Francisca Mendez Martin

(Former)

51 - 74 out of 74Page size: 50

Research output

  1. 2015
  2. Published

    Mechanical properties, microstructure and thermal stability of a nanocrystalline CoCrFeMnNi high-entropy alloy after severe plastic deformation

    Schuh, B., Mendez Martin, F., Völker, B., George, E. P., Clemens, H., Pippan, R. & Hohenwarter, A., 2015, In: Acta materialia. 96, p. 258-268

    Research output: Contribution to journal › Article › Research › peer-review

  3. Published

    Metallography - A Powerful Instrument for Material Characterisation, Material Development and Failure Analysis

    Panzenböck, M., Hawranek, G., Mendez Martin, F., Mayer, S., Pölzl, S., Schütz, P., Primig, S., Rashkova, B. & Clemens, H., 2015.

    Research output: Contribution to conference › Presentation › Research › peer-review

  4. Published

    Phase changes observed on AlCr composite cathodes after exposure to cathodic arc plasmas in N2 and O2 atmospheres

    Franz, R., Mendez Martin, F., Hawranek, G. & Polcik, P., 2015.

    Research output: Contribution to conference › Presentation › Research

  5. Published

    Phase decomposition of a nanocrystalline CoCrFeMnNi high-entropy alloy

    Schuh, B., Hohenwarter, A., Mendez Martin, F., Clemens, H., Völker, B., Pippan, R. & George, E. P., 2015.

    Research output: Contribution to conference › Poster › Research

  6. Published

    Phase decomposition of a nanocrystalline CoCrFeMnNi high-entropy alloy

    Schuh, B., Hohenwarter, A., Mendez Martin, F., Clemens, H., George, E. P., Völker, B. & Pippan, R., 2015.

    Research output: Contribution to conference › Presentation › Research

  7. Published

    The role of metallography in the development and characterization of high-performance materials

    Mayer, S., Hawranek, G., Mendez Martin, F., Panzenböck, M., Pölzl, S., Primig, S., Rashkova, B. & Clemens, H., 2015, In: Practical metallography = Praktische Metallographie. 52.2015, 2, p. 59-74 6 p.

    Research output: Contribution to journal › Article › Research › peer-review

  8. Published

    The use of atom probe tomography for the characterization and development of intermetallic γ-TiAl based alloys

    Klein, T., Schachermayer, M., Mendez Martin, F., Holec, D., Rashkova, B., Schöberl, T., Clemens, H. & Mayer, S., 2015.

    Research output: Contribution to conference › Presentation › Research › peer-review

  9. Published

    Versagen von feuerverzinkten Stahlbauteilen

    Panzenböck, M., Mendez Martin, F., Rashkova, B., Schütz, P. & Kaiser, R., 2015, Sonderbänder der praktischen Metallographie 47. p. 203-208

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  10. Published

    Versagen von feuerverzinkten Stahlbauteilen - Gefüge und Versagen von Werkstoffen

    Panzenböck, M., Mendez Martin, F., Rashkova, B., Schütz, P., Kaiser, R., Spiradek-Hahn, K. & Brabetz, M., 2015.

    Research output: Contribution to conference › Presentation › Research › peer-review

  11. 2014
  12. Published

    Advanced Steels

    Clemens, H., Primig, S., Mendez Martin, F., Babinsky, K., Hofer, C., Lang, D., Sackl, S. C., Turk, C. & Weißensteiner, I., 2014.

    Research output: Contribution to conference › Poster › Research › peer-review

  13. Published

    Alloying element distribution within the constituent phases of a C-containing γ-TiAl based alloy studied by atom probe tomography

    Klein, T., Mendez Martin, F., Schachermayer, M., Schöberl, T., Rashkova, B., Clemens, H. & Mayer, S., 2014.

    Research output: Contribution to conference › Presentation › Research › peer-review

  14. Published

    Atom probe investigations in low carbon steel on Arvedi endless strip production line

    Mendez Martin, F. & Bragin, S., 2014.

    Research output: Contribution to conference › Poster › Research › peer-review

  15. Published

    Cu diffusion into single-crystalline TiN studied by transmission electron microscopy and atom probe tomography

    Mühlbacher, M., Mendez Martin, F., Sartory, B., Schalk, N., Keckes, J., Lu, J., Hultman, L. & Mitterer, C., 2014.

    Research output: Contribution to conference › Presentation › Research › peer-review

  16. Published

    Die Rolle der Metallographie bei Entwicklung und Charakterisierung von Hochleistungswerkstoffen

    Mayer, S., Hawranek, G., Mendez Martin, F., Panzenböck, M., Pölzl, S., Primig, S., Rashkova, B. & Clemens, H., 2014, Sonderbände der Praktischen Metallographie 46. p. 3-12

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  17. Published

    Diffusion studies in epitaxial TiN/Cu layers on MgO(001) by high resolution TEM and APT

    Mühlbacher, M., Mendez Martin, F., Sartory, B., Schalk, N., Keckes, J., Lu, J., Hultman, L. & Mitterer, C., 2014.

    Research output: Contribution to conference › Poster › Research › peer-review

  18. Published

    Distribution of alloying elements within the constituent phases of a C-containing gamma-TiAl based alloy studied by atom probe tomography: Mater. Res. Soc. Symp. Proc. Vol.1760 2014 Materials Research Society

    Klein, T., Mendez Martin, F., Schachermayer, M., Rashkova, B., Clemens, H. & Mayer, S., 2014

    Research output: Non-textual form › Web publication/site › Research

  19. Published

    High Performance Materials

    Clemens, H., Primig, S., Mendez Martin, F., Babinsky, K., Hofer, C., Lang, D., Sackl, S. C., Turk, C. & Weißensteiner, I., 2014.

    Research output: Contribution to conference › Poster › Research › peer-review

  20. Published

    High-rate deposition of AlTiN and related coatings with dense morphology by central cylindrical direct current magnetron sputtering

    Jilek, Jr., M., Jilek,, M., Mendez Martin, F., Mayrhofer, P. H. & Veprek, S., 2014, In: Thin solid films. 556, p. 361-368

    Research output: Contribution to journal › Article › Research › peer-review

  21. Published

    Influence of microstructure on diffusion barrier properties of TiN investigated by TEM and APT

    Mühlbacher, M., Mendez Martin, F., Sartory, B., Lu, J., Schalk, N., Lars, H. & Mitterer, C., 2014.

    Research output: Contribution to conference › Presentation › Research › peer-review

  22. Published

    Oxygen impurity related hardening mechanisms of Ti-Al-N thin films

    Riedl, H., Koller, C., Rachbauer, R., Kolozsvari, S., Mendez Martin, F. & Mayrhofer, P. H., 2014.

    Research output: Contribution to conference › Poster › Research › peer-review

  23. Published

    Phase and interstitial element characterization via atom probe tomography in a multi-phase TiAl based alloy

    Mendez Martin, F., Klein, T., Schachermayer, M., Clemens, H. & Mayer, S., 2014.

    Research output: Contribution to conference › Presentation › Research › peer-review

  24. 2013
  25. Published

    Atomistic insights into milling mechanisms in an fe-Y2O3 model alloy

    Ressel, G., Holec, D., Fian, A., Mendez Martin, F. & Leitner, H., 2013, In: Applied physics / A (Series A, Materials science & processing).

    Research output: Contribution to journal › Article › Research › peer-review

  26. Published

    Focused ion beam sample preparation of mechanically alloyed iron powders for Atom Probe Tomography

    Mendez Martin, F., Ressel, G. & Leitner, H., 2013.

    Research output: Contribution to conference › Poster › Research › peer-review

  27. Published

    Interfacial and inter- diffusion studies of epitaxial TiN/Cu layers on MgO (001) - A comprehensive approach by high resolution TEM and APT

    Mühlbacher, M., Mendez Martin, F., Sartory, B., Keckes, J., Lu, J., Lars, H. & Mitterer, C., 2013.

    Research output: Contribution to conference › Presentation › Research › peer-review

Previous 1 2 Next
View graph of relations

Latest Research Output

View more (74)