Harald Leitner

(Former)

1 - 100 out of 209Page size: 100

Research output

  1. 2024
  2. Published

    Refined cyclic R-curve determination through residual crack tip stress reduction by annealing

    Walch, L., Klünsner, T., Ressel, G., Marsoner, S. M., Pippan, R., Hackl, A., Leitner, H. & Hohenwarter, A., 27 Jun 2024, In: International Journal of Fatigue. 187.2024, October, 108480.

    Research output: Contribution to journal › Article › Research › peer-review

  3. 2020
  4. Published

    METHOD FOR PRODUCING AN ARTICLE FROM A MARAGING STEEL

    Schnitzer, R. (Inventor) & Leitner, H. (Inventor), 17 Dec 2020, IPC No. C22C 38/ 50 A I, Patent No. US2020392593, Priority date 19 Dec 2018, Priority No. WO2018EP85765

    Research output: Patent

  5. Published

    VERFAHREN ZUM HERSTELLEN EINES GEGENSTANDS AUS EINEM MARAGING-STAHL

    Schnitzer, R. (Inventor) & Leitner, H. (Inventor), 28 Oct 2020, IPC No. C22C 38/ 50 A I, Patent No. EP3728674, Priority date 19 Dec 2018, Priority No. WO2018EP85765

    Research output: Patent

  6. 2019
  7. Published

    Thermomechanical fatigue testing of dual hardening tool steels

    Hofinger, M., Seisenbacher, B., Ognianov, M., Leitner, H., Turk, C., Kapp, M. & Schnitzer, R., 19 Nov 2019, In: Steel research international. p. 1-9

    Research output: Contribution to journal › Article › Research › peer-review

  8. Published

    Verfahren zum Herstellen eines Gegenstands aus einem Maraging-Stahl

    Schnitzer, R. (Inventor) & Leitner, H. (Inventor), 27 Jun 2019, IPC No. C22C 38/ 50 A I, Patent No. DE102017131219, Priority date 22 Dec 2017, Priority No. DE201710131219

    Research output: Patent

  9. Published

    VERFAHREN ZUM HERSTELLEN EINES GEGENSTANDS AUS EINEM MARAGING-STAHL

    Schnitzer, R. (Inventor) & Leitner, H. (Inventor), 27 Jun 2019, IPC No. C22C 38/ 50 A I, Patent No. WO2019121866, Priority date 22 Dec 2017, Priority No. DE201710131219

    Research output: Patent

  10. 2017
  11. E-pub ahead of print

    Atom probe study of B2 order and A2 disorder of the FeCo matrix in an Fe-Co-Mo-alloy

    Turk, C., Leitner, H., Schemmel, I., Clemens, H. & Primig, S., 19 Mar 2017, (E-pub ahead of print) In: Micron. 98.2017, July, p. 24-33 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  12. 2016
  13. Published

    Influence of different types of localized corrosion on the fatigue behavior of an austenitic stainless steel

    Visser, A., Mori, G., Pippan, R., Kapp, M., Fluch, R., Leitner, H., Panzenböck, M. & Holper, B., 1 Jan 2016, NACE International - Corrosion Conference and Expo 2016. p. 3201-3210 10 p. (NACE - International Corrosion Conference Series; vol. 4).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  14. 2014
  15. Published

    Atom probe study of grain boundary segregation on technically pure molybdenum

    Babinsky, K., Weidow, J., Knabl, W., Lorich, A., Leitner, H. & Primig, S., 2014, In: Materials characterization. 87, p. 95-103

    Research output: Contribution to journal › Article › Research › peer-review

  16. Published

    Early stages of precipitation: Experiments and Modelling

    Primig, S., Leitner, H. & Kozeschnik, E., 2014, In: Berg- und hüttenmännische Monatshefte : BHM. 159, p. 5-11

    Research output: Contribution to journal › Article › Research › peer-review

  17. Published

    Einfluss der Präparationstechnik bei der Bestimmung des µ-Phasenanteils in einer Fe-25Co-15Mo Legierung mittels XRD

    Turk, C., Kellezi, G., Leitner, H., Clemens, H. & Primig, S., 2014, Sonderbände der Praktischen Metallographie 46. p. 101-106

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  18. Published

    Influence of deformation on the precipitation behavior of Nb (CN) in austenite and ferrite

    Nöhrer, M., Mayer, W., Primig, S., Zamberger, S., Kozeschnik, E. & Leitner, H., 2014, In: Metallurgical and materials transactions. A, Physical metallurgy and materials science . 45 A, p. 4210-4219

    Research output: Contribution to journal › Article › Research › peer-review

  19. Published

    Microstructural investigation of thermally aged nickel-based superalloy 718Plus

    Whitmore, L., Ahmadi, M. R., Stockinger, M., Povoden-Karadeniz, E., Kozeschnik, E. & Leitner, H., 2014, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 594, p. 253-259

    Research output: Contribution to journal › Article › Research › peer-review

  20. Published

    New findings on the atomistic mechanisms active during mechanical milling of a Fe-Y2O3 model alloy

    Ressel, G., Parz, P., Primig, S., Leitner, H., Clemens, H. & Puff, W., 2014, In: Journal of applied physics. 115, p. 1243131-1243137

    Research output: Contribution to journal › Article › Research › peer-review

  21. Published

    On the behavior of yttria/yttrium during mechanical alloying of a Fe-Y2O3 model alloy system

    Ressel, G., Parz, P., Fian, A., Holec, D., Primig, S., Puff, W., Leitner, H. & Clemens, H., 2014, Advanced Materials Research. p. 598-603

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  22. Published

    On the precipitation mechanism in the molybdenum based alloy MHC (mo-HF-C)

    Lang, D., Pöhl, C., Schatte, J., Primig, S. & Leitner, H., 2014, In: Powder metallurgy progress. 57, p. 311-313

    Research output: Contribution to journal › Article › Research › peer-review

  23. Published

    Precipitation behavior of strain-induced V preicipitates in ferrite at different temperatures in a 0.2wt% carbon steel

    Nöhrer, M., Mayer, W., Zamberger, S., Kozeschnik, E. & Leitner, H., 2014, In: Steel research international. 85, p. 679-688

    Research output: Contribution to journal › Article › Research › peer-review

  24. Published

    Schwingungsrisskorrosion rostfreier austenitischer Stähle in heißen chloridhaltigen Lösungen

    Visser, A., Mori, G., Panzenböck, M., Kapp, M., Leitner, H., Fluch, R. & Holper, B., 2014, In: Berg- und hüttenmännische Monatshefte : BHM. 159, p. 300-301

    Research output: Contribution to journal › Article › Research › peer-review

  25. Published

    The effect of Zr incorporation caused by ball abrasion in a milled Fe-Y2O3 model alloy

    Ressel, G., Primig, S. & Leitner, H., 2014, In: Metallurgical and materials transactions. A, Physical metallurgy and materials science . 45, p. 1552-1558

    Research output: Contribution to journal › Article › Research › peer-review

  26. Published

    The microstructure of heat-treated nickel-based superalloy 718Plus

    Whitmore, L., Ahmadi, M. R., Guetaz, L., Leitner, H., Povoden-Karadeniz, E., Stockinger, M. & Kozeschnik, E., 2014, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 610, p. 39-45

    Research output: Contribution to journal › Article › Research › peer-review

  27. 2013
  28. Published

    Atomistic insights into milling mechanisms in an fe-Y2O3 model alloy

    Ressel, G., Holec, D., Fian, A., Mendez Martin, F. & Leitner, H., 2013, In: Applied physics / A (Series A, Materials science & processing).

    Research output: Contribution to journal › Article › Research › peer-review

  29. Published

    Direct or indirect: Influence of type of retained austenite decomposition during tempering on the toughness of a hot-work tool steel

    Lerchbacher, C., Zinner, S. & Leitner, H., 2013, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 564, p. 163-168

    Research output: Contribution to journal › Article › Research › peer-review

  30. Published

    Einfluss von Aluminium auf das Nitrieren von Schnellarbeitsstählen

    Sackl, S. C., Kellezi, G. & Leitner, H., 2013.

    Research output: Contribution to conference › Poster › Research › peer-review

  31. Published

    Focused ion beam sample preparation of mechanically alloyed iron powders for Atom Probe Tomography

    Mendez Martin, F., Ressel, G. & Leitner, H., 2013.

    Research output: Contribution to conference › Poster › Research › peer-review

  32. Published

    Grain boundary segregations in technically pure molybdenum

    Babinsky, K., Primig, S., Knabl, W., Lorich, A., Weingärtner, T., Weidow, J. & Leitner, H., 2013.

    Research output: Contribution to conference › Poster › Research › peer-review

  33. Published

    Influence of the thermal route on the peak-aged microstructures in an Al-Mg-Si aluminum alloy

    Pogatscher, S., Antrekowitsch, H., Leitner, H., Sologubenko, A. S. & Uggowitzer, P. J., 2013, In: Scripta materialia. 68, p. 158-161

    Research output: Contribution to journal › Article › Research › peer-review

  34. Published

    Metallographic characterization of the molybdenum based alloy MHC by a color etching technique

    Pöhl, C., Schatte, J. & Leitner, H., 2013, In: Materials characterization. 77, p. 63-69

    Research output: Contribution to journal › Article › Research › peer-review

  35. Published

    On the behavior of yttria/yttrium during mechanical alloying of a Fe-Y2O3 model alloy system

    Ressel, G., Parz, P., Fian, A., Holec, D., Primig, S., Puff, W., Leitner, H. & Clemens, H., 2013.

    Research output: Contribution to conference › Poster › Research › peer-review

  36. Published

    On the precipitation mechanism in the molybdenum based alloy MHC

    Lang, D., Pöhl, C., Schatte, J. & Leitner, H., 2013.

    Research output: Contribution to conference › Poster › Research › peer-review

  37. Published

    On the precipitation of Hf-rich carbides in the molybdenum base alloy MHC

    Lang, D., Pöhl, C., Schatte, J. & Leitner, H., 2013.

    Research output: Contribution to conference › Poster › Research › peer-review

  38. Published

    Phase characterization of multi-phase advanced high strength steels

    Hofer, C., Primig, S., Pichler, A., Krammerbauer, J. & Leitner, H., 2013.

    Research output: Contribution to conference › Poster › Research › peer-review

  39. Published

    Solid solution hardening of molybdenum-hafnium alloys: Experiments and Modeling

    Pöhl, C., Schatte, J. & Leitner, H., 2013, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 559, p. 643-650

    Research output: Contribution to journal › Article › Research › peer-review

  40. Published

    Solid solution softening of polycrystalline molybdenum-hafnium alloys

    Pöhl, C., Schatte, J. & Leitner, H., 2013, In: Journal of alloys and compounds. 576, p. 250-256

    Research output: Contribution to journal › Article › Research › peer-review

  41. Published

    Strain induced decomposition and precipitation of carbides in a molybdenum-hafnium-carbon alloy

    Pöhl, C., Lang, D., Schatte, J. & Leitner, H., 2013, In: Journal of alloys and compounds. 579, p. 422-431

    Research output: Contribution to journal › Article › Research › peer-review

  42. Published

    The evolution of Y distribution during the processing route of mechnically alloyed iron studied by means of atom probe tomography

    Ressel, G., Primig, S. & Leitner, H., 2013, In: International journal of materials research : IJMR ; Zeitschrift für Metallkunde. 104, p. 1088-1095

    Research output: Contribution to journal › Article › Research › peer-review

  43. 2012
  44. Published

    Abnormal grain growth in high-speed steels

    Schemmel, I., Martinschitz, C., Leitner, H. & Kellezi, G., 2012, Proceedings of the 9th International Tooling Conference. p. 81-87

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  45. Published

    Atom probe study of the carbon distribution in a hardened martensitic hot-work tool steel X38CrMoV5-1

    Lerchbacher, C., Zinner, S. & Leitner, H., 2012, In: Micron. 43, p. 818-826

    Research output: Contribution to journal › Article › Research › peer-review

  46. Published

    Carbon distribution and its influence on toughness in a hot-work tool steel X38CrMoV5-1

    Lerchbacher, C., Zinner, S. & Leitner, H., 2012.

    Research output: Contribution to conference › Poster › Research › peer-review

  47. Published

    Carbon Distribution and the influence on the tempering behaviour in a hot work tool steel aisi H11

    Lerchbacher, C., Zinner, S. & Leitner, H., 2012, Advanced Materials Research Vol. 409 / THERMEC 2011 Supplement. p. 702-706

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  48. Published

    Influence of interrupted quenching on artificial aging of Al–Mg–Si alloys

    Pogatscher, S., Antrekowitsch, H., Leitner, H., Pöschmann, D., Zhang, Z. & Uggowitzer, P. J., 2012, In: Acta materialia. 60, p. 4496-4505

    Research output: Contribution to journal › Article › Research › peer-review

  49. Published

    Influence of tempering temperature on the corrosion behaviour of plastic mould steels X38CrMo16

    Lerchbacher, C., Zinner, S. & Leitner, H., 2012, In: Berg- und hüttenmännische Monatshefte : BHM. 157, p. 414-419

    Research output: Contribution to journal › Article › Research › peer-review

  50. Published

    Influence of the heating rate on the recrystallization behavior of molybdenum

    Primig, S., Leitner, H., Knabl, W., Lorich, A., Clemens, H. & Stickler, R., 2012, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 535, p. 316-324

    Research output: Contribution to journal › Article › Research › peer-review

  51. Published

    Retained austenite decomposition and carbide formation during tempering a hot-work tool steel X38CrMoV5-1 studied by dilatometry and atom probe tomography

    Lerchbacher, C., Zinner, S. & Leitner, H., 2012, In: Metallurgical and materials transactions. A, Physical metallurgy and materials science . 43, p. 4989-4998

    Research output: Contribution to journal › Article › Research › peer-review

  52. Published

    Static recrystallization of molybdenum after deformation below 0.5TM(K)

    Primig, S., Leitner, H., Knabl, W., Lorich, A. & Stickler, R., 2012, In: Metallurgical and materials transactions. A, Physical metallurgy and materials science . 43, p. 4806-4818

    Research output: Contribution to journal › Article › Research › peer-review

  53. Published

    Textural evolution during dynamic recovery and static recrystallization of molybdenum

    Primig, S., Leitner, H., Knabl, W., Lorich, A., Clemens, H. & Stickler, R., 2012, In: Metallurgical and materials transactions. A, Physical metallurgy and materials science . 43, p. 4794-4805

    Research output: Contribution to journal › Article › Research › peer-review

  54. Published

    The influence of aluminium on the hardening behaviour of high-speed steels

    Kellezi, G. & Leitner, H., 2012, Proceedings of the 9th International Tooling Conference. p. 273-280

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  55. Published

    Transmission electron microscopy of single and double aged 718plus superalloy

    Whitmore, L., Leitner, H., Povoden-Karadeniz, E., Radis, R. & Stockinger, M., 2012, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 534, p. 413-423

    Research output: Contribution to journal › Article › Research › peer-review

  56. 2011
  57. Published

    Application of Photons and Neutrons for the Characterization and Development of Advanced Steels

    Eidenberger, E., Schnitzer, R., Zickler, G., Schober, M., Bischof, M., Staron, P., Leitner, H., Schreyer, A. & Clemens, H., 2011, In: Advanced engineering materials. p. 664-673

    Research output: Contribution to journal › Article › Research › peer-review

  58. Published

    Critical Consideration of Precipitate Analysis of Fe-1 at.% Cu Using Atom Probe and Small-Angle Neutron Scattering

    Schober, M., Eidenberger, E., Staron, P. & Leitner, H., 2011, In: Microscopy and microanalysis. p. 1-8

    Research output: Contribution to journal › Article › Research › peer-review

  59. Published

    Decomposition pathways in age hardening of Ti-Al-N films

    Rachbauer, R., Massl, S., Stergar, E., Holec, D., Kiener, D., Keckes, J., Patscheider, J., Stiefel, M., Leitner, H. & Mayrhofer, P. H., 2011, In: Journal of applied physics. 110, p. 023515-1-023515-10

    Research output: Contribution to journal › Article › Research › peer-review

  60. Published

    Investigation of Cu precipitation in bcc-Fe-Comparison of numerical analysis with experiment

    Warczok, P., Reith, D., Schober, M., Leitner, H., Podloucky, R. & Kozeschnik, E., 2011, In: International journal of materials research : IJMR ; Zeitschrift für Metallkunde. p. 709-716

    Research output: Contribution to journal › Article › Research › peer-review

  61. Published

    Low temperature precipitation kinetics of niobium nitride platelets in Fe

    Deschamps, A., Danoix, F., De Geuser, F., Epicier, T., Leitner, H. & Perez, M., 2011, In: Materials letters. 65, p. 2265-2268

    Research output: Contribution to journal › Article › Research › peer-review

  62. Published

    Mechanisms controlling the artificial aging of Al-Mg-Si Alloys

    Pogatscher, S., Antrekowitsch, H., Leitner, H., Ebner, T. & Uggowitzer, P. J., 2011, In: Acta materialia. 59, p. 3352-3363

    Research output: Contribution to journal › Article › Research › peer-review

  63. Published

    Physical metallurgy of corrosion resistant maraging steels

    Leitner, H., 2011

    Research output: Thesis › Habilitation thesis › peer-review

  64. Published

    Precipitation hardening of biodegradable Fe-Mn-Pd alloys

    Moszner, F., Sologubenko, A. S., Schinhammer, M., Lerchbacher, C., Hänzi, A. C., Leitner, H., Uggowitzer, P. J. & Löffler, J. F., 2011, In: Acta materialia. p. 981-991

    Research output: Contribution to journal › Article › Research › peer-review

  65. Published

    SEM and TEM Investigations of Recovery and Recrystallization in Technically Pure Molybdenum

    Primig, S., Leitner, H., Lorich, A., Knabl, W., Clemens, H. & Stickler, R., 2011, In: Practical metallography = Praktische Metallographie. p. 344-355

    Research output: Contribution to journal › Article › Research › peer-review

  66. Published

    Separation of overlapping retained austenite decomposition and cementite precipitation reactions during tempering of martensitic steel by means of thermal analysis

    Primig, S. & Leitner, H., 2011, In: Thermochimica Acta. p. 111-117

    Research output: Contribution to journal › Article › Research › peer-review

  67. 2010
  68. Published

    3D-Atomsonde zur Charakterisierung von nanostrukturierten Werkstoffen

    Leitner, H., 2010, Handbuch der Nanoanalytik Steiermark 2010. p. 157-160

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  69. Published

    A critical consideration of magnetism and composition of (bcc) Cu precipitates in (bcc) Fe

    Schober, M., Eidenberger, E., Leitner, H., Staron, P., Reith, D. & Podloucky, R., 2010, In: Applied physics / A (Series A, Materials science & processing). p. 697-704

    Research output: Contribution to journal › Article › Research › peer-review

  70. Published

    Analysis of the multistage phase separation reaction in Fe-25 at% Co-9at%Mo

    Eidenberger, E., Schober, M., Schmölzer, T., Stergar, E., Peter, S., Leitner, H. & Clemens, H., 2010, In: Physica status solidi / A. p. 2238-2246

    Research output: Contribution to journal › Article › Research › peer-review

  71. Published

    Behaviour of a maraging steel under quasi-static and dynamic compressive loading

    Lach, E., Schnitzer, R., Leitner, H., Redjaimia, A. & Clemens, H., 2010, In: International journal of microstructure and materials properties (IJMMP). 5, p. 65-78

    Research output: Contribution to journal › Article › Research › peer-review

  72. Published

    Carbon segregation in martensitic hot-work tool steel AISI H11

    Lerchbacher, C., Zinner, S. & Leitner, H., 2010.

    Research output: Contribution to conference › Poster › Research › peer-review

  73. Published

    DIE AUSSCHEIDUNGSKINETIK DER NICKEL-BASIS SUPERLEGIERUNG ATI ALLVAC 718PLUS

    Zickler, G., Schnitzer, R., Radis, R., Kozeschnik, E., Schweins, R., Stockinger, M. & Leitner, H., 2010.

    Research output: Contribution to conference › Poster › Research › peer-review

  74. Published

    Effect of Cu on the evolution of precipitation in an Fe-Cr-Ni-Al-Ti maraging steel

    Schnitzer, R., Schober, M., Zinner, S. & Leitner, H., 2010, In: Acta materialia. 58, p. 3733-3741

    Research output: Contribution to journal › Article › Research › peer-review

  75. Published

    Einfluss der Pulverfraktion auf die Eigenschaften von pulvermetallurgisch hergestelltem Schnellarbeitsstahl

    Zuber, M., Winkler, H., Schweiger, H. & Leitner, H., 2010, In: Berg- und hüttenmännische Monatshefte : BHM. 155, p. 136-141

    Research output: Contribution to journal › Article › Research › peer-review

  76. Published

    Erholungs- und Rekristallisationsverhalten von technisch reinem Molybdän

    Primig, S., Leitner, H., Clemens, H., Stickler, R., Lorich, A., Knabl, W. & Köck, W., 2010, In: Berg- und hüttenmännische Monatshefte : BHM. 155, p. 20-25

    Research output: Contribution to journal › Article › Research › peer-review

  77. Published

    Influence of reverted austenite on static and dynamic mechanical properties of a PH 13-8 Mo maraging steel

    Schnitzer, R., Zickler, G., Erhardt, L., Clemens, H., Zinner, S., Thomas, L. & Leitner, H., 2010, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 527, p. 2065-2070

    Research output: Contribution to journal › Article › Research › peer-review

  78. Published

    In situ small-angle neutron scattering study of the early stages of precipitation in Fe-25at% Co-9at% Mo and Fe-1at% Cu at 500°C

    Staron, P., Eidenberger, E., Schober, M., Sharp, M., Leitner, H., Schreyer, A. & Clemens, H., 2010, In: Journal of physics / Conference series. 247, p. 1-8

    Research output: Contribution to journal › Article › Research › peer-review

  79. Published

    Kinetics of Precipitation in a Complex Hot-Work Tool Steel

    Sonderegger, B., Kozeschnik, E., Leitner, H., Clemens, H., Svoboda, J., Fischer, F. D. & Staron, P., 2010, In: Steel research international. 81, p. 64-73

    Research output: Contribution to journal › Article › Research › peer-review

  80. Published

    Magnetic-field-dependent small-angle neutron scattering on steels

    Zickler, G., Michels, A., Primig, S., Schweins, R. & Leitner, H., 2010

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  81. Published

    Modeling of the yield strength of a stainless maraging steel

    Schnitzer, R., Zinner, S. & Leitner, H., 2010, In: Scripta materialia. p. 286-289

    Research output: Contribution to journal › Article › Research › peer-review

  82. Published

    Nitriding of Metal Powder

    Egger, S., Leitner, H. & Raupenstrauch, H., 2010, Volume I. p. 249-254

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  83. Published

    On the recrystallization behavior of technically pure molybdenum

    Primig, S., Leitner, H., Clemens, H., Lorich, A., Knabl, W. & Stickler, R., 2010, In: International journal of refractory metals & hard materials. p. 703-708

    Research output: Contribution to journal › Article › Research › peer-review

  84. Published

    Precipitation Behavior of Fe-25 At. Pct Co-9 At. Pct Mo Investigated by In-Situ small-Angle Neutron Scattering and Coplementary Methods

    Eidenberger, E., Schober, M., Stergar, E., Leitner, H., Staron, P. & Clemens, H., 2010, In: Metallurgical and materials transactions. A, Physical metallurgy and materials science . p. 1230-1234

    Research output: Contribution to journal › Article › Research › peer-review

  85. Published

    Precipitation behavior of intermetallic NiAl particles in Fe-6 at.%Al-4 at.%Ni analyzed by SANS and 3DAP

    Schober, M., Lerchbacher, C., Eidenberger, E., Staron, P., Clemens, H. & Leitner, H., 2010, In: Intermetallics. p. 1553-1559

    Research output: Contribution to journal › Article › Research › peer-review

  86. Published

    Reverted austenite in PH 13-8 Mo maraging steels

    Schnitzer, R., Radis, R., Nöhrer, M., Schober, M., Hochfellner, R., Zinner, S., Povoden-Karadeniz, E., Kozeschnnik, E. & Leitner, H., 2010, In: Materials chemistry and physics (including materials science communications ; an international interdisciplinary journal on science, characterization and processing of advanced materials). p. 138-145

    Research output: Contribution to journal › Article › Research › peer-review

  87. Published

    SEM and TEM investigations of recovery and recrystallization in Technically pure Molybdenum

    Primig, S., Leitner, H., Lorich, A., Knabl, W., Clemens, H. & Stickler, R., 2010, Fortschritte in der Metallographie. Werkstoff-Informationsges., p. 289-294

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  88. Published

    Short-term Creep Behavior of an X 37 Cr Mo V 5-1 Hot-work Tool Steel with almost Bainitic and fully Martensitic Microstructures

    Wurmbauer, H., Leitner, H., Panzenböck, M., Scheu, C. & Clemens, H., 2010, In: Steel research international. p. 569-575

    Research output: Contribution to journal › Article › Research › peer-review

  89. Published

    Short-term creep behavior of chromium rich hot-work tool steels

    Wurmbauer, H., Panzenböck, M., Leitner, H., Scheu, C. & Clemens, H., 2010, In: Materialwissenschaft und Werkstofftechnik. 41, p. 18-28

    Research output: Contribution to journal › Article › Research › peer-review

  90. Published

    Small Scale Mechanical Testing and local electrode atom probe measurements on new materials for nuclear application

    Stergar, E., Nelson, A. T., Leitner, H. & Hosemann, P., 2010, Fortschritte in der Metallographie. Werkstoff-Informationsges., p. 397-402

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  91. Published

    Solid solution hardening of molybdenum alloys manufactured by powder metallurgy

    Pöhl, C., Leitner, H., Schatte, J. & Wesemann, I., 2010.

    Research output: Contribution to conference › Poster › Research › peer-review

  92. Published

    Spinodal decomposition in Fe-25 at%Co-9 at%Mo

    Eidenberger, E., Schober, M., Staron, P., Caliskanoglu, D., Leitner, H. & Clemens, H., 2010, In: Intermetallics. p. 2128-2135

    Research output: Contribution to journal › Article › Research › peer-review

  93. Published

    Splitting phenomenon in the precipitation evolution in an Fe-Ni-Al-Ti-Cr stainless steel

    Leitner, H., Schober, M. & Schnitzer, R., 2010, In: Acta materialia. 58, p. 1261-1269

    Research output: Contribution to journal › Article › Research › peer-review

  94. Published

    The influence of aging treatments on the precipitation behavior in the nickel-based superalloy 718Plus

    Zickler, G., Primig, S., Lerchbacher, C., Nöhrer, M., Leitner, H. & Eckerlebe, H., 2010

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  95. Published

    The Precipitation Behavior of Superalloy ATI Allvac 718Plus

    Zickler, G., Radis, R., Schnitzer, R., Kozeschnik, E., Stockinger, M. & Leitner, H., 2010, In: Advanced engineering materials. p. 176-183

    Research output: Contribution to journal › Article › Research › peer-review

  96. Published

    Transformation from continuous to isothermal aging applied on a maraging steel

    Primig, S. & Leitner, H., 2010.

    Research output: Contribution to conference › Poster › Research › peer-review

  97. Published

    Transformation from continuous-to-isothermal aging applied on a maraging steel

    Primig, S. & Leitner, H., 2010, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 527, p. 4399-4405

    Research output: Contribution to journal › Article › Research › peer-review

  98. Published

    Transformation of reverted austenite in a maraging steel studied by in-situ X-ray diffrcation

    Zickler, G., Schnitzer, R., Lippmann, T. & Leitner, H., 2010.

    Research output: Contribution to conference › Poster › Research › peer-review

  99. 2009
  100. Published

    Changes in Tempering and its Effect on Precipitation Behaviour in a Hot-work Tool Steel

    Mayer, S., Leitner, H., Scheu, C., Siller, I. & Clemens, H., 2009, In: Steel research international. 80, p. 89-95

    Research output: Contribution to journal › Article › Research › peer-review

  101. Published

    Characterisation of precipitates in a maraging steel

    Zickler, G., Primig, S., Leitner, H., Sharp, M. & Eckerlebe, H., 2009

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  102. Published

    Characterization of Reverted Austenite during Prolonged Ageing of Maraging Steel Corrax

    Höring, S., Abou-Ras, D., Wanderka, N., Leitner, H., Clemens, H. & Banhart, J., 2009, In: Steel research international. 80, p. 84-88

    Research output: Contribution to journal › Article › Research › peer-review

  103. Published

    Combined use of small-angle neutron scattering and atom probe tomography for the analysis of precipitates in a Fe-15 m%CO-25 m%Mo alloy

    Eidenberger, E., Stergar, E., Leitner, H., Staron, P., Spitaler, J., Draxl, C. & Clemens, H., 2009, In: Applied physics / A (Series A, Materials science & processing). 97, p. 331-340

    Research output: Contribution to journal › Article › Research › peer-review

  104. Published

    Correlation between heat treatment, microstructure and mechanical properties of a hot-work tool steel

    Mayer, S., Scheu, C., Leitner, H., Siller, I. & Clemens, H., 2009, In: International journal of materials research : IJMR ; Zeitschrift für Metallkunde. 100, p. 86-91

    Research output: Contribution to journal › Article › Research › peer-review

  105. Published

    Effect of a cryogenic treatment on the mechanical Properties of Tool steels

    Kellezi, G., Leitner, H. & Marsoner, S., 2009, Proceedings of the 8th International Tooling Conference. p. 859-868

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  106. Published

    Experimental Studies and Thermodynamic Simulations of Phase Transformations in Ti-(41-45) Al-4Nb-1Mo-0.1B Alloys

    Clemens, H., Böck, B., Wallgram, W., Schmölzer, T., Drössler, L. M., Zickler, G., Leitner, H. & Otto, A., 2009, Experimental Studies and Thermodynamic Simulations of Phase Transformations in Ti-(41-45) Al-4Nb-1Mo-0.1B Alloys. Materials Research Society : MRS, p. 115-120

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  107. Published

    Influence of alloying elements on the martensitic and bainitic structure of hot work Tool steels

    Siller, I., Mayer, S., Caliskanoglu, D. & Leitner, H., 2009, Proceedings of the 8th International Tooling Conference. p. 635-642

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  108. Published

    Influence of heat treatment on the microstructure and toughness of din 1.2083 - type plastic mould steels

    Perko, J., Leitner, H., Strobl, V., Schneider, R. & List, M., 2009, Proceedings of the 8th International Tooling Conference. p. 597-609

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  109. Published

    Influence of powder nitriding on the microstructure of a ledeburitic Tool steel

    Zuber, M., Schweiger, H. & Leitner, H., 2009, Proceedings of the 8th International Tooling Conference. p. 345-355

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  110. Published

    In-situ X-ray diffraction study of the transformation of reverted austenite in the maraging steel PH 13-8 Mo

    Zickler, G., Schnitzer, R., Hochfellner, R., Lippmann, T., Zinner, S. & Leitner, H., 2009

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  111. Published

    Investigations on the Precipitation Kinetics of a FeMoCr alloy

    Stergar, E., Eidenberger, E., Zickler, G., Leitner, H. & Caliskanoglu, Z. D., 2009.

    Research output: Contribution to conference › Poster › Research › peer-review

Previous 1 2 3 Next
View graph of relations

Latest Research Output

View more (209)