Clemens Holzer

201 - 300 out of 376Page size: 100

Research output

  1. 2015
  2. Published

    Rheological properties of wood polymer composites and their role in extrusion

    Duretek, I., Schuschnigg, S., Gooneie, A., Langecker, G. & Holzer, C., 2015, In: Journal of physics / Conference series. 602, 1, 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  3. Published

    Rheology of Polymer-layered Silicate Nanocomposites in Steady-Shear Flows: A Dissipative Particle Dynamics Study

    Gooneie, A., Schuschnigg, S. & Holzer, C., 2015, The 2nd International Conference on Rheology and Modeling of Materials, Book of abstracts. p. 51

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  4. Published

    Simulation Aided Twin Screw Optimization for Polymer Nanoclay Composites

    Schuschnigg, S., Battisti, M., Joachim, W.-E., Friesenbichler, W. & Holzer, C., 2015, Danube Vltava Sava Polymer Meeting-DVSPM 2015 : Proceedings of a Conference on Polymer Science. Linz, p. 88 O13

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  5. 2014
  6. Published

    Recycling of Borehole Solids in Polymers

    Hofstätter, H. (Inventor) & Holzer, C. (Inventor), 20 Nov 2014, IPC No. C08K 5/ 00 A I, Patent No. US2014343219, Priority date 14 Sept 2012, Priority No. WO2012EP68165

    Research output: Patent

  7. Published

    RECYCLINGSVERFAHREN VON BOHRLOCHFESTKÖRPERN IN POLYMEREN

    Holzer, C. (Inventor) & Hofstätter, H. (Inventor), 23 Jul 2014, IPC No. C08K 11/ 00 A I, Patent No. EP2756028, Priority date 14 Sept 2012, Priority No. WO2012EP68165

    Research output: Patent

  8. Published

    УТИЛИЗАЦИЯ ЧАСТИЦ БУРОВОГО ШЛАМА В ПОЛИМЕРАХ

    Хофштеттер, Х. (Inventor) & Holzer, C. (Inventor), 30 Jun 2014, IPC No. C08K 3/ 34 A I, Patent No. EA201490564, Priority date 14 Sept 2012, Priority No. WO2012EP68165

    Research output: Patent

  9. Published

    Influence of processing conditions on the morphology of expanded perlite/polypropylene composites

    Mattausch, H., Laske, S., Cirar, K., Flachberger, H. & Holzer, C., 15 May 2014, AIP Conference Proceedings: PROCEEDINGS OF PPS-29: The 29th International Conference of the Polymer Processing Society - Conference Papers. Nuremberg, Germany, Vol. 1593. p. 482-487

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  10. Published

    Interface conditions of two-shot molded parts

    Kisslinger, T., Bruckmoser, K., Lucyshyn, T., Langecker, G., Resch, K. & Holzer, C., 15 May 2014, Proceedings of PPS-29: The 29th International Conference of the Polymer Processing Society - Conference Papers. p. 170-174 (AIP conference proceedings; vol. 1593).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  11. Published

    Calculation Tool for the Estimation of Injection Mold Deformation Based on FEM-Simulations

    Lucyshyn, T., Kisslinger, T., Langecker, G. & Holzer, C., 2014, Proceedings of PPS2014. p. 1-3

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  12. Published

    Effects of the polymeric niche on neural stem cell characteristics during primary culturing

    Katschnig, M., Haubenwallner, S., Fasching, U., Patz, S., Trattnig, C., Andraschek, N., Grünbacher, G., Absenger, M., Laske, S., Holzer, C., Balika, W., Bauer, G. & Schäfer, U., 2014, In: Journal of materials science / Materials in medicine.

    Research output: Contribution to journal › Article › Research › peer-review

  13. Published

    Evaluation of the Demoldability of Coated Micro Structures in the Injection Molding Process

    Struklec, T., Burgsteiner, M., Lucyshyn, T., Balika, W., Moderegger, S. & Holzer, C., 2014, Proceedings of PPS 30.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  14. Published

    Experimental Confirmation of Diffusion Process in Multi-Component Injection Molding

    Kisslinger, T., Bruckmoser, K., Lucyshyn, T., Langecker, G., Holzer, C. & Resch, K., 2014, Proceedings of PPS 30. p. 1-1

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  15. Published

    Increase of the Thermal Stability of Polymers based on Renewable Resources

    Laske, S., Ziegler, W. & Holzer, C., 2014, Proceedings of the 30th Annual Meeting of the Polymer Processing Society. p. 1-7

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  16. Published

    Influence of cellulose fiber on the foaming behavior of a polypropylene copolymer

    Geissler, B., Laske, S., Uray, A., Holzer, C. & Langecker, G., 2014, Influence of cellulose fiber on the foaming behavior of a polypropylene copolymer. p. 1-7

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  17. Published

    Influence of different blowing and nucleating agents on the degassing pressure and the foam morphology of physically foamed polypropylene

    Geissler, B., Walluch, M., Laske, S., Holzer, C. & Langecker, G., 2014,

    Blowing Agents & Foaming Processes 2014

    .     p. 1-2

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  18. Published

    INFLUENCE OF MINERAL FILLERS ON THE FLAME RETARDANCY OF EXPANDABLE GRAPHITE / POLYPROPYLENE MATERIALS

    Mattausch, H., Laske, S., Hohenwarter, D. & Holzer, C., 2014.

    Research output: Contribution to conference › Poster › Research › peer-review

  19. Published

    INFLUENCE OF MINERAL FILLERS ON THE FLAME RETARDANCY OF EXPANDABLE GRAPHITE / POLYPROPYLENE MATERIALS

    Mattausch, H., Laske, S., Hohenwarter, D. & Holzer, C., 2014, Proceedings of Antec 2014. p. 115-120

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  20. Published

    Influence of the Flow Channel Geometry on the Degassing Pressure in foam Extrusion

    Geissler, B., Schuschnigg, S., Laske, S., Macher, J., Holzer, C. & Langecker, G., 2014, Proceedings of the Technical Conference Exhibition. p. 2496-2499

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  21. Published

    Influence of the process parameters on the replication of microstructured freeform surfaces

    Burgsteiner, M., Müller, F., Lucyshyn, T., Kukla, C. & Holzer, C., 2014, AIP Conference Proceedings: PROCEEDINGS OF PPS-29: The 29th International Conference of the Polymer Processing Society - Conference Papers. Nuremberg, Germany, Vol. 1593. p. 183-188

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  22. Published

    Investigation of the Influence of Different Coatings on the Filling Behavior and Replication Quality of Microstructures in Injection Molding

    Burgsteiner, M., Müller, F., Lucyshyn, T., Kukla, C., Holzer, C., Gruber, D. P., Macher, J. & Pacher, G., 2014, Proceedings of PPS 30. p. 1-1

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  23. Published

    Modelling of Rheological Behaviour of 316L Feedstocks with Different Powder Loadings and Binder Compositions

    Kukla, C., Duretek, I. & Holzer, C., 2014, Proceedings of the EuroPM2014 Conference. p. 1-6

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  24. Published

    NIR – spectroscopy: a sophisticated tool for process and quality control

    Witschnigg, A., Laske, S. & Holzer, C., 2014, NIR – spectroscopy: a sophisticated tool for process and quality control. p. 1-7

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  25. Published

    Numerical Simulation of Temperature Changes in Rubber Compounds Flowing Through Conical Dies: an Engineering Approach

    Gooneie, A., Perko, L., Schuschnigg, S. & Holzer, C., 2014, Proceedings of 11th International Seminar on Polymer Science and Technology (ISPST2014). p. 1-2

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  26. Published

    Numerical Simulations of the Flow of Wood Polypropylene Composites with Wall Slipping in a Profile Die: The Significance of Material Data

    Gooneie, A., Schuschnigg, S., Duretek, I. & Holzer, C., 2014, Proceedings of 30th International Conference of the Polymer Processing Society (PPS-30). p. 401-405

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  27. Published

    Strategies to improve the mechanical properties of high-density polylactic acid foams

    Geissler, B., Feuchter, M., Laske, S., Fasching, M., Holzer, C. & Langecker, G., 2014, In: Journal of Cellular Plastics [Elektronische Ressource]. p. 1-21

    Research output: Contribution to journal › Article › Research › peer-review

  28. Published

    Tailor-made high density pla foam sheets – strategies to improve the mechanical properties

    Geissler, B., Feuchter, M., Laske, S., Walluch, M., Holzer, C. & Langecker, G., 2014,

    Blowing Agents & Foaming Processes 2014

    .     p. 1-2

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  29. Published

    Tailor-made high density PLA foam sheets – strategies to improve the mechanical properties

    Geißler, B., Feuchter, M., Laske, S., Walluch, M., Holzer, C. & Langecker, G., 2014, In: Cellular polymers. 33, p. 233-242

    Research output: Contribution to journal › Article › Research › peer-review

  30. Published

    Tailor-Made High Density PLA Foam Sheets - Strategies to Improve the Mechanical Properties

    Geissler, B., Feuchter, M., Laske, S., Walluch, M., Holzer, C. & Langecker, G. R., 2014, In: Cellular polymers. 33, 5, p. 249-257

    Research output: Contribution to journal › Article › Research › peer-review

  31. Published

    The Effect of Mineral Fillers on the Rheological, Mechanical and Thermal Properties of Halogen-Free Flame-Retardant Polypropylene/Expandable Graphite Compounds

    Mattausch, H., Laske, S., Hohenwarter, D. & Holzer, C., 2014, Proceedings of PPS 30.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  32. Published

    The effect of pre -shear history on the rheological behavior of Wood Plastic Composites

    Duretek, I. & Holzer, C., 2014, Proceedings of the 30th Annual Meeting of the Polymer Processing Society. p. 300-300

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  33. Published

    The influence of a hydrolysis-inhibiting additive on the degradation and biodegradation of PLA and its nanocomposites

    Stloukal, P., Kalendova, A., Mattausch, H., Laske, S., Holzer, C. & Koutny, M., 2014, In: Polymer Testing.

    Research output: Contribution to journal › Article › Research › peer-review

  34. Published

    Tribological Investigations of Polyamide Nanocomposites

    Witschnigg, A., Laske, S., Duretek, I., Holzer, C., Chitu, L. & Bodner, S., 2014, Proceedings of the 30th Annual Meeting of the Polymer Processing Society. p. 756-756

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  35. Published

    Verwendung von Bohrloch-Cuttings als Füllstoff in Kunststoffen

    Holzer, C., Witschnigg, A., Laske, S., Kowalcyzk, D., Hofstätter, H. & Schulze, K., 2014, Tagungsband zur 12. DepoTech-Konferenz 2014. p. 431-434

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  36. Published

    Voraussetzungen für die hocheffiziente Kunststoffverarbeitung mittels Spritzgusses

    Lucyshyn, T., Janko, M., Struklec, T. & Holzer, C., 2014, 23. Leobener Kunststoff-Kolloquium: Hocheffiziente Verbundwerkstoffe. p. 87-98

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  37. Published

    Wireless in-mold melt front detection for injection molding: A long-term evaluation

    Müller, F., Kukla, C., Lucyshyn, T., Harker, M., Rath, G. & Holzer, C., 2014, In: Journal of Applied Polymer Science. 131, p. 5628-5638

    Research output: Contribution to journal › Article › Research › peer-review

  38. Published

    Wireless Melt Front Detection for Injection Moulding

    Müller, F., Kukla, C., Lucyshyn, T., Burgsteiner, M. & Holzer, C., 2014, ICIT & MPT 2014 Conference Proceedings . p. 153-159

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  39. 2013
  40. Published

    RECYCLING OF BOREHOLE SOLIDS IN POLYMERS

    Holzer, C. (Inventor) & Hofstätter, H. (Inventor), 21 Mar 2013, IPC No. C08K 3/ 34 A I, Patent No. CA2848810, Priority date 14 Sept 2012, Priority No. WO2012EP68165

    Research output: Patent

  41. Published

    RECYCLING OF BOREHOLE SOLIDS IN POLYMERS

    Holzer, C. (Inventor) & Hofstätter, H. (Inventor), 21 Mar 2013, IPC No. C08K 3/ 34 A I, Patent No. WO2013037978, Priority date 16 Sept 2011, Priority No. EP20110181725

    Research output: Patent

  42. Published

    ACTIVATION PRESSURE INVESTIGATION FOR A PURELY MECHANICAL WIRELESS IN-MOLD SENSOR

    Müller, F., Kukla, C., Lucyshyn, T. & Holzer, C., 2013, Proceedings of the Polymer Processing Society 29th Annual Meeting ~ PPS-29. p. XXX-XXX

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  43. Published

    ACTIVATION PRESSURE INVESTIGATION FOR A PURELY MECHANICAL WIRELESS IN-MOLD SENSOR

    Müller, F., Kukla, C., Lucyshyn, T. & Holzer, C., 2013.

    Research output: Contribution to conference › Poster › Research › peer-review

  44. Published

    Application and Development of Simulation Software in Polymer Processing

    Lucyshyn, T., Müller, F., Schuschnigg, S., Holzer, C., Perko, L., Fasching, M. & Friesenbichler, W., 2013, In: Berg- und hüttenmännische Monatshefte : BHM. 158, p. 200-205

    Research output: Contribution to journal › Article › Research › peer-review

  45. Published

    Capabilities of a Demolding Force Measurement Tool for Injection Molding

    Struklec, T., Holzer, C., Lucyshyn, T., Balika, W. & Moderegger, S., 2013, Proceedings of the Asia-Australasia Conference of PPS 2013. p. 051-051

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  46. Published

    Design of a Demolding Force Measurement Tool for Injection Molding

    Struklec, T., Burgsteiner, M., Lucyshyn, T., Balika, W., Moderegger, S. & Holzer, C., 2013, Proceedings of the Polymer Processing Society 29th Annual Meeting ~ PPS-29. p. xxx-xxx

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  47. Published

    DESIGN OF A DEMOLDING FORCE MEASUREMENT TOOL FOR INJECTION MOLDING

    Struklec, T., Burgsteiner, M., Lucyshyn, T., Balika, W., Moderegger, S. & Holzer, C., 2013.

    Research output: Contribution to conference › Poster › Research › peer-review

  48. Published

    Dielectric ResidenceTime Measurements on Single Screw Extruders

    Schuschnigg, S., Reinberger, W., Holzer, C. & Fertschej, A., 2013, PPS-29 Polymer Processing Scociety. p. 31-31

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  49. Published

    Entformungskraftmessung an mikrostrukturierten Bauteilen

    Struklec, T., Burgsteiner, M., Lucyshyn, T., Balika, W., Pöschl, C. & Holzer, C., 2013, 22. Leobener Kunststoff-Kolloquium: Oberlfächen und Grenzflächen in der Polymertechnologie. p. 90-100

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  50. Published

    Fundemental Investigations of Reinforcement of Expanded Perlite in Polypropylene

    Mattausch, H., Laske, S., Cirar, K., Flachberger, H. & Holzer, C., 2013, New Developments in Polymer Composite Research. New York

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  51. Published

    Grenzflächenphänomene im Mehrkomponenten-Spritzguss

    Kisslinger, T., Bruckmoser, K., Lucyshyn, T., Langecker, G. & Holzer, C., 2013, 22. Leobener Kunststoff-Kolloquium. p. 58-74

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  52. Published

    Hör auf dein Werkzeug

    Müller, F., Kukla, C., Lucyshyn, T. & Holzer, C., 2013, In: Kunststoffe. p. 31-33

    Research output: Contribution to journal › Article › Research › peer-review

  53. Published

    IMPACT OF INJECTION MOLDING PARAMETERS ON THE FIBERLENGTH DISTRIBUTION AND THE MECHANICAL PROPERTIES OF A SHORT CARBON FIBER REINFORCED POLYPHENYLENE SULFIDE

    Janko, M., Lucyshyn, T., Schlögl, S., Raimann, P., Lenko, D., Meisel, T. & Holzer, C., 2013.

    Research output: Contribution to conference › Poster › Research › peer-review

  54. Published

    Influence of Chain Extender on the Foaming Behavior and on the Mechanical Properteis of Physically Foamed PLA

    Mostafa, H., Geißler, B., Uray, A., Laske, S., Holzer, C. & Langecker, G., 2013.

    Research output: Contribution to conference › Poster › Research › peer-review

  55. Published

    Influence of chain extender on the foaming behaviour and the mechanical properties of physically foamed PLA

    Geißler, B., Mostafa, H., Uray, A., Laske, S., Holzer, C. & Langecker, G., 2013, The 29th International Conference of The Polymer Processing Society (PPS-29). p. 120-125

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  56. Published

    Influence of different fillers on the processing behaviour and mechanical properties of physically foamed polyethylene

    Geißler, B., Laske, S., Holzer, C. & Langecker, G., 2013, The 29th International Conference of The Polymer Processing Society (PPS-29). p. 129-134

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  57. Published

    Influence of particle size and particle shape on mechanical, rheological and thermal properties of polyproyplene / aluminum composites

    Holzer, C., 2013, Proceedings of the 29th International Conference of the Polymer Processing Society. p. xxx-xxx

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  58. Published

    Influence of Processing Conditions on the Morphology of Expanded Perlite/Polypropylene Composites

    Mattausch, H., Laske, S., Cirar, K., Flachberger, H. & Holzer, C., 2013, Proceedings. p. 123-128

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  59. Published

    Influence of the shear rate and the nucleating agent on the degassing pressure in foam extrusion

    Geißler, B., Macher, J., Uray, A., Laske, S., Holzer, C. & Langecker, G., 2013,

    11th International Conference on Foam Materials & Technology

    .     p. 17-21

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  60. Published

    INTERACTION BETWEEN INJECTION MOLDING PARAMETERS, FIBER ORIENTATION AND WARPAGE IN CARBON FIBER REINFORCED PPS VALVE PLATES

    Lucyshyn, T., Janko, M., Schmid, M. & Holzer, C., 2013, Proceedings of the Polymer Processing Society 29th Annual Meeting ~ PPS-29. p. 1-4

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  61. Published

    INTERACTION BETWEEN INJECTION MOLDING PARAMETERS, FIBER ORIENTATION AND WARPAGE IN CARBON FIBER REINFORCED PPS VALVE PLATES

    Lucyshyn, T., Janko, M., Schmid, M. & Holzer, C., 2013.

    Research output: Contribution to conference › Poster › Research › peer-review

  62. Published

    INTERFACE CONDITIONS OF TWO-SHOT MOLDED PARTS

    Kisslinger, T., Bruckmoser, K., Lucyshyn, T., Langecker, G. & Holzer, C., 2013.

    Research output: Contribution to conference › Poster › Research › peer-review

  63. Published

    Investigation of the influence of processing conditions on the thermal, rheological and mechanical behavior of polypropylene nanocomposites

    Mattausch, H., Laske, S., Duretek, I., Kreith, J., Maier, G. & Holzer, C., 2013, In: Polymer engineering and science. 53, p. 1001-1010

    Research output: Contribution to journal › Article › Research › peer-review

  64. Published

    Measurement of the yield stress of a stainless steel feedstock

    Duretek, I., Kukla, C., Langecker, G. & Holzer, C., 2013, Euro PM2013 Proceedings Volume 1. p. 1-6

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  65. Published

    Measuring the residence time distribution in a twin screw extruder with the use of NIR-spectroscopy

    Laske, S., Witschnigg, A., Selvasankar, R. K. & Holzer, C., 2013, In: Journal of Applied Polymer Science. 131, p. 39919-39924

    Research output: Contribution to journal › Article › Research › peer-review

  66. Published

    Performance Evaluation of Purely Mechanical Wireless In-Mould Sensor for Injection Moulding

    Müller, F., Kukla, C., Lucyshyn, T. & Holzer, C., 2013, World Academy of Science Engineering and Technology. p. 55-60

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  67. Published

    Pre-exfoliated layered silicates for next generation nanocomposites

    Laske, S., Mattausch, H., Flachberger, H., Ohrdorf, K.-H., Krischey, E., Rieß, G. & Holzer, C., 2013, The 29th International Conference of The Polymer Processing Society (PPS-29). p. xxx-xxx

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  68. Published

    Presentation of a Novel Sensor Based on Acoustic Emission in Injection Molding

    Müller, F., Rath, G., Lucyshyn, T., Kukla, C., Burgsteiner, M. & Holzer, C., 2013, In: Journal of Applied Polymer Science. 127, p. 4744-4749

    Research output: Contribution to journal › Article › Research › peer-review

  69. Published

    Resonant Acoustic Sensor System for the Wireless Monitoring of Injection Moulding

    Müller, F., O'Leary, P., Rath, G., Kukla, C., Harker, M., Lucyshyn, T. & Holzer, C., 2013, Proceedings of the 2nd International Conference on Sensor Networks. p. 153-161

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  70. Published

    Rheological behaviour of binder systems for PIM and mixing rules for calculation of viscosity

    Kukla, C., Duretek, I. & Holzer, C., 2013, EuroPM 2013 Proceedings. p. x-x

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  71. Published

    Rheological properties of wood polymer composites and their role in extrusion

    Duretek, I., Schuschnigg, S., Gooneie, A., Langecker, G. & Holzer, C., 2013, The 1st International Conference on Rheology and Modeling of Materials, Book of Abstracts. p. 36-36

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  72. Published

    Strategies to improve the mechanical properties of high density pla foam

    Geißler, B., Anna, U., Laske, S., Holzer, C. & Langecker, G., 2013,

    Tutorials & abstracts Biofoams 2013

    .     p. 234^-237

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  73. 2012
  74. Published

    A Physical Model for a Quality Control Concept in Injection Molding

    Lucyshyn, T., Kipperer, M., Kukla, C., Langecker, G. & Holzer, C., 2012, In: Journal of Applied Polymer Science. 124, p. 4926-4934

    Research output: Contribution to journal › Article › Research › peer-review

  75. Published

    Characterization of polymer surfaces to optimize cell behavior

    Holzer, C., Katschnig, M., Laske, S., Kracalik, M., Balika, W., Schäfer, U. & Andraschek, N., 2012, In: Journal of tissue engineering and regenerative medicine. 6, p. 361-362

    Research output: Contribution to journal › Article › Research › peer-review

  76. Published

    Characterization of polymer surfaces to optimize cell behavior

    Holzer, C., Katschnig, M., Laske, S., Kracalik, M., Balika, W., Schäfer, U. & Andraschek, N., 2012.

    Research output: Contribution to conference › Poster › Research › peer-review

  77. Published

    Chlorella algae – organic filler for tailor-made properties of polyolefins

    Piontek, M., Laske, S., Rieß, G. & Holzer, C., 2012, 9th WPC, Natural Fibre and other innovative Composites Congress and Exhibition. p. A10-1-A10-9

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  78. Published

    Demolding Force Measurements of Coated Micro-Structured Surfaces in a Hot Embossing Process

    Struklec, T., Burgsteiner, M., Lucyshyn, T., Balika, W., Pöschl, C. & Holzer, C., 2012, Proceedings of the Polymer Processing Society 28th Annual Meeting ~ PPS-28. p. XXX-XXX

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  79. Published

    Determination of the Transition Temperature at Different Cooling Rates and Its Influence on Prediction of Shrinkage and Warpage in Injection Molding Simulation

    Lucyshyn, T., Knapp, G., Kipperer, M. & Holzer, C., 2012, In: Journal of Applied Polymer Science. 123, p. 1162-1168

    Research output: Contribution to journal › Article › Research › peer-review

  80. Published

    Determining the ageing of polypropylene nanocomposites using rheological measurements

    Laske, S., Witschnigg, A., Mattausch, H., Kracalik, M., Pinter, G., Feuchter, M., Maier, G. & Holzer, C., 2012, In: Applied rheology. 22, 2, p. 24590-24614

    Research output: Contribution to journal › Article › Research › peer-review

  81. Published

    Effect of the mixture composition on shear and extensional rheology of recycled PET and ABS nanocomposites

    Kracalik, M., Laske, S., Witschnigg, A. & Holzer, C., 2012, In: Macromolecular Symposia. p. 33-40

    Research output: Contribution to journal › Article › Research › peer-review

  82. Published

    Effect of type and degree of layered silicates on mechanical properties and burning behavior of recycled ABS

    Piontek, M., Witschnigg, A., Laske, S., Kracalik, M. & Holzer, C., 2012,

    Program & Abstracts of PPS Americas Conference 2012

    .     p. 235-236

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  83. Published

    Einfluss von Schichtsilkaten auf die Wärmeleitfähigkeit von polymeren Nanocomposites

    Laske, S., Witschnigg, A., Duretek, I., Mattausch, H., Tscharnutter, D. & Holzer, C., 2012, Mit Compoundieren zum Erfolg. p. 97-104

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  84. Published

    Enhancement of PLA Property Profile using Nanoscaled Organoclays

    Holzer, C., Kracalik, M., Hirschenauer, M., Washüttl, M. & Laske, S., 2012,

    Progam Book & Compilation of Abstracts of International Conference on Nanotechnology 2012 (ICONT )

    .     p. 152-152

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  85. Published

    EXINMOLD: a Design Support Software for Injection Mold Makers

    Holzer, C., Kisslinger, T., Hirner, M., Lucyshyn, T. & Langecker, G., 2012,

    Program & Abstracts of PPS 2011

    .     p. 134-134

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  86. Published

    Influence of induced shear work on the properties of polyolefine nanocomposite pipes

    Witschnigg, A., Laske, S., Kracalik, M. & Holzer, C., 2012, In: Polymer engineering and science. Volume 52, p. 1155-1160

    Research output: Contribution to journal › Article › Research › peer-review

  87. Published

    Influence of masterbatches on the bond strength of two-shot molded parts

    Kisslinger, T., Lucyshyn, T., Langecker, G. & Holzer, C., 2012, Proceedings of the Polymer Processing Society 28th Annual Meeting ~ PPS-28. p. xxx-xxx

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  88. Published

    Influence of the degree of exfoliation on the thermal conductivity of polypropylene nanocomposites

    Laske, S., Duretek, I., Witschnigg, A., Mattausch, H., Tscharnuter, D. & Holzer, C., 2012, In: Polymer engineering and science. 52, p. 1479-1753

    Research output: Contribution to journal › Article › Research › peer-review

  89. Published

    Investigation of rheological, thermal and mechanical properties of expanded perlite/polypropylene composites

    Mattausch, H., Laske, S., Duretek, I., Cirar, K., Flachberger, H. & Holzer, C., 2012, The 28th International Conference of The Polymer Processing Society (PPS-28) Proceedings. p. 235-239

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  90. Published

    Investigation of rheological, thermal and mechanical properties of expanded perlite/polypropylene composites

    Mattausch, H., Laske, S., Duretek, I., Cirar, K., Flachberger, H. & Holzer, C., 2012.

    Research output: Contribution to conference › Poster › Research › peer-review

  91. Published

    Keynote: The influence of nanostructures on cellular processes during differentiation of neuronal stem cells

    Schäfer, U., Haubenwallner, S., Katschnig, M., Holzer, C., Laske, S., Balika, W., Andraschek, N., Fasching, U. & Patz, S., 2012, Journal of Tissue Engineering and Regenerative Medicine. p. 83-83

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  92. Published

    Kunststoffverarbeitung

    Holzer, C., 2012, Programm. p. 49-81

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  93. Published

    Nah-Infrarot Spektroskopie - Möglichkeiten der Qualitätskontrolle

    Witschnigg, A., Laske, S. & Holzer, C., 2012, Mit Compoundieren zum Erfolg. p. 69-76

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  94. Published

    Neuer Ansatz für stoffliches Recycling von Altreifengummi

    Witschnigg, A., Laske, S. & Holzer, C., 2012, DepoTech 2012 Tagungsband. p. 353-358

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  95. Published

    Properties of chlorella-algea reinforced polyolefin compounds

    Laske, S., Piontek, M., Rieß, G. & Holzer, C., 2012,

    Program & Abstracts of PPS Americas Conference 2012

    .     p. 216-217

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  96. Published

    Replication of Microstructured Freeform Surface Parts in Injection Molding

    Burgsteiner, M., Müller, F., Wolfberger, A., Lucyshyn, T., Kukla, C. & Holzer, C., 2012, Proceedings of the Polymer Processing Society 28th Annual Meeting ~ PPS-28. p. XXX-XXX

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  97. Published

    Rheology of wood plastics composites using by-pass-extrusion-rheometer on the twin screw extruder

    Duretek, I., Selvasankar, R. K., Langecker, G. & Holzer, C., 2012, 9th WPC, Natural Fibre and other innovative Composites Congress and Exhibition. p. A5-1-A5-8

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  98. Published

    Runner balancing in multi-cavity injection molds by time controlled valve gates

    Lucyshyn, T., Müller, F., Doppelmayer, N., Rath, G., Kukla, C. & Holzer, C., 2012, Proceedings of the Polymer Processing Society 28th Annual Meeting ~ PPS-28. p. xxx-xxx

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  99. Published

    Runner balancing in multi-cavity injection molds by time controlled valve gates

    Lucyshyn, T., Müller, F., Doppelmayer, N., Rath, G., Kukla, C. & Holzer, C., 2012.

    Research output: Contribution to conference › Poster › Research › peer-review

  100. Published

    The effect of particle size and coating of CaCO3 on the foaming behavior of a styrene butadiene block copolymer

    Geißler, B., Laske, S., Holzer, C. & Langecker, G., 2012, The 28th International Conference of The Polymer Processing Society (PPS-28). p. 184-188

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  101. Published

    The Influence of nanostructures on adhesion and survival of adult neural stem cells

    Holzer, C., Andraschek, N., Balika, W., Katschnig, M., Laske, S., Patz, S., Trattnig, C., Fasching, U. & Schäfer, U., 2012, Congress Documentation of BioNanoMed 2012 3rd International Congress. p. D3-D3

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  102. Published

    The Influence of nanostructures on adhesion and survival of adult neutral stem cells

    Holzer, C., 2012.

    Research output: Contribution to conference › Poster › Research › peer-review

  103. Published

    Tribological studies of PA66 nanocomposites filled with layered silicate clays

    Laske, S., Selvasankar, R. K., Kracalik, M., Holzer, C. & Winzer, M., 2012, The 28th International Conference of The Polymer Processing Society (PPS-28). p. xxx-xxx

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  104. Published

    Wireless In-Mold Sensor for Injection Molding: A new Approach

    Müller, F., Kukla, C., Lucyshyn, T. & Holzer, C., 2012, Proceedings of the Polymer Processing Society 28th Annual Meeting ~ PPS-28. p. XXX-XXX

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

Previous 1 2 3 4 Next
View graph of relations

Contact

Phone: 3500

Latest Research Output

View more (376)