Department Polymer Engineering and Science

Organisational unit: Departments and Institutes

3551 - 3600 out of 4,193Page size: 50

Research output

  1. 2008
  2. Published

    Spectroscopical Investigation of Ski Base Materials

    Fischer, J., Wallner, G. & Pieber, A., 2008, In: Macromolecular Symposia. 265, p. 28-36

    Research output: Contribution to journal › Article › Research › peer-review

  3. Published

    Spectroscopic Investigations of Phase-Separated Thermotropic Layers Based on UV Cured Acrylate Resins

    Resch, K., Wallner, G. & Lang, R., 2008, In: Macromolecular Symposia. 265, p. 49-60

    Research output: Contribution to journal › Article › Research › peer-review

  4. Published

    Structure-property-correlations of flexible model clear coats

    Buder-Stroizsnigg, M., Wallner, G., Strauß, B. & Jandel, L., 2008.

    Research output: Contribution to conference › Poster › Research › peer-review

  5. Published

    Surface modification of thin organic layers using the Photo Fries reaction

    Höfler, T., Grießer, T., Hernandéz Sosa, G., Hlawacek, G., Hoffmann, H., Shen, Q., Track, A., Ramsey, M., Resel, R., Simbrunner, C., Sitter, H., Teichert, C., Trimmel, G. & Kern, W., 2008.

    Research output: Contribution to conference › Poster › Research › peer-review

  6. Published

    Synthesis of a Photosensitive Thiocyanate-Functionalized Trialkoxysilane and Its Application in Patterned Surface Modifications

    Lex, A., Pacher, P., Werzer, O., Track, A. M., Shen, Q., Schennach, R., Koller, G., Hlawacek, G., Zojer, E., Resel, R., Ramsey, M. G., Teichert, C., Kern, W. & Trimmel, G., 2008, In: Chemistry of materials. 20, p. 2009-2015

    Research output: Contribution to journal › Article › Research › peer-review

  7. Published

    Tensile Tests for UP-Resin Distitron 412 V2 with Various Filler Types (dry and wet) - Part II

    Pilz, G. & Lang, R., 2008

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  8. Published

    The effect of cure condition on the apparent interlaminar shear strength, the glass transition temperature and the interlaminar fracture toughness for a carbon fiber epoxy laminate

    Pinter, G. & Lang, R., 2008

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  9. Published

    Thermoanalytical investigation of thermoset samples

    Wallner, G. & Lang, R., 2008

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  10. Published

    Thermo-mechanische und bruchmechanische Charakterisierung impact-modifizierte Epoxidharze

    Pilz, G. & Karpf, R., 2008

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  11. Published

    Thermo-mechanische und bruchmechanische Charakterisierung impact-modifizierter Epoxidharze - Zusammenfassender Vergleich

    Pilz, G. & Karpf, R., 2008

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  12. Published

    Thermotropic materials for overheating protection of solar collectors

    Resch, K. & Wallner, G., 2008, 1st Intern. Congress on Heating, Cooling and Buildings. p. 1-6

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  13. Published

    The stability of 11-MUA SAMs grown on gold surfaces

    Stettner, J., Frank, P., Grießer, T., Trimmel, G., Schennach, R., Resel, R. & Winkler, A., 2008.

    Research output: Contribution to conference › Poster › Research › peer-review

  14. Published

    To the Detection of Non-metallic Inclusions in Tool Steel Specimens for Polymer Processing Applications

    Gallaun, U., 2008, 89 p.

    Research output: Thesis › Master's Thesis

  15. Published

    Two-Photon Photopolymerization of selected monomers in an inert silicon matrix

    Bichler, S., Mühlbacher, I., Feldbacher, S., Langer, G., Satzinger, V., Schmidt, V. & Kern, W., 2008.

    Research output: Contribution to conference › Poster › Research › peer-review

  16. Published

    Umformbare polymerbeschichtete Bleche - Polymerphysikalische Charakterisierung und Struktur/Eigenschafts-Beziehungen

    Buder-Stroißnigg, M., 2008

    Research output: Thesis › Doctoral Thesis

  17. Published

    Untersuchung des Tempereinflusses auf die Zugeigenschaften von gepressten E/P-Kraftzellstoff-Faservliesen

    Pilz, G. & Rausch-Schott, O., 2008

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  18. Published

    Untersuchungen zum abrasiven Verschleiß von niedrig- bzw. hoch legierten Kunststoff-Formenstählen mit einem verbesserten Verschleißmodell

    Weiermair, G., 2008

    Research output: Thesis › Diploma Thesis

  19. Published

    Untersuchungen zur Wärmeleitfähigkeit von Polypropylen mit mikroskaligen Füllstoffen bei hohen Drücken

    Kucher, C., 2008

    Research output: Thesis › Diploma Thesis

  20. Published

    UV assisted surface modification of polymer films using the photo-Fries reaction.

    Temmel, S., Höfler, T., Kern, W., Trimmel, G., Grießer, T. & Jakopic, G., 2008.

    Research output: Contribution to conference › Poster › Research › peer-review

  21. Published

    Verfahren zur Modifizierung von Kunststoffen sowie damit hergestellte Formkörper

    Kern, W. (Inventor) & Buchgraber, C. (Inventor), 2008, Patent No. A1571/2006

    Research output: Patent

  22. Published

    Zugversuch an einem Composite-Bauteil (IOR flange test)

    Pinter, G. & Lang, R., 2008

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  23. Published

    δ-phase characterization of superalloy Allvac 718 Plus™

    Sommitsch, C., Stotter, C., Leitner, H., Mitsche, S., Letofsky-Papst, I. & Stockinger, M., 2008, TMS2008 - 137th Annual Meeting and Exhibition Supplemental Proceedings: Materials Processing and Properties. p. 63-68 6 p. (TMS Annual Meeting; vol. 2).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  24. 2007
  25. Published

    Investigations of the Rheology and Reactivity of Extrudable Wood-Resin Compounds

    Braun, J., Duretek, I., Müller, U., Friesenbichler, W. & Endesfelder, A., 3 Apr 2007, In: Monatshefte für Chemie = Chemical monthly. 138.2007, p. 337-341 5 p.

    Research output: Contribution to journal › Article › Research › peer-review

  26. Published

    Simulation des spritzgießprozesses von mikrobauteilen

    Cramer, A., Michaeli, W., Friesenbichler, W. & Duretek, I., 1 Jan 2007, In: Zeitschrift Kunststofftechnik = Journal of plastics technology. 1

    Research output: Contribution to journal › Article › Research › peer-review

  27. Published

    3D-Oberflächenvermessung von strukturierten Aluminiumfolien

    Berger, G. & Lang, R., 2007

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  28. Published

    4-Bromobenzyl isocanate versus benzyl isocyanate- New film-forming electrolyte additives and overcharge protection additives for lithium ion batteries

    Kern, W. & Winter, M., 2007, In: Journal of power sources. 174, p. 637-642

    Research output: Contribution to journal › Article › Research › peer-review

  29. Published

    A340-500/-600 RTM CHF Subcomponent Tests

    Pinter, G. & Lang, R., 2007

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  30. Published

    Abhängigkeit des Exfolierungsgrades von Silikatschichten in einer Polymermatrix vom Compatibilizer - Nanoclay Mischverhältnis

    Laske, S., Kracalik, M., Gschweitl, M. & Langecker, G., 2007, 12 Problemseminar "Polymermischungen" Gefüllte und verstärkte Polymerblends - Nanoblends. p. 20-20

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  31. Published

    Abrasive/corresive wear on plastic mold steels, measured under practical processing conditions

    Friesenbichler, W., 2007.

    Research output: Contribution to conference › Poster › Research › peer-review

  32. Published

    Abrasive/corresive wear on plastic mold steels, measured under practical processing conditions

    Friesenbichler, W., Berger, G. & Perko, J., 2007, PPS-23 Program and Book of Abstracts. p. 176-176

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  33. Published

    Abrasive/corresive wear on plastic mold steels, measured under practical processing conditions: PPS-23 The Polymer Processing Society 23rd Annual Meeting

    Friesenbichler, W., Berger, G. & Perko, J., 2007

    Research output: Non-textual form › Web publication/site › Research

  34. Published

    Aging behavior of polymeric materials for solar thermal absorber applications

    Kahlen, S. & Wallner, G., 2007, Solar Energy and Human Settlement. p. 519-523

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  35. Published

    All Polymeric Flat-Plate Collector - Potential of Thermotropic Layers to Prevent Overheating

    Resch, K. & Wallner, G., 2007, Solar Energy and Human Settlement. p. 561-565

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  36. Published

    Analog triggered image acquisation for optical measurement under cyclic load conditions

    Vezer, S., Steinberger, R. & Major, Z., 2007.

    Research output: Contribution to conference › Poster › Research › peer-review

  37. Published

    Analog triggered image acquisation for optical measurment under cyclic load conditions

    Vezer, S., Steinberger, R. & Major, Z., 2007.

    Research output: Contribution to conference › Poster › Research › peer-review

  38. Published

    Analyse des Alterungszustandes von PP-Rohren

    Pinter, G. & Lang, R., 2007

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  39. Published

    Analyse eines Profils

    Wallner, G. & Lang, R., 2007

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  40. Published

    Analyse eines Spritzgussbauteiles

    Wallner, G. & Lang, R., 2007

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  41. Published

    Analyse von Tiefziehmaterialien

    Wallner, G. & Lang, R., 2007

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  42. Published

    Anwendung von neuronalen Netzen für die Materialdatengenerierung am Beispiel von Polyamid

    Fuchs, P., 2007, 79 p.

    Research output: Thesis › Diploma Thesis

  43. Published

    Application of full-field strain and temperature measurement and analysis to polymer testing

    Major, Z., Steinberger, R., Feichter, C., Jerabek, M. & Lang, R., 2007, Experimental Analysis of Nano and Engineering Materials and Structures. p. 473-474

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  44. Published

    A test concept for lifetime prediction of polyethylene pressure pipes

    Pinter, G., Lang, R. & Haager, M., 2007, In: Monatshefte für Chemie = Chemical monthly. 138, p. 347-355

    Research output: Contribution to journal › Article › Research › peer-review

  45. Published

    Aufbau und Inbetriebnahme einer Anlage zur Herstellung von exfolierten Nanocomposites

    Gschweitl, M., 2007

    Research output: Thesis › Diploma Thesis

  46. Published

    Aufheizen des Halbzeugs beim Thermoformen

    Fertschej, A., 2007, Fachtagung Thermoformen technische Bauteile - Vom Design zum Fertigteil. p. 1-26

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  47. Published

    Berechnungsmodell für Maddock- und Wendelscherteile in der Einschneckenplastifiziertechnologie

    Thiel, H., 2007, 97 p.

    Research output: Thesis › Diploma Thesis

  48. Published

    Bestimmung der Druckfestigkeit von CFK-Laminatwerkstoffen

    Pilz, G. & Lang, R., 2007

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  49. Published

    Bestimmung der Kriech- und Zugeigenschaften für einen PTFE-Dichtungswerkstoff

    Pilz, G. & Lang, R., 2007

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  50. Published

    Bestimmung der Längenausdehnung von Eisstockzwischenplatten aus PA6 GF40

    Pinter, G. & Lang, R., 2007

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  51. Published

    Bestimmung der mechanischen Eigenschaften eines faserverstärkten thermoplastischen Hochleistungswerkstoffes

    Pinter, G. & Lang, R., 2007

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  52. Published

    Bestimmung von ausgewählten mechanischen Eigenschaften eines faserverstärkten thermoplastischen Hochleistungswerkstoffes

    Pinter, G. & Lang, R., 2007

    Research output: Book/Report › Commissioned report › Transfer › peer-review

Previous 1...68 69 70 71 72 73 74 75 ...84 Next
View graph of relations

Contact information

Otto Glöckel-Straße 2, 8700 Leoben
  • Main phone number: +43 3842 402 2301