Christian Oberwinkler

(Former)

1 - 33 out of 33Page size: 50

Research output

  1. 2012
  2. Published

    Herstellung von Panzerschichten mit Hartstoffpartikeln auf MSG-Basis

    Barwart, S., Leitner, M. & Oberwinkler, C., 2012, In: Tribologie und Schmierungstechnik. p. 19-23

    Research output: Contribution to journal › Article › Research › peer-review

  3. Published

    Influence of hard facing layers on structural fatigue behaviour

    Barwart, S., Leitner, M. & Oberwinkler, C., 2012, Proceedings of the 3rd Fatigue Symposium. p. 1-7

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  4. Published

    In-situ observation of initiation and propagation of (short) microstructural crack growth using a rotating bending machine

    Huter, P., Wohlfahrt, M. & Oberwinkler, C., 2012, Proceedings of the 4th International Conference on CRACK PATHS (CP 2012). p. 12-19

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  5. 2011
  6. Published

    Einflüsse auf die Schwingfestigkeit von Gusseisen und deren Einbindung in die Berechnung der Bauteillebensdauer

    Wohlfahrt, M., Oberwinkler, C., Tunzini, S., Rauscher, A., de la Prida Caballero, R. & Eichlseder, W., 2011, In: Giesserei-Praxis. p. 192-199

    Research output: Contribution to journal › Article › Research › peer-review

  7. Published

    Herstellung und Charakterisierung von Verschleißschutzschichten mit Hartstoffpartikeln auf MSG-Basis

    Barwart, S., Leitner, M., Chladil, K. & Oberwinkler, C., 2011, Tagungsband. p. 1-8

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  8. Published

    Leichtbau, Betriebsfestigkeit und Verschleiß - Optimierung unter Berücksichtigung dreier konträrer Ziele am Beispiel hochbelasteter Schneidzähne

    Redik, S., Mösenbacher, A., Guster, C., Oberwinkler, C., Leitner, H. & Feyerer, C., 2011, Konsequenter Leichtbau und Festigkeitssteigerung - (k)ein Widerspruch?. p. 253-264

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  9. Published

    Leichtbau, Betriebsfestigkeit und Verschleiß – Optimierung unter Berücksichtigung dreier konträrer Ziele am Beispiel hochbelasteter Schneidzähne

    Redik, S., Mösenbacher, A., Guster, C., Oberwinkler, C., Feyerer, C. & Leitner, H., 2011.

    Research output: Contribution to conference › Poster › Research › peer-review

  10. 2010
  11. Published

    Durchgängige Simulation des Herstellprozesses eines A356-Gussteils

    Unterreiter, G., Wlanis, T., Oberwinkler, C., Redik, S., Pabel, T. & Kneißl, C., 2010.

    Research output: Contribution to conference › Poster › Research › peer-review

  12. Published

    Influences of pores and segregations in cast and forgend components on the fatigue life

    Eichlseder, W., Oberwinkler, C. & Fröschl, J., 2010, 29emes Journees de Printemps "Influence des procedes sur la tenue en fatigue - Role des defauts - JP 2010. p. 71-78

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  13. Published

    .:“Schädigungstolerante Auslegung von Aluminium-Druckgusskomponenten“

    Oberwinkler, C., Leitner, H. & Eichlseder, W., 2010, In: MP materials testing : Materialprüfung . 52, p. 513-519

    Research output: Contribution to journal › Article › Research › peer-review

  14. Published

    The role of sampling position on fatigue of austempered ductile iron

    Wohlfahrt, M., Oberwinkler, C., Tunzini, S., Rauscher, A., de la Prida Caballero, R. & Eichlseder, W., 2010, In: Procedia Engineering. 2, p. 1337-1341

    Research output: Contribution to journal › Article › Research › peer-review

  15. 2009
  16. Published

    Analysis of Short Crack Growth for Two Representative Light Metals

    Oberwinkler, C., Oberwinkler, B. & Redik, S., 2009.

    Research output: Contribution to conference › Poster › Research › peer-review

  17. Published

    Berücksichtigung der Porenverteilung bei der betriebsfesten Auslegung von Aluminium-Druckgussbauteilen

    Oberwinkler, C. & Eichlseder, W., 2009, In: Gießerei-Rundschau. p. 168-173

    Research output: Contribution to journal › Article › Research › peer-review

  18. Published

    Betriebsfeste Auslegung von Aluminiumdruckgussteilen unter Berücksichtigung der Porenverteilung im Bauteil

    Oberwinkler, C., Eichlseder, W., Schönfeld, F., Schmidt, S. & Leitner, H., 2009, In: Druckguss-Praxis. p. 97-103

    Research output: Contribution to journal › Article › Research › peer-review

  19. Published

    Betriebsfeste Auslegung von Aluminiumdruckgussteilen unter der Berücksichtigung der Porenverteilung im Bauteil

    Oberwinkler, C., Eichlseder, W., Schönfeld, F., Schmidt, S. & Leitner, H., 2009, Gießtechnik im Motorenbau - Anforderungen der Automobilindustrie. p. 173-189

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  20. Published

    Damage Tolerant Design of Mg-HPDC Components

    Oberwinkler, C., Eichlseder, W. & Seebacher, M., 2009, Magnesium. p. 126-132

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  21. Published

    Estimation of the local porosity of aluminium high-pressure die casting components from casting simulation results using self-organizing maps

    Oberwinkler, C., Eichlseder, W. & Leitner, H., 2009, In: International foundry research = Giessereiforschung. p. 22-33

    Research output: Contribution to journal › Article › Research › peer-review

  22. Published

    Improvement of an existing model to estimate the pore distribution for a fatigue proof design of Al hpdc components

    Oberwinkler, C., Leitner, H. & Eichlseder, W., 2009, Shape Casting: 3rd International Symposium. p. 115-128

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  23. Published

    Schädigungstolerante Auslegung von Aluminiumdruckgussteilen unter Berücksichtigung der lokalen Defekte

    Oberwinkler, C., Schönfeld, F., Schmidt, S., Leitner, H. & Eichlseder, W., 2009, 36. Tagung des DVM-Srbeitskreises Betriebsfestigkeit. p. 93-102

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  24. Published

    The Definition of the Influence of Pore Size on the Fatigue Limit Using Short Crack Growth Experiments

    Oberwinkler, C., Eichlseder, W. & Leitner, H., 2009, In: Journal of ASTM international. p. 54-68

    Research output: Contribution to journal › Article › Research › peer-review

  25. Published

    Virtuelle betriebsfeste Auslegung von Aluminium-Druckgussbauteilen

    Oberwinkler, C., 2009, 202 p.

    Research output: Thesis › Doctoral Thesis

  26. 2008
  27. Published

    Das Kitagwa-Haigh Diagramm für die Berechnung der Lebensdauer von Aluminiumdruckgussteilen

    Oberwinkler, C., Leitner, H. & Eichlseder, W., 2008, Das Kitagwa-Haigh Diagramm für die Berechnung der Lebensdauer von Aluminiumdruckgussteilen. p. 257-262

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  28. 2007
  29. Published

    Grundlagenforschung von tribologischen System im Antriebsstrang hinsichtlich Reibung und Verschleiß

    Godor, I., Grün, F., Leitner, H. & Oberwinkler, C., 2007

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  30. 2006
  31. Published

    Automated Production Surveillance

    Oberwinkler, C., Dixon, D., Mayfield, D. & Holland, J., 2006, In: SPE journal : SPEJ. p. 1-8

    Research output: Contribution to journal › Article › Research › peer-review

  32. 2005
  33. Published

    From Real-Time Data to Production Optimization

    Oberwinkler, C. & Stundner, M., 2005, In: SPE journal : SPEJ. p. 229-239

    Research output: Contribution to journal › Article › Research › peer-review

  34. Published

    Real Time Information to the Engineers Desktop - How Murphy E&P Improved Production Management

    Oberwinkler, C., 2005, Offshore Europe. p. 1-10

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  35. 2004
  36. Published

    From Real Time Data to Production Optimization

    Oberwinkler, C., 2004, SPE Asia Pacific Conference on Integrated Modelling for Asset Management. p. 1-10

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  37. Published

    New Tools for Fracture Design Optimization

    Oberwinkler, C., 2004, SPE International Symposium and Exhibition on Formation Damage Control. p. 1-10

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  38. Published

    Predictive Data Mining Techniques for Production Optimization

    Oberwinkler, C., 2004, SPE Annual Technical Conference and Exhibition. p. 1-10

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  39. Published

    Self-Organizing Maps for Lithofacies Identification and Permeability Prediction

    Oberwinkler, C., 2004, SPE Annual Technical Conference and Exhibition. p. 1-10

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  40. Published

    Utilizing the Values of Continuously Measured Data

    Oberwinkler, C., 2004, SPE Annual Technical Conference and Exhibition. p. 1-10

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  41. 2003
  42. Published

    Technologies Identify Best Well Designs for Refracturing

    Oberwinkler, C. & Economides, M. J., 2003, In: American oil and gas reporter. 46, p. 73-81

    Research output: Contribution to journal › Article › Research › peer-review

  43. Published

    The Definitive Identification of Candidate Wells for Refracturing

    Oberwinkler, C., 2003, SPE Annual Technical Conference and Exhibition. p. 1-10

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

View graph of relations

Latest Research Output

View more (33)