Gerhard Winter

1 - 50 out of 78Page size: 50

Research output

  1. 2025
  2. Published

    Impact of tensile specimen properties on hydrogen embrittlement testing using hollow specimens

    Oberreiter, P., Winter, G., Grun, F. & Drexler, A., 12 Feb 2025.

    Research output: Contribution to conference › Presentation › Research › peer-review

  3. 2023
  4. Published

    Thermomechanische Ermüdung von warmfesten Stählen

    Winter, G. & Grun, F., 20 Sept 2023.

    Research output: Contribution to conference › Presentation › Research

  5. Published

    Experimental and numerical investigation of the deep rolling process focussing on 34CrNiMo6 railway axles

    Pertoll, T., Buzzi, C., Dutzler, A., Leitner, M., Seisenbacher, B., Winter, G. & Boronkai, L., 24 Jul 2023, In: International journal of material forming. 16.2023, 5, 22 p., 51.

    Research output: Contribution to journal › Article › Research › peer-review

  6. Published

    Impacts of nano-clay particles and heat-treating on out-of-phase thermo-mechanical fatigue characteristics in piston aluminum-silicon alloys

    Bahmanabadi, H., Azadi, M., Dadashi, A., Torkian, J., Parast, M. S. A., Winter, G. & Grün, F., 22 Jun 2023, In: Frattura ed Integrita Strutturale. 17.2023, 65, p. 224-245 22 p.

    Research output: Contribution to journal › Article › Research › peer-review

  7. 2022
  8. Published

    Influence of T6 heat-treating and over-ageing on out-of-phase thermo-mechanical fatigue behaviors of Al-Si-Cu alloy

    Khisheh, S., Azadi, M., Hendoabadi, V. Z., Parast, M. S. A., Winter, G., Seisenbacher, B., Grün, F. & Khalili, K., Dec 2022, In: Materials Today Communications. 33.2022, December, 12 p., 104803.

    Research output: Contribution to journal › Article › Research › peer-review

  9. Published

    Very high cycle fatigue assessment at elevated temperature of 100 µm thin structures made of high-strength steel X5CrNiCuNb16-4

    Himmelbauer, F., Winter, G., Seisenbacher, B., Grün, F. & Kiesling, C., 12 Oct 2022, In: Journal of Materials Research and Technology. 21.2022, November-December, p. 1811-1829 19 p.

    Research output: Contribution to journal › Article › Research › peer-review

  10. Published

    On the Transferability of Fatigue and Cyclic Deformation Data to 100 µm Thin Structures

    Himmelbauer, F., Winter, G., Grün, F. & Kiesling, C., 15 Sept 2022, In: Metals. 12.2022, 9, 22 p., 1524.

    Research output: Contribution to journal › Article › Research › peer-review

  11. Published

    VHCF properties and assessment of specimens and thin-walled component-like structures made of high-strength steel X5CrNiCuNb16-4

    Himmelbauer, F., Winter, G., Grün, F. & Kiesling, C., 19 Feb 2022, In: International Journal of Fatigue. 156.2022, March, 10 p., 106645.

    Research output: Contribution to journal › Article › Research › peer-review

  12. Published

    Cyclic hardening/softening experimental data in nano-clay-composite and aluminum alloy under high-temperature strain-controlled loading

    Azadi, M., Bahmanabadi, H., Grün, F., Winter, G. & Seisenbacher, B., 9 Feb 2022, In: Experimental Results. 3.2022, e6, 32 p.

    Research output: Contribution to journal › Article › Research › peer-review

  13. Published

    Fatigue life assessment and modelling of the cyclic material behaviour of a high-strength martensitic steel

    Himmelbauer, F., Seisenbacher, B., Winter, G., Grün, F. & Kiesling, C., 2022, LCF9 Ninth International Conference on Low Cycle Fatigue.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  14. 2021
  15. Published

    Effect of nano-clay addition and heat treatment on tensile and stress-controlled low-cycle fatigue behaviors of aluminum-silicon alloy

    Azadi, M., Dadashi, A., Winter, G., Seisenbacher, B. & Grün, F., Jul 2021, In: Frattura ed Integrità Strutturale . 15.2021, 57, p. 373-397 25 p.

    Research output: Contribution to journal › Article › Research › peer-review

  16. Published

    A novel high-frequency fatigue testing methodology for small thin-walled structures in the HCF/VHCF regime

    Himmelbauer, F., Tillmanns, M., Winter, G., Grün, F. & Kiesling, C., May 2021, In: International Journal of Fatigue. 146, 146, 10 p., 106146.

    Research output: Contribution to journal › Article › Research › peer-review

  17. 2020
  18. E-pub ahead of print

    Investigation and simulation of the age-dependent behaviour of an aluminium alloy under thermomechanical loading

    Seisenbacher, B., Winter, G. & Grün, F., 15 Oct 2020, (E-pub ahead of print) In: Mechanics of materials. 151.2020, December, 11 p., 103612.

    Research output: Contribution to journal › Article › Research › peer-review

  19. Published

    Evaluation of tensile and low-cycle fatigue properties at elevated temperatures in piston aluminum-silicon alloys with and without nano-clay-particles and heat treatment

    Azadi, M., Bahmanabadi, H., Grün, F. & Winter, G., 11 May 2020, In: Materials Science and Engineering A. 788.2020, 24 June, 16 p., 139497.

    Research output: Contribution to journal › Article › Research › peer-review

  20. Published

    Modelling the effect of ageing on the yield strength of an aluminium alloy under cyclic loading at different ageing temperatures and test temperatures

    Seisenbacher, B., Winter, G. & Grün, F., 13 Apr 2020, In: International Journal of Fatigue. 137.2021, August, 9 p., 105635.

    Research output: Contribution to journal › Article › Research › peer-review

  21. Published

    Influence of specimen diameter size on the deformation behaviour and short-term strength range of an aluminum alloy

    Seisenbacher, B., Klösch, R., Winter, G. & Grün, F., Apr 2020, In: MP materials testing : Materialprüfung . 62.2020, 4, p. 345-350 6 p.

    Research output: Contribution to journal › Article › Research › peer-review

  22. Published

    Material behaviour of a dual hardening steel under thermomechanical loading

    Seisenbacher, B., Hofinger, M., Winter, G. & Grün, F., Jan 2020, In: Fatigue & fracture of engineering materials & structures : Fatigue and fracture of engineering materials and structures. 43.2020, 1, p. 191-200 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  23. 2019
  24. Published

    Consideration of ageing effects during the TMF test on the stress-strain behaviour of an aluminium alloy

    Seisenbacher, B., Winter, G. (Co-editor) & Grün, F. (Co-editor), 2019.

    Research output: Contribution to conference › Abstract

  25. 2018
  26. Published

    Validation of a new high frequency testing technique in the VHCF regime – Fatigue properties of a 42CrMoS4 and X5CrNiCuNb16-4 steel

    Milošević, I., Renhart, P., Winter, G., Grün, F. & Kober, M., 1 Jul 2018, In: International Journal of Fatigue. 112, p. 198-205 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  27. Published

    Fatigue life assessment regarding different influences on the HCF/VHCF behavior of a martensitic steel

    Milosevic, I., Seisenbacher, B., Winter, G., Grün, F. & Kober, M., 25 May 2018, In: MATEC Web of Conferences . 165, p. 20004 1 p.

    Research output: Contribution to journal › Article › Research › peer-review

  28. Published

    Improved Approach to Determine the Material Parameters for a Combined Hardening Model

    Seisenbacher, B., Winter, G. & Grun, F., 16 Apr 2018, In: Materials sciences and applications : MSA.

    Research output: Contribution to journal › Article › Research › peer-review

  29. 2017
  30. E-pub ahead of print

    Effects of Inclusions on the Very High Cycle Fatigue Properties of a High Strength Martensitic Steel within the Transition Area

    Milosevic, I., Garb, C., Winter, G., Grun, F. & Kober, M., 12 Dec 2017, (E-pub ahead of print) In: Procedia Structural Integrity. 7.2017, p. 327-334 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  31. Published

    Influence of the stress gradient on the fatigue life calculation of a martensitic high strength steel

    Milosevic, I., Winter, G., Grün, F. & Kober, M., 1 Oct 2017, In: Frattura ed Integrità Strutturale . 2017, 42, 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  32. E-pub ahead of print

    Simulation of lamellar cast iron components under TMF-loads

    Strohhäussl, B., Stoschka, M., Winter, G. & Grün, F., 24 Aug 2017, (E-pub ahead of print) In: Materials Today: Proceedings. 4.2017, 5, Part 1, p. 5957-5962 6 p.

    Research output: Contribution to journal › Article › Research › peer-review

  33. E-pub ahead of print

    A new high frequency testing method for steels under tension/compression loading in the VHCF regime

    Milosevic, I., Renhart, P., Winter, G., Grün, F. & Kober, M., 17 Jul 2017, (E-pub ahead of print) In: International Journal of Fatigue. 104.2017, November, p. 150-157 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  34. Published

    A first proposal of a new high frequency testing method for high strength steels under tension / compression loading in the VHCF regime

    Milosevic, I., Winter, G., Grun, F. & Kober, M., 2017, VHCF7 - Seventh International Conference on Very High Cycle Fatigue.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  35. 2016
  36. Published

    Parameter Optimization of a Deformation Model for Grey Cast iron

    Strohhäussl, B., Milosevic, I., Winter, G. & Grün, F., 21 Sept 2016.

    Research output: Contribution to conference › Poster › Research › peer-review

  37. Published

    Parameter Optimization of a Deformation Model for Grey Cast iron

    Strohhäussl, B., Winter, G. & Grün, F., 20 Sept 2016, The 33rd Danubia Adria Symposium: Advances in Experimental Mechanics. p. 50-51 2 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  38. Published

    Influence of size effect and stress gradient on the high-cycle fatigue strength of a 1.4542 steel

    Milosevic, I., Winter, G., Grun, F. & Kober, M., 2016, In: Procedia Engineering. 160, p. 61-68

    Research output: Contribution to journal › Article › Research › peer-review

  39. Published

    Influence of Size Effect and Stress Gradient on the High-cycle Fatigue Strength of a 1.4542 Steel

    Milosevic, I., Winter, G., Grün, F. & Kober, M., 2016, In: Procedia Engineering. 160, p. 61-68

    Research output: Contribution to journal › Article › Research › peer-review

  40. Published

    Influence of Size Effect and Stress Gradient on the High-cycle Fatigue Strength of a 1.4542 Steel

    Milosevic, I., Winter, G., Grün, F. & Kober, M., 2016, p. 61-68.

    Research output: Contribution to conference › Presentation › Research › peer-review

  41. 2015
  42. Published

    Damage prediction for un-coated and coated aluminum alloys under thermal and mechanical fatigue loadings based on a modified plastic strain energy approach: Lightweight Materials and Structural Solutions for Transport Applications

    Azadi, M., Farrahi, G. H., Winter, G., Huter, P. & Eichlseder, W., 5 Feb 2015, In: Materials and Design. 66, 5, p. 587 595 p.

    Research output: Contribution to journal › Article › Research › peer-review

  43. 2014
  44. Published

    Assessment of the effect of tensile Overloads on the Fatigue Behaviour of quenched and tempered Steel

    Garb, C., Strohhaüssl, B., Winter, G. & Grün, F., 1 Jan 2014, 31st Danubia-Adria Symposium on Advances in Experimental Mechanics, DAS 2014 - Proceedings. p. 30-31 2 p. (31st Danubia-Adria Symposium on Advances in Experimental Mechanics, DAS 2014 - Proceedings).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  45. Published

    Assessment of the effect of tensile overloads on the fatigue behaviour of quenched and tempered steel

    Garb, C., Grün, F., Winter, G. & Strohhäussl, B., 2014.

    Research output: Contribution to conference › Poster › Research › peer-review

  46. Published

    Comparison of microstructural crack paths between hypo-eutectic Al-Si-Cu and Al-Si-Mg cast alloys in high plasticity regimes under rotating bending

    Huter, P., Winter, G., Renhart, P., Schwab, M., Oberfrank, S., Grün, F. & Stauder, B., 2014, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 618, p. 578-585

    Research output: Contribution to journal › Article › Research › peer-review

  47. 2013
  48. Published

    A new small scale rock cutting test

    Entacher, M., Lorenz, S., Winter, G. & Galler, R., 2013, Proceedings EUROCK2013. p. 0-5

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  49. Published

    Bauteilprüfungen der Verbindung Kupplungskorn und Zahnrad

    Wohlfahrt, M. & Winter, G., 2013

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  50. Published

    Cutter force measurement on tunnel boring machines - Implementation at Koralm tunnel

    Entacher, M., Winter, G. & Galler, R., 2013, In: Tunnelling and Underground Space Technology. 38, p. 487-496

    Research output: Contribution to journal › Article › Research › peer-review

  51. Published

    Komponentenprüfung von Kegelrädern

    Wohlfahrt, M., Winter, G. & Godor, I., 2013

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  52. 2012
  53. Published

    1st Preliminary Report - Sehitoglu Material Characterisation of cast iron and cupper based alloys

    Huter, P. & Winter, G., 2012

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  54. Published

    Cutter force measurement on tunnel boring machines - System design

    Entacher, M., Winter, G., Bumberger, T., Decker, K., Godor, I. & Galler, R., 2012, In: Tunnelling and Underground Space Technology. p. 97-106

    Research output: Contribution to journal › Article › Research › peer-review

  55. Published

    Measurement of Cutting Forces on Tunnel Boring Machines

    Entacher, M., Winter, G., Bumberger, T., Godor, I. & Galler, R., 2012, 3rd Fatigue Symposium - Lightweight Design. p. 352-371

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  56. Published

    Monitoring von Schneidwerkzeugen - Ermittlung der Krafteinwirkung auf Disken

    Entacher, M., Winter, G., Bumberger, T. & Galler, R., 2012.

    Research output: Contribution to conference › Poster › Research › peer-review

  57. Published

    Valuation of TMF Lifetime Calculation Methods and their Limitations of Usabililty

    Köberl, H., Winter, G. & Eichlseder, W., 2012, Key engineering materials. Vol. 488-489. p. 403-406 (Key engineering materials).

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  58. 2011
  59. Published

    Comparision of Energy-Based and Damage-Related Fatigue Life Models for Aluminium Components Under TMF Loading

    Eichlseder, W., Winter, G., Gänser, H.-P., Minichmayr, R. & Riedler, M., 2011, Recent Trends in Processing and Degration of Aluminium Alloys. p. 329-346

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  60. Published

    Numerische Modellierung des Verformungszustandes hochbelasteter Abbauwerkzeuge von Tunnelbohrmaschinen

    Bumberger, T., Entacher, M., Winter, G., Godor, I. & Galler, R., 2011, Tagungsband "Berechnungsverfahren in der Geotechnik - Versagensmechanismen und Parameterentwicklung". p. 88-94

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  61. Published

    Numerische Modellierung des Verformungszustandes hochbelasteter Abbauwerkzeuge von Tunnelbohrmaschinen

    Bumberger, T., Entacher, M., Winter, G., Godor, I. & Galler, R., 2011, In: Berg- und hüttenmännische Monatshefte : BHM. p. 492-497

    Research output: Contribution to journal › Article › Research › peer-review

  62. Published

    TMF Lifetime Calculation Methods and their Limitations of Usability

    Köberl, H., Winter, G. & Eichlseder, W., 2011.

    Research output: Contribution to conference › Poster › Research › peer-review

  63. 2010
  64. Published

    Liftime Calculation of thermo-Mechanically Loaded Materials (Al, Cu, Ni, and Fe Alloys) Based un Empirical Methods

    Köberl, H., Winter, G. & Eichlseder, W., 2010, In: Journal of ASTM international. Vol. 8, p. 1-11

    Research output: Contribution to journal › Article › Research › peer-review

  65. 2009
  66. Published

    Energiebasierende Lebensdauerbewertung von Nickellegierungen

    Köberl, H., Winter, G. & Eichlseder, W., 2009, In: Materialprüfung. 5/2009, p. 276-286

    Research output: Contribution to journal › Article › Research › peer-review

Previous 1 2 Next
View graph of relations

Contact

Phone: 1409

Latest Research Output

View more (78)