Aleksandar Stanojevic

(Former)

1 - 10 out of 19Page size: 10

Research output

  1. 2023
  2. Published

    In-Situ HT-EBSD Measurements and Calibration of Multi-class Model for Grain Growth and δ-phase Dissolution Kinetics of Alloy 718

    Raninger, P., Gruber, C., Costin, W., Stanojevic, A., Kozeschnik, E. & Stockinger, M., 2023, Proceedings of the 10th International Symposium on Superalloy 718 and Derivatives, 2023. Ott, E. A., Andersson, J., Sudbrack, C., Bi, Z., Bockenstedt, K., Dempster, I., Fahrmann, M., Jablonski, P., Kirka, M., Liu, X., Nagahama, D., Smith, T., Stockinger, M. & Wessman, A. (eds.). p. 93-106 14 p. (Minerals, Metals and Materials Series).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  3. Published

    Local Assessment of Mechanical Properties in Forged Alloy 718 Components Based on the Simulation of the Microstructure Evolution During Production

    Gruber, C., Raninger, P., Stanojevic, A., Godor, F., Gänser, H. P., Marsoner, S. & Stockinger, M., 2023, Proceedings of the 10th International Symposium on Superalloy 718 and Derivatives, 2023. Ott, E. A., Andersson, J., Sudbrack, C., Bi, Z., Bockenstedt, K., Dempster, I., Fahrmann, M., Jablonski, P., Kirka, M., Liu, X., Nagahama, D., Smith, T., Stockinger, M. & Wessman, A. (eds.). p. 49-63 15 p. (Minerals, Metals and Materials Series).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  4. 2021
  5. Published

    Simulation of dynamic and meta-dynamic recrystallization behavior of forged Alloy 718 parts using a multi-class grain size model

    Gruber, C., Raninger, P., Stanojevic, A., Godor, F., Rath, M., Kozeschnik, E. & Stockinger, M., Jan 2021, In: Materials. 14, 1, p. 1-15 15 p., 111.

    Research output: Contribution to journal › Article › Research › peer-review

  6. Published

    Eigenspannungsstabilität von Ti-6Al-4V Strukturkomponenten

    Stanojevic, A., 2021

    Research output: Thesis › Doctoral Thesis

  7. 2019
  8. Published

    Thermal relaxation of residual stresses in Ti-6-4

    Stanojevic, A., Oberwinkler, B. & Leitner, M., 2019, The World Conference on Titanium (Ti-2019).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  9. 2018

  10. Development of an automated property simulation tool for direct aged alloy 718 engine disk forgings

    Stockinger, M., Stanojevic, A., Wieser, V. & Raninger, P., 1 Jan 2018, Proceedings of the 9th International Symposium on Superalloy 718 and Derivatives: Energy, Aerospace, and Industrial Applications. Ott, E., Sudbrack, C., Liu, X., Dempster, I., Heck, K., Bockenstedt, K., Jablonski, P., Kaplan, M., Andersson, J., Bi, Z., Groh, J. & Nagahama, D. (eds.). Springer International Publishing, p. 353-367 15 p. (Minerals, Metals and Materials Series; vol. 2018-June).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  11. Optimization of the forging process window in respect of AGG, IGG and direct age effect in alloy 718 engine disks

    Stanojevic, A., Bucher, C., Gruber, M., Oberwinkler, B. & Stockinger, M., 1 Jan 2018, Proceedings of the 9th International Symposium on Superalloy 718 and Derivatives: Energy, Aerospace, and Industrial Applications. Ott, E., Sudbrack, C., Liu, X., Dempster, I., Heck, K., Bockenstedt, K., Jablonski, P., Kaplan, M., Andersson, J., Bi, Z., Groh, J. & Nagahama, D. (eds.). Springer International Publishing, p. 691-709 19 p. (Minerals, Metals and Materials Series; vol. 2018-June).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  12. 2016
  13. Published

    Estimation of material parameters in nonlinear hardening plasticity models and strain life curves for CuAg alloy

    Novak, J. S., Benasciutti, D., De Bona, F., Stanojević, A., De Luca, A. & Raffaglio, Y., 14 Apr 2016, In: IOP Conference Series: Materials Science and Engineering. 119, 1, 012020.

    Research output: Contribution to journal › Conference article › peer-review

  14. Published

    Thermal stability of residual stresses in Ti-6Al-4V components

    Stanojevic, A., Angerer, P. & Oberwinkler, B., 14 Apr 2016, In: IOP Conference Series: Materials Science and Engineering. 119, 1, 012007.

    Research output: Contribution to journal › Conference article › peer-review

  15. 2015
  16. Published

    Thermo-Mechanical Finite Element Simulation and Fatigue Life Assessment of a Copper Mould for Continuous Casting of Steel: Fatigue Design 2015, International Conference Proceedings, 6th Edition

    Srnec Novak, J., Benasciutti, D., De Bona, F., Stanojevic, A. & Huter, P., 29 Dec 2015, In: Procedia Engineering. 133, p. 688–697

    Research output: Contribution to journal › Article › Research › peer-review

Previous 1 2 Next
View graph of relations

Latest Research Output

View more (19)