Florian Arbeiter

121 - 140 out of 178Page size: 20

Research output

  1. 2017
  2. Published

    Special Binder Systems for the Use with Metal Powders for Highly Filled Filaments for Fused Filament Fabrication

    Gonzalez-Gutierrez, J., Kukla, C., Arbeiter, F. & Holzer, C., 14 Dec 2017, 33rd Annual Meeting of the Polymer Processing Society. Cancun, Mexico, Vol. 33. 1 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  3. Published

    Experimental methods to characterize the nonlinear elastic plastic fracture behaviour of polymers, as a starting point for the description of multi-layered structures

    Gosch, A., Arbeiter, F. & Pinter, G. G., 10 Sept 2017.

    Research output: Contribution to conference › Abstract

  4. Published

    Material behavior of carboxylated nitrile butadiene rubber (XNBR) in dependence on crosslinker and medium

    Fleischmann, D. D., Arbeiter, F., Schlögl, S. & Kern, W., 5 Sept 2017.

    Research output: Contribution to conference › Poster › Research

  5. E-pub ahead of print

    Shrinkage and Warpage Optimization of Expanded-Perlite-Filled Polypropylene Composites in Extrusion-Based Additive Manufacturing

    Spörk, M., Sapkota, J., Weingrill, G., Fischinger, T., Arbeiter, F. & Holzer, C., 4 Jul 2017, (E-pub ahead of print) In: Macromolecular materials and engineering. 302.2017, 10, 13 p., 1700143.

    Research output: Contribution to journal › Article › Research › peer-review

  6. E-pub ahead of print

    Parametric optimization of intra- and inter-layer strengths in parts produced by extrusion-based additive manufacturing of poly(lactic acid)

    Spörk, M., Arbeiter, F., Cajner, H., Sapkota, J. & Holzer, C., 26 Jun 2017, (E-pub ahead of print) In: Journal of Applied Polymer Science. 134.2017, 41, 15 p., 45401.

    Research output: Contribution to journal › Article › Research › peer-review

  7. Published

    FILLER CONTENT AND PROPERTIES OF HIGHLY FILLED FILAMENTS FOR FUSED FILAMENT FABRICATION OF MAGNETS

    Gonzalez-Gutierrez, J., Duretek, I., Arbeiter, F., Kukla, C. & Holzer, C., 9 May 2017, ANTEC® 2017. Anaheim, California, USA, 4 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  8. Published

    Influence of long-term annealing on residual stress distribution and quasi-brittle failure properties of talcum reinforced pipe grade polypropylene

    Arbeiter, F., Pinter, G. & Frank, A., 9 May 2017.

    Research output: Contribution to conference › Paper › peer-review

  9. Published

    Characterization of slow crack growth resistance of polyethylene pipe grades with cyclic cracked round bar (CRB) test in correlation to strain hardening (SH) test

    Berger, I. J., Frank, A., Arbeiter, F. & Pinter, G., 8 May 2017.

    Research output: Contribution to conference › Paper › peer-review

  10. Published

    The Cyclic Cracked Round Bar Test as a new standard for accelerated material ranking of polyethylene pipe grades

    Frank, A., Berger, I. J., Arbeiter, F. & Pinter, G., 8 May 2017.

    Research output: Contribution to conference › Paper › peer-review

  11. Published

    Properties of glass filled polypropylene for Fused Filament Fabrication

    Spörk, M., Savandaiah, C., Arbeiter, F., Schuschnigg, S. & Holzer, C., May 2017.

    Research output: Contribution to conference › Paper › peer-review

  12. Published

    Fracture mechanics methods to assess the lifetime of thermoplastic pipes

    Arbeiter, F., Pinter, G., Lang, R. W. & Frank, A., 2017, Springer Series in Materials Science. Springer Berlin, Vol. 247. p. 33-54 22 p. (Springer Series in Materials Science; vol. 247).

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  13. Published

    Influence of long-term annealing on residual stress distribution and quasi-brittle failure properties of talcum reinforced pipe grade polyproyplene

    Arbeiter, F. J., Pinter, G. & Frank, A., 2017, 75th Annual Technical Conference and Exhibition of the Society of Plastics Engineers, SPE ANTEC Anaheim 2017. Vol. 2017-May. p. 1989-1993 5 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  14. 2016
  15. Published

    Cranial Polypropylene Implants by Fused Filament Fabrication

    Katschnig, M., Arbeiter, F., Haar, B., von Campe, G. & Holzer, C., 2 Dec 2016, In: Advanced engineering materials. 19.2017, 4, 5 p., 1600676.

    Research output: Contribution to journal › Article › Research › peer-review

  16. Published

    Influence of molecular structure and reinforcement on fatigue behavior of tough polypropylene materials

    Arbeiter, F., Frank, A. & Pinter, G. G., 10 Oct 2016, In: Journal of Applied Polymer Science. 133.2016, 38, 16 p., 43948.

    Research output: Contribution to journal › Article › Research › peer-review

  17. Published

    Bonding Forces in Fused Filament Fabrication

    Spörk, M., Schuschnigg, S., Holzer, C., Arbeiter, F. & Berger, G., 23 Sept 2016.

    Research output: Contribution to conference › Abstract › peer-review

  18. Published

    Fast comparison of different polymeric pipe materials: Extending the use of the cyclic CRB-Test (ISO 18489)

    Arbeiter, F., 14 Sept 2016. 1 p.

    Research output: Contribution to conference › Presentation › Research

  19. Published

    Lifetime Prediction of PE100 and PE100 RC Pipes based on Slow Crack Growth Resistance

    Frank, A., Berger, I. J., Hutař, P., Arbeiter, F. & Pinter, G., 14 Sept 2016, Proceedings of the 18th Plastic Pipes Conference. Plastics Pipes Conference Association, Vol. 18. 11 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  20. Published

    POLYPROPYLENE MULTI-LAYER-PIPES - 100 YEAR LIFETIME ASSESSMENT USING LINEAR ELASTIC FRACTURE MECHANICS

    Pappler, U., Arbeiter, F. & Pinter, G., 14 Sept 2016, Proceedings of the 18th Plastic Pipes Conference . Plastics Pipes Conference Association, Vol. 18. 10 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  21. Published

    FAST COMPARISON OF DIFFERENT POLYMERIC PIPE MATERIALS: EXTENDING THE USE OF THE CYCLIC CRBTEST (ISO 18489)

    Arbeiter, F., Pinter, G. & Frank, A., Sept 2016, Proceedings of the 18th Plastic Pipes Conference. Plastics Pipes Conference Association, Vol. 18. 10 p. 118

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  22. E-pub ahead of print

    Fracture toughness of high density polyethylene: Fatigue pre-cracking versus femtolaser, razor sharpening and broaching

    Salazar, A., Rodríguez, J., Arbeiter, F., Pinter, G. G. & Martínez, A. B., 13 Jul 2016, (E-pub ahead of print) In: Engineering Fracture Mechanics. 149.2015, November, p. 199-213 15 p.

    Research output: Contribution to journal › Article › Research › peer-review

Previous 1...3 4 5 6 7 8 9 Next
View graph of relations

Contact

Phone: 2122

Curriculum vitae

Florian Arbeiter public CV

Latest Research Output

View more (178)