Clemens Holzer

201 - 250 out of 376Page size: 50

Research output

  1. 2015
  2. Published

    Rheological properties of wood polymer composites and their role in extrusion

    Duretek, I., Schuschnigg, S., Gooneie, A., Langecker, G. & Holzer, C., 2015, In: Journal of physics / Conference series. 602, 1, 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  3. Published

    Rheology of Polymer-layered Silicate Nanocomposites in Steady-Shear Flows: A Dissipative Particle Dynamics Study

    Gooneie, A., Schuschnigg, S. & Holzer, C., 2015, The 2nd International Conference on Rheology and Modeling of Materials, Book of abstracts. p. 51

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  4. Published

    Simulation Aided Twin Screw Optimization for Polymer Nanoclay Composites

    Schuschnigg, S., Battisti, M., Joachim, W.-E., Friesenbichler, W. & Holzer, C., 2015, Danube Vltava Sava Polymer Meeting-DVSPM 2015 : Proceedings of a Conference on Polymer Science. Linz, p. 88 O13

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  5. 2014
  6. Published

    Recycling of Borehole Solids in Polymers

    Hofstätter, H. (Inventor) & Holzer, C. (Inventor), 20 Nov 2014, IPC No. C08K 5/ 00 A I, Patent No. US2014343219, Priority date 14 Sept 2012, Priority No. WO2012EP68165

    Research output: Patent

  7. Published

    RECYCLINGSVERFAHREN VON BOHRLOCHFESTKÖRPERN IN POLYMEREN

    Holzer, C. (Inventor) & Hofstätter, H. (Inventor), 23 Jul 2014, IPC No. C08K 11/ 00 A I, Patent No. EP2756028, Priority date 14 Sept 2012, Priority No. WO2012EP68165

    Research output: Patent

  8. Published

    УТИЛИЗАЦИЯ ЧАСТИЦ БУРОВОГО ШЛАМА В ПОЛИМЕРАХ

    Хофштеттер, Х. (Inventor) & Holzer, C. (Inventor), 30 Jun 2014, IPC No. C08K 3/ 34 A I, Patent No. EA201490564, Priority date 14 Sept 2012, Priority No. WO2012EP68165

    Research output: Patent

  9. Published

    Influence of processing conditions on the morphology of expanded perlite/polypropylene composites

    Mattausch, H., Laske, S., Cirar, K., Flachberger, H. & Holzer, C., 15 May 2014, AIP Conference Proceedings: PROCEEDINGS OF PPS-29: The 29th International Conference of the Polymer Processing Society - Conference Papers. Nuremberg, Germany, Vol. 1593. p. 482-487

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  10. Published

    Interface conditions of two-shot molded parts

    Kisslinger, T., Bruckmoser, K., Lucyshyn, T., Langecker, G., Resch, K. & Holzer, C., 15 May 2014, Proceedings of PPS-29: The 29th International Conference of the Polymer Processing Society - Conference Papers. p. 170-174 (AIP conference proceedings; vol. 1593).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  11. Published

    Calculation Tool for the Estimation of Injection Mold Deformation Based on FEM-Simulations

    Lucyshyn, T., Kisslinger, T., Langecker, G. & Holzer, C., 2014, Proceedings of PPS2014. p. 1-3

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  12. Published

    Effects of the polymeric niche on neural stem cell characteristics during primary culturing

    Katschnig, M., Haubenwallner, S., Fasching, U., Patz, S., Trattnig, C., Andraschek, N., Grünbacher, G., Absenger, M., Laske, S., Holzer, C., Balika, W., Bauer, G. & Schäfer, U., 2014, In: Journal of materials science / Materials in medicine.

    Research output: Contribution to journal › Article › Research › peer-review

  13. Published

    Evaluation of the Demoldability of Coated Micro Structures in the Injection Molding Process

    Struklec, T., Burgsteiner, M., Lucyshyn, T., Balika, W., Moderegger, S. & Holzer, C., 2014, Proceedings of PPS 30.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  14. Published

    Experimental Confirmation of Diffusion Process in Multi-Component Injection Molding

    Kisslinger, T., Bruckmoser, K., Lucyshyn, T., Langecker, G., Holzer, C. & Resch, K., 2014, Proceedings of PPS 30. p. 1-1

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  15. Published

    Increase of the Thermal Stability of Polymers based on Renewable Resources

    Laske, S., Ziegler, W. & Holzer, C., 2014, Proceedings of the 30th Annual Meeting of the Polymer Processing Society. p. 1-7

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  16. Published

    Influence of cellulose fiber on the foaming behavior of a polypropylene copolymer

    Geissler, B., Laske, S., Uray, A., Holzer, C. & Langecker, G., 2014, Influence of cellulose fiber on the foaming behavior of a polypropylene copolymer. p. 1-7

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  17. Published

    Influence of different blowing and nucleating agents on the degassing pressure and the foam morphology of physically foamed polypropylene

    Geissler, B., Walluch, M., Laske, S., Holzer, C. & Langecker, G., 2014,

    Blowing Agents & Foaming Processes 2014

    .     p. 1-2

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  18. Published

    INFLUENCE OF MINERAL FILLERS ON THE FLAME RETARDANCY OF EXPANDABLE GRAPHITE / POLYPROPYLENE MATERIALS

    Mattausch, H., Laske, S., Hohenwarter, D. & Holzer, C., 2014.

    Research output: Contribution to conference › Poster › Research › peer-review

  19. Published

    INFLUENCE OF MINERAL FILLERS ON THE FLAME RETARDANCY OF EXPANDABLE GRAPHITE / POLYPROPYLENE MATERIALS

    Mattausch, H., Laske, S., Hohenwarter, D. & Holzer, C., 2014, Proceedings of Antec 2014. p. 115-120

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  20. Published

    Influence of the Flow Channel Geometry on the Degassing Pressure in foam Extrusion

    Geissler, B., Schuschnigg, S., Laske, S., Macher, J., Holzer, C. & Langecker, G., 2014, Proceedings of the Technical Conference Exhibition. p. 2496-2499

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  21. Published

    Influence of the process parameters on the replication of microstructured freeform surfaces

    Burgsteiner, M., Müller, F., Lucyshyn, T., Kukla, C. & Holzer, C., 2014, AIP Conference Proceedings: PROCEEDINGS OF PPS-29: The 29th International Conference of the Polymer Processing Society - Conference Papers. Nuremberg, Germany, Vol. 1593. p. 183-188

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  22. Published

    Investigation of the Influence of Different Coatings on the Filling Behavior and Replication Quality of Microstructures in Injection Molding

    Burgsteiner, M., Müller, F., Lucyshyn, T., Kukla, C., Holzer, C., Gruber, D. P., Macher, J. & Pacher, G., 2014, Proceedings of PPS 30. p. 1-1

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  23. Published

    Modelling of Rheological Behaviour of 316L Feedstocks with Different Powder Loadings and Binder Compositions

    Kukla, C., Duretek, I. & Holzer, C., 2014, Proceedings of the EuroPM2014 Conference. p. 1-6

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  24. Published

    NIR – spectroscopy: a sophisticated tool for process and quality control

    Witschnigg, A., Laske, S. & Holzer, C., 2014, NIR – spectroscopy: a sophisticated tool for process and quality control. p. 1-7

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  25. Published

    Numerical Simulation of Temperature Changes in Rubber Compounds Flowing Through Conical Dies: an Engineering Approach

    Gooneie, A., Perko, L., Schuschnigg, S. & Holzer, C., 2014, Proceedings of 11th International Seminar on Polymer Science and Technology (ISPST2014). p. 1-2

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  26. Published

    Numerical Simulations of the Flow of Wood Polypropylene Composites with Wall Slipping in a Profile Die: The Significance of Material Data

    Gooneie, A., Schuschnigg, S., Duretek, I. & Holzer, C., 2014, Proceedings of 30th International Conference of the Polymer Processing Society (PPS-30). p. 401-405

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  27. Published

    Strategies to improve the mechanical properties of high-density polylactic acid foams

    Geissler, B., Feuchter, M., Laske, S., Fasching, M., Holzer, C. & Langecker, G., 2014, In: Journal of Cellular Plastics [Elektronische Ressource]. p. 1-21

    Research output: Contribution to journal › Article › Research › peer-review

  28. Published

    Tailor-made high density pla foam sheets – strategies to improve the mechanical properties

    Geissler, B., Feuchter, M., Laske, S., Walluch, M., Holzer, C. & Langecker, G., 2014,

    Blowing Agents & Foaming Processes 2014

    .     p. 1-2

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  29. Published

    Tailor-made high density PLA foam sheets – strategies to improve the mechanical properties

    Geißler, B., Feuchter, M., Laske, S., Walluch, M., Holzer, C. & Langecker, G., 2014, In: Cellular polymers. 33, p. 233-242

    Research output: Contribution to journal › Article › Research › peer-review

  30. Published

    Tailor-Made High Density PLA Foam Sheets - Strategies to Improve the Mechanical Properties

    Geissler, B., Feuchter, M., Laske, S., Walluch, M., Holzer, C. & Langecker, G. R., 2014, In: Cellular polymers. 33, 5, p. 249-257

    Research output: Contribution to journal › Article › Research › peer-review

  31. Published

    The Effect of Mineral Fillers on the Rheological, Mechanical and Thermal Properties of Halogen-Free Flame-Retardant Polypropylene/Expandable Graphite Compounds

    Mattausch, H., Laske, S., Hohenwarter, D. & Holzer, C., 2014, Proceedings of PPS 30.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  32. Published

    The effect of pre -shear history on the rheological behavior of Wood Plastic Composites

    Duretek, I. & Holzer, C., 2014, Proceedings of the 30th Annual Meeting of the Polymer Processing Society. p. 300-300

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  33. Published

    The influence of a hydrolysis-inhibiting additive on the degradation and biodegradation of PLA and its nanocomposites

    Stloukal, P., Kalendova, A., Mattausch, H., Laske, S., Holzer, C. & Koutny, M., 2014, In: Polymer Testing.

    Research output: Contribution to journal › Article › Research › peer-review

  34. Published

    Tribological Investigations of Polyamide Nanocomposites

    Witschnigg, A., Laske, S., Duretek, I., Holzer, C., Chitu, L. & Bodner, S., 2014, Proceedings of the 30th Annual Meeting of the Polymer Processing Society. p. 756-756

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  35. Published

    Verwendung von Bohrloch-Cuttings als Füllstoff in Kunststoffen

    Holzer, C., Witschnigg, A., Laske, S., Kowalcyzk, D., Hofstätter, H. & Schulze, K., 2014, Tagungsband zur 12. DepoTech-Konferenz 2014. p. 431-434

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  36. Published

    Voraussetzungen für die hocheffiziente Kunststoffverarbeitung mittels Spritzgusses

    Lucyshyn, T., Janko, M., Struklec, T. & Holzer, C., 2014, 23. Leobener Kunststoff-Kolloquium: Hocheffiziente Verbundwerkstoffe. p. 87-98

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  37. Published

    Wireless in-mold melt front detection for injection molding: A long-term evaluation

    Müller, F., Kukla, C., Lucyshyn, T., Harker, M., Rath, G. & Holzer, C., 2014, In: Journal of Applied Polymer Science. 131, p. 5628-5638

    Research output: Contribution to journal › Article › Research › peer-review

  38. Published

    Wireless Melt Front Detection for Injection Moulding

    Müller, F., Kukla, C., Lucyshyn, T., Burgsteiner, M. & Holzer, C., 2014, ICIT & MPT 2014 Conference Proceedings . p. 153-159

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  39. 2013
  40. Published

    RECYCLING OF BOREHOLE SOLIDS IN POLYMERS

    Holzer, C. (Inventor) & Hofstätter, H. (Inventor), 21 Mar 2013, IPC No. C08K 3/ 34 A I, Patent No. CA2848810, Priority date 14 Sept 2012, Priority No. WO2012EP68165

    Research output: Patent

  41. Published

    RECYCLING OF BOREHOLE SOLIDS IN POLYMERS

    Holzer, C. (Inventor) & Hofstätter, H. (Inventor), 21 Mar 2013, IPC No. C08K 3/ 34 A I, Patent No. WO2013037978, Priority date 16 Sept 2011, Priority No. EP20110181725

    Research output: Patent

  42. Published

    ACTIVATION PRESSURE INVESTIGATION FOR A PURELY MECHANICAL WIRELESS IN-MOLD SENSOR

    Müller, F., Kukla, C., Lucyshyn, T. & Holzer, C., 2013, Proceedings of the Polymer Processing Society 29th Annual Meeting ~ PPS-29. p. XXX-XXX

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  43. Published

    ACTIVATION PRESSURE INVESTIGATION FOR A PURELY MECHANICAL WIRELESS IN-MOLD SENSOR

    Müller, F., Kukla, C., Lucyshyn, T. & Holzer, C., 2013.

    Research output: Contribution to conference › Poster › Research › peer-review

  44. Published

    Application and Development of Simulation Software in Polymer Processing

    Lucyshyn, T., Müller, F., Schuschnigg, S., Holzer, C., Perko, L., Fasching, M. & Friesenbichler, W., 2013, In: Berg- und hüttenmännische Monatshefte : BHM. 158, p. 200-205

    Research output: Contribution to journal › Article › Research › peer-review

  45. Published

    Capabilities of a Demolding Force Measurement Tool for Injection Molding

    Struklec, T., Holzer, C., Lucyshyn, T., Balika, W. & Moderegger, S., 2013, Proceedings of the Asia-Australasia Conference of PPS 2013. p. 051-051

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  46. Published

    Design of a Demolding Force Measurement Tool for Injection Molding

    Struklec, T., Burgsteiner, M., Lucyshyn, T., Balika, W., Moderegger, S. & Holzer, C., 2013, Proceedings of the Polymer Processing Society 29th Annual Meeting ~ PPS-29. p. xxx-xxx

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  47. Published

    DESIGN OF A DEMOLDING FORCE MEASUREMENT TOOL FOR INJECTION MOLDING

    Struklec, T., Burgsteiner, M., Lucyshyn, T., Balika, W., Moderegger, S. & Holzer, C., 2013.

    Research output: Contribution to conference › Poster › Research › peer-review

  48. Published

    Dielectric ResidenceTime Measurements on Single Screw Extruders

    Schuschnigg, S., Reinberger, W., Holzer, C. & Fertschej, A., 2013, PPS-29 Polymer Processing Scociety. p. 31-31

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  49. Published

    Entformungskraftmessung an mikrostrukturierten Bauteilen

    Struklec, T., Burgsteiner, M., Lucyshyn, T., Balika, W., Pöschl, C. & Holzer, C., 2013, 22. Leobener Kunststoff-Kolloquium: Oberlfächen und Grenzflächen in der Polymertechnologie. p. 90-100

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  50. Published

    Fundemental Investigations of Reinforcement of Expanded Perlite in Polypropylene

    Mattausch, H., Laske, S., Cirar, K., Flachberger, H. & Holzer, C., 2013, New Developments in Polymer Composite Research. New York

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  51. Published

    Grenzflächenphänomene im Mehrkomponenten-Spritzguss

    Kisslinger, T., Bruckmoser, K., Lucyshyn, T., Langecker, G. & Holzer, C., 2013, 22. Leobener Kunststoff-Kolloquium. p. 58-74

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  52. Published

    Hör auf dein Werkzeug

    Müller, F., Kukla, C., Lucyshyn, T. & Holzer, C., 2013, In: Kunststoffe. p. 31-33

    Research output: Contribution to journal › Article › Research › peer-review

  53. Published

    IMPACT OF INJECTION MOLDING PARAMETERS ON THE FIBERLENGTH DISTRIBUTION AND THE MECHANICAL PROPERTIES OF A SHORT CARBON FIBER REINFORCED POLYPHENYLENE SULFIDE

    Janko, M., Lucyshyn, T., Schlögl, S., Raimann, P., Lenko, D., Meisel, T. & Holzer, C., 2013.

    Research output: Contribution to conference › Poster › Research › peer-review

Previous 1 2 3 4 5 6 7 8 Next
View graph of relations

Contact

Phone: 3500

Latest Research Output

View more (376)