Anja Gosch

(Former)

1 - 28 out of 28Page size: 100

Research output

  1. 2022
  2. Published

    Fatigue behaviour of thermoplastic bulk materials under mixed mode loading conditions

    Gosch, A., Arbeiter, F., Berer, M., Vojtek, T., Hutař, P. & Pinter, G. G., 14 Apr 2022, 18th International Conference on Deformation, Yield and Fracture of Polymers.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  3. 2021
  4. Published

    Effect of the specimen size on the applicability of the load separation criterion in J-testing of polymers

    Gosch, A., Arbeiter, F., Berer, M., Agnelli, S., Baldi, F. & Pinter, G. G., 28 Sept 2021, Book of abstracts - 1st Virtual ESIS TC4 Conference on Fracture of Polymers, Composites and Adhesives.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  5. Published

    Crack Propagation Analysis of Compression Loaded Rolling Elements

    Dlhý, P., Poduska, J., Berer, M., Gosch, A., Slavik, O., Nahlik, L. & Hutař, P., 19 May 2021, In: Materials. 14.2021, 10, 24 p., 2656.

    Research output: Contribution to journal › Article › Research › peer-review

  6. Published

    Size-Induced Constraint Effects on Crack Initiation and Propagation Parameters in Ductile Polymers

    Gosch, A., Arbeiter, F. J., Agnelli, S., Berer, M. & Baldi, F., 13 Apr 2021, In: Materials. 14.2021, 8, 23 p., 1945.

    Research output: Contribution to journal › Article › Research › peer-review

  7. Published

    Polymer fracture mechanics extended to large plastic deformation and mixed mode loading

    Gosch, A., 2021

    Research output: Thesis › Doctoral Thesis

  8. 2020
  9. Published

    Fatigue characterization of polyethylene under mixed mode I/III conditions

    Gosch, A., Arbeiter, F., Berer, M., Vojtek, T., Hutař, P. & Pinter, G. G., 15 Dec 2020, In: International Journal of Fatigue. 145.2021, April, 13 p., 106084.

    Research output: Contribution to journal › Article › Research › peer-review

  10. E-pub ahead of print

    Methods for automated crack length detection in fracture mechanical fatigue tests of unreinforced polymers

    Gosch, A., Geier, J., Arbeiter, F., Berer, M. & Pinter, G. G., 1 Dec 2020, (E-pub ahead of print) In: Procedia structural integrity / ESIS, European Structural Integrity Society. 28.2020, p. 1184-1192 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  11. Published

    Fracture of Thin-Walled Polyoxymethylene Bulk Specimens in Modes I and III

    Schrader, P., Gosch, A., Berer, M. & Marzi, S., 2 Nov 2020, In: Materials. 13, 22, p. 1-18 18 p., 5096.

    Research output: Contribution to journal › Article › Research › peer-review

  12. Published

    J-testing of polymers via the load separation criterion based ESIS TC4 procedure: Effect of the specimen size

    Gosch, A., Arbeiter, F. J., Agnelli, S., Berer, M., Pinter, G. & Baldi, F., Sept 2020, In: Polymer Testing. 89, September, 10 p., 106637.

    Research output: Contribution to journal › Article › Research › peer-review

  13. Published

    Applicability of the load separation criterion in J-testing of polymers: Effect of the specimen size

    Gosch, A., Arbeiter, F., Agnelli, S., Berer, M., Pinter, G. G. & Baldi, F., 29 Jun 2020.

    Research output: Contribution to conference › Abstract

  14. Published

    Methods for automated crack length detection in fracture mechanical fatigue tests of unreinforced polymers

    Gosch, A., Geier, J., Arbeiter, F., Berer, M. & Pinter, G., 2020, In: Procedia Structural Integrity. 28, p. 1184-1192 9 p.

    Research output: Contribution to journal › Conference article › peer-review

  15. Published

    Stress intensity factors in novel specimens for crack propagation under loading conditions II+III in polymers

    Slavik, O., Hutař, P., Berer, M., Gosch, A., Vojtek, T., Arbeiter, F. & Náhlík, L., 2020, AIP Conference Proceedings.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  16. 2019
  17. Published

    Fatigue Crack Propagation under Mixed Mode I and III in Polyoxymethelene Homopolymer

    Slavik, O., Hutař, P., Gosch, A., Berer, M., Vojtek, T., Arbeiter, F., Pinter, G. G. & Nahlik, L., 13 Dec 2019, Key Engineering Materials. 827 ed. Vol. 2019. p. 404-409 6 p. (Key Engineering Materials).

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  18. Published

    Fracture mechanics description of the defect in rolling cylinder

    Dlhy, P., Poduška, J., Berer, M., Gosch, A., Pinter, G. G. & Hutař, P., 4 Nov 2019.

    Research output: Contribution to conference › Paper › peer-review

  19. E-pub ahead of print

    Mixed Mode I/III fatigue fracture characterization of Polyoxymethylene

    Gosch, A., Berer, M., Hutař, P., Slavik, O., Vojtek, T., Arbeiter, F. & Pinter, G. G., 13 Sept 2019, (E-pub ahead of print) In: International Journal of Fatigue. 130.2020, January, p. 105269 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  20. 2018
  21. Published

    Compression-Loaded Cracked Cylinder - Stress Intensity Factor Evaluation

    Dlhy, P., Poduska, J., Náhlík, L., Berer, M., Gosch, A., Pinter, G. G. & Hutar, P., 2 Aug 2018, Key Engineering Materials. Vol. 774. p. 331 336 p.

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  22. Published

    Numerical Modelling of Cylindrical Specimen under Mixed-Mode Loading Conditions

    Slavik, O., Hutar, P., Berer, M., Gosch, A., Arbeiter, F., Pinter, G. G. & Nahlik, L., 2 Aug 2018, p. 325. 330 p.

    Research output: Contribution to conference › Paper › peer-review

  23. Published

    Comparison of J-integral methods for the characterization of tough polypropylene grades close to the glass transition temperature

    Gosch, A., Arbeiter, F. J., Berer, M. & Pinter, G., 22 Jun 2018, In: Engineering Fracture Mechanics. 203.2018, November, p. 2-17 16 p.

    Research output: Contribution to journal › Article › Research › peer-review

  24. Published

    Material selection, testing and validation of additively manufactured components

    Wiener, J., Arbeiter, F., Spörk, M., Gosch, A. & Pinter, G. G., 9 May 2018.

    Research output: Contribution to conference › Paper › peer-review

  25. Published

    Application of J-integral methods to tough pipe materials

    Gosch, A., Arbeiter, F., Berer, M., Wiener, J., Frank, A. & Pinter, G. G., 7 May 2018.

    Research output: Contribution to conference › Paper › peer-review

  26. Published

    Fracture mechanic principles for multi-layer pipe-wall design

    Arbeiter, F., Gosch, A., Wiener, J., Frank, A. & Pinter, G. G., 7 May 2018, p. 1. 4 p.

    Research output: Contribution to conference › Paper › peer-review

  27. Published

    Study of mixed mode crack propagation in pipe type specimen

    Slavik, O., Hutar, P., Berer, M., Gosch, A., Arbeiter, F. & Náhlík, L., 11 Apr 2018, p. 133. 138 p.

    Research output: Contribution to conference › Paper

  28. Published

    Influence of strand orientation on mechanical properties in near homogeneous FFF produced PLA parts

    Wiener, J., Arbeiter, F., Spörk, M., Gosch, A. & Pinter, G. G., 27 Mar 2018.

    Research output: Contribution to conference › Poster › Research

  29. Published

    Toughening of polymeric materials by utilizing spatial material property variations: Towards bio-inspired multi-layered materials

    Arbeiter, F., Wiener, J., Gosch, A., Pinter, G. G. & Kolednik, O., 25 Mar 2018, p. 1. 4 p.

    Research output: Contribution to conference › Paper

  30. Published

    Fracture mechanical characterization and lifetime estimation of near-homogeneous components produced by fused filament fabrication

    Arbeiter, F., Spoerk, M., Wiener, J., Gosch, A. & Pinter, G., 5 Jan 2018, In: Polymer Testing. 66.2018, April, p. 105-113 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  31. Published

    Mode III fatigue in technical thermoplastics

    Gosch, A., Berer, M., Dlhy, P., Hutar, P., Arbeiter, F. & Pinter, G. G., 2018.

    Research output: Contribution to conference › Poster › Research

  32. 2017
  33. Published

    Experimental methods to characterize the nonlinear elastic plastic fracture behaviour of polymers, as a starting point for the description of multi-layered structures

    Gosch, A., Arbeiter, F. & Pinter, G. G., 10 Sept 2017.

    Research output: Contribution to conference › Abstract

  34. Published

    Examination of J-Integral methods and their applicability to tough polypropylene materials

    Gosch, A., 2017

    Research output: Thesis › Master's Thesis

View graph of relations

Latest Research Output

View more (28)