Harald Leitner

101 - 200 out of 209Page size: 100

Research output

  1. 2009
  2. Published

    Microstructure and mechanical properties of the superalloy ATI Allvac 718PlusTM

    Zickler, G., Schnitzer, R., Radis, R., Hochfellner, R., Schweins, R., Stockinger, M. & Leitner, H., 2009, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. p. 295-303

    Research output: Contribution to journal › Article › Research › peer-review

  3. Published

    Microstructure Evolution during Aging of two different Stainless Maraging Steels

    Schober, M., Schnitzer, R. & Leitner, H., 2009, Proceedings of the 17th IFHTSE Congress. p. 478-481

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  4. Published

    Mikrostrukturelle Charakterisierung von PH 13-8 Mo Maraging-Stählen

    Schnitzer, R., Hochfellner, R., Nöhrer, M., Schober, M., Clemens, H., Zinner, S. & Leitner, H., 2009, In: Practical metallography = Praktische Metallographie. p. 521-536

    Research output: Contribution to journal › Article › Research › peer-review

  5. Published

    On the Recrystallization Behavior of Technically Pure Molybdenum

    Primig, S., Leitner, H., Rodriguez Chavez, A., Clemens, H., Lorich, A., Knabl, W. & Stickler, R., 2009, proc. in 17 th Plansee Seminar. p. 15/1-15/9

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  6. Published

    Precipitation evolution in a Ti-free and Ti-containing stainless maraging steel

    Schober, M., Schnitzer, R. & Leitner, H., 2009, In: Ultramicroscopy. p. 553-562

    Research output: Contribution to journal › Article › Research › peer-review

  7. Published

    Reverted Austenite and its Transformation Behaviour during Deformation in a PH 13-8 Mo Maraging Steel

    Schnitzer, R., Zickler, G., Hochfellner, R., Nöhrer, M., Zinner, S. & Leitner, H., 2009, Proceedings of the 17th IFHTSE Congress. p. 462-465

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  8. Published

    Sensitivity and Quantitativity in Atom Probe Tomography

    Danoix, F., Bostel, A., Leitner, H., Jessner, P., Sauvage, X., Gouné, M. & Danoix, R., 2009, In: Microscopy and microanalysis. p. 258-259

    Research output: Contribution to journal › Article › Research › peer-review

  9. Published

    Short-term creep behavior of a Cr Mo V hot-work tool steel

    Wurmbauer, H., Leitner, H., Panzenböck, M., Scheu, C. & Clemens, H., 2009, In: International journal of materials research : IJMR ; Zeitschrift für Metallkunde. 100, p. 1066-1073

    Research output: Contribution to journal › Article › Research › peer-review

  10. Published

    Small scale materials testing for large scale application

    Stergar, E., Vieh, C., Hosemann, P., Leitner, H. & Maloy, S. A., 2009.

    Research output: Contribution to conference › Poster › Research › peer-review

  11. Published

    Structure-Properties relationship of a PH 13-8 MO Maraging Steel

    Schnitzer, R., Zickler, G., Zinner, S. & Leitner, H., 2009, Proceedings of the 8th International Tooling Conference. p. 491-503

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  12. Published

    Struktur - Eigenschaftsbeziehungen von Maraging-Stählen

    Schnitzer, R., Zinner, S. & Leitner, H., 2009, Forum für Metallurgie und Werktstofftechnik. p. 42-44

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  13. Published

    The morphology of secondary-hardening carbides in a martensitic steel at the peak hardness by 3DFIM

    Akre, J., Danoix, F., Leitner, H. & Auger, P., 2009, In: Ultramicroscopy. 109, p. 518-523

    Research output: Contribution to journal › Article › Research › peer-review

  14. Published

    Thermal stability of high-speed steels as characterized by X-ray diffraction profile analysis

    Leitner, H. & Clemens, H., 2009, In: International journal of materials research : IJMR ; Zeitschrift für Metallkunde. 100, p. 1109-1113

    Research output: Contribution to journal › Article › Research › peer-review

  15. Published

    Thermisches Ätzen zur Bestimmung der Austenitkorngröße in sehr kohlenstoffarmen Stählen

    Pöhl, C., Gamsjäger, E., Leitner, H. & Clemens, H., 2009, In: Practical metallography = Praktische Metallographie. 46, p. 9-23

    Research output: Contribution to journal › Article › Research › peer-review

  16. Published

    Transformation of reverted austenite in a maraging steel under external loading: an in-situ X-ray diffraction study using high-energy synchrotron radiation

    Zickler, G., Schnitzer, R., Hochfellner, R., Lippmann, T., Zinner, S. & Leitner, H., 2009, In: International journal of materials research : IJMR ; Zeitschrift für Metallkunde. p. 1566-1573

    Research output: Contribution to journal › Article › Research › peer-review

  17. Published

    Untersuchungen zur Eigenspannungs- und Verzugsentstehung von induktiv gefügten artfremden Verbunden

    Höggerl, K., Leitner, H. & Ebner, R., 2009, In: HTM - journal of heat treatment and materials . 5, p. 278-284

    Research output: Contribution to journal › Article › Research › peer-review

  18. 2008
  19. Published

    Characterization of δ-phase in superalloy Allvac 718Plus™

    Stotter, C., Sommitsch, C., Wagner, J., Leitner, H., Letofsky-Papst, I., Zickler, G. A., Prantl, W. & Stockinger, M., Apr 2008, In: Zeitschrift fuer Metallkunde/Materials Research and Advanced Techniques. 99, 4, p. 376-380 5 p.

    Research output: Contribution to journal › Article › Research › peer-review

  20. Published

    Characterization of delta-phase in superalloy Allvac 718Plus TM

    Stotter, C., Sommitsch, C., Wagner, J., Leitner, H., Letofsky-Papst, I., Zickler, G., Prantl, W. & Stockinger, M., 2008, In: International journal of materials research : IJMR ; Zeitschrift für Metallkunde. 99, p. 376-380

    Research output: Contribution to journal › Article › Research › peer-review

  21. Published

    Combination of complementary methods for precipitate analysis

    Stergar, E., Eidenberger, E., Staron, P. & Leitner, H., 2008.

    Research output: Contribution to conference › Poster › Research › peer-review

  22. Published

    Computational Analysis of the Precipitation Kinetics in a Complex Tool Steel

    Sonderegger, B., Kozeschnik, E., Leitner, H., Clemens, H., Svoboda, J. & Fischer, F. D., 2008, In: International journal of materials research : IJMR ; Zeitschrift für Metallkunde. 99, p. 410-415

    Research output: Contribution to journal › Article › Research › peer-review

  23. Published

    Influence of aluminium nitride on the high-temperature ductility of continuous cast slabs

    Winkelhofer, F., Parteder, E., Clemens, H., Leitner, H., Spiradek-Hahn, K. & Kozeschnik, E., 2008, In: Practical metallography = Praktische Metallographie. 45, p. 159-172

    Research output: Contribution to journal › Article › Research › peer-review

  24. Published

    In-situ high-temperature characterisation of intermetallic precipitates in a new nickel-based superalloy

    Zickler, G., Schnitzer, R., Schweins, R. & Leitner, H., 2008

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  25. Published

    In-situ high-temperature characterization of intermetallic precipitates in a new nickel-based superalloy

    Zickler, G., Schnitzer, R., Schweins, R. & Leitner, H., 2008.

    Research output: Contribution to conference › Poster › Research › peer-review

  26. Published

    In-situ High-Temperature SAXS Studies of the Precipitation Kinetics in a Fe-Co-Mo Alloy

    Zickler, G., Eidenberger, E., Stergar, E., Leitner, H., Clemens, H., Lippmann, T., Staron, P., Fischer, T., Schreyer, A. & Novak, R., 2008

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  27. Published

    In-situ small-angle X-ray scattering study of the precipitation behavior in a Fe-25 at.%Co-9 at.%Mo alloy

    Zickler, G., Eidenberger, E., Leitner, H., Stergar, E., Clemens, H., Staron, P., Lippmann, T. & Schreyer, A., 2008, In: Materials characterization. 59, p. 1809-1813

    Research output: Contribution to journal › Article › Research › peer-review

  28. Published

    Isothermal aging kinetics of NiAl precipitates in a secondary hardening steel

    Erlach, S., Siller, I., Leitner, H. & Clemens, H., 2008, In: International journal of microstructure and materials properties (IJMMP). 3, p. 373-382

    Research output: Contribution to journal › Article › Research › peer-review

  29. Published

    Kurzzeitkriechverhalten eines Warmarbeitsstahls

    Wurmbauer, H., Scheu, C., Panzenböck, M., Stergar, E., Leitner, H., Clemens, H. & Caliskanoglu, Z. D., 2008, Herausforderungen neuer Werkstoffe an die Forschung und Werkstoffprüfung. p. 251-256

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  30. Published

    Micro Mechanic Testing and Local Electrode Atom Probe Micrscope (LEAP) Measurements on Oxide Dispersed Strengthened (ODS) Alloys

    Hosemann, P., Stergar, E., Vieh, C., Greco, R. R., Leitner, H. & Maloy, S. A., 2008.

    Research output: Contribution to conference › Poster › Research › peer-review

  31. Published

    Microstructure and Mechanical Properties of a Hot-work Tool Steel

    Mayer, S., Scheu, C., Leitner, H., Siller, I. & Clemens, H., 2008.

    Research output: Contribution to conference › Poster › Research › peer-review

  32. Published

    Observation of the precipitation behaviour of Fe-25Co-15Mo by SANS and 3DAP

    Eidenberger, E., Stergar, E., Staron, P., Leitner, H. & Clemens, H., 2008.

    Research output: Contribution to conference › Poster › Research › peer-review

  33. Published

    On the overaging behaviour of tool steel X38CrMoV5-3

    Bischof, M., Staron, P., Caliskanoglu, Z. D., Leitner, H., Scheu, C. & Clemens, H., 2008, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 472, p. 148-152

    Research output: Contribution to journal › Article › Research › peer-review

  34. Published

    Precipitates in a Fe-Co-Mo alloy characterized by complementary methods

    Eidenberger, E., Stergar, E., Leitner, H., Scheu, C., Staron, P. & Clemens, H., 2008, In: Berg- und hüttenmännische Monatshefte : BHM. 153, p. 247-252

    Research output: Contribution to journal › Article › Research › peer-review

  35. Published

    Precipitation behaviour of an Fe-Co-Mo-alloy during non-isothermal ageing

    Leitner, H., Schober, M., Clemens, H., Caliskanoglu, D. & Danoix, F., 2008, In: International journal of materials research : IJMR ; Zeitschrift für Metallkunde. 99, p. 367-374

    Research output: Contribution to journal › Article › Research › peer-review

  36. Published

    Transformation of reverted austenite in a maraging steel under external loading: an in-situ X-Ray diffraction study using high-energy synchrotron radiation

    Zickler, G., Schnitzer, R., Hochfellner, R., Lippmann, T., Zinner, S. & Leitner, H., 2008.

    Research output: Contribution to conference › Poster › Research › peer-review

  37. Published

    Zum Kurzzeitkriechverhalten von Warmarbeitsstählen

    Stergar, E., Panzenböck, M., Leitner, H., Wurmbauer, H., Scheu, C. & Clemens, H., 2008, In: Berg- und hüttenmännische Monatshefte : BHM. p. 342-346

    Research output: Contribution to journal › Article › Research › peer-review

  38. Published

    δ-phase characterization of superalloy Allvac 718 Plus™

    Sommitsch, C., Stotter, C., Leitner, H., Mitsche, S., Letofsky-Papst, I. & Stockinger, M., 2008, TMS2008 - 137th Annual Meeting and Exhibition Supplemental Proceedings: Materials Processing and Properties. p. 63-68 6 p. (TMS Annual Meeting; vol. 2).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  39. Published

    δ-Phase characterization of superalloy allvac 718 PlusTM

    Sommitsch, C., Stotter, C., Leitner, H., Mitsche, S., Letofsky-Papst, I. & Stockinger, M., 2008, TMS 2008. p. 1-6

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  40. 2007
  41. Published

    „DSC Setaram Evo 2400“

    Leitner, H., 2007

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  42. Published

    „Ferritgehaltbestimmung“

    Leitner, H., 2007

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  43. Published

    Gefügecharakterisierung eines Warmarbeitsstahls mit martensitisch-bainitschem Mischgefüge

    Mayer, S., Pölzl, S., Hawranek, G., Scheu, C., Leitner, H., Clemens, H. & Siller, I., 2007, In: Practical metallography = Praktische Metallographie. p. 182-192

    Research output: Contribution to journal › Article › Research › peer-review

  44. Published

    Influence of the Cooling Rate on the Mechanical Properties of a Hot-work Tool Steel

    Mayer, S., Scheu, C., Leitner, H., Clemens, H. & Siller, I., 2007, In: Berg- und hüttenmännische Monatshefte : BHM. 152, p. 132-136

    Research output: Contribution to journal › Article › Research › peer-review

  45. Published

    Kerbschlagbiegeversuche an einem Kettenwerkstoff

    Leitner, H., 2007

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  46. Published

    Kriechen von Warmarbeitsstählen

    Stergar, E., Panzenböck, M. & Leitner, H., 2007.

    Research output: Contribution to conference › Poster › Research › peer-review

  47. Published

    Mikrostruktur einer C/C-CU Verbindung für Erste-Wand-Komponenten des ITER

    Eidenberger, E., Scheu, C., Hawranek, G., Leitner, H., Clemens, H., Pippan, R. & Schedler, B., 2007, In: Practical metallography = Praktische Metallographie. 44, p. 403-412

    Research output: Contribution to journal › Article › Research › peer-review

  48. Published

    On the evolution of secondary hardening carbides in a high-speed steel characterised by APFIM and SANS

    Leitner, H., Clemens, H., Johann, A., Frederik, D. & Staron, P., 2007, In: International journal of materials research : IJMR ; Zeitschrift für Metallkunde. p. 1093-1103

    Research output: Contribution to journal › Article › Research › peer-review

  49. Published

    Optimierung des Aufkohlprozesses von Schneeketten

    Leitner, H., 2007

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  50. Published

    PM mit HM-ähnlichen Eigenschaften bzw. Werkzeugstähle mit höchster Festigkeit und Zähigkeit

    Zuber, M. & Leitner, H., 2007

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  51. Published

    Precipitation reactions during the early stages of aging in a Ni and Al alloyed martensitic medium carbon steel

    Erlach, S. D., Danoix, F., Leitner, H., Auger, P., Siller, I. & Clemens, H., 2007, In: Surface and interface analysis. 39, p. 213-220

    Research output: Contribution to journal › Article › Research › peer-review

  52. Published

    Prüfbericht Dilatometer

    Leitner, H., 2007

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  53. Published

    “Report on Thermodynamic Calculations”

    Leitner, H., 2007

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  54. Published

    “Report on Thermodynamic Calculations - 2"

    Leitner, H., 2007

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  55. Published

    SANS Characterisation of nm-sized Precipitates in a Martensitic Fe-Co-Mo Alloy

    Eidenberger, E., Schober, M., Staron, P., Caliskanoglu, D., Leitner, H., Scheu, C. & Clemens, H., 2007.

    Research output: Contribution to conference › Poster › Research › peer-review

  56. Published

    Spin-misalignment scattering in a precipitation-hardened steel

    Eidenberger, E., Bischof, M., Staron, P., Leitner, H., Michels, A., Granitzer, P., Rumpf, K., Scheu, C. & Clemens, H., 2007.

    Research output: Contribution to conference › Poster › Research › peer-review

  57. Published

    The Influence of Spin-misalignment Scattering on the SANS Data Evolution of Martensitic Age-hardening Steels

    Bischof, M., Staron, P., Michels, A., Granitzer, P., Rumpf, K., Leitner, H., Scheu, C. & Clemens, H., 2007, In: Acta materialia. 55, p. 2637-2646

    Research output: Contribution to journal › Article › Research › peer-review

  58. 2006
  59. Published

    An Experimental and Theoretical Study on the Precipitation Behaviour of a Complex Steel

    Leitner, H., Bischof, M., Clemens, H., Erlach, S. D., Sonderegger, B., Kozeschnik, E., Svoboda, J. & Fischer, F. D., 2006, In: Advanced engineering materials. 8, p. 1066-1077

    Research output: Contribution to journal › Article › Research › peer-review

  60. Published

    Atom-Probe Tomography Investigation of the Precipitation Behavior in a Nickel and Aluminium

    Akre, J., Danoix, F., Erlach, S. D., Leitner, H. & Auger, P., 2006, Tooling Materials and their Application from Research to Market”. Editrice ANCORA, Edited by: M.Rosso, M.Actis Grande and D.Ugues, p. 651-659

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  61. Published

    Characterization and Simulation of Precipitation during Heat Treatment of the Hot-work Tool Steel X38 CrMoV 5-3

    Sonderegger, B., Kozeschnik, E., Bischof, M., Leitner, H., Clemens, H., Svoboda, J. & Fischer, F. D., 2006, Tooling Materials and their Application from Research to Market”. Editrice ANCORA, Edited by: M.Rosso, M.Actis Grande and D.Ugues, p. 553-540

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  62. Published

    Characterization of Nanometer-sized Precipitates in Tool Steels

    Leitner, H. & Clemens, H., 2006, Tooling Materials and their Application from Research to Market”. Editrice ANCORA, Edited by: M.Rosso, M.Actis Grande and D.Ugues, p. 695-706

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  63. Published

    Characterization of the Behavior under Impact Loading of a Maraging Steel Strengthened by nano-Precipitates

    Lach, E., Redjaimia, A., Leitner, H. & Clemens, H., 2006, Proceeding of the 8th International Conference on Mechanical and Physical Behaviour of Materials under Nynamic Loading. p. 1-6

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  64. Published

    Characterization of Wear and Surface Reaction Layer Formation on Aerospace Bearing Steel M50 and a Nitrogen-alloyed Stainless Steel

    Peißl, S. K., Leitner, H., Ebner, R., Hutter, H., Krecar, D. & Rabitsch, R., 2006, In: Journal of ASTM international. 3, p. 1-10

    Research output: Contribution to journal › Article › Research › peer-review

  65. Published

    Charakterisierung der auftretenden Phasen an C/C-Cu Verbindungen - Endbericht

    Scheu, C., Eidenberger, E., Leitner, H. & Clemens, H., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  66. Published

    Charakterisierung und Simulation der Ausscheidungsvorgänge in neuartigen Werkzeugstählen

    Leitner, H., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  67. Published

    Comparison of NiAl precipitation in a medium carbon secondary hardening steel and C-free PH13-8 maraging steel

    Erlach, S. D., Leitner, H., Bischof, M., Clemens, H., Danoix, F., Lemarchand, D. & Siller, I., 2006, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 429, p. 96-106

    Research output: Contribution to journal › Article › Research › peer-review

  68. Published

    Einfluss des Aluminiumgehaltes auf die Gefügeentwicklung eines niedriglegierten TRIP-Stahls

    Spenger, F., Traint, S., Leitner, H. & Clemens, H., 2006, Fortschritte in der Metallographie 38. Werkstoff-Informationsges., p. 215-222

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  69. Published

    Einflussparameter auf die Zähigkeit von Maragingstählen

    Leitner, H., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  70. Published

    Einfluss von Aluminiumnitrid auf die Hochtemperaturduktilität von stranggegossenen Brammen

    Winkelhofer, F., Parteder, E., Leitner, H., Clemens, H., Spiradek-Hahn, K. & Kozeschnik, E., 2006, Fortschritte in der Metallographie 38. Werkstoff-Informationsges., p. 281-288

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  71. Published

    Gefügebewertung an einem martensitischen Werkstoff durch Transmissionselektronenmikroskopie (TEM) und Neutronenkleinwinkelstreuung (SANS)

    Sonnleitner, M., Klein, M., Spiradek-Hahn, K., Staron, P., Leitner, H. & Clemens, H., 2006, Fortschritte in der Metallographie 38. Werkstoff-Informationsges., p. 97-104

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  72. Published

    Gefügecharakterisierung eines Warmarbeitsstahls mit martensitisch-bainitischem Mischgefüge

    Mayer, S., Pölzl, S., Hawranek, G., Scheu, C., Leitner, H., Clemens, H. & Siller, I., 2006, Fortschritte in der Metallographie 38. Werkstoff-Informationsges., p. 379-385

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  73. Published

    Grain refinement in gamma-TiAl-based alloys by solid state phase transformations

    Clemens, H., Bartels, A., Bystrzanowski, S., Chladil, H., Leitner, H., Dehm, G., Gerling, R. & Schimansky, F.-P., 2006, In: Intermetallics. 14, p. 1380-1385

    Research output: Contribution to journal › Article › Research › peer-review

  74. Published

    Isothermal Aging Kinetics of NiAl Precipitates in a Secondary Hardening Steel

    Erlach, S. D., Siller, I., Leitner, H. & Clemens, H., 2006, Tooling Materials and their Application from Research to Market”. Editrice ANCORA, Edited by: M.Rosso, M.Actis Grande and D.Ugues, p. 725-732

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  75. Published

    Metallographische Präparation von Wolfram und Wolframlegierungen zur Gefügeuntersuchung mittels licht- und rasterelektronenmikroskopischer Methoden

    Jedlicka, C., Pölzl, S., Hawranek, G., Leitner, H., Clemens, H., Stickler, R., Hoffmann, A. & Knabl, W., 2006, Fortschritte in der Metallographie 38. Werkstoff-Informationsges., p. 371-378

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  76. Published

    Microstructure and Mechanical Properties of a C/C-Copper Joint Developed for Plasma Facing Components

    Eidenberger, E., Scheu, C., Hawranek, G., Pippan, R., Schedler, B., Leitner, H. & Clemens, H., 2006, In: Advanced engineering materials. 8, p. 1092-1096

    Research output: Contribution to journal › Article › Research › peer-review

  77. Published

    Mikrostruktur einer C/C-Cu Verbindung für Erste Wand Komponenten des Iter

    Eidenberger, E., Scheu, C., Hawranek, G., Pippan, R., Schedler, B., Leitner, H. & Clemens, H., 2006, Fortschritte in der Metallographie 38. Werkstoff-Informationsges., p. 525-530

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  78. Published

    Mikrostrukturelle Untersuchungen an Böhler N710

    Leitner, H., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  79. Published

    Neutronenkleinwinkelstreuung an ausscheidungsgehärteten Stählen

    Eidenberger, E., Bischof, M., Staron, P., Erlach, S. D., Leitner, H., Scheu, C. & Clemens, H., 2006.

    Research output: Contribution to conference › Poster › Research › peer-review

  80. Published

    On the Development of Grain Growth Resistant Tantalum Alloys

    Bischof, M., Mayer, S., Leitner, H., Clemens, H., Staron, P., Geiger, E., Voiticek, A. & Knabl, W., 2006, In: International journal of refractory metals & hard materials. 24, p. 437-444

    Research output: Contribution to journal › Article › Research › peer-review

  81. Published

    Phasenreaktionen in hochcarbidhaltigen Nickelbasislegierungen

    Jönzen, M., Ebner, R., Leitner, H. & Caliskanoglu, D., 2006, In: HTM - journal of heat treatment and materials . 61, p. 121-127

    Research output: Contribution to journal › Article › Research › peer-review

  82. Published

    Phase Transformations in High Niobium and Carbon Containing g-TiAl Based Alloys

    Chladil, H., Clemens, H., Leitner, H., Bartels, A., Gerling, R., Schimansky, F. P. & Kremmer, S., 2006, In: Intermetallics. 14, p. 1194-1198

    Research output: Contribution to journal › Article › Research › peer-review

  83. Published

    Short-time heat treatment of high-speed steels

    Leitner, H., Caliskanoglu, D., Vrtacnik, K. & Clemens, H., 2006, Tooling Materials and their Application from Research to Market”. Editrice ANCORA, Edited by: M.Rosso, M.Actis Grande and D.Ugues, p. 119-126

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  84. Published

    Werkstoffcharakterisierung mittel dreidimensionaler Atomsonde

    Leitner, H. & Clemens, H., 2006, In: Berg- und hüttenmännische Monatshefte : BHM. 151, p. 199-204

    Research output: Contribution to journal › Article › Research › peer-review

  85. Published

    Werkzeugstähle mit höchster Härte und Zähigkeit

    Zuber, M. & Leitner, H., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  86. 2005
  87. Published

    An advanced approach to the characterization of precipitates in tool steels

    Bischof, M. A., Erlach, S. D., Staron, P., Leitner, H. & Clemens, H., 2005, Proc. Solid-Solid Phase Transformations in Inorganic Materials. TMS, p. 8-8

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  88. Published

    Analysis of the Precipitation Behaviour in a High Speed Steel with Small Angle Neutron Scattering

    Leitner, H., Staron, P., Clemens, H., Marsoner, S. & Warbichler, P., 2005, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 398, p. 323-331

    Research output: Contribution to journal › Article › Research › peer-review

  89. Published

    Ausscheidungsverhalten von Maragingstählen

    Leitner, H., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  90. Published

    „Charakterisierung und Simulation der Ausscheidungsvorgänge in neuartigen Werkzeugstählen“ - Jahresbericht

    Leitner, H., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  91. Published

    Charakterisierung von hochniobhältigen Titanaluminid Legierungen

    Chladil, H., Clemens, H. & Leitner, H., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  92. Published

    Combining complementary techniques to study precipitates in steels

    Bischof, M. A., Erlach, S., Staron, P., Leitner, H., Scheu, C. & Clemens, H., 2005, In: Zeitschrift für Metallkunde : international journal of materials research and advanced techniques. 96, p. 1074-1080

    Research output: Contribution to journal › Article › Research › peer-review

  93. Published

    Experimental Studies and Thermodynamic Simulation of Phase Transformations in g-TiAl Based Alloys

    Chladil, H., Clemens, H., Leitner, H., Bartels, A., Gerling, R., Marketz, W. & Kozeschnik, E., 2005, Intergrative and Interdisciplinary Aspects of Intermetallics. Materials Research Society : MRS, p. S5.47.1-S5.47.6

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  94. Published

    Experimental Studies of Phase Transformations in a Carbon Containing Ti-45Al-7.5Nb Alloy and Related Thermodynamic Simulations

    Chladil, H., Clemens, H., Leitner, H., Bartels, A., Gerling, R. & Marketz, W. T., 2005, In: Advanced engineering materials. 7, p. 1131-1134

    Research output: Contribution to journal › Article › Research › peer-review

  95. Published

    Gefügeuntersuchungen an Kupferkabeln

    Leitner, H., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  96. Published

    Massive Transformation in High Niobium Containing TiAl Alloys

    Bartels, A., Bystrzanowski, S., Chladil, H., Leitner, H., Clemens, H., Gerling, R. & Schimansky, F.-P., 2005, Intergrative and Interdisciplinary Aspects of Intermetallics. Materials Research Society : MRS, p. S5.48.1-S5.48.6

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  97. Published

    Microstructural evolution of a rapidly solidified high-speed steel during high temperature annealing

    Stotter, C., Leitner, H., Ebner, R., Ramminger, P. & Brandstätter, E., 2005, Microstructural evolution of a rapidly solidified high-speed steel during high temperature annealing. p. 53-61

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  98. Published

    Microstructure and Mechanical Properties of Si and Y Doped Tantalum

    Bischof, M. A., Mayer, S., Leitner, H., Clemens, H., Pranzas, K., Staron, P., Dehm, G., Knabl, W., Voiticek, A. & Geiger, E., 2005, 16th International Plansee Seminar, (G. Kneringer, P. Rödhammer, H. Wildner, eds.). Plansee AG, p. 489-503

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  99. Published

    Mikrostrukturelle Charakterisierung von Stabelektroden für Entstaubungsanlagen

    Leitner, H., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  100. Published

    On Restricting Aspects in the Production of Nonmagnetic Cr-Mn-N-Alloyed Steels

    Saller, G., Bernauer, J., Leitner, H. & Clemens, H., 2005, In: Steel research international. 76, p. 769-774

    Research output: Contribution to journal › Article › Research › peer-review

  101. Published

    Performance of nano-structured multilayer PVD coating TiAlN/VN in dry high speed milling of aerospace aluminium 7010-T7651

    Luo, Q., Robinson, G., Pittman, M., Howarth, M., Sim, W.-M., Stalley, M. R., Leitner, H., Ebner, R., Caliskanoglu, Z. D. & Hovsepian, P. E., 2005, In: Surface & coatings technology. 200, p. 123-127

    Research output: Contribution to journal › Article › Research › peer-review

  102. Published

    Phasenanalyse von magnetischen Werkstoffen

    Leitner, H., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  103. Published

    Phasenumwandlung von Kunststoffformenstählen - Untersuchungsbericht

    Leitner, H., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  104. Published

    „Plasmagestützte Umwandlung der Martensitschicht“ - Technofit-Projektbericht

    Leitner, H., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  105. Published

    PVD-Hochtemperaturbeschichtung von neuartigen Schnellarbeitsstählen

    Mitterer, C. & Leitner, H., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

Previous 1 2 3 Next
View graph of relations

Latest Research Output

View more (209)