Montanuniversität

Organisational unit: University

551 - 600 out of 33,839Page size: 50

Research output

  1. 2024
  2. Published

    Influence of broad ion beam polishing on the surface roughness of hydrated cement paste and its implications on microstructural analysis

    Sammer, T., Shi, X., Khan, M. Z., Matkovic, A., Teichert, C. & Raith, J., 1 Jun 2024, In: Cement and concrete research. 182.2024, August, 11 p., 107555.

    Research output: Contribution to journal › Article › Research › peer-review

  3. Published

    Ab initio study of oxygen vacancy filament formation at Ta/HfO2 interface

    Zhang, D., Wang, J., Wu, Q., Du, Y. & Holec, D., Jun 2024, In: Surfaces and Interfaces. 49.2024, June, 11 p., 104418.

    Research output: Contribution to journal › Article › Research › peer-review

  4. Published

    Advancements in State-of-the-Art Simulation of the Slag in ESR Process

    Karimi Sibaki, E. & Kharicha, A., Jun 2024.

    Research output: Contribution to conference › Poster › Research

  5. Published

    Asymmetric supercapacitors based on biomass-derived porous activated carbon (PAC)/1D manganese oxide (MnO2) electrodes with high power and energy densities

    Lee, Y.-S., Selvaraj, A. R., Kostoglou, N., Rebholz, C., Rajendiran, R., Raman, V., Kim, H., Rajesh, J. A., Nagulapati, V. M., Oh, T. H., Jerome, P. & Kim, S.-S., Jun 2024, In: Materials science and engineering B (Solid-state materials for advanced technology). 304.2024, June, 10 p., 117368.

    Research output: Contribution to journal › Article › Research › peer-review

  6. Published

    CFD modelling of slag fuming, with focus on freeze-lining formation

    Gomes Rodrigues, C., Wu, M., Chintinne, M., Ishmurzin, A., Hackl, G., Voller, N., Ludwig, A. & Kharicha, A., Jun 2024, p. 839-846. 8 p.

    Research output: Contribution to conference › Paper › peer-review

  7. Published

    Characterization of mineral waste as potential precursors for alkali-activated materials

    Ratz, B., Sedlazeck, K. P., Raic, S., Steindl, F. R., Rudic, O. & Grengg, C., Jun 2024, 11th International Conference on Sustainable Solid Waste Management.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  8. Published

    Crack characterization in manganese steel using a µ-bolometer camera and an air-cooled inductor

    Tuschl, C., Oswald-Tranta, B., Dornig, P., Künstner, D., Pötz, M. & Eck, S., Jun 2024, Thermosense: Thermal Infrared Applications XLVI. Avdelidis, N. P. (ed.). SPIE, 8 p. (Proceedings of SPIE - The International Society for Optical Engineering; vol. 13047).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  9. Published

    Detachment of a Soluble Particle at the Slag-Argon Interface: CFD Study and Experimental Observations

    Zhang, X., Michelic, S. K., Pirker, S. & Saeedipour, M., Jun 2024, In: Metallurgical and materials transactions. B, Process metallurgy and materials processing science. 55.2024, 3, p. 1442-1454 13 p.

    Research output: Contribution to journal › Article › Research › peer-review

  10. Published

    Determination of transient heat transfer by cooling channel in high-pressure die casting using inverse method

    Bohacek, J., Mraz, K., Hvozda, J., Lang, F., Raudensky, M., Vakhrushev, A., Karimi Sibaki, E. & Kharicha, A., Jun 2024. 6 p.

    Research output: Contribution to conference › Paper › peer-review

  11. Published

    Effects of the asymmetric and oscillating turbulent melt flow on the heat transfer and solidification inside the thin slab continuous casting mold under the applied electromagnetic brake

    Vakhrushev, A., Karimi Sibaki, E., Wu, M., Tang, Y., Hackl, G., Watzinger, J. & Kharicha, A., Jun 2024.

    Research output: Contribution to conference › Poster › Research

  12. Published

    Effects of the asymmetric and oscillating turbulent melt flow on the heat transfer and solidification inside the thin slab continuous casting (TSC) mold under the applied electromagnetic brake (EMBr)

    Vakhrushev, A., Karimi Sibaki, E., Wu, M., Tang, Y., Hackl, G., Watzinger, J., Bohacek, J. & Kharicha, A., Jun 2024. 6 p.

    Research output: Contribution to conference › Paper › peer-review

  13. Published

    fs-laser preparation of half grid specimens for atom probe tomography and transmission electron microscopy

    Tkadletz, M., Schiester, M., Waldl, H., Schusser, G., Krause, M. & Schalk, N., Jun 2024, In: Materials Today Communications. 39.2024, June, 6 p., 108672.

    Research output: Contribution to journal › Article › Research › peer-review

  14. Published

    Near-infrared spectroscopy in resin transfer molding—determination of the degree of cure

    Salzmann, M., Märzinger, W., Teuchtmann, M., Ravindran, B., Kirschnick, U. & Fauster, E., Jun 2024, In: International Journal of Advanced Manufacturing Technology. 132.2024, 11-12, p. 5557-5565 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  15. Published

    On the conditions for the occurrence of crystal avalanches during alloy solidification

    Siyahatshayesteh, G., Ludwig, A., Stefan-Kharicha, M., Wu, M. & Kharicha, A., Jun 2024. 6 p.

    Research output: Contribution to conference › Paper › peer-review

  16. Published

    Oxygen Distribution at the Hot Spot in BOF Steelmaking

    Mitas, B. & Schenk, J., Jun 2024, In: Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science. 55.2024, 3, p. 1680-1689 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  17. Published

    Probing local adhesion: A miniaturized multi-photon lithography design demonstrated on silanized vs. untreated surfaces

    Jelinek, A., Rossegger, E., Schlögl, S., Kiener, D. & Alfreider, M., Jun 2024, In: Materials and Design. 242.2024, June, 13 p., 112994.

    Research output: Contribution to journal › Article › Research › peer-review

  18. Published

    Slurry Transport System of the ROBOMINERS Prototype

    Berner, M., Pinkse, T. & Riaz, S., Jun 2024, In: Mining Report. 160.2024, 3, p. 252-262 11 p.

    Research output: Contribution to journal › Article › Research

  19. Published

    Systematisches Zusammenwirken von Dekarbonisierung und Kreislaufwirtschaft am Beispiel der österreichischen Industrie

    Haslauer, P. & Pomberger, R., Jun 2024, Mineralische Nebenprodukte und Abfälle 11: Aschen, Schlacke, Stäube und Baurestmassen. p. 244 - 258

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  20. Published

    Tornado flow inside Electric Arc Furnace driven by External Magnetic Field

    Al Nasser, M., Redl, C., Holzgruber, H., Ishmurzin, A., Voller, N., Hackl, G. & Kharicha, A., Jun 2024.

    Research output: Contribution to conference › Poster › Research

  21. Published

    Towards Sustainability: Exploring Hydrogen Arc utilization in Electric Arc Furnaces

    Kharicha, A., Al Nasser, M., Redl, C., Holzgruber, H., Ishmurzin, A., Voller, N. & Hackl, G., Jun 2024.

    Research output: Contribution to conference › Poster › Research

  22. Published

    Improving the corrosion resistance of 7055 alloy by manipulating passivation film through trace addition of TiB2 nanoparticles

    Li, X., Wang, W., Wu, Y., Kang, H., Guo, E., LI, J., Chen, Z., Xu, Y. & Wang, T., 30 May 2024, In: Applied surface science. 656.2024, 30 May, 159722.

    Research output: Contribution to journal › Article › Research › peer-review

  23. E-pub ahead of print

    Nanocomposite versus solid solution formation in the TiSiN system

    Schalk, N., Moritz, Y., Nayak, G. K., Holec, D., Hugenschmidt, C., Burwitz, V. V., Mathes, L., Schiester, M., Saringer, C., Czettl, C., Pohler, M., Mitterer, C. & Tkadletz, M., 30 May 2024, (E-pub ahead of print) In: Acta materialia. 275.2024, 15 August, 10 p., 120063.

    Research output: Contribution to journal › Article › Research › peer-review

  24. E-pub ahead of print

    Artificial thermal shock cracks in WRe – A proof of concept study

    Sommerauer, M., Siller, M., Pippan, R., Bostrom, N. & Maier-Kiener, V., 29 May 2024, (E-pub ahead of print) In: Nuclear Materials and Energy. 39.2024, June, 8 p., 101685.

    Research output: Contribution to journal › Article › Research › peer-review

  25. E-pub ahead of print

    Critical properties of plastic packaging waste for recycling: A case study on non-beverage plastic bottles in an urban MSW system in Austria

    Gritsch, L., Breslmayer, G., Rainer, R., Stipanovic, H., Tischberger-Aldrian, A. & Lederer, J., 29 May 2024, (E-pub ahead of print) In: Waste management. 185.2024, 30 July, p. 10-24 15 p.

    Research output: Contribution to journal › Article › Research › peer-review

  26. Published

    Optimizing the tunnel ventilation design related to respirable dust in tunnelling by using CFD

    Wei, R., Galler, R. & Weiß, C., 29 May 2024.

    Research output: Contribution to conference › Paper › peer-review

  27. Published

    Scalable synthesis of biomass-derived three-dimensional hierarchical porous activated carbons for electrochemical energy storage and hydrogen physisorption

    Selvaraj, A. R., Kostoglou, N., Rajendiran, R., Cho, I., Rebholz, C., Chakravarthi, N. D. & Prabakar, K., 28 May 2024, In: Journal of energy storage. 92.2024, 1 July, 10 p., 112085.

    Research output: Contribution to journal › Article › Research › peer-review

  28. Published

    A Review of Tailings Dam Safety Monitoring Guidelines and Systems

    Zare, M., Nasategay, F., Gomez, J. A., Moayedi Far, A. & Sattarvand, J., 27 May 2024, In: Minerals. 14.2024, 6, 28 p., 551.

    Research output: Contribution to journal › Article › Research › peer-review

  29. Published

    Experimental investigation and computational thermodynamics of the quaternary system Fe-C-Mn-S

    Littringer, R., Bernhard, M. C. (Co-editor), Presoly, P. (Co-editor), Kang, Y.-B. (Co-editor), Park, W.-B. (Co-editor) & Bernhard, C. (Co-editor), 27 May 2024.

    Research output: Contribution to conference › Poster › Research

  30. Published

    Hybrid data-driven thermodynamically-based temperature modeling of secondary steelmaking

    Kavic, D., Bernhard, M. C., Rössler, R. & Bernhard, C., 27 May 2024.

    Research output: Contribution to conference › Poster › Research › peer-review

  31. Published

    Interplay between alloying and tramp element effects on temper embrittlement in bcc iron: DFT and thermodynamic insights

    Reiners-Sakic, A., Schnitzer, R. & Holec, D., 27 May 2024, In: Acta materialia. 275.2024, 15 August, 12 p., 120044.

    Research output: Contribution to journal › Article › Research › peer-review

  32. Published

    Multi-Material 3D Printing of Biobased Epoxy Resins

    Bergoglio, M., Rossegger, E., Schlögl, S., Griesser, T., Waly, C., Arbeiter, F. & Sangermano, M., 27 May 2024, In: Polymers. 16.2024, 11, 18 p., 1510.

    Research output: Contribution to journal › Article › Research › peer-review

  33. Published

    Experimental and thermodynamic evaluation of the Fe-Si system and application to the processing of silicon steels

    Bernhard, M. C., Presoly, P., Kavic, D., Wi, T.-G., Park, W.-B., Rössler, R., Jungreithmeier, A., Ilie, S., Bernhard, C. & Kang, Y.-B., 26 May 2024, Conference Proceedings of 51st Conference on Computer Coupling of Phase Diagrams and Thermochemistry (CALPHAD LI).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  34. Published

    Extended Regression Analysis for Debye–Einstein Models Describing Low Temperature Heat Capacity Data of Solids

    Gamsjäger, E. & Wiessner, M., 26 May 2024, In: Entropy. 26.2024, 6, 16 p., 452.

    Research output: Contribution to journal › Article › Research › peer-review

  35. Published

    How DSC measurements and CALPHAD helps to avoid breakouts during the continuous casting of peritectic steels

    Presoly, P., Bernhard, M. C., Bernhard, C., Hahn, S. & Ilie, S., 26 May 2024, Conference Proceedings of 51st Conference on Computer Coupling of Phase Diagrams and Thermochemistry (CALPHAD LI).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  36. Published

    Microstructural investigation of the undercooled austenite in the Fe-C

    Jacob, A., Presoly, P., Gürtenhofer, R., Kozeschnik, E. & Povoden-Karadeniz, E., 26 May 2024, Conference Proceedings of 51st Conference on Computer Coupling of Phase Diagrams and Thermochemistry (CALPHAD LI).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  37. Published

    Predictive Model for Catalytic Methane Pyrolysis

    Pototschnig, U., Matas, M., Scheiblehner, D., Neuschitzer, D., Obenaus-Emler, R., Antrekowitsch, H. & Holec, D., 25 May 2024, In: Journal of physical chemistry C (C, Nanomaterials and interfaces). 128.2024, 22, p. 9034-9040 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  38. Published

    All van der Waals Semiconducting PtSe2 Field Effect Transistors with Low Contact Resistance Graphite Electrodes

    Aslam, M. A., Leitner, S., Tyagi, S., Provias, A., Tkachuk, V., Pavlica, E., Dienstleder, M., Knez, D., Watanabe, K., Taniguchi, T., Yan, D., Shi, Y., Knobloch, T., Waltl, M., Schwingenschlögl, U., Grasser, T. & Matković, A., 24 May 2024, In: Nano Letters. 24.2024, 22, p. 6529-6537 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  39. Published

    Improved conditions for the distributivity of the product for σ-algebras with respect to the intersection

    Steinicke, A. & Rao, K. P. S. B., 24 May 2024, In: Mathematica Slovaca. 74.2024, 2, p. 331-338 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  40. Published

    An Investigation on The Effects of Post-industrial Glass Fiber Flakes on the Properties of Recycled Polypropylene

    Raguz, I., Shahroodi, Z., Krempl, N., Arbeiter, F., Friesenbichler, W. & Holzer, C., 23 May 2024.

    Research output: Contribution to conference › Paper › peer-review

  41. Published

    Applied Life Cycle Based Environmental Analysis: A Case Study of Steel Based Wear Parts

    Feichtinger, G., Schlar, D., Mark, D. & Grabner, C., 23 May 2024.

    Research output: Contribution to conference › Poster › Research

  42. Published

    Compaction behaviour of textile reinforcements

    Bender, M., 23 May 2024.

    Research output: Contribution to conference › Poster › Transfer

  43. Published

    Computer Simulations with Particles: Innovating Bulk Solids Equipment with Virtual Prototyping

    Fimbinger, E. & Falkner, P., 23 May 2024, p. 2. 1 p.

    Research output: Contribution to conference › Poster › Transfer

  44. Published

    Demonstration plant for hydrogen and carbon production via methane pyrolysis

    Wibner, S. & Sprung, A., 23 May 2024.

    Research output: Contribution to conference › Poster › Research

  45. Published

    Detection of characteristic frequencies of roller bearing deflections

    Kraffczyk, F., 23 May 2024.

    Research output: Contribution to conference › Poster › Research

  46. Published

    Fatigue investigations under complex loading conditions in the elasto-plastic material regime

    Oberreiter, P., 23 May 2024.

    Research output: Contribution to conference › Poster › Research

  47. Published

    High Temperature Electrochemistry: Investigating the fundamentals of metallurgical processes from an electrochemical perspective

    Moll, S., Weiß, C., Schlemmer, N., Wilhelm, S. & Faltner, D., 23 May 2024.

    Research output: Contribution to conference › Poster › Transfer

  48. Published

    Hydrogen uptake and embrittlement of steels under highest pressures

    Eichinger, M. & Mori, G. K., 23 May 2024.

    Research output: Contribution to conference › Poster › Research

  49. Published

    Impact of microstructural features on the fatigue strength of cast alloys by means of a layer-based approach

    Oberreiter, M., 23 May 2024.

    Research output: Contribution to conference › Poster › Research

  50. Published

    Influence of corrosion on the service life of aluminium alloys

    Schönowitz, M., 23 May 2024.

    Research output: Contribution to conference › Poster › Research

  51. Published

    Local fatigue strength assessment of cast steel components considering manufacturing effects

    Horvath, M., 23 May 2024.

    Research output: Contribution to conference › Poster › Research

Previous 1...8 9 10 11 12 13 14 15 ...677 Next
View graph of relations

Contact information

Franz-Josef-Strasse 18, 8700 Leoben
Austria
  • Main phone number: +43 3842 402