Heinz Gottfried Leitner

(Former)

1 - 90 out of 90Page size: 100

Research output

  1. 2011
  2. Published

    Leichtbau, Betriebsfestigkeit und Verschleiß - Optimierung unter Berücksichtigung dreier konträrer Ziele am Beispiel hochbelasteter Schneidzähne

    Redik, S., Mösenbacher, A., Guster, C., Oberwinkler, C., Leitner, H. & Feyerer, C., 2011, Konsequenter Leichtbau und Festigkeitssteigerung - (k)ein Widerspruch?. p. 253-264

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  3. Published

    Leichtbau, Betriebsfestigkeit und Verschleiß – Optimierung unter Berücksichtigung dreier konträrer Ziele am Beispiel hochbelasteter Schneidzähne

    Redik, S., Mösenbacher, A., Guster, C., Oberwinkler, C., Feyerer, C. & Leitner, H., 2011.

    Research output: Contribution to conference › Poster › Research › peer-review

  4. Published

    The influence of welding process parameters on residual stresses by means of coupled thermo-mechanical simulation

    Stoschka, M., Fössl, T., Leitner, H. & Eichlseder, W., 2011, In: International journal of microstructure and materials properties (IJMMP). 6, p. 105-121

    Research output: Contribution to journal › Article › Research › peer-review

  5. 2010
  6. Published

    Application of fatigue approaches on fillet welds of high strength steel

    Stoschka, M., Leitner, M., Fössl, T., Leitner, H. & Eichlseder, W., 2010, In: Materialwissenschaft und Werkstofftechnik. 41, p. 961-971

    Research output: Contribution to journal › Article › Research › peer-review

  7. Published

    „Fertigungsbedingte Einflüsse auf die Schwingfestigkeit von Al- Gussbauteilen“

    Eichlseder, W., Powazka, D. & Leitner, H., 2010, In: Giesserei. 07, p. 32-39

    Research output: Contribution to journal › Article › Research › peer-review

  8. Published

    On the applicability of high strengh self-tapping aluminium bolts in magnesium nut materials for automotive applications

    Gerstmayr, G., Mori, G., Leitner, H. & Eichlseder, W., 2010, In: Materials and Corrosion. 61, p. 379-387

    Research output: Contribution to journal › Article › Research › peer-review

  9. Published

    .:“Schädigungstolerante Auslegung von Aluminium-Druckgusskomponenten“

    Oberwinkler, C., Leitner, H. & Eichlseder, W., 2010, In: MP materials testing : Materialprüfung . 52, p. 513-519

    Research output: Contribution to journal › Article › Research › peer-review

  10. 2009
  11. Published

    Influence of the peening intensity on the fatigue behavior of shot peened titanium components

    Leitner, H., Oberwinkler, B., Gaenser, H. P. & Stoschka, M., 1 Jan 2009, Fatigue and Fracture Mechanics: 36th Volume. Vol. 1508 STP. p. 134-146 13 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  12. Published

    Analysis and simulation of heat treatment processes for fatigue and fracture optimization of forged aircraft engine and structural parts

    Riedler, M., Stockinger, M., Stoschka, M., Oberwinkler, B., Tan, W. & Leitner, H., 2009, Aeromat2009. p. 11-12

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  13. Published

    Applicability of high strength thread forming Aluminum bolts in magnesium power train components: Proceedings 2009 - 9th European All-Wheel Drive Congress Graz

    Gerstmayr, G., Oberhuber, P., Jakob, T. & Leitner, H., 2009

    Research output: Non-textual form › Web publication/site › Research

  14. Published

    Betriebsfeste Auslegung von Aluminiumdruckgussteilen unter Berücksichtigung der Porenverteilung im Bauteil

    Oberwinkler, C., Eichlseder, W., Schönfeld, F., Schmidt, S. & Leitner, H., 2009, In: Druckguss-Praxis. p. 97-103

    Research output: Contribution to journal › Article › Research › peer-review

  15. Published

    Betriebsfeste Auslegung von Aluminiumdruckgussteilen unter der Berücksichtigung der Porenverteilung im Bauteil

    Oberwinkler, C., Eichlseder, W., Schönfeld, F., Schmidt, S. & Leitner, H., 2009, Gießtechnik im Motorenbau - Anforderungen der Automobilindustrie. p. 173-189

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  16. Published

    Combination of Safe Life and Fail Safe Concepts to Assess the Lifetime of Ti-6Al-4V Forgings

    Oberwinkler, B., Leitner, H. & Riedler, M., 2009, TMS 2009 - Supplemental Proceedings. p. 77-84

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  17. Published

    Cost and Weight Optimization of Magnesium Power Train Components by Using Aluminum Thread Forming Fastener Technology

    Jakob, T., Gerstmayr, G., Leitner, H., Oberhuber, P. & Hinteregger, C., 2009, In: SAE technical papers. 10 p., 2009-01-1256.

    Research output: Contribution to journal › Article › Research › peer-review

  18. Published

    Creep and Relaxation Behaviour of Mg-Al based Die cast Alloys AZ91 and AE44

    Gerstmayr, G., Leitner, H. & Eichlseder, W., 2009, Creep and Relaxation Behaviour of Mg-Al based Die cast Alloys AZ91 and AE44. GDMB, p. ---

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  19. Published

    Estimation of the local porosity of aluminium high-pressure die casting components from casting simulation results using self-organizing maps

    Oberwinkler, C., Eichlseder, W. & Leitner, H., 2009, In: International foundry research = Giessereiforschung. p. 22-33

    Research output: Contribution to journal › Article › Research › peer-review

  20. Published

    Fatigue Life Behavior of a Hypoid Gear Tooth Root Taking the Influences of Orbital Forging into Account

    Haberer, C., Eichlseder, W., Dietrich, A. & Leitner, H., 2009, SAE World Congress, Paper No. 2009-01-0812. p. 1-9

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  21. Published

    Fatigue Life Behavior of a Hypoid Gear Tooth Root Taking the Influences of Orbital Forging into Account

    Haberer, C. & Leitner, H., 2009

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  22. Published

    Four Point Bending Fatigue Tests of Forged Ti 6Al 4V

    Oberwinkler, B., Riedler, M., Leitner, H. & Javidi, A., 2009, In: MP materials testing : Materialprüfung . 51, p. 580-586

    Research output: Contribution to journal › Article › Research › peer-review

  23. Published

    Improvement of an existing model to estimate the pore distribution for a fatigue proof design of Al hpdc components

    Oberwinkler, C., Leitner, H. & Eichlseder, W., 2009, Shape Casting: 3rd International Symposium. p. 115-128

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  24. Published

    Schädigungstolerante Auslegung von Aluminiumdruckgussteilen unter Berücksichtigung der lokalen Defekte

    Oberwinkler, C., Schönfeld, F., Schmidt, S., Leitner, H. & Eichlseder, W., 2009, 36. Tagung des DVM-Srbeitskreises Betriebsfestigkeit. p. 93-102

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  25. Published

    The Definition of the Influence of Pore Size on the Fatigue Limit Using Short Crack Growth Experiments

    Oberwinkler, C., Eichlseder, W. & Leitner, H., 2009, In: Journal of ASTM international. p. 54-68

    Research output: Contribution to journal › Article › Research › peer-review

  26. Published

    Tragfähigkeitssteigerung von Hypoidverzahnungen

    Haberer, C., Godor, I., Leitner, H., Eichlseder, W. & Dietrich, A., 2009, VDI Fachtagung Getriebe in Fahrzeugen 2009. p. 305-315

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  27. 2008
  28. Published

    Assessment of lifetime calculation of forged IN718 aerospace components based on a mulit-parametric microstructural evaluation

    Stoschka, M., Stockinger, M., Leitner, H., Riedler, M. & Eichlseder, W., 2008, SUPERALLOYS 2008. p. 573-582

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  29. Published

    Assessment of lifetime calculation of forged IN718 aerospace components based on a multi-parametric microstructural evaluation

    Stoschka, M., Stockinger, M., Leitner, H. & Riedler, M., 2008, Eleventh International Symposium on Superalloys. p. 573-582

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  30. Published

    Auswirkung von Kaltumformung und Wärmebehandlung auf die Dauerfestigkeit von rundgekneteten Getriebewellen

    Stoschka, M., Lamik, A. & Leitner, H., 2008

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  31. Published

    Bruchmechanische Lebensdauerbewertung von geschmiedeten Bauteilen aus Ti-6Al-4V

    Oberwinkler, B., Leitner, H. & Riedler, M., 2008, DVM Bericht 642, Tagung Werkstoffprüfung 2008. p. 257-262

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  32. Published

    Characterisation of the Fatigue Behaviour of Ti-6Al-4V to Provide a Basis for the Lifetime Estimation

    Oberwinkler, B. & Leitner, H., 2008.

    Research output: Contribution to conference › Poster › Research › peer-review

  33. Published

    Comparison of the Teperature and Pre-Aging Influences on the Low Cycle Fatigue and Thermo-Mechanical Fatigue Behaviour of Copper Alloys (CuCoBe/CuCo2Be)

    Köberl, H., Winter, G., Leitner, H. & Eichlseder, W., 2008, In: Journal of ASTM international. Vol.5, p. 1-12

    Research output: Contribution to journal › Article › Research › peer-review

  34. Published

    Computed Tomography- an Alternative and Complement to Traditional Metallographic Investigations of Porosity in Cast Aluminium

    Powazka, D., Brune, M., Eichlseder, W., Leitner, H. & Oppermann, H., 2008, Computed Tomography- an Alternative and Complement to Traditional Metallographic Investigations of Porosity in Cast Aluminium. p. 51-66

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  35. Published

    Computed Tomography for the Evaluation of the Influence of Porosity on Stress Distribution

    Powazka, D., Brune, M., Eichlseder, W., Leitner, H. & Oppermann, H., 2008, In: Archives of Foundry Engineering (AFE ; quarterly). 8, Special issue 1, p. 291-294

    Research output: Contribution to journal › Article › Research › peer-review

  36. Published

    Das Kitagwa-Haigh Diagramm für die Berechnung der Lebensdauer von Aluminiumdruckgussteilen

    Oberwinkler, C., Leitner, H. & Eichlseder, W., 2008, Das Kitagwa-Haigh Diagramm für die Berechnung der Lebensdauer von Aluminiumdruckgussteilen. p. 257-262

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  37. Published

    Einfluss von Schrauben- und Mutternmaterial sowie der Betriebsbelastung auf das Relaxationsverhalten von Leichtmetallverschraubungen

    Hinteregger, C., Jakob, T. & Leitner, H., 2008, Einfluss von Schrauben- und Mutternmaterial sowie der Betriebsbelastung auf das Relaxationsverhalten von Leichtmetallverschraubungen. p. 28-50

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  38. Published

    Ermittlung der Schwingfestigkeit von reibrührgeschweißten Schraubenverbindungen

    Stoschka, M., Javidi, A., Leitner, H. & Lamik, A., 2008

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  39. Published

    Evaluation of the load carrying capacity of differently manufactured sinter gear wheels

    Haberer, C. & Leitner, H., 2008

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  40. Published

    Evaluation of the load carrying capacity of elastic deform forged planet gear wheels

    Haberer, C. & Leitner, H., 2008

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  41. Published

    Evaluation of the tooth root strength of VAA450 hypoid gear wheels 20MoCr4, SNCM420

    Haberer, C. & Leitner, H., 2008

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  42. Published

    Evaluation of the tooth root strength of VAA450 hypoid gear wheels SCM420

    Haberer, C. & Leitner, H., 2008

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  43. Published

    Fatigue Life Behaviour of a Gear Tooth Root Taking Loading, Manufacturing, Surface Layer and Material into Account

    Haberer, C., Leitner, H., Fröschl, J. & Eichlseder, W., 2008, RELMAS 2008. p. 138-142

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  44. Published

    Fertigungsbedingte Einflüsse auf die Schwingfestigkeit von Al-Gussbauteilen – Neue Erkenntnisse für Druckgussbauteile

    Powazka, D., Brune, M., Oppermann, H., Eichlseder, W. & Leitner, H., 2008, In: Gießerei-Rundschau. 55, p. 92-99

    Research output: Contribution to journal › Article › Research › peer-review

  45. Published

    Influence of Shot Peening on the Fatigue Behaviour of Ti-6Al-4V in Respect of Multiaxial Loading

    Oberwinkler, B., Leitner, H. & Stoschka, M., 2008, 10th International Conference on Shot Peening. p. 100-110

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  46. Published

    Influence of the Peening Intensity on the Fatigue Behavior of Shot Peened Titanium Components

    Leitner, H., Oberwinkler, B., Gänser, H.-P. & Stoschka, M., 2008, In: Journal of ASTM international. 5, p. 1-10

    Research output: Contribution to journal › Article › Research › peer-review

  47. Published

    Life Time Estimation of Highly Loaded Titanium Components with Regard to Automotive Engineering

    Oberwinkler, B., Leitner, H. & Gänser, H.-P., 2008, 2nd Fatigue Symposium Leoben. p. 67-75

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  48. Published

    Optimizing the Load Carrying Capacity of a Gear Tooth Root

    Haberer, C., Leitner, H., Fröschl, J. & Eichlseder, W., 2008, 2nd Fatigue Symposium Leoben. p. 221-230

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  49. Published

    Optimizing the Load Carrying Capacity of a Gear Tooth Root

    Haberer, C., Leitner, H., Fröschl, J. & Eichlseder, W., 2008.

    Research output: Contribution to conference › Poster › Research › peer-review

  50. Published

    Relaxationsverhalten von EN AW 7035 Gewindefurchschrauben für Antriebsstrangkomponenten aus Magnesium

    Hinteregger, C., Leitner, H., Jakob, T. & Godor, I., 2008, In: Konstruktion. 60, 9, p. 109-114

    Research output: Contribution to journal › Article › Research › peer-review

  51. Published

    Relaxationsverhalten von EN AW 7075 Gewindefurchschrauben für Antriebskomponenten aus Magnesium (Teil 2)

    Hinteregger, C., Leitner, H., Jakob, T. & Godor, I., 2008, In: Konstruktion. p. 70-74

    Research output: Contribution to journal › Article › Research › peer-review

  52. Published

    Relaxationsverhalten von EN AW 7075 Gewindefurchschrauben für Antriebsstrangkomponenten aus Magnesium (Teil 1)

    Hinteregger, C., Leitner, H., Jakob, T. & Godor, I., 2008, In: Konstruktion. 9, p. 109-114

    Research output: Contribution to journal › Article › Research › peer-review

  53. Published

    The influence of thermomechanical fatigue on Nickel coatings

    Köberl, H., Winter, G., Leitner, H. & Eichlseder, W., 2008.

    Research output: Contribution to conference › Poster › Research › peer-review

  54. Published

    The influence of thermomechanical fatigue on Nickel coatings

    Köberl, H., Winter, G., Leitner, H. & Eichlseder, W., 2008, Sixt international conference on low cycle fatigue. p. 149-154

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  55. Published

    The influence of welding process parameters on residual stresses by means of coupled thermo-mechanical

    Stoschka, M., Fössl, T., Leitner, H. & Eichlseder, W., 2008, The influence of welding process parameters on residual stresses by means of coupled thermo-mechanical. p. 701-708

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  56. Published

    Verhalten von gehärteten Randschichten unter Kontaktbeanspruchung

    Trausmuth, A., Godor, I., Stoschka, M. & Leitner, H., 2008, Verhalten von gehärteten Randschichten unter Kontaktbeanspruchung. p. 81-93

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  57. 2007
  58. Published

    ALWS Jahresschlussbericht 2006

    Lamik, A. & Leitner, H., 2007

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  59. Published

    Bestimmung der zyklischen Materialeigenschaften von S390PM, S690PM, K890PM

    Köberl, H. & Leitner, H., 2007

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  60. Published

    Determination of the static and dynamic carrying capacity of laser-welded shaft to collar connections

    Haberer, C. & Leitner, H., 2007

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  61. Published

    Ermittlung von Umlaufbiegefestigkeiten von gekerbten Proben zur Entwicklung neuer Werkstoff-Plasmanitrier-Kombinationen am Beispiel von Hochleistungszahnrädern

    Reithofer, G., Leitner, H., Eichlseder, W. & Schuch, F., 2007, In: HTM - journal of heat treatment and materials . 03, p. 134-138

    Research output: Contribution to journal › Article › Research › peer-review

  62. Published

    Evaluation of the load carrying capacity of differently manufactured planet gear wheels

    Haberer, C., Leitner, H. & Köberl, H., 2007

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  63. Published

    "Examination of the root-strength of VAA350+ hypoid gears with different case hardening considerations

    Haberer, C. & Leitner, H., 2007

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  64. Published

    Grundlagenforschung von tribologischen System im Antriebsstrang hinsichtlich Reibung und Verschleiß

    Godor, I., Grün, F., Leitner, H. & Oberwinkler, C., 2007

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  65. Published

    Jahresbericht zum Ermüdungsverhalten von Schweißnähten hochfester Feinkornstähle

    Stoschka, M., Fössl, T. & Leitner, H., 2007

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  66. Published

    Lifetime simulation of thermo-mechanically loaded components

    Riedler, M., Leitner, H., Prillhofer, B., Winter, G. & Eichlseder, W., 2007, In: Meccanica. 42, p. 47-59

    Research output: Contribution to journal › Article › Research › peer-review

  67. Published

    Multiaxial Fatigue of Cast Irons and QT-Steels: Development of a New Fatigue Strength Criterion

    Fröschl, J., Gerstmayr, G., Eichlseder, W. & Leitner, H., 2007, Multiaxial Fatigue of Cast Irons and QT-Steels: Development of a New Fatigue Strength Criterion. p. 1-2

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  68. Published

    Multiaxial Fatigue of QT-Steels: New Fatigue Strength Criterion for Anisotropic Material Behaviour

    Fröschl, J., Gerstmayr, G., Eichlseder, W. & Leitner, H., 2007, Multiaxial Fatigue of QT-Steels: New Fatigue Strength Criterion for Anisotropic Material Behaviour. p. 1-8

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  69. Published

    Numerical simulation of VAA450 hypoid gears based on true geometry in single contact

    Haberer, C. & Leitner, H., 2007

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  70. Published

    Numerischer Vergleich des Kontaktverhaltens verschiedener Prüfverfahren

    Stoschka, M., Grün, F., Godor, I. & Leitner, H., 2007

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  71. Published

    Oberflächenbehandlung durch Kugelstrahlen und Festwalzen

    Leitner, H., Gänser, H.-P. & Eichlseder, W., 2007, In: Materialprüfung. p. 408-413

    Research output: Contribution to journal › Article › Research › peer-review

  72. Published

    Oberflächentopologie am gebeizten Ti-6-4 Schmiedeteil

    Stoschka, M. & Leitner, H., 2007

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  73. Published

    Relaxationsversuche an Alu-Gehäusen

    Lamik, A. & Leitner, H., 2007

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  74. Published

    Schwingfestigkeit von Ti-6Al-4V: Betrachtung mehrerer Einflussgrößen

    Oberwinkler, B., Javidi, A. & Leitner, H., 2007, Schwingfestigkeit von Ti-6Al-4V: Betrachtung mehrerer Einflussgrößen. p. 145-150

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  75. Published

    Schwingversuche an Spannpratzen

    Leitgeb, A. & Leitner, H., 2007

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  76. Published

    The Influence of Temperature and Pre-Aging on the Low Cycle Fatigue Behaviour of Nickel Coatings (Ni 200/201)

    Köberl, H., Leitner, H. & Eichlseder, W., 2007, Experimental Analysis of Nana and Engineering Materials and Structures. p. 731-733

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  77. Published

    Umlaufbiegung von Rohrproben bei 150°C und 1Hz Prüffrequenz

    Lamik, A., Leitner, H. & Stoschka, M., 2007

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  78. Published

    Untersuchung des Anrissverhaltens für das Bauteil "Schwinge" (verwendbar für HHA/DT-4) für IFE Automatic Door Systems

    Leitgeb, A. & Leitner, H., 2007

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  79. Published

    Verhalten von Plasmanitrierschichten unter Rolling Contact Fatigue Beanspruchung

    Godor, I., Leitner, H., Stoschka, M. & Trausmuth, A., 2007

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  80. 2006
  81. Published

    An Investigation of the Cyclic Hardening Behaviour of an Aluminium-Steel Compound

    Lamik, A., Leitner, H., Eichlseder, W. & Lomolino, S., 2006, 23rd Danubia-Adria Symposium on Experimental Methods in Solid Mechanics. p. 171-172

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  82. Published

    Enhanced Fatigue Life by Mechanical Surface Treatments – Experiment and Simulation

    Gänser, H.-P., Godor, I., Leitner, H. & Eichlseder, W., 2006, Fracture of Nano and Engineering Materials and Structures. Springer, p. 205-206

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  83. Published

    Lebensdauerberechnung von Aluminiumkomponenten: Von der Probe zum komplexen Bauteil

    Leitner, H., Eichlseder, W. & Fagschlunger, C., 2006, In: Gießerei-Rundschau. 3, p. 70-76

    Research output: Contribution to journal › Article › Research › peer-review

  84. Published

    Lifetime investigations of wear-resistant ni-coatings

    Köberl, H., Leitner, H., Riedler, M. & Eichlseder, W., 2006, 23rd Danubia-Adria Symposium on experimental methods in solid mechanics. p. 173-175

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  85. Published

    Lifetime investigations of wear-resistant ni-coatings

    Köberl, H., Leitner, H., Riedler, M. & Eichlseder, W., 2006.

    Research output: Contribution to conference › Poster › Research › peer-review

  86. Published

    Multiaxiale Ermüdung - Versuchsergebnisse versus Festigkeitshypothesen

    Leitner, H., Fröschl, J., Gerstmayr, G. & Eichlseder, W., 2006, In: Berg- und hüttenmännische Monatshefte : BHM. 151, p. 350-356

    Research output: Contribution to journal › Article › Research › peer-review

  87. Published

    Schwingfestigkeitsverhalten von Al6016T4/DC06 Werkstoffverbunden

    Lamik, A., Leitner, H., Eichlseder, W. & Riemelmoser, F., 2006, Vom Werkstoff zum Bauteilsystem. p. 251-262

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  88. Published

    Steigerung der Schwingfestigkeit von Maschinenelementen durch innovative Oberflächenbehandlungen

    Leitner, H., Waggermayer, M., Gänser, H.-P. & Reithofer, G., 2006, Schwingfestigkeit von Maschinenelementen durch innovative Oberflächenbehandlungen. p. 31-43

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  89. 2005
  90. Published

    A High Cycle Fatigue Model for Al-Alloys based on Low Cycle Fatigue Data and Notch Sensitivity

    Riedler, M., Araujo, B., Leitner, H. & Eichlseder, W., 2005, A High Cycle Fatigue Model for Al-Alloys based on Low Cycle Fatigue Data and Notch Sensitivity. DAS Secretariat, p. 178-179

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  91. Published

    Augmentation de la Résistance aux effort alternés de roues dentées par combinaison de la cémentation et le grenaillage

    Eichlseder, W., Leitner, H., Godor, I., Waggermayer, M. & Hinteregger, C., 2005, Augmentation de la Réstistance aux effort alternés de roues dentées par combinaison de la cémentation et le grenaillage.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  92. Published

    Betriebsfeste Auslegung von Schraubenverbindungen im Leichtmetallguss

    Leitner, H., Godor, I., Eichlseder, W. & Hinteregger, C., 2005, Betriebsfeste Auslegung von Schraubenverbindungen im Leichtmetallguss. p. 257-263

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  93. Published

    Einsatz von gewindefurchenden Stahl- und Aluminiumschrauben zur Verschraubung von Getriebegehäusen im Fahrzeugbau

    Leitner, H., Godor, I., Hinteregger, C. & Eichlseder, W., 2005, Schraubenverbindungen. p. 347-366

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  94. Published

    Fatigue life analysis of geometrically complex components

    Eichlseder, W., Araujo, B., Riedler, M., Leitner, H. & Godor, I., 2005, Fatigue life analysis of geometrically complex components. p. 504-511

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  95. Published

    Increased Fatigue Limit of Gear Wheels by a Combination of Case Hardening and Shot Peening

    Leitner, H., Eichlseder, W., Godor, I., Waggermayer, M. & Hinteregger, C., 2005, Increased Fatigue Limit of Gear Wheels by Combination of Case Hardening and Shot Peening. p. 487-595

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  96. Published

    Relaxation der Vorspannkraft von Magnesium-Schraubenverbindungen unter betriebsähnlichen Bedingungen

    Leitner, H., Godor, I., Eichlseder, W. & Hinteregger, C., 2005, In: Gießerei-Rundschau. 7, p. 36-43

    Research output: Contribution to journal › Article › Research › peer-review

  97. Published

    Wirtschaftlicher Leichtbau: Gewindefurchschrauben bei druckgegossenen Al-Gehäusen

    Godor, I., Leitner, H., Eichlseder, W., Klampfl, H. & Hinteregger, C., 2005, In: Gießerei-Rundschau. 52, p. 229-234

    Research output: Contribution to journal › Article › Research › peer-review

View graph of relations

Latest Research Output

View more (90)