Clemens Holzer

251 - 300 out of 376Page size: 50

Research output

  1. 2013
  2. Published

    Influence of Chain Extender on the Foaming Behavior and on the Mechanical Properteis of Physically Foamed PLA

    Mostafa, H., Geißler, B., Uray, A., Laske, S., Holzer, C. & Langecker, G., 2013.

    Research output: Contribution to conference › Poster › Research › peer-review

  3. Published

    Influence of chain extender on the foaming behaviour and the mechanical properties of physically foamed PLA

    Geißler, B., Mostafa, H., Uray, A., Laske, S., Holzer, C. & Langecker, G., 2013, The 29th International Conference of The Polymer Processing Society (PPS-29). p. 120-125

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  4. Published

    Influence of different fillers on the processing behaviour and mechanical properties of physically foamed polyethylene

    Geißler, B., Laske, S., Holzer, C. & Langecker, G., 2013, The 29th International Conference of The Polymer Processing Society (PPS-29). p. 129-134

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  5. Published

    Influence of particle size and particle shape on mechanical, rheological and thermal properties of polyproyplene / aluminum composites

    Holzer, C., 2013, Proceedings of the 29th International Conference of the Polymer Processing Society. p. xxx-xxx

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  6. Published

    Influence of Processing Conditions on the Morphology of Expanded Perlite/Polypropylene Composites

    Mattausch, H., Laske, S., Cirar, K., Flachberger, H. & Holzer, C., 2013, Proceedings. p. 123-128

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  7. Published

    Influence of the shear rate and the nucleating agent on the degassing pressure in foam extrusion

    Geißler, B., Macher, J., Uray, A., Laske, S., Holzer, C. & Langecker, G., 2013,

    11th International Conference on Foam Materials & Technology

    .     p. 17-21

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  8. Published

    INTERACTION BETWEEN INJECTION MOLDING PARAMETERS, FIBER ORIENTATION AND WARPAGE IN CARBON FIBER REINFORCED PPS VALVE PLATES

    Lucyshyn, T., Janko, M., Schmid, M. & Holzer, C., 2013, Proceedings of the Polymer Processing Society 29th Annual Meeting ~ PPS-29. p. 1-4

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  9. Published

    INTERACTION BETWEEN INJECTION MOLDING PARAMETERS, FIBER ORIENTATION AND WARPAGE IN CARBON FIBER REINFORCED PPS VALVE PLATES

    Lucyshyn, T., Janko, M., Schmid, M. & Holzer, C., 2013.

    Research output: Contribution to conference › Poster › Research › peer-review

  10. Published

    INTERFACE CONDITIONS OF TWO-SHOT MOLDED PARTS

    Kisslinger, T., Bruckmoser, K., Lucyshyn, T., Langecker, G. & Holzer, C., 2013.

    Research output: Contribution to conference › Poster › Research › peer-review

  11. Published

    Investigation of the influence of processing conditions on the thermal, rheological and mechanical behavior of polypropylene nanocomposites

    Mattausch, H., Laske, S., Duretek, I., Kreith, J., Maier, G. & Holzer, C., 2013, In: Polymer engineering and science. 53, p. 1001-1010

    Research output: Contribution to journal › Article › Research › peer-review

  12. Published

    Measurement of the yield stress of a stainless steel feedstock

    Duretek, I., Kukla, C., Langecker, G. & Holzer, C., 2013, Euro PM2013 Proceedings Volume 1. p. 1-6

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  13. Published

    Measuring the residence time distribution in a twin screw extruder with the use of NIR-spectroscopy

    Laske, S., Witschnigg, A., Selvasankar, R. K. & Holzer, C., 2013, In: Journal of Applied Polymer Science. 131, p. 39919-39924

    Research output: Contribution to journal › Article › Research › peer-review

  14. Published

    Performance Evaluation of Purely Mechanical Wireless In-Mould Sensor for Injection Moulding

    Müller, F., Kukla, C., Lucyshyn, T. & Holzer, C., 2013, World Academy of Science Engineering and Technology. p. 55-60

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  15. Published

    Pre-exfoliated layered silicates for next generation nanocomposites

    Laske, S., Mattausch, H., Flachberger, H., Ohrdorf, K.-H., Krischey, E., Rieß, G. & Holzer, C., 2013, The 29th International Conference of The Polymer Processing Society (PPS-29). p. xxx-xxx

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  16. Published

    Presentation of a Novel Sensor Based on Acoustic Emission in Injection Molding

    Müller, F., Rath, G., Lucyshyn, T., Kukla, C., Burgsteiner, M. & Holzer, C., 2013, In: Journal of Applied Polymer Science. 127, p. 4744-4749

    Research output: Contribution to journal › Article › Research › peer-review

  17. Published

    Resonant Acoustic Sensor System for the Wireless Monitoring of Injection Moulding

    Müller, F., O'Leary, P., Rath, G., Kukla, C., Harker, M., Lucyshyn, T. & Holzer, C., 2013, Proceedings of the 2nd International Conference on Sensor Networks. p. 153-161

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  18. Published

    Rheological behaviour of binder systems for PIM and mixing rules for calculation of viscosity

    Kukla, C., Duretek, I. & Holzer, C., 2013, EuroPM 2013 Proceedings. p. x-x

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  19. Published

    Rheological properties of wood polymer composites and their role in extrusion

    Duretek, I., Schuschnigg, S., Gooneie, A., Langecker, G. & Holzer, C., 2013, The 1st International Conference on Rheology and Modeling of Materials, Book of Abstracts. p. 36-36

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  20. Published

    Strategies to improve the mechanical properties of high density pla foam

    Geißler, B., Anna, U., Laske, S., Holzer, C. & Langecker, G., 2013,

    Tutorials & abstracts Biofoams 2013

    .     p. 234^-237

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  21. 2012
  22. Published

    A Physical Model for a Quality Control Concept in Injection Molding

    Lucyshyn, T., Kipperer, M., Kukla, C., Langecker, G. & Holzer, C., 2012, In: Journal of Applied Polymer Science. 124, p. 4926-4934

    Research output: Contribution to journal › Article › Research › peer-review

  23. Published

    Characterization of polymer surfaces to optimize cell behavior

    Holzer, C., Katschnig, M., Laske, S., Kracalik, M., Balika, W., Schäfer, U. & Andraschek, N., 2012, In: Journal of tissue engineering and regenerative medicine. 6, p. 361-362

    Research output: Contribution to journal › Article › Research › peer-review

  24. Published

    Characterization of polymer surfaces to optimize cell behavior

    Holzer, C., Katschnig, M., Laske, S., Kracalik, M., Balika, W., Schäfer, U. & Andraschek, N., 2012.

    Research output: Contribution to conference › Poster › Research › peer-review

  25. Published

    Chlorella algae – organic filler for tailor-made properties of polyolefins

    Piontek, M., Laske, S., Rieß, G. & Holzer, C., 2012, 9th WPC, Natural Fibre and other innovative Composites Congress and Exhibition. p. A10-1-A10-9

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  26. Published

    Demolding Force Measurements of Coated Micro-Structured Surfaces in a Hot Embossing Process

    Struklec, T., Burgsteiner, M., Lucyshyn, T., Balika, W., Pöschl, C. & Holzer, C., 2012, Proceedings of the Polymer Processing Society 28th Annual Meeting ~ PPS-28. p. XXX-XXX

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  27. Published

    Determination of the Transition Temperature at Different Cooling Rates and Its Influence on Prediction of Shrinkage and Warpage in Injection Molding Simulation

    Lucyshyn, T., Knapp, G., Kipperer, M. & Holzer, C., 2012, In: Journal of Applied Polymer Science. 123, p. 1162-1168

    Research output: Contribution to journal › Article › Research › peer-review

  28. Published

    Determining the ageing of polypropylene nanocomposites using rheological measurements

    Laske, S., Witschnigg, A., Mattausch, H., Kracalik, M., Pinter, G., Feuchter, M., Maier, G. & Holzer, C., 2012, In: Applied rheology. 22, 2, p. 24590-24614

    Research output: Contribution to journal › Article › Research › peer-review

  29. Published

    Effect of the mixture composition on shear and extensional rheology of recycled PET and ABS nanocomposites

    Kracalik, M., Laske, S., Witschnigg, A. & Holzer, C., 2012, In: Macromolecular Symposia. p. 33-40

    Research output: Contribution to journal › Article › Research › peer-review

  30. Published

    Effect of type and degree of layered silicates on mechanical properties and burning behavior of recycled ABS

    Piontek, M., Witschnigg, A., Laske, S., Kracalik, M. & Holzer, C., 2012,

    Program & Abstracts of PPS Americas Conference 2012

    .     p. 235-236

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  31. Published

    Einfluss von Schichtsilkaten auf die Wärmeleitfähigkeit von polymeren Nanocomposites

    Laske, S., Witschnigg, A., Duretek, I., Mattausch, H., Tscharnutter, D. & Holzer, C., 2012, Mit Compoundieren zum Erfolg. p. 97-104

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  32. Published

    Enhancement of PLA Property Profile using Nanoscaled Organoclays

    Holzer, C., Kracalik, M., Hirschenauer, M., Washüttl, M. & Laske, S., 2012,

    Progam Book & Compilation of Abstracts of International Conference on Nanotechnology 2012 (ICONT )

    .     p. 152-152

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  33. Published

    EXINMOLD: a Design Support Software for Injection Mold Makers

    Holzer, C., Kisslinger, T., Hirner, M., Lucyshyn, T. & Langecker, G., 2012,

    Program & Abstracts of PPS 2011

    .     p. 134-134

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  34. Published

    Influence of induced shear work on the properties of polyolefine nanocomposite pipes

    Witschnigg, A., Laske, S., Kracalik, M. & Holzer, C., 2012, In: Polymer engineering and science. Volume 52, p. 1155-1160

    Research output: Contribution to journal › Article › Research › peer-review

  35. Published

    Influence of masterbatches on the bond strength of two-shot molded parts

    Kisslinger, T., Lucyshyn, T., Langecker, G. & Holzer, C., 2012, Proceedings of the Polymer Processing Society 28th Annual Meeting ~ PPS-28. p. xxx-xxx

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  36. Published

    Influence of the degree of exfoliation on the thermal conductivity of polypropylene nanocomposites

    Laske, S., Duretek, I., Witschnigg, A., Mattausch, H., Tscharnuter, D. & Holzer, C., 2012, In: Polymer engineering and science. 52, p. 1479-1753

    Research output: Contribution to journal › Article › Research › peer-review

  37. Published

    Investigation of rheological, thermal and mechanical properties of expanded perlite/polypropylene composites

    Mattausch, H., Laske, S., Duretek, I., Cirar, K., Flachberger, H. & Holzer, C., 2012, The 28th International Conference of The Polymer Processing Society (PPS-28) Proceedings. p. 235-239

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  38. Published

    Investigation of rheological, thermal and mechanical properties of expanded perlite/polypropylene composites

    Mattausch, H., Laske, S., Duretek, I., Cirar, K., Flachberger, H. & Holzer, C., 2012.

    Research output: Contribution to conference › Poster › Research › peer-review

  39. Published

    Keynote: The influence of nanostructures on cellular processes during differentiation of neuronal stem cells

    Schäfer, U., Haubenwallner, S., Katschnig, M., Holzer, C., Laske, S., Balika, W., Andraschek, N., Fasching, U. & Patz, S., 2012, Journal of Tissue Engineering and Regenerative Medicine. p. 83-83

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  40. Published

    Kunststoffverarbeitung

    Holzer, C., 2012, Programm. p. 49-81

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  41. Published

    Nah-Infrarot Spektroskopie - Möglichkeiten der Qualitätskontrolle

    Witschnigg, A., Laske, S. & Holzer, C., 2012, Mit Compoundieren zum Erfolg. p. 69-76

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  42. Published

    Neuer Ansatz für stoffliches Recycling von Altreifengummi

    Witschnigg, A., Laske, S. & Holzer, C., 2012, DepoTech 2012 Tagungsband. p. 353-358

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  43. Published

    Properties of chlorella-algea reinforced polyolefin compounds

    Laske, S., Piontek, M., Rieß, G. & Holzer, C., 2012,

    Program & Abstracts of PPS Americas Conference 2012

    .     p. 216-217

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  44. Published

    Replication of Microstructured Freeform Surface Parts in Injection Molding

    Burgsteiner, M., Müller, F., Wolfberger, A., Lucyshyn, T., Kukla, C. & Holzer, C., 2012, Proceedings of the Polymer Processing Society 28th Annual Meeting ~ PPS-28. p. XXX-XXX

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  45. Published

    Rheology of wood plastics composites using by-pass-extrusion-rheometer on the twin screw extruder

    Duretek, I., Selvasankar, R. K., Langecker, G. & Holzer, C., 2012, 9th WPC, Natural Fibre and other innovative Composites Congress and Exhibition. p. A5-1-A5-8

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  46. Published

    Runner balancing in multi-cavity injection molds by time controlled valve gates

    Lucyshyn, T., Müller, F., Doppelmayer, N., Rath, G., Kukla, C. & Holzer, C., 2012, Proceedings of the Polymer Processing Society 28th Annual Meeting ~ PPS-28. p. xxx-xxx

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  47. Published

    Runner balancing in multi-cavity injection molds by time controlled valve gates

    Lucyshyn, T., Müller, F., Doppelmayer, N., Rath, G., Kukla, C. & Holzer, C., 2012.

    Research output: Contribution to conference › Poster › Research › peer-review

  48. Published

    The effect of particle size and coating of CaCO3 on the foaming behavior of a styrene butadiene block copolymer

    Geißler, B., Laske, S., Holzer, C. & Langecker, G., 2012, The 28th International Conference of The Polymer Processing Society (PPS-28). p. 184-188

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  49. Published

    The Influence of nanostructures on adhesion and survival of adult neural stem cells

    Holzer, C., Andraschek, N., Balika, W., Katschnig, M., Laske, S., Patz, S., Trattnig, C., Fasching, U. & Schäfer, U., 2012, Congress Documentation of BioNanoMed 2012 3rd International Congress. p. D3-D3

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  50. Published

    The Influence of nanostructures on adhesion and survival of adult neutral stem cells

    Holzer, C., 2012.

    Research output: Contribution to conference › Poster › Research › peer-review

  51. Published

    Tribological studies of PA66 nanocomposites filled with layered silicate clays

    Laske, S., Selvasankar, R. K., Kracalik, M., Holzer, C. & Winzer, M., 2012, The 28th International Conference of The Polymer Processing Society (PPS-28). p. xxx-xxx

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  52. Published

    Wireless In-Mold Sensor for Injection Molding: A new Approach

    Müller, F., Kukla, C., Lucyshyn, T. & Holzer, C., 2012, Proceedings of the Polymer Processing Society 28th Annual Meeting ~ PPS-28. p. XXX-XXX

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

Previous 12 3 4 5 6 7 8 Next
View graph of relations

Contact

Phone: 3500

Latest Research Output

View more (376)