch, M., Volegov, A. S., Shahabi, H. S., Wendrock, H., Gemming, T. & Eckert, J., 13 Jan 2017, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 682.2017, 13 January, p. 673-678 6 p.

    Research output: Contribution to journal › Article › Research › peer-review

  32. Published

    Introduction

    Messing, G. L., Eckert, J. & Schadler, L. S., 12 Jan 2017, In: Journal of materials research (JMR). 32.2017, 1, p. 1 1 p.

    Research output: Contribution to journal › Letter › peer-review

  33. Published

    Deformation mechanisms to ameliorate the mechanical properties of novel TRIP/TWIP Co-Cr-Mo-(Cu) ultrafine eutectic alloys

    Kim, J. T., Hong, S. H., Park, H. J., Kim, Y. S., Suh, J. Y., Lee, J. K., Park, J. M., Maity, T., Eckert, J. & Kim, K. B., 9 Jan 2017, In: Scientific reports (London : Nature Publishing Group). 7.2017, 13 p., 39959.

    Research output: Contribution to journal › Article › Research › peer-review

  34. E-pub ahead of print

    Designing a novel functional-structural NiTi/hydroxyapatite composite with enhanced mechanical properties and high bioactivity

    Zhang, L., He, Z. Y., Tan, J., Zhang, Y. Q., Stoica, M., Calin, M., Prashanth, K. G., Cordill, M., Jiang, Y. H., Zhou, R. & Eckert, J., 5 Jan 2017, (E-pub ahead of print) In: Intermetallics. 84.2017, May, p. 35-41 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  35. E-pub ahead of print

    Microstructure and thermal expansion behavior of Al-50Si synthesized by selective laser melting

    Jia, Y., Ma, P., Prashanth, K. G., Wang, G., Yi, J., Scudino, S., Cao, F., Sun, J. & Eckert, J., 2 Jan 2017, (E-pub ahead of print) In: Journal of alloys and compounds. 699.2017, 30 March, p. 548-553 6 p.

    Research output: Contribution to journal › Article › Research › peer-review

  36. Published

    Lifetime vs. rate capability: Understanding the role of FEC and VC in high-energy Li-ion batteries with nano-silicon anodes

    Jaumann, T., Balach, J., Langklotz, U., Sauchuk, V., Fritsch, M., Michaelis, A., Teltevskij, V., Mikhailova, D., Oswald, S., Klose, M., Stephani, G., Hauser, R., Eckert, J. & Giebeler, L., 1 Jan 2017, In: Energy Storage Materials. 6.2017, January, p. 26-35 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  37. Published

    Microstructure, mechanical behavior, and wear properties of FeCrMoVC steel prepared by selective laser melting and casting

    Sander, J., Hufenbach, J., Giebeler, L., Bleckmann, M., Eckert, J. & Kühn, U., 1 Jan 2017, In: Scripta materialia. 126.2017, 1 January, p. 41-44 4 p.

    Research output: Contribution to journal › Article › Research › peer-review

  38. Published

    Self-Terminating Confinement Approach for Large-Area Uniform Monolayer Graphene Directly over Si/SiOX by Chemical Vapor Deposition

    Pang, J., Mendes, R. G., Wrobel, P. S., Wlodarski, M. D., Ta, H. Q., Zhao, L., Giebeler, L., Trzebicka, B., Gemming, T., Fu, L., Liu, Z., Eckert, J., Bachmatiuk, A. & Ruemmeli, M. H., Jan 2017, In: ACS nano. 11.2017, 2, p. 1946-1956 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  39. Published

    Granulation of bulk metallic glass forming alloys as a feedstock for thermoplastic forming and their compaction into bulk samples

    Geissler, D., Grosse, J., Donath, S., Ehinger, D., Stoica, M., Eckert, J. & Kühn, U., 2017, THERMEC 2016. Trans Tech Publications, Vol. 879. p. 589-594 6 p. (Materials Science Forum; vol. 879).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  40. 2016
  41. Published

    Selective laser melting of ultra-high-strength TRIP steel: processing, microstructure, and properties

    Sander, J., Hufenbach, J., Bleckmann, M., Giebeler, L., Wendrock, H., Oswald, S., Gemming, T., Eckert, J. & Kühn, U., 30 Dec 2016, In: Journal of materials science. 52.2017, 9, p. 4944-4956 13 p.

    Research output: Contribution to journal › Article › Research › peer-review

  42. Published

    Compression behavior of inter-particle regions in high-strength Al84Ni7Gd6Co3 alloy

    Wang, Z., Qu, R. T., Prashanth, K. G., Eckert, J. & Scudino, S., 15 Dec 2016, In: Materials letters. 185.2016, 15 December, p. 25-28 4 p.

    Research output: Contribution to journal › Article › Research › peer-review

  43. Published

    Substitution effect on glass formation of NixCo60−xNb40 alloys

    Ye, S., Zhang, S., Eckert, J. & Yu, P., 15 Dec 2016, In: Materials letters. 185.2016, 15 December, p. 541-544 4 p.

    Research output: Contribution to journal › Article › Research › peer-review

  44. Published

    Tensile Properties of Al-12Si Fabricated via Selective Laser Melting (SLM) at Different Temperatures

    Prashanth, K. G., Scudino, S. & Eckert, J., 2 Dec 2016, In: Technologies. 4.2016, 4, 9 p., 38.

    Research output: Contribution to journal › Article › Research › peer-review

  45. E-pub ahead of print

    Cryogenic-temperature-induced structural transformation of a metallic glass

    Bian, X., Wang, G., Wang, Q., Sun, B., Hussain, I., Zhai, Q., Mattern, N., Bednarčík, J. & Eckert, J., 30 Nov 2016, (E-pub ahead of print) In: Materials Research Letters [Elektronische Ressource]. 5.2017, 4, p. 284-291 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  46. Published

    Mapping Local Strain Fields during In Situ TEM Deformation

    Eckert, J., 29 Nov 2016.

    Research output: Contribution to conference › Presentation › Research › peer-review

  47. Published

    Effect of Particle Size on Microstructure and Mechanical Properties of Al-Based Composite Reinforced with 10 Vol.% Mechanically Alloyed Mg-7.4%Al Particles

    Chaubey, A. K., Prashanth, K. G., Wang, Z., Scudino, S., Mukhopadhyay, N. & Eckert, J., 19 Nov 2016, In: Technologies. 4.2016, 4, 8 p., 37.

    Research output: Contribution to journal › Article › Research › peer-review

  48. E-pub ahead of print

    Selective laser melting of Al-Zn-Mg-Cu: Heat treatment, microstructure and mechanical properties

    Wang, P., Li, H. C., Prashanth, K. G., Eckert, J. & Scudino, S., 16 Nov 2016, (E-pub ahead of print) In: Journal of alloys and compounds. 707.2017, June, p. 287-290 4 p.

    Research output: Contribution to journal › Article › Research › peer-review

  49. Published

    Tailoring Structure Formation and Properties of Complex Metallic Materials

    Eckert, J., 7 Nov 2016.

    Research output: Contribution to conference › Presentation › Research › peer-review

  50. Published

    Mechanochemical Synthesis of Nanostructured Aluminum Nitride

    Eckert, J., 24 Oct 2016.

    Research output: Contribution to conference › Presentation › Research › peer-review

  51. E-pub ahead of print

    Composition optimization of low modulus and high-strength TiNb-based alloys for biomedical applications

    Okulov, I. V., Volegov, A. S., Attar, H., Bönisch, M., Ehtemam-Haghighi, S., Calin, M. & Eckert, J., 20 Oct 2016, (E-pub ahead of print) In: Journal of the Mechanical Behavior of Biomedical Materials. 65.2017, January, p. 866-871 6 p.

    Research output: Contribution to journal › Article › Research › peer-review

  52. Published

    High pressure die casting of Fe-based metallic glass

    Ramasamy, P., Szabo, A., Borzel, S., Eckert, J., Stoica, M. & Bárdos, A., 11 Oct 2016, In: Scientific reports (London : Nature Publishing Group). 6.2016, 11 p., 35258.

    Research output: Contribution to journal › Article › Research › peer-review

  53. Published

    Characterization of 316L Steel Cellular Dodecahedron Structures Produced by Selective Laser Melting

    Prashanth, K. G., Löber, L., Klauß, H., Kühn, U. & Eckert, J., 8 Oct 2016, In: Technologies. 4.2016, 4, 12 p., 34.

    Research output: Contribution to journal › Article › Research › peer-review

  54. Published

    Compositional depth profiling of diamond-like carbon layers by glow discharge optical emission spectroscopy

    Schubert, C. J., Hoffmann, V., Kümmel, A., Sinn, J., Härtel, M., Reuther, A., Thomalla, M., Gemming, T., Eckert, J. & Leyens, C., 6 Oct 2016, In: Journal of analytical atomic spectrometry. 31.2016, 11, p. 2207-2212 6 p.

    Research output: Contribution to journal › Article › Research › peer-review

  55. Published

    Effect of cerium addition on microstructure and mechanical properties of high-strength Fe85Cr4Mo8V2C1 cast steel

    Hufenbach, J., Helth, A., Lee, M. H., Wendrock, H., Giebeler, L., Choe, C. Y., Kim, K. H., Kühn, U., Kim, T. S. & Eckert, J., 30 Sept 2016, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 674.2016, 30 September, p. 366-374 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  56. Published

    Mechanical and Corrosion Behavior of New Generation Ti-45Nb Porous Alloys Implant Devices

    Prashanth, K. G., Zhuravleva, K., Okulov, I. V., Calin, M., Eckert, J. & Gebert, A., 30 Sept 2016, In: Technologies. 4.2016, 4, 12 p., 33.

    Research output: Contribution to journal › Article › Research › peer-review

  57. Published

    Correlation between structural heterogeneity and plastic deformation for phase separating FeCu metallic glasses

    Peng, C. X., Song, K., Wang, L., Şopu, D., Pauly, S. & Eckert, J., 29 Sept 2016, In: Scientific reports (London : Nature Publishing Group). 6.2016, 11, 11 p., 34340.

    Research output: Contribution to journal › Article › Research › peer-review

  58. Published

    Mechanochemical route to the synthesis of nanostructured Aluminium nitride

    Rounaghi, S. A., Eshghi, H., Scudino, S., Vyalikh, A., Vanpoucke, D. E. P., Gruner, W., Oswald, S., Kiani Rashid, A. R., Khoshkhoo, M. S., Scheler, U. & Eckert, J., 21 Sept 2016, In: Scientific reports (London : Nature Publishing Group). 6.2016, 11 p., 33375.

    Research output: Contribution to journal › Article › Research › peer-review

  59. Published

    Influence of Ag and Co additions on glass-forming ability, thermal and mechanical properties of Cu–Zr–Al bulk metallic glasses

    Escher, B., Kühn, U., Eckert, J., Rentenberger, C. & Pauly, S., 15 Sept 2016, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 673.2016, 15 September, p. 90-98 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  60. Published

    Microstructure and thermal conductivity of hypereutectic Al-high Si produced by casting and spray deposition

    Jia, Y., Cao, F., Ma, P., Scudino, S., Eckert, J., Sun, J. & Wang, G., 6 Sept 2016, In: Journal of materials research (JMR). 31.2016, 19, p. 2948-2955 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  61. Published

    Tailoring Structure Formation and Properties of Glass-Forming Systems

    Eckert, J., 6 Sept 2016.

    Research output: Contribution to conference › Presentation › Research › peer-review

  62. Published

    Microstructure and mechanical properties of the near-beta titanium alloy Ti-5553 processed by selective laser melting

    Schwab, H., Palm, F., Kühn, U. & Eckert, J., 5 Sept 2016, In: Materials & design. 105.2016, 5 September, p. 75-80 6 p.

    Research output: Contribution to journal › Article › Research › peer-review

  63. Published

    Hierarchically nanostructured hollow carbon nanospheres for ultra-fast and long-life energy storage

    Klose, M., Reinhold, R., Pinkert, K., Uhlemann, M., Wolke, F., Balach, J., Jaumann, T., Stoeck, U., Eckert, J. & Giebeler, L., 1 Sept 2016, In: Carbon. 106.2016, September, p. 306-313 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  64. E-pub ahead of print

    Ideal shear banding in metallic glass

    Wang, J. G., Ke, H. B., Pan, Y., Chan, K. C., Wang, W. H. & Eckert, J., 1 Sept 2016, (E-pub ahead of print) In: Philosophical magazine. 96.2016, 30, p. 3159-3176 18 p.

    Research output: Contribution to journal › Article › Research › peer-review

  65. Published

    Influence of ejection temperature on structure and glass transition behavior for Zr-based rapidly quenched disordered alloys

    Wang, X., Inoue, A., Kong, F. L., Zhu, S., Stoica, M., Kaban, I., Chang, C. T., Shalaan, E., Al-Marzouki, F. & Eckert, J., 1 Sept 2016, In: Acta materialia. 116.2016, 1 September, p. 370-381 12 p.

    Research output: Contribution to journal › Article › Research › peer-review

  66. Published

    Formation and phase evolution of liquid phase-separated metallic glasses with double glass transition, crystallization and melting

    Qin, Y., Shi, Y., Han, X., Song, K., Cao, C. D., Li, X. L., Wang, S., He, J., Wang, L., Kaban, I. & Eckert, J., Sept 2016, In: Materials Today Communications. 8.2016, September, p. 64-71 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  67. Published

    Simultaneous enhancements of strength and toughness in an Al-12Si alloy synthesized using selective laser melting

    Suryawanshi, J., Prashanth, K. G., Scudino, S., Eckert, J., Prakash, O. & Ramamurty, U., 15 Aug 2016, In: Acta materialia. 115.2016, 15 August, p. 285-294 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  68. E-pub ahead of print

    Effect of thermomechanical processing on the mechanical biofunctionality of a low modulus Ti-40Nb alloy

    Helth, A., Pilz, S., Kirsten, T., Giebeler, L., Freudenberger, J., Calin, M., Eckert, J. & Gebert, A., 13 Aug 2016, (E-pub ahead of print) In: Journal of the Mechanical Behavior of Biomedical Materials. 65.2017, January, p. 137-150 14 p.

    Research output: Contribution to journal › Article › Research › peer-review

  69. Published

    A comparative study on the isochronal and isothermal crystallization kinetics of Co46.45Fe25.55Ta8B20 soft magnetic metallic glass with high thermal stability

    Taghvaei, A. H. & Eckert, J., 5 Aug 2016, In: Journal of alloys and compounds. 675.2016, 5 August, p. 223-230 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  70. E-pub ahead of print

    Negentropic stabilization of metastable β-Ti in bulk metallic glass composites

    Zhang, L., Zhang, H., Li, W., Gemming, T., Zhu, Z., Fu, H., Eckert, J. & Pauly, S., 4 Aug 2016, (E-pub ahead of print) In: Scripta materialia. 125.2016, December, p. 19-23 5 p.

    Research output: Contribution to journal › Article › Research › peer-review

  71. Published

    Structural evolution and strength change of a metallic glass at different temperatures

    Tong, X., Wang, G., Stachurski, Z. H., Bednarčík, J., Mattern, N., Zhai, Q. J. & Eckert, J., 3 Aug 2016, In: Scientific reports (London : Nature Publishing Group). 2016, 6, 12 p., 30876.

    Research output: Contribution to journal › Article › Research › peer-review

  72. Published

    Effect of reinforcement phase on the mechanical property of tungsten nanocomposite synthesized by spark plasma sintering

    Lee, J. K., Kim, S. Y., Ott, R. T., Kim, J. Y., Eckert, J. & Lee, M. H., 17 Jul 2016, In: International journal of refractory metals & hard materials. 54.2016, January, p. 14-18 5 p., 4109.

    Research output: Contribution to journal › Article › Research › peer-review

  73. Published

    Brittle-to-ductile transition in metallic glass nanowires

    Şopu, D., Foroughi, A., Stoica, M. & Eckert, J., 13 Jul 2016, In: Nano Letters. 16.2016, 7, p. 4467-4471 5 p.

    Research output: Contribution to journal › Article › Research › peer-review

  74. Published

    Designing plasticity in metallic glasses

    Eckert, J., 6 Jul 2016.

    Research output: Contribution to conference › Presentation › Research › peer-review

  75. Published

    Influence of processing parameters on the fabrication of a Cu-Al-Ni-Mn shape-memory alloy by selective laser melting

    Gustmann, T., Neves, A., Kühn, U., Gargarella, P., Kiminami, C. S., Bolfarini, C., Eckert, J. & Pauly, S., 1 Jul 2016, In: Additive Manufacturing. 11.2016, July, p. 23-31 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  76. Published

    Layered-to-Tunnel Structure Transformation and Oxygen Redox Chemistry in LiRhO2 upon Li Extraction and Insertion

    Mikhailova, D., Karakulina, O. M., Batuk, D., Hadermann, J., Abakumov, A. M., Herklotz, M., Tsirlin, A. A., Oswald, S., Giebeler, L., Schmidt, M., Eckert, J., Knapp, M. & Ehrenberg, H., 1 Jul 2016, In: Inorganic chemistry. 55.2016, 14, p. 7079-7089 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  77. E-pub ahead of print

    Interplay of the Open Circuit Potential-Relaxation and the Dissolution Behavior of a Single H2 Bubble Generated at a Pt Microelectrode

    Karnbach, F., Yang, X., Mutschke, G., Fröhlich, J., Eckert, J., Gebert, A., Tschulik, K., Eckert, K. & Uhlemann, M., 29 Jun 2016, (E-pub ahead of print) In: Journal of physical chemistry C (C, Nanomaterials and interfaces). 120.2016, 28, p. 15137-15146 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  78. Published

    High Area Capacity Lithium-Sulfur Full-cell Battery with Prelitiathed Silicon Nanowire-Carbon Anodes for Long Cycling Stability

    Krause, A., Dörfler, S., Piwko, M., Wisser, F. M., Jaumann, T., Ahrens, E., Giebeler, L., Althues, H., Schädlich, S., Grothe, J., Jeffery, A., Grube, M., Brückner, J., Martin, J., Eckert, J., Kaskel, S., Mikolajick, T. & Weber, W. M., 20 Jun 2016, In: Scientific reports (London : Nature Publishing Group). 2016, 6, 12 p., 27982.

    Research output: Contribution to journal › Article › Research › peer-review

  79. Published

    Towards the Better: Intrinsic Property Amelioration in Bulk Metallic Glasses

    Sarac, B., Zhang, L., Kosiba, K., Pauly, S., Stoica, M. & Eckert, J., 8 Jun 2016, In: Scientific reports (London : Nature Publishing Group). 2016, 6, 8 p., 27271.

    Research output: Contribution to journal › Article › Research › peer-review

  80. Published

    Phase formation and properties of advanced metastable metallic materials

    Eckert, J., 30 May 2016.

    Research output: Contribution to conference › Presentation › Research › peer-review

  81. Published

    Synergistically Enhanced Polysulfide Chemisorption Using a Flexible Hybrid Separator with N and S Dual-Doped Mesoporous Carbon Coating for Advanced Lithium-Sulfur Batteries

    Balach, J., Singh, H. K., Gomoll, S., Jaumann, T., Klose, M., Oswald, S., Richter, M., Eckert, J. & Giebeler, L., 26 May 2016, In: ACS Applied Materials & Interfaces. 8.2016, 23, p. 14586-14595 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  82. Published

    Designing Metastable Phases for High Performance Applications

    Eckert, J., 24 May 2016.

    Research output: Contribution to conference › Presentation › Research › peer-review

  83. Published

    Local microstructure evolution at shear bands in metallic glasses with nanoscale phase separation

    He, J., Kaban, I., Mattern, N., Song, K., Sun, B., Zhao, J., Kim, D. H., Eckert, J. & Greer, A. L., 16 May 2016, In: Scientific reports (London : Nature Publishing Group). 2016, 6, 8 p., 25832.

    Research output: Contribution to journal › Article › Research › peer-review

  84. Published

    Design of Metastable Metallic Alloys

    Eckert, J., 3 May 2016.

    Research output: Contribution to conference › Presentation › Research › peer-review

  85. Published

    Erratum: Processing, microstructure and mechanical properties of Al-based metal matrix composites reinforced with mechanically alloyed particles (Journal of Materials Research DOI:10.1557/jmr.2016.156)

    Chaubey, A. K., Scudino, S., Mukhopadhyay, N. K. & Eckert, J., 1 May 2016, In: Journal of materials research (JMR). 31.2016, 9, p. 1372 1 p.

    Research output: Contribution to journal › Comment/debate › peer-review

  86. Published

    Processing, microstructure and mechanical properties of Al-based metal matrix composites reinforced with mechanically alloyed particles

    Chaubey, A. K., Scudino, S., Mukhopadhyay, N. K. & Eckert, J., 1 May 2016, In: Journal of materials research (JMR). 31.2016, 9, p. 1229-1236 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  87. Published

    Thermal oxidation behavior of glass-forming Ti-Zr-(Nb)-Si alloys

    Abdi, S., Bönisch, M., Oswald, S., Khoshkhoo, M. S., Gruner, W., Lorenzetti, M., Wolff, U., Calin, M., Eckert, J. & Gebert, A., 1 May 2016, In: Journal of materials research (JMR). 31.2016, 9, p. 1264-1274 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  88. Published

    Laser surface remelting of a Cu-Al-Ni-Mn shape memory alloy

    da Silva, M. R., Gargarella, P., Gustmann, T., Botta Filho, W. J., Kiminami, C. S., Eckert, J., Pauly, S. & Bolfarini, C., 20 Apr 2016, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 661.2016, 20 April, p. 61-67 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  89. Published

    Glass-forming ability, thermal stability of B2 CuZr phase, and crystallization kinetics for rapidly solidified Cu-Zr-Zn alloys

    Wu, D. Y., Song, K., Gargarella, P., Cao, C. D., Li, R., Kaban, I. & Eckert, J., 15 Apr 2016, In: Journal of alloys and compounds. 664.2016, 15 April, p. 99-108 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  90. Published

    Werkstoffdesign auf der Basis metastabiler Phasen

    Eckert, J., 11 Apr 2016.

    Research output: Contribution to conference › Presentation › Research › peer-review

  91. Published

    Auger and X-ray photoelectron spectroscopy on lithiated HOPG

    Hoffmann, M. J., Oswald, S., Zier, M. & Eckert, J., 8 Apr 2016, In: Surface and interface analysis. 48.2016, 7, p. 501-504 4 p.

    Research output: Contribution to journal › Article › Research › peer-review

  92. Published

    Improving the glass-forming ability and plasticity of a TiCu-based bulk metallic glass composite by minor additions of Si

    Gargarella, P., Pauly, S., Khoshkhoo, M. S., Kiminami, C. S., Kühn, U. & Eckert, J., 5 Apr 2016, In: Journal of alloys and compounds. 663.2016, 5 April, p. 531-539 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  93. Published

    A study of the micro- and nanoscale deformation behavior of individual austenitic dendrites in a FeCrMoVC cast alloy using micro- and nanoindentation experiments

    Zeisig, J., Hufenbach, J., Wendrock, H., Gemming, T., Eckert, J. & Kühn, U., 4 Apr 2016, In: Applied physics letters. 108.2016, 14, 143103.

    Research output: Contribution to journal › Article › Research › peer-review

  94. E-pub ahead of print

    Mapping of residual strains around a shear band in bulk metallic glass by nanobeam X-ray diffraction

    Shakur Shahabi, H., Scudino, S., Kaban, I., Stoica, M., Escher, B., Menzel, S., Bm Vaughan, G., Kühn, U. & Eckert, J., 1 Apr 2016, (E-pub ahead of print) In: Acta materialia. 111.2016, 1 June, p. 187-193 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  95. E-pub ahead of print

    Analysis of the thermal and temporal stability of Ta and Ti thin films onto SAW–substrate materials (LiNbO3 and LiTaO3) using AR-XPS

    Vogel, U., Gemming, T., Eckert, J. & Oswald, S., 30 Mar 2016, (E-pub ahead of print) In: Surface and interface analysis. 48.2016, 7, p. 570-574 5 p.

    Research output: Contribution to journal › Article › Research › peer-review

  96. E-pub ahead of print

    Electrochemical deposition of hydroxyapatite on beta-Ti-40Nb

    Schmidt, R., Hoffmann, V., Helth, A., Gostin, P. F., Calin, M., Eckert, J. & Gebert, A., 26 Mar 2016, (E-pub ahead of print) In: Surface & coatings technology. 294.2016, 25 May, p. 186-193 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  97. E-pub ahead of print

    Low Young's modulus Ti-based porous bulk glassy alloy without cytotoxic elements

    Nicoarǎ, M., Rǎduţǎ, A., Parthiban, R., Locovei, C., Eckert, J. & Stoica, M., 12 Mar 2016, (E-pub ahead of print) In: Acta biomaterialia. 36.2016, May, p. 323-331 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  98. Published

    Anodically fabricated TiO2-SnO2 nanotubes and their application in lithium ion batteries

    Madian, M., Klose, M., Jaumann, T., Gebert, A., Oswald, S., Ismail, N., Eychmüller, A., Eckert, J. & Giebeler, L., 9 Mar 2016, In: Journal of Materials Chemistry A. 4.2016, 15, p. 5542-5552 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  99. Published

    Corrigendum - Low Voltage Transmission Electron Microscopy of Graphene

    Bachmatiuk, A., Zhao, J., Gorantla, S. M., Martinez, I. G. G., Wiedermann, J., Lee, C., Eckert, J. & Rümmeli, M. H., 9 Mar 2016, In: Small. 12.2016, 10, p. 1251 1 p.

    Research output: Contribution to journal › Comment/debate › peer-review

  100. Published

    Bulk Processing of Nanostructured Advanced Materials

    Eckert, J., 7 Mar 2016.

    Research output: Contribution to conference › Presentation › Research › peer-review

  101. Published

    In-situ Quasi-Instantaneous e-beam Driven Catalyst-Free Formation of Crystalline Aluminum Borate Nanowires

    Gonzalez-Martinez, I. G., Gemming, T., Mendes, R. G., Bachmatiuk, A., Bezugly, V., Kunstmann, J., Eckert, J., Cuniberti, G. & Rümmeli, M. H., 3 Mar 2016, In: Scientific reports (London : Nature Publishing Group). 2016, 6, 9 p., 22524.

    Research output: Contribution to journal › Article › Research › peer-review

  102. Published

    Manipulation of free volumes in a metallic glass through Xe-ion irradiation

    Bian, X., Wang, G., Chen, H., Yan, L., Wang, J., Wang, Q., Hu, P. F., Ren, J. L., Chan, K. C., Zheng, N., Teresiak, A., Gao, Y. L., Zhai, Q. J., Eckert, J., Beadsworth, J., Dahmen, K. A. & Liaw, P. K., 1 Mar 2016, In: Acta materialia. 106.2016, March, p. 66-77 12 p.

    Research output: Contribution to journal › Article › Research › peer-review

Previous 1 2 3 4 5 Next
View graph of relations

Latest Research Output

View more (452)