Christof Sommitsch

(Former)

21 - 40 out of 126Page size: 20

Research output

  1. 2009
  2. Published

    Modelling the Forming Limit during Cross-Rolling of Seamless Pipes using a Modified Continuum Damage Mechanics Approach

    Pschera, R., Klarner, J.K.-H. & Sommitsch, C., 2009, 3rd International Conference Simuation and Modelling of Metallurgical Processes in Steelmaking. p. 201-209

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  3. Published

    Recrystallization and grain growth in the nickel-based superalloy Allvac 718Plus / Dedicated to Professor Dr. Franz Jeglitsch on the occasion of his 75th birthday

    Sommitsch, C., Huber, D., Ingelman-Sundberg, F., Mitsche, S., Stockinger, M. & Buchmayr, B., 2009, In: International journal of materials research : IJMR ; Zeitschrift für Metallkunde. 100, p. 1088-1098

    Research output: Contribution to journal › Article › Research › peer-review

  4. 2008
  5. Published

    Characterization of δ-phase in superalloy Allvac 718Plus™

    Stotter, C., Sommitsch, C., Wagner, J., Leitner, H., Letofsky-Papst, I., Zickler, G. A., Prantl, W. & Stockinger, M., Apr 2008, In: Zeitschrift fuer Metallkunde/Materials Research and Advanced Techniques. 99, 4, p. 376-380 5 p.

    Research output: Contribution to journal › Article › Research › peer-review

  6. Published

    Ausscheidungskinetik während der Homogenisierung und Gefügeentwicklung während der Warmumformung der Aluminiumlegierung AA6082

    Sherstnev, P., Sommitsch, C., Mitsche, S., Hacksteiner, M. & Ebner, T., 2008, XXVII. Verformungskundliches Kolloquium. p. 123-130

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  7. Published

    Characterisation of the subgrain structure of the aluminium alloy AA6082 after homogenization and hot forming by EBSD

    Mitsche, S., Sherstnev, P., Sommitsch, C., Ebner, T. & Hacksteiner, M., 2008, Characterisation of the subgrain structure of the aluminium alloy AA6082 after homogenization and hot forming by EBSD. p. 579-580

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  8. Published

    Characterization of delta-phase in superalloy Allvac 718Plus TM

    Stotter, C., Sommitsch, C., Wagner, J., Leitner, H., Letofsky-Papst, I., Zickler, G., Prantl, W. & Stockinger, M., 2008, In: International journal of materials research : IJMR ; Zeitschrift für Metallkunde. 99, p. 376-380

    Research output: Contribution to journal › Article › Research › peer-review

  9. Published

    Comparison of experimental and Finite Element Modelling of the extrusion of AA6082 on both tools and extrudate as a function of process parameters

    Krumphals, F., Flitta, I., Mitsche, S., Wlanis, T., Jahn, A. & Sommitsch, C., 2008, ESAFORM 2008. p. 1-4

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  10. Published

    Creep and Fatigue Damage in Hot Work Tools Steels during Copper and Aluminium Extrusion

    Sommitsch, C., Wlanis, T., Hatzenbichler, T. & Riedl, C., 2008, Key engineering materials. p. 169-176 (Key engineering materials).

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  11. Published

    Creep fatigue in hot work tool steels during copper extrusion

    Krumphals, F., Wlanis, T., Sommitsch, C., Buchner, B., Huber, D., Redl, C. & Wieser, V., 2008, Sixth International Conference on Low Cycle Fatigue. p. 721-726

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  12. Published

    FEM Modelling of Cross Rolling using Damage Mechanics

    Pschera, R., Klarner, J.K.-H. & Sommitsch, C., 2008, 12th international Conference of Metal Forming, Steel research international, Special Edition, Vol. 1, M. Pietrzyk et al. Eds.. p. 349-356

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  13. Published

    Gekoppelte Umform- und Gefügesimulation beim Radial- und Gesenkschmieden

    Harrer, O.-K., Sommitsch, C. & Buchmayr, B., 2008, MEFORM 2008, Simulation von Umformprozessen. Inst. für Metallformung, p. 18-27

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  14. Published

    Investigations of retained deformation energy after hot forming and its influence on the abnormal grain growth of the nickel based alloy 80A

    Candic, M., Tian, B., Kleber, S., Mitsche, S. & Sommitsch, C., 2008, TMS 2008. p. 1-6

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  15. Published

    Lifetime comparison of different hot work tool steels for extrusion tools in aluminium extrusion

    Sommitsch, C., Krumphals, F., Stotter, C., Dendl, D., Wlanis, T., Huber, D. & Redl, C., 2008, Lifetime comparison of different hot work tool steels for extrusion tools in aluminium extrusion. p. 1-12

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  16. Published

    Lifetime evaluation of two different hot work tool steels in aluminium extrusion

    Sommitsch, C., Sievert, R., Wlanis, T. & Redl, C., 2008, In: Computational materials science. 43, p. 82-91

    Research output: Contribution to journal › Article › Research › peer-review

  17. Published

    Microstructure modeling of the dynamic recrystallization kinetics during turbine disc forging of the nickel based superalloy Allvac 718PlusTM

    Huber, D., Stotter, C., Sommitsch, C., Mitsche, S., Poelt, P., Buchmayr, B. & Stockinger, M., 2008, Superalloys 2008, Roger C. Reed et al. Eds., TMS. p. 855-861

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  18. Published

    Microstructure modeling of the dynamic recrystallization kinetics during turbine disc forging of the nickel based superalloy Allvac 718PlusTM

    Huber, D., Stotter, C., Sommitsch, C., Mitsche, S., Poelt, P. & Buchmayr, B., 2008.

    Research output: Contribution to conference › Poster › Research › peer-review

  19. Published

    Mikrostrukturentwicklung und duktile Schädigung beim Gesenkschmieden

    Sommitsch, C., Harrer, O.-K., Rüf, G. & Buchmayr, B., 2008, Der Pawelski - Umformtechnik im Spannungsfeld zwischen Plastomechanik und Werkstofftechnik. p. 113-123

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  20. Published

    Modellierung der Rekristallisationskinetik während der Warmumformung der Aluminiumlegierung 5083

    Sherstnev, P., Mitsche, S., Sommitsch, C., Melzer, C., Hacksteiner, M. & Ebner, T., 2008, In: Berg- und hüttenmännische Monatshefte : BHM. 153, p. 439-442

    Research output: Contribution to journal › Article › Research › peer-review

  21. Published

    Modellierung und Simulation des Lochbildungsprozesses während des Schrägwalzens unter Nutzung eines Schädigungsmodells in Forge2007

    Pschera, R., Klarner, J.K.-H. & Sommitsch, C., 2008, MEFORM 2008. p. 1-9

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  22. Published

    Modelling of Structure Evolution during Hot Working of AA5083

    Sherstnev, P., Mitsche, S., Sommitsch, C., Melzer, C., Hacksteiner, M. & Ebner, T., 2008, Aluminium Alloys, Their Physical and Mechanical Properties, J. Hirsch et al. (Eds.). p. 1077-1084

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

Previous 1 2 3 4 5 6 7 Next
View graph of relations

Latest Research Output

View more (126)