Andreas Ludwig

251 - 300 out of 528Page size: 50

Research output

  1. 2013
  2. Published

    Minutes of the spring meeting on project "Importance of Hydrodynamics in Peritectic Steel Thin Slab Casting"

    Vakhrushev, A., Ludwig, A. & Wu, M., 2013

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  3. Published

    Minutes of the spring meeting on project "Numerical and experimental study of Horizontal Centrifugal Casting"

    Bohacek, J., Kharicha, A. & Ludwig, A., 2013

    Research output: Book/Report › Commissioned report › Transfer

  4. Published

    Minutes of the summer meeting on project "Electromagnetic processing of dual-phase fluids"

    Karimi Sibaki, E., Wu, M. & Ludwig, A., 2013

    Research output: Book/Report › Commissioned report › Transfer

  5. Published

    Minutes of the winter meeting on project "Importance of Hydrodynamics in PEritectic Steek Thin Slab Casting"

    Vakhrushev, A., Ludwig, A. & Wu, M., 2013

    Research output: Book/Report › Commissioned report › Transfer

  6. Published

    Modeling of the flow-solidification interaction in thin slab casting

    Vakhrushev, A., Wu, M., Ludwig, A., Tang, Y., Hackl, G. & Nitzl, G., 2013, McWASP XIII. p. 1-1

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  7. Published

    Modeling the effect of strand surface bulging and mechanical softreduction on the macrosegregation formation in steel continuous casting

    Domitner, J., Wu, M., Kharicha, A., Ludwig, A., Kaufmann, B., Reiter, J. & Schaden, T., 2013, In: Metallurgical and materials transactions. A, Physical metallurgy and materials science .

    Research output: Contribution to journal › Article › Research › peer-review

  8. Published

    Modelling diffusion-governed solidification of ternary alloys - Part 1: Coupling solidification kinetics with thermodynamics

    Wu, M., Li, J., Ludwig, A. & Kharicha, A., 2013, In: Computational materials science. 79, p. 830-840

    Research output: Contribution to journal › Article › Research › peer-review

  9. Published

    Modelling macrosegregation in a 2.45 ton steel ingot

    Li, J., Wu, M., Ludwig, A. & Kharicha, A., 2013, McWASP XIII. p. 1-1

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  10. Published

    Numerical investigation of shell formation in thin slab casting of funnel-type mould

    Vakhrushev, A., Wu, M., Ludwig, A., Tang, Y., Hackl, G. & Nitzl, G., 2013, In: Metallurgical and materials transactions. B, Process metallurgy and materials processing science.

    Research output: Contribution to journal › Article › Research › peer-review

  11. Published

    Preparation of Insitu-Observations of Isothermal Coupled Peritectic Growth on Board of the ISS

    Ludwig, A. & Mogeritsch, J., 2013, Symposium on "Materials Research in Microgravity. p. 1-1

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  12. Published

    Shallow Water Model for Horizontal Centrifugal Casting

    Bohacek, J., Kharicha, A., Ludwig, A. & Wu, M., 2013, McWASP XIII. p. 1-1

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  13. Published

    Simulation of macrosegregation in a 2.45-ton steel ingot using a three-phase mixed columnar-equiaxed model

    Li, J., Wu, M., Ludwig, A. & Kharicha, A., 2013, In: International journal of heat and mass transfer. 72.2014, May, p. 668-679 12 p.

    Research output: Contribution to journal › Article › Research › peer-review

  14. Published

    Simulation of the voltage signal during the formation and the departure of a droplet in the electro-slag Remelting process

    Kharicha, A., Wu, M. & Ludwig, A., 2013, In: International journal of thermal sciences.

    Research output: Contribution to journal › Article › Research › peer-review

  15. Published

    Simulation results report "Simulation of the beam blank casting" for RHI "Importance of Hydrodynamics in Peritectic Steel Thin Slab Casting"

    Vakhrushev, A., Ludwig, A. & Wu, M., 2013

    Research output: Book/Report › Commissioned report › Transfer

  16. Published

    Simultaneous observation of melt flow and motion of equiaxed crystals during solidification using a dual phase PIV technique

    Kharicha, A., Stefan Kharicha, M., Ludwig, A. & Wu, M., 2013, McWASP XIII. p. 1-1

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  17. Published

    “MHD and multiphase phenomena in an industrial scale electro-slag remelting process”

    Kharicha, A., Wu, M. & Ludwig, A., 2013, “MHD and multiphase phenomena in an industrial scale electro-slag remelting process”.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  18. Published

    “Simultaneous observation of melt flow and motion of equiaxed crystals during solidification using a dual phase Particle Image Velocimetry technique. Part I

    Kharicha, A., Stefan Kharicha, M., Ludwig, A. & Wu, M., 2013, In: Metallurgical and materials transactions. A, Physical metallurgy and materials science . 44, p. 650-660

    Research output: Contribution to journal › Article › Research › peer-review

  19. Published

    “Simultaneous observation of melt flow and motion of equiaxed crystals during solidification using a dual phase Particle Image Velocimetry technique. Part II

    Kharicha, A., Stefan Kharicha, M., Ludwig, A. & Wu, M., 2013, In: Metallurgical and materials transactions. A, Physical metallurgy and materials science . 44, p. 661-668

    Research output: Contribution to journal › Article › Research › peer-review

  20. 2012
  21. Published

    Thermodynamic description of the system Cu-Sn-P experimental and numerical investigation

    Grasser, M., Ludwig, A. & Schillinger, W., 3 Dec 2012, In: International journal of materials research : IJMR ; Zeitschrift für Metallkunde. 103, 11, p. 1312-1318 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  22. Published

    Preface - 13th International Conference on Modeling of Casting, Welding and Advanced Solidification Processes, MCWASP 2012; Schladming; Austria; 17 June 2012 through 22 June 2012

    Ludwig, A., 1 Dec 2012, In: IOP Conference Series: Materials Science and Engineering. 33, 1, 011002.

    Research output: Contribution to journal › Editorial › peer-review

  23. Published

    Advanced solidification studies on transparent alloy systems: A new european solidification insert for material science glovebox on board the international space station

    Ludwig, A., Mogeritsch, J., Kolbe, M., Zimmermann, G., Sturz, L., Bergeon, N., Billia, B., Faivre, G., Akamatsu, S., Bottin-Rousseau, S. & Voss, D., 1 Sept 2012, In: JOM. 64, 9, p. 1097-1101 5 p.

    Research output: Contribution to journal › Article › Research › peer-review

  24. Published

    Modeling of Multiscale and Multiphase Phenomena in Material Processing

    Ludwig, A., Kharicha, A. & Wu, M., 15 May 2012, CFD Modeling and Simulation in Materials Processing - Held During the TMS 2012 Annual Meeting and Exhibition. p. 147 - 161

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  25. Published

    Vibrations Induced Flow in a Horizontal Centrifugal Casting

    Kharicha, A., Bohacek, J., Ludwig, A. & Wu, M., 15 May 2012, CFD Modeling and Simulation in Materials Processing. John Wiley & Sons, Großbritannien, p. 227-234 8 p.

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  26. Published

    Vibrations induced flow in a horizontal centrifugal casting

    Kharicha, A., Bohacek, J., Ludwig, A. & Wu, M., 15 May 2012, CFD Modeling and Simulation in Materials Processing - Held During the TMS 2012 Annual Meeting and Exhibition. Orlando: TMS, p. 227-234 8 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  27. Published

    Adv. Solidification Studies on Transparent Alloy Systems: A New European Solidification Insert for Material Science Glovebox on Board the Int. Space Station

    Ludwig, A. & Mogeritsch, J., 2012, In: JOM. p. 1097-1101

    Research output: Contribution to journal › Article › Research › peer-review

  28. Published

    Advanced Multiphase Modeling of Solidification with OpenFOAM®

    Vakhrushev, A., Ludwig, A., Wu, M., Tang, Y., Hackl, G. & Nitzl, G., 2012, Open Source CFD International Conference 2012. p. 1-18

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  29. Published

    Experimental investigation on the ternary phase diagram Cu-Sn-P

    Ludwig, A., Grasser, M. & Schillinger, W., 2012, In: World of metallurgy - Erzmetall : internationale Fachzeitschrift für Metallurgie. 65, p. 117-125

    Research output: Contribution to journal › Article › Research › peer-review

  30. Published

    Influence of the earth magnetic field on electrically induced flows

    Kharicha, A., Wu, M., Ludwig, A. & Karimi Sibaki, E., 2012, In: Journal of iron and steel research international. 19, p. 63-66

    Research output: Contribution to journal › Article › Research › peer-review

  31. Published

    Influence of the frequency of the applied AC current on the electroslag remelting process

    Kharicha, A., Wu, M., Ludwig, A., Ramprecht, M. & Holzgruber, H., 2012, CFD Modeling and Simulation in Materials Processing: Proceedings of a symposium sponsored by Association for Iron and Steel Technology and the Process Technology and Modeling Committee of the Extraction and Processing Division and the Solidification Committee of the Materials Processing and Manufacturing Division of TMS (The Minerals, Metals & Materials Society) Held during the TMS 2012 Annual Meeting & Exhibition Orlando, Florida, USA March 11-15, 2012. p. 139-146

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  32. Published

    Investigations on the origin of radial distribution of non-metallic inclusions in ESR ingot

    Kharicha, A., Körp, J., Kubin, M., Wu, M. & Ludwig, A., 2012, CLEANSTEEL8. p. 145-157

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  33. Published

    Jahresbericht CD-Labor für Prozesssimulation von Erstarrungs-und Umschmelzvorgängen Modul I

    Vakhrushev, A., Wu, M. & Ludwig, A., 2012

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  34. Published

    Jahresbericht CD-Labor für Prozesssimulation von Erstarrungs-und Umschmelzvorgängen Modul II

    Karimi Sibaki, E., Wu, M. & Ludwig, A., 2012

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  35. Published

    Jahresbericht MCL Projekt A1.1.

    Domitner, J., Hölzl, C., Ludwig, A. & Wu, M., 2012

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  36. Published

    Jahresbericht MCL Projekt A1.2.

    Bohacek, J., Ludwig, A. & Wu, M., 2012

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  37. Published

    Jahresbericht MCL Projekt A1.4

    Unterreiter, G. & Ludwig, A., 2012

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  38. Published

    Jahresbericht Quench-IT

    Unterreiter, G. & Ludwig, A., 2012

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  39. Published

    Microstructure formation in the two phase region of the binary peritectic organic system TRIS-NPG

    Mogeritsch, J. & Ludwig, A., 2012, Materials Research in Microgravity 2012. p. 48-55

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  40. Published

    Modeling of multiphase and multiscale phenomena in materials processing

    Ludwig, A., Kharicha, A. & Wu, M., 2012, CFD Modeling and Simulation in Materials Processin. p. 149-161

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  41. Published

    Multiphase modelling of the macrosegregation in ingot castings

    Wu, M., Li, J., Kharicha, A. & Ludwig, A., 2012, ICRF-2012. p. 1-10

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  42. Published

    Numerical study of the influence of mold filling conditions on the as-cast structure of Al-4 wt.% Cu ingots

    Ahmadein, M., Kharicha, A. & Ludwig, A., 2012, International Conf. on Engineering and Technology. p. 1-6

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  43. Published

    Simulation of channel segregation using a two-phase columnar solidification model, Part I: Model description and verification

    Li, J., Wu, M., Hao, J. & Ludwig, A., 2012, In: Computational materials science. 55, p. 407-418

    Research output: Contribution to journal › Article › Research › peer-review

  44. Published

    Simulation of channel segregation using a two-phase columnar solidification model, Part II: Mechanism and parameter study

    Li, J., Wu, M., Hao, J., Kharicha, A. & Ludwig, A., 2012, In: Computational materials science. 55, p. 419-429

    Research output: Contribution to journal › Article › Research › peer-review

  45. Published

    Simulation of the as-cast structure of Al-4.0wt.%Cu ingots with a 5-phase mixed columnar-equiaxed solidification model

    Wu, M., Ahmadein, M., Kharicha, A. & Ludwig, A., 2012, McWASP XIII. p. 1-8

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  46. Published

    Thermo-mechanical modeling of dendrite deformation in continuous casting of steel

    Domitner, J., Drezet, J-M., Wu, M. & Ludwig, A., 2012.

    Research output: Contribution to conference › Poster › Research › peer-review

  47. Published

    Thermo-mechanical modeling of dendrite deformation in continuous casting of steel

    Domitner, J., Drezet, J-M., Wu, M. & Ludwig, A., 2012, IOP Conf. Series: Materials Science and Engineering. p. 012058-1-012058-8

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  48. Published

    Thermodynamic description of the system Cu-Sn-P: experimental and numerical invigation

    Grasser, M., Ludwig, A. & Schillinger, W., 2012, In: International journal of materials research : IJMR ; Zeitschrift für Metallkunde. 103, p. E1-7

    Research output: Contribution to journal › Article › Research › peer-review

  49. Published

    Using a two-phase columnar solidification model to study the principle of mechanical softreduction in slab casting

    Wu, M., Domitner, J. & Ludwig, A., 2012, In: Metallurgical and materials transactions. A, Physical metallurgy and materials science . 43, p. 945-964

    Research output: Contribution to journal › Article › Research › peer-review

  50. Published

    Vibration induced flow in a horizontal centrifugal casting

    Kharicha, A., Bohacek, J., Ludwig, A. & Wu, M., 2012, CFD Modeling and Simulation in Materials Processing. p. 227-234

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  51. Published

    Vibration induced flow in a horizontal centrifugal casting

    Kharicha, A., Bohàcek, J., Ludwig, A. & Wu, M., 2012, Symposium on "CFD and Simulation in Materials Processing". p. 227-234

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  52. 2011
  53. Published

    Simulation of the Deformation of a Flexible Combo Bag in a DC Aluminium Casting

    Kharicha, A., Ludwig, A. & Wu, M., 20 Apr 2011, Supplemental Proceedings: Materials Fabrication, Properties, Characterization, and Modeling. Vol. 2. p. 273-278 6 p.

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

Previous 12 3 4 5 6 7 8 9 ...11 Next
View graph of relations

Latest Research Output

View more (528)