Harald Harmuth

101 - 150 out of 295Page size: 50

Research output

  1. 2015
  2. Published

    Growth and shrinkage of particles in slags

    Gamsjäger, E., Kircher, V. & Harmuth, H. (Co-editor), 2015.

    Research output: Contribution to conference › Presentation › Research › peer-review

  3. Published

    HIGH TEMPERATURE MICROSCOPIC INVESTIGATIONS IN THE FIELD OF CERAMICS – AN OVERVIEW

    Kircher, V., Kölbl, N., Marschall, I. & Harmuth, H., 2015, Mitteilungen der Österreichischen Mineralogischen Gesellschaft. Ö. M. G. (ed.). Wien: Eigenverlag, Vol. 161. p. 59 1 p.

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  4. Published

    INFLUENCE OF CREEP ON THE THERMOMECHANICAL BEHAVIOR OF A RH-SNORKEL

    Jin, S., Harmuth, H. (Co-editor), Gruber, D. (Co-editor) & Roessler, R. (Co-editor), 2015, UNITERC 2015.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  5. Published

    Influence of specimen shape and the specimen/pressure plate interface on the cold crushing strength

    Gruber, D., Harmuth, H., Urbanek, G. & Sharma, V., 2015, UNITECR 2015. 14th Biennial Worldwide Congress (ed.). Wien, 5 p. 96

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  6. Published

    In situ observation of slag crystallization

    Kölbl, N., Harmuth, H. & Kircher, V., 2015, Mitteilungen der Österreichischen Mineralogischen Gesellschaft. Österreichische Mineralogische Gesellschaft (ed.). Wien: Eigenverlag, Vol. 161. p. 64 1 p.

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  7. Published

    Interaction steel/slag/submerged entry nozzle and its impact on refractory wear - thermochemical process simulation

    Harmuth, H. & Xia, G., 2015, In: ISIJ international. 55, 4, p. 775-780 6 p.

    Research output: Contribution to journal › Article › Research › peer-review

  8. Published

    Investigation of Magnesia Chromite Brick Wear Phenomena - Post Mortem Analysis From a Lead Recycling Furnace

    Gregurek, D., Majcenovic, C., Reinharter, K., Reiter, V., Wenzl, C., Spanring, A. & Harmuth, H., 2015, In: RHI bulletin : the journal of refractory innovations. 2/2015, p. 24-28 5 p.

    Research output: Contribution to journal › Article › Research › peer-review

  9. Published

    Investigation of refractories for the bottom casting of special steel grades / Untersuchung von Feuerfeststoffen für den steigenden Guss von Spezialstählen

    Auer, T., Harmuth, H. & Löcker, C., 2015. 1 p.

    Research output: Contribution to conference › Paper › peer-review

  10. Published

    Nonoxides in ordinary refractory ceramics - phases, compositions and analysis

    Atzenhofer, C., Gschiel, S. & Harmuth, H., 2015, Mitteilungen der Österreichischen Mineralogischen Gesellschaft. Österreichische Mineralogische Gesellschaft (ed.). Wien: Eigenverlag, Vol. 161. p. 17 1 p.

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  11. Published

    Phase formation in mould powders and mould slags during service

    Marschall, I. & Harmuth, H., 2015, Mitteilung der Österreichischen Mineralogischen Gesellschaft. Österreichische Mineralogische Gesellschaft (ed.). Wien: Eigenverlag, Vol. 161. p. 83 1 p.

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  12. Published

    Phase formation in mould powders and mould slags during service

    Marschall, I. & Harmuth, H., 2015.

    Research output: Contribution to conference › Presentation › Research › peer-review

  13. Published

    Premature wear in the hearth of a blast furnance and its diminution by the application of titanium dioxide

    Fünders, D., Harmuth, H. & Pötschke, J., 2015, UNITECR 2015. 14th Biennial Worldwide Congress (ed.). Wien, 3 p. 62

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  14. Published

    TENSILE AND COMPRESSIVE CREEP TESTING OF REFRACTORIES AT SERVICE RELATED LOADS

    Sidi Mammar, A., Jin, S., Harmuth, H. & Gruber, D., 2015, UNITERC 2015. 14th Biennial Worldwide Congress (ed.). 1 p. 186

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  15. Published

    Toward CFD Modeling of Slag Entertainment in Gas Stirred Ladles

    Huang, A., Harmuth, H., Doletschek, M., Vollmann, S. & Feng, X., 2015, In: Steel research international. 86, 12, p. 1447-1454 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  16. Published

    Wear of magnesia bricks in the permanent lining of a ladle tank degassing unit

    Harmuth, H., Auer, T. & Bertignol, M., 2015, UNITECR 2015. 14th Biennial Worldwide Congress (ed.). Wien, 3 p. 90

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  17. 2014
  18. Published

    Change of mold slag composition during slab casting of steel with high Al content

    Harmuth, H. & Xia, G., 24 Oct 2014, In: Berg- und hüttenmännische Monatshefte : BHM. 159, 11, p. 447-453

    Research output: Contribution to journal › Article › Research

  19. Published

    Thermomechanical behavior of steel ladle linings and the influence of insulations

    Gruber, D. & Harmuth, H., 1 Apr 2014, In: Steel research international. 85, 4, p. 512-518 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  20. Published

    A laser irradiation disc test for fracture testing of refractory fine ceramics

    Gruber, D. & Harmuth, H., 2014, In: Journal of the European Ceramic Society. 34, p. 4021-4029

    Research output: Contribution to journal › Article › Research › peer-review

  21. Published

    Change of mold slag composition during slab casting of steel with high Al content

    Harmuth, H. & Xia, G., 2014, 8th European Continuous Casting Conference. p. 952-961

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  22. Published

    Compressive creep testing of refractories at elevated loads-Device, material law and evaluation techniques

    Jin, S., Harmuth, H. & Gruber, D., 2014, In: Journal of the European Ceramic Society. 34, p. 4037-4042

    Research output: Contribution to journal › Article › Research › peer-review

  23. Published

    Creep testing of refractories at service related load levels and application for material simulation

    Jin, S., Harmuth, H. & Gruber, D., 2014, Advances in Science and Technology. p. 221-225

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  24. Published

    Determination of Young's modulus, fracture energy and tensile strength of refractories by inverse estimation of a wedge splitting procedure

    Jin, S., Gruber, D. & Harmuth, H., 2014, In: Engineering Fracture Mechanics. 116, p. 228-236

    Research output: Contribution to journal › Article › Research › peer-review

  25. Published

    Fractographic and Fracture Mechanical Invstigations of Refractories under Different Loading Conditions

    Harmuth, H. & Tschegg, E. K., 2014, In: China's refractories. 23, p. 19-23

    Research output: Contribution to journal › Article › Research › peer-review

  26. Published

    Impact of an increase of Al2O3, TiO2 and ZrO2 on mold slag properties

    Kircher, V., Marschall, I., Kölbl, N. & Harmuth, H., 2014, Proceedings - 8th European Continuous Casting Conference. p. 1050-1059

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  27. Published

    Mathematical Modelling of Slag Entrainment in a Gas Stirred Ladle by LES

    Huang, A., Vollmann, S. & Harmuth, H., 2014, 10th India International Refractories Congress - IREFCON14. p. 200-203

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  28. Published

    Optimisation of monolithic lining concepts of channel induction furnace

    Jin, S., Gruber, D., Harmuth, H., Soudier, J., Meunier, P. & lemaistre, H., 2014, In: International journal of cast metals research. 27, 6, p. 336 - 340

    Research output: Contribution to journal › Article › Research › peer-review

  29. Published

    Refractory Corrosion by Dissolution in Slags - Challenges and Trends of Present Fundamental Research

    Harmuth, H. & Vollmann, S., 2014, In: Iron & [and] steel review. 58, 4, p. 157 - 170

    Research output: Contribution to journal › Article › Research › peer-review

  30. Published

    Simulation of refractory fracture as a tool for advanced material testing

    Harmuth, H., Gruber, D. & Jin, S., 2014, Advances in Science and Technology . Vol. 92. p. 232-241

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  31. Published

    Steel ladle linings – key issues regarding thermomechanical behaviour

    Gruber, D. & Harmuth, H., 2014, In: RHI bulletin : the journal of refractory innovations. p. 19-23

    Research output: Contribution to journal › Article › Research › peer-review

  32. Published

    Thermochemical wear of refractory linings associated to gas firing in metallurgical plants

    Rieger, J., Drozd-Rys, M., Weiß, C. & Harmuth, H., 2014, In: Steel research international. 85, p. 527-536

    Research output: Contribution to journal › Article › Research › peer-review

  33. Published

    Thermomechanical Behaviour of Steel Ladle Linings and the Influence of Insulations

    Gruber, D. & Harmuth, H., 2014, In: Steel research international. 85, p. 512-518

    Research output: Contribution to journal › Article › Research › peer-review

  34. 2013
  35. Published

    The mechanical fracture characterization of non-linear flexible ceramics using digital image correlation

    Belrhiti, Y., Pop, I. O., Doumalin, P., Dupre, J. C., Auer, T., Gruber, D., Harmuth, H., Huger, M. & Chotard, T., 1 Jan 2013, p. 3587-3595. 9 p.

    Research output: Contribution to conference › Paper › peer-review

  36. Published

    A Glance on Turbulence Modelling in Simulating Bubble Stirred Ladle Flow

    Pirker, S., König, B., Puttinger, S., Doletschek, M. & Harmuth, H., 2013, In: Berg- und hüttenmännische Monatshefte : BHM. p. 472-474

    Research output: Contribution to journal › Article › Research › peer-review

  37. Published

    Investigation of Continuous Casting Slag Films Sampled on Site and Comparison with Laboratory Results

    Marschall, I., Kölbl, N., Harmuth, H. & Xia, G., 2013, In: Journal for manufacturing science & production. 13, p. 103-114

    Research output: Contribution to journal › Article › Research › peer-review

  38. Published

    Main Mechanisms of SEN Slag Band Corrosion as Observed by Post Mortem Investigations

    Harmuth, H., Kircher, V., Kölbl, N., Antczak, M. & Xia, G., 2013, Proceedings of the Unified International Technical Conference on Refractories: UNITECR 2013. p. 000730-000735

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  39. Published

    Marangoni Convection as a Contribution to Refractory Corrosion - CFD Simulation and Analytical Approaches

    Vollmann, S. & Harmuth, H., 2013, Marangoni Convection as a Contribution to Refractory Corrosion - CFD Simulation and Analytical Approaches. p. 000781-000786

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  40. Published

    Simulation of the steel ladle preheating process

    Drozd-Rys, M., Harmuth, H. & Rössler, R., 2013, Simulation of the steel ladle preheating process. p. 764-769

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  41. Published

    Tensile behaviour of magnesia-spinel refractories: Comparison of tensile and wedge splitting tests

    Grasset-Bourdel, R., Alzina, A., Huger, M., Chotard, T., Obenaus-Emler, R., Gruber, D. & Harmuth, H., 2013, In: Journal of the European Ceramic Society. 33, p. 913-923

    Research output: Contribution to journal › Article › Research › peer-review

  42. Published

    Thermochemischer Angriff von Rauchgaskomponenten auf die Feuerfestausmauerung und den Stahlmantel metallurgischer Anlagen

    Rieger, J., Drozd-Rys, M., Weiß, C. & Harmuth, H., 2013, In: Berg- und hüttenmännische Monatshefte : BHM. 158, p. 466-467

    Research output: Contribution to journal › Article › Research › peer-review

  43. Published

    Thermomechanical Behaviour of Steel Ladle Linings and the Influence of Insulations

    Gruber, D. & Harmuth, H., 2013, In: Berg- und hüttenmännische Monatshefte : BHM. 158, p. 470-471

    Research output: Contribution to journal › Article › Research › peer-review

  44. Published

    The Role of Turbulence Modelling in Picturing Gas Stirred Steel Ladle Flow

    Doletschek, M., Pirker, S. & Harmuth, H., 2013, The Role of Turbulence Modelling in Picturing Gas Stirred Steel Ladle Flow. p. 1-8

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  45. Published

    Towards Modelling of Slag Entrainment in Gas Stirred Ladles by LES

    Huang, A., Vollmann, S. & Harmuth, H., 2013, Towards Modelling of Slag Entrainment in Gas Stirred Ladles by LES. p. 1-10

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  46. 2012
  47. Published

    CFD Simulation of Mass Transfer Coefficients Relevant for Refractory Wear

    Vollmann, S. & Harmuth, H., 2012, In: Interceram / Refractories manual. p. 19-21

    Research output: Contribution to journal › Article › Research › peer-review

  48. Published

    Comparison of High Temperature Methods for the Investigation of Melting and Crystallisation Behaviour of Mould Powders

    Kölbl, N., Marschall, I., Harmuth, H., Buchberger, B. & Reiter, J., 2012, FRAY INTERNATIONAL SYMPOSIUM. p. 381-394

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  49. Published

    Corrosion mechanisms of SEN slagband materials

    Harmuth, H., Kölbl, N., Rollinger, B. & Xia, G., 2012, Proceedings of the 6th international symposium on refractories. p. 477-480

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  50. Published

    For an Educational and Industrial Partnership in a Coopetitive World: FIRE

    Rigaud, M., Zhou, N. & Harmuth, H., 2012, Proceedings of the 6th international symposium on refractories. p. 61-63

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  51. Published

    Fractographic and fracture mechanical investigations of refractories under different loading conditions

    Harmuth, H. & Tschegg, E. K., 2012, Proceedings of the 6th international symposium on refractories. p. 485-488

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  52. Published

    Influence of thermal damage occurrence at microstructural scale on the thermomechanical behaviour of magnesia-spinel refractories

    Grasset-Bourdel, R., Alzina, A., Huger, M., Chotard, T., Gruber, D. & Harmuth, H., 2012, In: Journal of the European Ceramic Society. 32, p. 989-999

    Research output: Contribution to journal › Article › Research › peer-review

  53. Published

    Investigation of continuous casting slag films sampled on site and comparison with laboratory results

    Marschall, I., Kölbl, N., Harmuth, H. & Xia, G., 2012, Ninth International Conference on Molten Slags, Fluxes and Salts (Molten 12). p. 1-14

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  54. Published

    Investigation of MgALON formation under different conditions and refractory application

    Gschiel, S., Harmuth, H., Lences, Z., Sajgalik, P. & Ye, G., 2012, Proceedings of the 6th international symposium on refractories. p. 489-492

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

Previous 1 2 3 4 5 6 Next
View graph of relations

Contact

Phone: 3200

Latest Research Output

View more (295)