Florian Planitzer

(Former)

1 - 39 out of 39Page size: 100

Research output

  1. 2012
  2. Published

    A finite element model for carburisation of surface densified PM components

    Eck, S., Ishmurzin, A., Wlanis, T., Ebner, R., Hatzenbichler, T. & Planitzer, F., 2012, In: International journal of computational materials science and surface engineering. 5, 1, p. 16-30

    Research output: Contribution to journal › Article › Research › peer-review

  3. Published

    Deviation of the results obtained from different commercial finite element solvers due to friction formulation

    Hatzenbichler, T., Harrer, O.-K., Wallner, S., Planitzer, F., Kuss, M., Pschera, R. & Buchmayr, B., 2012, In: Tribology International. 49, p. 75-79

    Research output: Contribution to journal › Article › Research › peer-review

  4. 2011
  5. Published

    Entwicklung umformtechnischer Verfahren zum Nachverdichten von Sinterformteilen

    Planitzer, F., 2011, 403 p.

    Research output: Thesis › Doctoral Thesis

  6. 2010
  7. Published

    Effect of different contact formulations used in commercial FEM software packages on the results of hot forging simulations

    Hatzenbichler, T., Buchmayr, B., Harrer, O.-K. & Planitzer, F., 2010, In: Metallurgia Italiana. 11-12, p. 11-15

    Research output: Contribution to journal › Article › Research › peer-review

  8. Published

    Projektbericht 09 (August) zum Projekt A3.5

    Planitzer, F., 2010

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  9. Published

    Projektbericht 10 (Juni) zum Projekt A3.5

    Planitzer, F., 2010

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  10. Published

    Projektstand September 2010 zum Projekt A3.5

    Planitzer, F., 2010

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  11. Published

    Projektstatus Juni 2010 zum Projekt A3.5

    Planitzer, F., Hatzenbichler, T., Planitzer, C. & Schiller, W., 2010

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  12. 2009
  13. Published

    Charakterisierung eines Radialschmiedeprozesses zum Oberflächenverdichten von P/M Zahnrädern mittels FEM

    Planitzer, F., Hatzenbichler, T. & Buchmayr, B., 2009, Charakterisierung eines Radialschmiedeprozesses zum Oberflächenverdichten von P/M Zahnrädern mittels FEM. p. 9-18

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  14. Published

    Effect of different contact formulations used in commercial FEM-Software Packages on the results of hot forging simulations

    Hatzenbichler, T., Harrer, O.-K., Buchmayr, B. & Planitzer, F., 2009,

    Hot forming of Steels & Product Properties

    .     p. 1-8

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  15. Published

    FEM-Supported Development of a Radial Forging Process for Surface Densification of P/M Gears

    Planitzer, F., Hatzenbichler, T. & Buchmayr, B., 2009, FEM-Supported Development of a Radial Forging Process for Surface Densification of P/M Gears. AIP Press, p. 1-4

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  16. Published

    FEM-Supported Development of a Radial Forging Process for Surface Densification of P/M Gears

    Planitzer, F., Hatzenbichler, T. & Buchmayr, B., 2009, In: International journal of material forming. 2, p. 93-96

    Research output: Contribution to journal › Article › Research › peer-review

  17. Published

    Investigation of a Cogging Process for Surface Densification of PM Gears by FEM Simulation

    Planitzer, F., Hatzenbichler, T. & Buchmayr, B., 2009,

    Proceedings of the MPIF/APMI International Conference on Powder Metallurgy & Particulate Materials

    .     p. 0-0

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  18. Published

    Projektbericht 05 (Jänner) zum Projekt A3.5

    Planitzer, F., 2009

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  19. Published

    Projektbericht 05 (Juli) zum Projekt A3.5

    Planitzer, F., 2009

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  20. Published

    Projektstatus April 2009 zum Projekt A3.5

    Hatzenbichler, T. & Planitzer, F., 2009

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  21. Published

    Projektstatus Jänner 2009 zum Projekt A3.5

    Hatzenbichler, T. & Planitzer, F., 2009

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  22. Published

    Projektstatus Juni 2009 zum Projekt A3.5

    Hatzenbichler, T. & Planitzer, F., 2009

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  23. Published

    Projektstatus November 2009 zum Projekt A3.5

    Hatzenbichler, T. & Planitzer, F., 2009

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  24. Published

    Projektstatus Oktober 2009 zum Projekt A3.5

    Hatzenbichler, T. & Planitzer, F., 2009

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  25. Published

    Projektstatus September 2009 zum Projekt A3.5

    Hatzenbichler, T. & Planitzer, F., 2009

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  26. Published

    Reduction of Porosity in PM Components by Metal Forming Technologies

    Hatzenbichler, T., Buchmayr, B. & Planitzer, F., 2009, COMET MPPE Workshop Damage, Materials Center Leoben. p. 1-11

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  27. 2008
  28. Published

    Alternative Verfahren zum Nachverdichten von Zahnrädern aus P/M - Werkstoffen

    Planitzer, F., 2008

    Research output: Thesis › Diploma Thesis

  29. Published

    Oberflächenverdichten von P/M-Zahnrädern durch Radialschmieden

    Planitzer, F., Hatzenbichler, T. & Buchmayr, B., 2008, In: Berg- und hüttenmännische Monatshefte : BHM. 153, p. 430-434

    Research output: Contribution to journal › Article › Research › peer-review

  30. Published

    Projektbericht 1/2008 zum Projekt A3.5

    Planitzer, F., 2008

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  31. Published

    Projektstatus April 2008 zum Projekt A3.5

    Hatzenbichler, T. & Planitzer, F., 2008

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  32. Published

    Projektstatus Februar 2008 zum Projekt A3.5

    Hatzenbichler, T. & Planitzer, F., 2008

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  33. Published

    Projektstatus Juli 2008 zum Projekt A3.5

    Hatzenbichler, T. & Planitzer, F., 2008

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  34. Published

    Projektstatus Mai 2008 zum Projekt A3.5

    Hatzenbichler, T. & Planitzer, F., 2008

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  35. Published

    Projektstatus September 2008 zum Projekt A3.5

    Hatzenbichler, T. & Planitzer, F., 2008

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  36. 2007
  37. Published

    Erster und zweiter Projektbericht Jänner 2007 Diplomarbeit Florian Planitzer zum Projekt: NK021-05

    Hatzenbichler, T. & Planitzer, F., 2007

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  38. Published

    Experimentelle Validierung von FEM-Rechnungen zur Spannungs- und Temperaturanalyse von Werkzeugen beim Kupfer-Strangpressen

    Krumphals, F., Wlanis, T., Planitzer, F. & Sommitsch, C., 2007, Experimentelle Validierung von FEM-Rechnungen zur Spannungs- und Temperaturanalyse von Werkzeugen beim Kupfer-Strangpressen. p. 65-74

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  39. Published

    Projektendbericht Dezember 2007 zum Projekt NK021-05

    Hatzenbichler, T. & Planitzer, F., 2007

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  40. Published

    Projektendpräsentation September 2007 zum Projekt NK021-05

    Planitzer, F., 2007

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  41. Published

    Projektpräsentation Oktober 2007 zum Projekt NK021-05

    Hatzenbichler, T. & Planitzer, F., 2007

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  42. Published

    Projektstatus Dezember 2007 zum Projekt NK021-05

    Hatzenbichler, T. & Planitzer, F., 2007

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  43. 2006
  44. Published

    Bestimmung von Materialparametern für poröse Werkstoffe

    Hatzenbichler, T., Planitzer, F., Buchmayr, B., Köppl, R. & Ecker, W., 2006, XXV. Verformungskundliches Kolloquium. p. 239-247

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  45. Published

    Determination of Material Parameters for porous Materials

    Hatzenbichler, T., Planitzer, F., Buchmayr, B., Köppl, R. & Ecker, W., 2006, ESAFORM 2006. p. 155-158

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  46. Published

    Modellierung des Aluminium- und Kupfer-Strangpressens unter dem Aspekt der Lebensdauervorhersage der Werkzeuge und Rezipienten – Teil 2

    Sommitsch, C., Wlanis, T., Krumphals, F. & Planitzer, F., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

View graph of relations

Latest Research Output

View more (39)