Helmut Clemens
(Former)
Research output
- 2016
- Published
On the chemistry of the carbides in a molydbenum base Mo-Hf-C alloy produced by powder metallurgy
Lang, D., Pöhl, C., Holec, D., Schatte, J., Povoden-Karadeniz, E., Knabl, W., Clemens, H. & Primig, S., 2016, In: Journal of alloys and compounds. 654, p. 445-454Research output: Contribution to journal › Article › Research › peer-review
- Published
On the evolution of secondary hardening carbides during continuous versus isothermal heat treatment of high speed steel HS 6-5-2
Sackl, S. C., Leitner, H., Clemens, H. & Primig, S., 2016, In: Materials characterization. p. 323-330 8 p.Research output: Contribution to journal › Article › Research › peer-review
- Published
Phase Characterization of a Biocompatible Co-Cr-W Alloy Via Correlative Microscopy
Weißensteiner, I., Voigt, P., Maier-Kiener, V. & Clemens, H., 2016, In: Practical metallography = Praktische Metallographie. 53, 7, p. 450-461 12 p.Research output: Contribution to journal › Article › Research › peer-review
- Published
Phasencharakterisierung mittels korrelativer Mikroskopie an einer biokompatiblen Co-Cr-W Legierung
Weißensteiner, I., Voigt, P., Maier-Kiener, V. & Clemens, H., 2016, Sonderbände der Praktischen Metallographie: Fortschritte in der Metallographie. Vol. 48. p. 151-156 6 p.Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
- Published
Precipitation-strengthened high-temperature ferrites
Godor, F., Liebscher, C., Stein, F., Palm, M., Rashkova, B., Maier-Kiener, V., Mayer, S. & Clemens, H., 2016.Research output: Contribution to conference › Presentation › Research
- Published
Preferential site occupancy of alloying elements in TiAl-based phases
Holec, D., Reddy, R. K., Klein, T. & Clemens, H., 2016, In: Journal of applied physics. 119, p. 1-6 6 p.Research output: Contribution to journal › Article › Research › peer-review
- Published
Preparation Methods for Examining the ωo-Phase Formation in a β-Solidifying TiAl Alloy via Atom Probe Tomography
Schachermayer, M., Klein, T., Clemens, H. & Mayer, S., 2016, In: Practical metallography = Praktische Metallographie. 53, 2, p. 73-85 13 p., 53 (2016) 2.Research output: Contribution to journal › Article › Research › peer-review
- Published
Silicon distribution and silicide precipitation during annealing in an advanced multi-phase g-TiAl based alloy
Klein, T., Rashkova, B., Holec, D., Clemens, H. & Mayer, S., 2016, In: Acta materialia. 110, p. 236-245 10 p.Research output: Contribution to journal › Article › Research › peer-review
- Published
Silicon distribution and silicide precipitation in an advanced multi-phase γ-TiAl based alloy during annealing
Klein, T., Rashkova, B., Holec, D., Clemens, H. & Mayer, S., 2016.Research output: Contribution to conference › Presentation › Research
- Published
Specimen preparation to analyze the fracture surface of nanocrystalline pearlite
Sackl, S. C., Leitner, T., Turk, C., Riedl, H. & Clemens, H., 2016.Research output: Contribution to conference › Presentation › Research
- Published
Status of Titanium Aluminide for Aero Engine Applications
Clemens, H., Schloffer, M. & Smarsly, W., 2016.Research output: Contribution to conference › Presentation › Research
- Published
Strain-induced martensitic transformation in a Co-Cr-W alloy studied by in-situ HEXRD experiments
Weißensteiner, I., Erdely, P., Voigt, P., Clemens, H. & Maier-Kiener, V., 2016.Research output: Contribution to conference › Poster › Research
- Published
Texture evolution in multi-phase TNM sheet materials measured by means of high-energy X-ray diffraction
Erdely, P., Staron, P., Maawad, E., Schell, N., Güther, V., Clemens, H. & Mayer, S., 2016.Research output: Contribution to conference › Poster › Research
- 2015
- Published
Improving the creep behavior and microstructural stability of an advanced γ-TiAl based alloy
Kastenhuber, M., Rashkova, B., Mayer, S. & Clemens, H., 14 Dec 2015.Research output: Contribution to conference › Presentation › Research
- Published
Material para un componente de turbina de gas, procedimiento para la fabricación de un componente de turbina de gas, así como componente de turbina de gas
Smarsly, W. (Inventor), Clemens, H. (Inventor), Guether, V. (Inventor), Kremmer, S. (Inventor), Otto, A. (Inventor) & Chladil, H. (Inventor), 15 Oct 2015, IPC No. C22F 1/ 18 A I, Patent No. ES2548243T, Priority date 18 Oct 2008, Priority No. WO2008DE01702Research output: Patent
- Published
Ab initio study on stacking faults in gamma-TiAl
Dumitraschkewitz, P., Clemens, H., Mayer, S. & Holec, D., 2 Oct 2015.Research output: Contribution to conference › Poster › Research
- E-pub ahead of print
Characterization of the high temperature deformatin behavior of two intermetallic TiAl-Mo alloys
Godor, F., Werner, R., Lindemann, J., Clemens, H. & Mayer, S., 18 Sept 2015, (E-pub ahead of print) In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 648.2015, 11 November, p. 208-216 9 p.Research output: Contribution to journal › Article › Research › peer-review
- E-pub ahead of print
Carbon distribution in multi-phase γ-TiAl based alloys and its influence on mechanical properties and phase formation
Klein, T., Schachermayer, M., Mendez Martin, F., Schöberl, T., Rashkova, B., Clemens, H. & Mayer, S., 21 May 2015, (E-pub ahead of print) In: Acta materialia. 94.2015, 1 August, p. 205-213 9 p.Research output: Contribution to journal › Article › Research › peer-review
- Published
Enhancing the operation temperature of TiAl-alloys
Kastenhuber, M., Rashkova, B., Mayer, S. & Clemens, H., 19 May 2015.Research output: Contribution to conference › Presentation › Research
- E-pub ahead of print
Enhancement of creep properties and microstructural stability of intermetallic β-solidifying γ-TiAl based alloys
Kastenhuber, M., Rashkova, B., Clemens, H. & Mayer, S., 14 Apr 2015, (E-pub ahead of print) In: Intermetallics. 63.2015, August, p. 19-26 8 p.Research output: Contribution to journal › Article › Research › peer-review
- Published
Microstructural investigations of a nanocrystalline high-entropy alloy
Schuh, B., Hohenwarter, A., Mendez Martin, F., Clemens, H. & Pippan, R., 8 Apr 2015, p. 319.Research output: Contribution to conference › Poster › Research › peer-review
- Published
Boron grain boundary segregation in a heat treatable steel
Haslberger, P., Turk, C., Babinsky, K., Caliskanoglu, D., Clemens, H. & Primig, S., 15 Mar 2015, In: Berg- und hüttenmännische Monatshefte : BHM. 160.2015, 5, p. 204-208 5 p.Research output: Contribution to journal › Article › Research › peer-review
- Published
Interplay between effect of Mo and chemical disorder on the stability of β/βo-TiAl phase
Holec, D., Legut, D., Isaeva, L., Souvatzis, P., Clemens, H. & Mayer, S., 1 Jan 2015, In: Intermetallics. 61, p. 85-90 6 p., 5631.Research output: Contribution to journal › Article › Research › peer-review
- Published
Advanced intermetallic titanium aluminides
Clemens, H., Mayer, S., Smarsly, W., Haberl, U. & Güther, V., 2015.Research output: Contribution to conference › Presentation › Research › peer-review
- Published
Atom probe study of ωo phase in a β phase containing TiAl alloy
Klein, T., Schachermayer, M., Mendez Martin, F., Clemens, H. & Mayer, S., 2015.Research output: Contribution to conference › Poster › Research
- Published
B2 order transformation in a Fe - 25 at% Co-9 at% Mo alloy
Turk, C., Kellezi, G., Harald, L., Peter, S., Gan, W., Clemens, H. & Primig, S., 2015, Materials Research Society Symposium Proceedings Vol. 1760. Vol. 1760.Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
- Published
Bruchverhalten von technisch reinem Molybdan im Kerbschlagbiegeversuch
Babinsky, K., Lorich, A., Knabl, W., Stickler, R., Clemens, H. & Primig, S., 2015, p. 277.Research output: Contribution to conference › Poster › Research › peer-review
- Published
Comparison of continuous and isothermal tempering of a High Speed Steel
Sackl, S. C., Kellezi, G., Leitner, H., Clemens, H. & Primig, S., 2015, Proceedings of the International Conference on Solid-Solid Phase Transformations in Inorganic Materials . p. 99-100Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
- Published
Comparison of the continuous and isothermal tempering of a HS 6-5-2 high speed steel
Sackl, S. C., Kellezi, G., Leitner, H., Clemens, H. & Primig, S., 2015.Research output: Contribution to conference › Presentation › Research › peer-review
- Published
Correlative microscopy and atom probe tomography of the M-A constituent in a carbide-free bainite
Hofer, C., Bliznuk, V., Verdiere, A., Petrov, R., Winkelhofer, F., Clemens, H. & Primig, S., 2015.Research output: Contribution to conference › Poster › Research
- Published
Decording the nanostructure of advanced TiAl alloys
Schwaighofer, E., Staron, P., Rashkova, B., Stark, A., Schell, N., Clemens, H. & Mayer, S., 2015, 2 p.Research output: Book/Report › Commissioned report › Transfer › peer-review
- Published
Enhancement of the application temperature of titanium aluminides
Kastenhuber, M., Rashkova, B., Clemens, H. & Mayer, S., 2015, In: Berg- und hüttenmännische Monatshefte : BHM. 160, 7, p. 342-345Research output: Contribution to journal › Article › Research
- Published
Evolution of strain-induced precipitates in a molybdenum base Mo-Hf-C alloy
Lang, D., Karge, L., Schatte, J., Gilles, R., Staron, P., Clemens, H. & Primig, S., 2015.Research output: Contribution to conference › Poster › Research › peer-review
- Published
Evolution of strain-induced precipitates in a molybdenum base Mo-Hf-C alloy
Lang, D., Dallinger, R., Karge, L., Schatte, J., Gilles, R., Knabl, W., Staron, P., Clemens, H. & Primig, S., 2015.Research output: Contribution to conference › Presentation › Research › peer-review
- Published
Evolution of strain-induced precipitates in a molybdenum base Mo-Hf-C alloy
Lang, D., Schatte, J., Knabl, W., Dallinger, R., Clemens, H. & Primig, S., 2015, Proceedings of the 2015 International Conference on Powder Metallurgy & Particulate Materials. Bingert, S. R. & Luk, S. H. (eds.). p. 08-1-08-7Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
- Published
Evolution of strain-induced precipitates in a molybdenum-base Mo-Hf-C alloy
Lang, D., Schatte, J., Knabl, W., Dallinger, R., Clemens, H. & Primig, S., 2015, In: International Journal of Powder Metallurgy. 51, 4Research output: Contribution to journal › Article › Research › peer-review
- Published
Evolution of the ω-phase in a multi-phase TiAl alloy and its effect on hardness
Rashkova, B., Klein, T., Schachermayer, M., Mendez Martin, F., Schöberl, T., Zhang, Z., Mayer, S. & Clemens, H., 2015.Research output: Contribution to conference › Presentation › Research › peer-review
- Published
Grain boundary study of technically pure molybdenum by combining APT and TKD
Babinsky, K., Knabl, W., Lorich, A., De Kloe, R., Clemens, H. & Primig, S., 2015, In: Ultramicroscopy. 159, p. 445-451 7 p.Research output: Contribution to journal › Article › Research › peer-review
- Published
Grain growth and β to α transformation behavior of a β-solidifying TiAl alloy
Klein, T., Niknafs, S., Dippenaar, R., Clemens, H. & Mayer, S., 2015, In: Advanced engineering materials. 17, 6, p. 786-790Research output: Contribution to journal › Article › Research › peer-review
- Published
High temperature laser-scanning confocal microscopy for the in-situ investigation of grain growth and phase transformations in intermetallic γ-TiAl based alloys
Klein, T., Niknafs, S., Dippenaar, R., Clemens, H. & Mayer, S., 2015, In: Practical metallography = Praktische Metallographie. 52, 5, p. 259-269Research output: Contribution to journal › Article › Research › peer-review
- Published
Honda Foundation Report Nr. 155: The role of materials in progress and limit of technological evolution
Clemens, H., 2015Research output: Book/Report › Commissioned report › Transfer › peer-review
- Published
Influence of discontinuous precipitation on the creep behavior of a ß-solidified γ-TiAl based alloy
Kastenhuber, M., Lehner, A., Hawranek, G., Krajnc, B., Clemens, H. & Mayer, S., 2015, In: Practical metallography = Praktische Metallographie. 52, 5, p. 249-258Research output: Contribution to journal › Article › Research › peer-review
- Published
Influence of the sample preparation technique on the μ phase fraction analysis in a Fe-25Co-15Mo alloy by means of XRD
Turk, C., Clemens, H., Primig, S., Kellezi, G. & Leitner, H., 2015, In: Practical metallography = Praktische Metallographie. 52, 6, p. 323-333Research output: Contribution to journal › Article › Research › peer-review
- Published
In-situ Charakterisierungsmethoden: Ein wichtiges Werkzeug bei der Entwicklung von intermetallischen Titanaluminiden
Clemens, H. & Mayer, S., 2015.Research output: Contribution to conference › Presentation › Research › peer-review
- Published
In-situ high-energy X-ray diffraction on an intermetallic ß-stabilised γ-TiAl based alloy
Erdely, P., Stark, A., Clemens, H. & Mayer, S., 2015, In: Berg- und hüttenmännische Monatshefte : BHM. 160, 5, p. 221-225Research output: Contribution to journal › Article › Research › peer-review
- Published
In-situ study of the time-temperature-transformation behaviour of a multi-phase intermetallic beta-stabilised TiAl alloy
Erdely, P., Werner, R., Schwaighofer, E., Clemens, H. & Mayer, S., 2015, In: Intermetallics. 57, p. 17-24Research output: Contribution to journal › Article › Research › peer-review
- Published
In-situ study of the time-temperature-transformation behaviour of an intermetallic γ-TiAl based alloy
Erdely, P., Werner, R., Schwaighofer, E., Stark, A., Schell, N., Clemens, H. & Mayer, S., 2015.Research output: Contribution to conference › Presentation › Research › peer-review
- Published
Intermetallische Titanaluminide als innovative Hochtemperaturleichtbau- werkstoffe – wie materialographische Methoden zu ihrer Entwicklung beigetragen haben
Clemens, H. & Mayer, S., 2015, p. 19-28.Research output: Contribution to conference › Presentation › Research › peer-review
- Published
Intermetallische Titanaluminide als innovative Hochtemperaturleichtbauwerkstoffe – wie materialographische Methoden zu ihrer Entwicklung beigetragen haben
Clemens, H. & Mayer, S., 2015, Praktische Metallographie. Vol. Sonderband 47 . p. 19-28Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
- Published
Intermetallische Titanaluminide als innovative Hochtemperaturleichtbauwerkstoffe – wie materialographische Methoden zu ihrer Entwicklung beigetragen haben
Clemens, H. & Mayer, S., 2015, In: Practical metallography = Praktische Metallographie. 52, 12, p. 691-720Research output: Contribution to journal › Article › Research › peer-review
- Published
Investigation of the self tempering effect of martensite by means of atom probe tomography
Sackl, S. C., Clemens, H. & Primig, S., 2015, In: Practical metallography = Praktische Metallographie. 52, 7, p. 374-383Research output: Contribution to journal › Article › Research › peer-review
- Published
Mechanical properties, microstructure and thermal stability of a nanocrystalline CoCrFeMnNi high-entropy alloy after severe plastic deformation
Schuh, B., Mendez Martin, F., Völker, B., George, E. P., Clemens, H., Pippan, R. & Hohenwarter, A., 2015, In: Acta materialia. 96, p. 258-268Research output: Contribution to journal › Article › Research › peer-review
- Published
Metallography - A Powerful Instrument for Material Characterisation, Material Development and Failure Analysis
Panzenböck, M., Hawranek, G., Mendez Martin, F., Mayer, S., Pölzl, S., Schütz, P., Primig, S., Rashkova, B. & Clemens, H., 2015.Research output: Contribution to conference › Presentation › Research › peer-review
- Published
Microstructural characterization of intermetallic Mo-containing TiAl-Si alloys after high temperature deformation
Godor, F., Werner, R., Lindemann, J., Mayer, S. & Clemens, H., 2015.Research output: Contribution to conference › Presentation › Research
- Published
Microstructural evolution and grain refinement in an intermetallic titanium aluminide alloy with molybdenum content
Rashkova, B., Spiradek-Hahn, K., Brabetz, M., Zhang, Z., Schöberl, T., Clemens, H. & Mayer, S., 2015, In: International journal of materials research : IJMR ; Zeitschrift für Metallkunde. 106, p. 1-7Research output: Contribution to journal › Article › Research › peer-review
- Published
Microstructure characterization of intermetallic γ-TiAl based alloys after high-temperature deformation
Godor, F., Werner, R., Lindemann, J., Clemens, H. & Mayer, S., 2015, In: Practical metallography = Praktische Metallographie. 52, 5, p. 239-248Research output: Contribution to journal › Article › Research › peer-review
- Published
On the chemistry of the carbides in a molybdenum base Mo-Hf-C alloy produced by powder metallurgy
Lang, D., Pöhl, C., Holec, D., Schatte, J., Povoden-Karadeniz, E., Knabl, W., Primig, S. & Clemens, H., 2015.Research output: Contribution to conference › Poster › Research
- Published
Order Transition and its impact on mechanical properties of a Fe - 25 at% Co-9 at% Mo alloy
Turk, C., Kellezi, G., Harald, L., Clemens, H. & Primig, S., 2015, p. 307.Research output: Contribution to conference › Poster › Research › peer-review
- Published
Orientation dependent recovery and recrystallization behavior of hot-rolled molybdenum
Primig, S., Clemens, H., Knabl, W., Lorich, A. & Stickler, R., 2015, In: International journal of refractory metals & hard materials. 48, p. 179-186Research output: Contribution to journal › Article › Research › peer-review
- Published
Oxidation protection of multiphase Mo-containing γ-TiAl-based alloys under cyclic test conditions
Donchev, A., Pflumm, R., Galetz, M., Mayer, S., Clemens, H. & Schütze, M., 2015, Materials Research Society Symposium Proceedings Vol. 1760.Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research
- Published
Phase decomposition of a nanocrystalline CoCrFeMnNi high-entropy alloy
Schuh, B., Hohenwarter, A., Mendez Martin, F., Clemens, H., Völker, B., Pippan, R. & George, E. P., 2015.Research output: Contribution to conference › Poster › Research
- Published
Phase decomposition of a nanocrystalline CoCrFeMnNi high-entropy alloy
Schuh, B., Hohenwarter, A., Mendez Martin, F., Clemens, H., George, E. P., Völker, B. & Pippan, R., 2015.Research output: Contribution to conference › Presentation › Research
- Published
Preparation of carbide-free bainitic steels for EBSD investigations
Hofer, C., Clemens, H. & Primig, S., 2015, In: Practical metallography = Praktische Metallographie. 52, 7, p. 384-395Research output: Contribution to journal › Article › Research › peer-review
- Published
Pulvermetallurgie von intermetallischen Titanaluminiden
Mayer, S. & Clemens, H., 2015, In: Berg- und hüttenmännische Monatshefte : BHM. 160, p. 513 - 516 4 p.Research output: Contribution to journal › Article › Research › peer-review
- Published
Reconstruction of grain boundaries by crystallographic features: A method applicable for reflectron data?
Babinsky, K., Gault, B., Clemens, H. & Primig, S., 2015.Research output: Contribution to conference › Presentation › Research
- Published
Segregation of C and si in lamellar microstructures of β-solidifying γ-TiAl-based alloys
Klein, T., Rashkova, B., Clemens, H. & Mayer, S., 2015.Research output: Contribution to conference › Presentation › Research › peer-review
- Published
Stacking fault energies and the generalized stacking fault energy of γ-TiAl (ongoing Masterthesis)
Dumitraschkewitz, P., Clemens, H., Mayer, S. & Holec, D., 2015.Research output: Contribution to conference › Presentation › Research › peer-review
- Published
Structural characterization of "carbide-free" bainite in a Fe-0.2C-1.5Si-2.5Mn steel
Hofer, C., Harald, L., Winkelhofer, F., Clemens, H. & Primig, S., 2015, In: Materials characterization. 102, p. 85-91Research output: Contribution to journal › Article › Research › peer-review
- Published
Texture evolution during deformation of a Mo-Hf-C alloy studied with electron backscatter diffraction
Lang, D., Schatte, J., Knabl, W., Clemens, H. & Primig, S., 2015, In: Berg- und hüttenmännische Monatshefte : BHM. 160, 5, p. 226-230Research output: Contribution to journal › Article › Research › peer-review
- Published
The role of metallography in the development and characterization of high-performance materials
Mayer, S., Hawranek, G., Mendez Martin, F., Panzenböck, M., Pölzl, S., Primig, S., Rashkova, B. & Clemens, H., 2015, In: Practical metallography = Praktische Metallographie. 52.2015, 2, p. 59-74 6 p.Research output: Contribution to journal › Article › Research › peer-review
- Published
The use of atom probe tomography for the characterization and development of intermetallic γ-TiAl based alloys
Klein, T., Schachermayer, M., Mendez Martin, F., Holec, D., Rashkova, B., Schöberl, T., Clemens, H. & Mayer, S., 2015.Research output: Contribution to conference › Presentation › Research › peer-review
- 2014
- Published
Komplementäre Werkstoffcharakterisierung am Department Metallkunde und Werkstoffprüfung
Mayer, S., Panzenböck, M. & Clemens, H., 6 Aug 2014, In: Dialog : Materialwissenschaft und Werkstofftechnik . p. 56-57Research output: Contribution to journal › Article › Research › peer-review
- Published
60. Metallkunde Jubiläumskolloquium - Abstractband
Mitterer, C. (Editor) & Clemens, H. (Editor), 2014, Eigenverlag.Research output: Book/Report › Anthology › Research
- Published
Advanced intermetallic γ-TiAl based alloys with improved microstructural stability during creep
Kastenhuber, M., Rashkova, B., Clemens, H. & Mayer, S., 2014.Research output: Contribution to conference › Presentation › Research › peer-review
- Published
Advanced intermetallic γ-TiAl based alloys with improved microstructural stability during creep
Kastenhuber, M., Rashkova, B., Clemens, H. & Mayer, S., 2014, Materials Research Society Symposium Proceedings Vol. 1760 Materials Research Society.Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
- Published
Advanced Steels
Clemens, H., Primig, S., Mendez Martin, F., Babinsky, K., Hofer, C., Lang, D., Sackl, S. C., Turk, C. & Weißensteiner, I., 2014.Research output: Contribution to conference › Poster › Research › peer-review
- Published
Alloying element distribution within the constituent phases of a C-containing γ-TiAl based alloy studied by atom probe tomography
Klein, T., Mendez Martin, F., Schachermayer, M., Schöberl, T., Rashkova, B., Clemens, H. & Mayer, S., 2014.Research output: Contribution to conference › Presentation › Research › peer-review
- Published
A novel approach for site-specific atom probe specimen preparation by FIB and transmission-EBSD
Babinsky, K., De Kloe, R., Clemens, H. & Primig, S., 2014.Research output: Contribution to conference › Presentation › Research › peer-review
- Published
A novel approach for site-specific atom probe specimen preparation by focused ion beam and transmission electron backscatter diffraction
Babinsky, K., De Kloe, R., Clemens, H. & Primig, S., 2014, In: Ultramicroscopy. 144, p. 9-18Research output: Contribution to journal › Article › Research › peer-review
- Published
APT/FIM and neutron diffraction study of the ordering mechanism in a Fe-Co-Mo-alloy
Turk, C., Primig, S., Clemens, H., Leitner, H. & Kellezi, G., 2014.Research output: Contribution to conference › Presentation › Research › peer-review
- Published
Atomic relaxation processes in an intermetallic Ti-43Al-4Nb-1Mo-0.1B alloy studied by mechanical spectroscopy
Juan, J. S., Simas, P., Schmölzer, T., Clemens, H., Mayer, S. & No, M. L., 2014, In: Acta materialia. 65, p. 338-350Research output: Contribution to journal › Article › Research › peer-review
- Published
Atom probe study of boron segregation in a martensitic steel prepared according to a novel FIB/t-EBSD preparation technique
Turk, C., Babinsky, K., Haslberger, P., Clemens, H. & Primig, S., 2014.Research output: Contribution to conference › Poster › Research › peer-review
- Published
Atom probe study of grain boundaries in technically pure molybdenum
Babinsky, K., Knabl, W., Lorich, A., De Kloe, R., Clemens, H. & Primig, S., 2014.Research output: Contribution to conference › Presentation › Research › peer-review
- Published
Atom probe tomography of carbides occuring in "carbide-free" bainitic steels
Hofer, C., Winkelhofer, F., Krammerbauer, J., Clemens, H. & Primig, S., 2014.Research output: Contribution to conference › Presentation › Research › peer-review
- Published
B2 order transformation in a Fe - 25 at% Co - 9 at% Mo alloy
Turk, C., Kellezi, G., Leitner, H., Gan, W., Staron, P., Clemens, H. & Primig, S., 2014.Research output: Contribution to conference › Presentation › Research › peer-review
- Published
Characterization of the crack initiation and crack propagation behavior of welded steels by means of the replica technique
Panzenböck, M., Horn, A., Posch, G. & Clemens, H., 2014, In: Practical metallography = Praktische Metallographie. 51, p. 557-567Research output: Contribution to journal › Article › Research › peer-review
- Published
Combining Fib, t-EBSD and atom probe tomography for full chemical and crystallographic materials characterization
Babinsky, K., De Kloe, R., Haslberger, P., Hofer, C., Lang, D., Turk, C., Clemens, H. & Primig, S., 2014.Research output: Contribution to conference › Presentation › Research › peer-review
- Published
Constitutive analysis and microstructure evolution of the high-temperature deformation behavior of an advanced intermetallic multi-phase gamma-TiAl-based alloy
Werner, R., Schwaighofer, E., Schloffer, M., Clemens, H., Lindemann, J. & Mayer, S., 2014, Advanced Materials Research. p. 807-812Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
- Published
Constitutive analysis of the flow curve behavior of an intermetallic beta-solidifying gamma-TiAl-based alloy and microstructural characterization of the deformed state
Werner, R., Lindemann, J., Clemens, H. & Mayer, S., 2014.Research output: Contribution to conference › Poster › Research › peer-review
- Published
Constitutive analysis of the flow curve behavior of an intermetallic beta-solidifying gamma-TiAl-based alloy and microstructural characterization of the deformed state
Werner, R., Lindemann, J., Clemens, H. & Mayer, S., 2014, In: Berg- und hüttenmännische Monatshefte : BHM. 159, p. 286-288Research output: Contribution to journal › Article › Research › peer-review
- Published
Development status, applications and perspectives of advanced intermetallic titanium aluminides
Clemens, H. & Mayer, S., 2014, Materials Science Forum. p. 15-20Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
- Published
Die Rolle der Metallographie bei Entwicklung und Charakterisierung von Hochleistungswerkstoffen
Mayer, S., Hawranek, G., Mendez Martin, F., Panzenböck, M., Pölzl, S., Primig, S., Rashkova, B. & Clemens, H., 2014, Sonderbände der Praktischen Metallographie 46. p. 3-12Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
- Published
Distribution of alloying elements within the constituent phases of a C-containing gamma-TiAl based alloy studied by atom probe tomography: Mater. Res. Soc. Symp. Proc. Vol.1760 2014 Materials Research Society
Klein, T., Mendez Martin, F., Schachermayer, M., Rashkova, B., Clemens, H. & Mayer, S., 2014Research output: Non-textual form › Web publication/site › Research
- Published
EBSD Untersuchungen von warmumgeformten Superduplexstahl
Primig, S., Ragger, K., Clemens, H. & Buchmayr, B., 2014, Sonderbände der Praktischen Metallographie 46. p. 107-112Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
- Published
Effect of carbon addition on solidification behavior, phase evolution and creep properties of an intermetallic beta-stabilized gamma-TiAl based alloy
Schwaighofer, E., Rashkova, B., Clemens, H., Stark, A. & Mayer, S., 2014, In: Intermetallics. 46, p. 173-184Research output: Contribution to journal › Article › Research › peer-review
- Published
Einfluss der diskontinuierlichen Ausscheidung auf das Kriechverhalten einer beta-erstarrenden gamma-TiAl-Basislegierung
Kastenhuber, M., Lehner, A., Hawranek, G., Krajnc, B., Clemens, H. & Mayer, S., 2014, Sonderbände der Praktischen Metallographie 46. p. 189-194Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
- Published
Einfluss der diskontinuierlichen Ausscheidung auf das Kriechverhalten einer β-erstarrenden γ-TiAl-Basislegierung
Kastenhuber, M., Lehner, A., Hawranek, G., Krajnc, B., Clemens, H. & Mayer, S., 2014, p. 189-194.Research output: Contribution to conference › Presentation › Research › peer-review
- Published
Einfluss der Präparationstechnik bei der Bestimmung des µ-Phasenanteils in einer Fe-25Co-15Mo Legierung mittels XRD
Turk, C., Kellezi, G., Leitner, H., Clemens, H. & Primig, S., 2014, Sonderbände der Praktischen Metallographie 46. p. 101-106Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
- Published
Einfluss der Präparationstechnik bei der Bestimmung des µ-Phasenanteils in einer Fe-25Co-15Mo Legierung mittels XRD
Turk, C., Kellezi, G., Leitner, H., Clemens, H. & Primig, S., 2014, p. 101-106.Research output: Contribution to conference › Presentation › Research › peer-review
- Published
Elektrolytisches Polieren vs. Vibrationspolieren: Entwicklung einer Präparationsmethode zur EBSD-Analyse der Mo-Basislegierung MHC
Lang, D., Schatte, J., Clemens, H. & Primig, S., 2014, Sonderbände der Praktischen Metallographie 46. p. 59-64Research output: Chapter in Book/Report/Conference proceeding › Conference contribution