Department Polymer Engineering and Science

Organisational unit: Departments and Institutes

3501 - 3600 out of 4,192Page size: 100

Research output

  1. 2008
  2. Published

    Mechanische Basischarakterisierung der Epoxidharze M13 und M14 im Trocken- und Feuchtzustand

    Pilz, G. & Karpf, R., 2008

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  3. Published

    Mechanische Eigenschaften von gepressten PP-Zellstoff-Faservliesen (Serien 08 bis 14)

    Pilz, G. & Rausch-Schott, O., 2008

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  4. Published

    Micro-Mechanical Modelling of Heterogeneous Polypropylene Compounds

    Herbst, H., 2008

    Research output: Thesis › Doctoral Thesis

  5. Published

    Micrometer and nanometer scale patterning using the photo-Fries rearrangement: towards selective execution of molecular transformations with nanoscale spatial resolution

    Griesser, T., Adams, J., Wappel, J., Kern, W., Leggett, G. J. & Trimmel, G., 2008, In: Langmuir. 24, p. 12420-12425

    Research output: Contribution to journal › Article › Research › peer-review

  6. Published

    Modeling of an all polymeric flat-plate collector with thermotropic overheating protection

    Resch, K., Hausner, R. & Lang, R., 2008, 1st Intern. Congress on Heating, Cooling and Buildings. p. 1-6

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  7. Published

    Modellierung von Kunststoffkollektoren mit Überhitzungsschutz

    Hausner, R., Resch, K. & Wallner, G., 2008, Modellierung von Kunststoffkollektoren mit Überhitzungsschutz. Montanuniversität Leoben, Institut für Werkstoffkunde und -prüfung der Kunststoffe, p. IV-1-IV-8

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  8. Published

    Modification of polyethylene by VUV irradiation in the presence of trimethylsilane and oxygen

    Daschiel, U., Spanring, J., Ebel, M. F., Svagera, R., Schröttner, H. & Kern, W., 2008, In: Macromolecular chemistry and physics. 209, p. 1232-1239

    Research output: Contribution to journal › Article › Research › peer-review

  9. Published

    Modulation of the surface properties of reactive polymers by photo-Fries rearrangement

    Temmel, S., Höfler, T. & Kern, W., 2008, Contact angle, Wettability and Adhesion. p. 229-238

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  10. Published

    Modulation of the surfaces properties of reactive polymers by photo-Fries rearrangement

    Temmel, S., Höfler, T. & Kern, W., 2008, Contact Angle, Wettability and Adhesion. Vol. 5. p. 229-238

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  11. Published

    New Insights into Feedstock Behaviour and Injection Moulding Simulation for PIM

    Kukla, C., Duretek, I., Friesenbichler, W. & Thornagel, M., 2008, Euro PM2008 Proceedings Vol 2. p. 287-292

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  12. Published

    Novel thermoplastic silicone elastomers as gelling agent for silicone fluids

    Rieß, G. & Schmidt, H.-W., 2008.

    Research output: Contribution to conference › Poster › Research › peer-review

  13. Published

    Oberflächenkonzepte für großflächige Strukturbauteile mit Class-A-Anforderungen aus duroplastischen Werkstoffen

    Horejsi, K., 2008

    Research output: Thesis › Master's Thesis

  14. Published

    Optimization of Compatibilizer Admixture in Polypropylene-Organclay Nanocomposites by Extensional Rheology

    Kracalik, M., Laske, S., Feuchter, M., Maier, G., Pinter, G., Friesenbichler, W. & Langecker, G., 2008, ASPM 2008 - 9th Austrian Polymer Meeting - Book of Abstracts. p. 43-43

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  15. Published

    Overheating protection with thermotropic resin systems: Effect of material structure and morphology on light-shielding efficiency

    Resch, K., Fischer, J., Weber, A. & Wallner, G., 2008, 1st Intern. Congress on Heating, Cooling and Buildings. p. 1-6

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  16. Published

    Patterned photosensitive ultrathin films: combining friction force microscopy and contact angle measurements

    Shen, Q., Hlawacek, G., Gürkan, N., Teichert, C., Lex, A., Trimmel, G. & Kern, W., 2008.

    Research output: Contribution to conference › Poster › Research › peer-review

  17. Published

    Pattern Generation in UV-Reaktive Polymer Films and Self-Assembled Manolayers (SAMs) Using the Photo-Fries Reaction

    Höfler, T., Grießer, T., Jakopic, G., Hlawacek, G., Track, A., Shen, Q., Teichert, C., Ramsey, M., Trimmel, G. & Kern, W., 2008.

    Research output: Contribution to conference › Poster › Research › peer-review

  18. Published

    Photoassisted surface modification and patterning by UV irradiation in the presence of reactive gases

    Daschiel, U., Spanring, J., Ebel, M. F., Svagera, R., Schröttner, H., Rieß, G. & Kern, W., 2008.

    Research output: Contribution to conference › Poster › Research › peer-review

  19. Published

    Photoassisted surface modification of polyethylene by UV irradiation in the presence of trimethylsilane

    Daschiel, U., Spanring, J., Ebel, M. F., Svagera, R., Schröttner, H., Rieß, G. & Kern, W., 2008.

    Research output: Contribution to conference › Poster › Research › peer-review

  20. Published

    Photochemical Pre-vulcanisation of Natural Rubber Latex: A New Process Towards Non-Allergenic Latex Articles

    Schlögl, S., Temel, A., Schaller, R., Holzner, A. & Kern, W., 2008, Conference Proceedings: Latex and Synthetic Polymer Dispersions 2008.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  21. Published

    Photochemical pre-vulcanization of NR latex: a new process towards non-allergenic latex articles

    Schloegl, S., Temel, A., Schaller, R., Holzner, A. & Kern, W., 2008, Conference Proceedings of Latex and Synthetic Polymer Dispersions 2008. p. 8/1-8/8

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  22. Published

    Photoelectron Spectroscopic Investigations of Photosensitive Self-Assembled Monolayers

    Track, A., Höfler, T., Grießer, T., Lex, A., Trimmel, G., Kern, W., Koller, G. & Ramsey, M. G., 2008.

    Research output: Contribution to conference › Poster › Research › peer-review

  23. Published

    Photo-Fries Rearrangement in Polymeric Media: An Investigation on Fully Aromatic Esters Containing the Naphthyl Chromophore.

    Hoefler, T., Griesser, T., Gruber, M., Jakopic, G., Trimmel, G. & Kern, W., 2008, In: Macromolecular chemistry and physics. 209, p. 488-498

    Research output: Contribution to journal › Article › Research › peer-review

  24. Published

    Photolithographic Patterning of Polymer Surfaces Using the Photo-Freis Rearrangement: Selective Postexposure Reactions

    Grießer, T., Höfler, T., Temmel, S., Kern, W. & Trimmel, G., 2008, In: Chemistry of materials. 19, p. 3011-3016

    Research output: Contribution to journal › Article › Research › peer-review

  25. Published

    Photolithographic Patterning of Polymer Surfaces Using the Photo-Fries Rearrangement of Aromatic Amides.

    Grießer, T., Kuhlmann, J.-C., Wieser, M., Jakopic, G., Kern, W. & Trimmel, G., 2008.

    Research output: Contribution to conference › Poster › Research › peer-review

  26. Published

    Photolithographic Patterning of Polymer Surfaces Using the Photo-Fries Rearrangement of Aromatic Amides and Aromatic Thioesters.

    Höfler, T., Grießer, T., Jakopic, G., Trimmel, G. & Kern, W., 2008.

    Research output: Contribution to conference › Poster › Research › peer-review

  27. Published

    Photolithographic Patterning of Self Assembled Monolayers on Gold via The Photo-Fries Rearrangement.

    Grießer, T., Höfler, T., Track, A., Koller, G., Ramsey, M., Hlawacek, G., Teichert, C., Leggett, G. J., Adams, J., Kern, W. & Trimmel, G., 2008.

    Research output: Contribution to conference › Poster › Research › peer-review

  28. Published

    Photoreactive Polymers with Tuneable Refractive Index

    Daschiel, U., Jakopic, G., Schmidt, V., Satzinger, V., Rieß, G. & Kern, W., 2008.

    Research output: Contribution to conference › Poster › Research › peer-review

  29. Published

    Poission's ratio of polypropylen in relaxation, creep and monotinic tensile tests

    Tscharnuter, D., Jerabek, M. & Major, Z., 2008, Mechanics of time Dependent Materials Conference. p. 1-14

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  30. Published

    Polar Ethylene Copolymer Films for Solar Applications - Optical Properties and Aging Behavior

    Oreski, G., 2008

    Research output: Thesis › Doctoral Thesis

  31. Published

    Polymere Funktionswerkstoffe für die Solartechnik: polymerphysikalische Charakterisierung, Modellierung und Anwendungsdemonstration

    Wallner, G. M., 2008

    Research output: Thesis › Habilitation thesis › peer-review

  32. Published

    Polymer Electrolyte for Lithium Batteries Based on Photochemically Crosslinked Poly(ethylene oxide) and Ionic Liquid

    Rupp, B., Schmuck, M., Balducci, A., Winter, M. & Kern, W., 2008, In: European polymer journal. 44, p. 2986-2990

    Research output: Contribution to journal › Article › Research › peer-review

  33. Published

    Polymeric Materials for Solar Thermal Applications - Zwischenbericht

    Wallner, G., 2008

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  34. Published

    Polymeric Thermotropic Materials for Overheating Protection of Solar Collectors

    Resch-Fauster, K., 2008

    Research output: Thesis › Doctoral Thesis

  35. Published

    Polypropylene - Polyethylene Melts: Phase Structure Determination by Rheology

    Kock, C., Schausberger, A., Aust, N., Gahleitner, M. & Ingolic, E., 2008, The XVth International Congress on Rheology. p. 520-522

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  36. Published

    Preparation and Characterization of Partially Degraded High-Density Polyethylene in an Internal Mixer

    Mahendran, A. R., Aust, N., Vijayakumar, C. T. & Lederer, K., 2008, In: Polymer plastics technology and engineering (Polymer-plastics technology and engineering). 47, p. 1142-1146

    Research output: Contribution to journal › Article › Research › peer-review

  37. Published

    Preparation of Polymer-Nanocomposite-Masterbatch using a co-rotating twin screw extruder in combination with a melt pump

    Laske, S., Kracalik, M., Feuchter, M., Maier, G., Pinter, G. & Langecker, G., 2008, PPS-24. p. 96-96

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  38. Published

    Property and performance requirements for thermotropic layers to prevent overheating in an all polymeric flat-plate collector

    Wallner, G., Resch, K. & Hausner, R., 2008, In: Solar energy materials and solar cells. 92, p. 614-620

    Research output: Contribution to journal › Article › Research › peer-review

  39. Published

    Qualitätsgesicherte Aufbeereitung von Polymer-Nanocomposites unter Verwendung von in-line NIR-Spektroskopie

    Friesenbichler, W., Kracalik, M. & Laske, S., 2008, Extrusion - Rheologie und neue Technolgien zur Steigerung der Produktvität - Fortbildungsseminar. p. 1-16

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  40. Published

    Quality control of polymer nanocomposites compounding using small angle x-ray scattering

    Feuchter, M., Maier, G., Pinter, G., Kracalik, M. & Laske, S., 2008, ASPM 2008 - 9th Austrian Polymer Meeting - Book of Abstracts. p. 53-53

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  41. Published

    Ramanmikroskopische Analyse von Spritzgussteilen

    Fischer, J. & Wallner, G., 2008

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  42. Published

    Raman spectroscopical investigation of high performance coil coatings

    Fischer, J., Wallner, G., Strauß, B. & Jandel, L., 2008, ASPM 2008. p. 52-52

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  43. Published

    Ranking of PE pipe materials

    Pinter, G. & Lang, R., 2008

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  44. Published

    Reactive patterns and optical structures in polymer layers by UV induced rearrangement of aryl ester groups

    Kern, W., Grießer, T., Höfler, T., Daschiel, U., Hernandéz Sosa, G., Resel, R., Simbrunner, C., Sitter, H. & Trimmel, G., 2008.

    Research output: Contribution to conference › Poster › Research › peer-review

  45. Published

    Recycled PET Nanocomposites Improved by Silanization of Organclays

    Kracalik, M., Studenovský, M., Mikesov, J., Sikora, A., Thomann, R., Friedrich, C., Fortelný, I. & Simoník, J., 2008, In: VLK-News. 16. Jahrg., p. 4-13

    Research output: Contribution to journal › Article › Research › peer-review

  46. Published

    Recycled Poly(ethylene terephthalate) Reinforced With Basalt Fibres: Rheology, Structure, and Utility Properties

    Kracalik, M., Pospisil, L., Slouf, M., Mikesova, J., Sikora, A., Simonik, J. & Fortelny, I., 2008, In: Polymer Composites. 29, p. 437-442

    Research output: Contribution to journal › Article › Research › peer-review

  47. Published

    Rheological characterisation of polymer melts on an injection moulding machine using a new slit die measurement system

    Selvasankar, R. K., 2008, 95 p.

    Research output: Thesis › Master's Thesis

  48. Published

    Scanning Electron Microscopy (REM) for UP-Resins with Various Filler Types

    Pilz, G. & Lang, R., 2008

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  49. Published

    Self assembled monolayers: A study of 11-mercaptoundecanoic acid on Au-surfaces

    Stettner, J., Frank, P., Grießer, T., Trimmel, G., Schennach, R., Resel, R. & Winkler, A., 2008.

    Research output: Contribution to conference › Poster › Research › peer-review

  50. Published

    Small angle x-ray scattering as method to determine mechanism of despersion in polypropylene clay nanocomposites

    Feuchter, M., Maier, G., Pinter, G., Kracalik, M., Laske, S. & Langecker, G., 2008, P2008. p. A32-A32

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  51. Published

    Spectroscopical Investigation of Ski Base Materials

    Fischer, J., Wallner, G. & Pieber, A., 2008, In: Macromolecular Symposia. 265, p. 28-36

    Research output: Contribution to journal › Article › Research › peer-review

  52. Published

    Spectroscopic Investigations of Phase-Separated Thermotropic Layers Based on UV Cured Acrylate Resins

    Resch, K., Wallner, G. & Lang, R., 2008, In: Macromolecular Symposia. 265, p. 49-60

    Research output: Contribution to journal › Article › Research › peer-review

  53. Published

    Structure-property-correlations of flexible model clear coats

    Buder-Stroizsnigg, M., Wallner, G., Strauß, B. & Jandel, L., 2008.

    Research output: Contribution to conference › Poster › Research › peer-review

  54. Published

    Surface modification of thin organic layers using the Photo Fries reaction

    Höfler, T., Grießer, T., Hernandéz Sosa, G., Hlawacek, G., Hoffmann, H., Shen, Q., Track, A., Ramsey, M., Resel, R., Simbrunner, C., Sitter, H., Teichert, C., Trimmel, G. & Kern, W., 2008.

    Research output: Contribution to conference › Poster › Research › peer-review

  55. Published

    Synthesis of a Photosensitive Thiocyanate-Functionalized Trialkoxysilane and Its Application in Patterned Surface Modifications

    Lex, A., Pacher, P., Werzer, O., Track, A. M., Shen, Q., Schennach, R., Koller, G., Hlawacek, G., Zojer, E., Resel, R., Ramsey, M. G., Teichert, C., Kern, W. & Trimmel, G., 2008, In: Chemistry of materials. 20, p. 2009-2015

    Research output: Contribution to journal › Article › Research › peer-review

  56. Published

    Tensile Tests for UP-Resin Distitron 412 V2 with Various Filler Types (dry and wet) - Part II

    Pilz, G. & Lang, R., 2008

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  57. Published

    The effect of cure condition on the apparent interlaminar shear strength, the glass transition temperature and the interlaminar fracture toughness for a carbon fiber epoxy laminate

    Pinter, G. & Lang, R., 2008

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  58. Published

    Thermoanalytical investigation of thermoset samples

    Wallner, G. & Lang, R., 2008

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  59. Published

    Thermo-mechanische und bruchmechanische Charakterisierung impact-modifizierte Epoxidharze

    Pilz, G. & Karpf, R., 2008

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  60. Published

    Thermo-mechanische und bruchmechanische Charakterisierung impact-modifizierter Epoxidharze - Zusammenfassender Vergleich

    Pilz, G. & Karpf, R., 2008

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  61. Published

    Thermotropic materials for overheating protection of solar collectors

    Resch, K. & Wallner, G., 2008, 1st Intern. Congress on Heating, Cooling and Buildings. p. 1-6

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  62. Published

    The stability of 11-MUA SAMs grown on gold surfaces

    Stettner, J., Frank, P., Grießer, T., Trimmel, G., Schennach, R., Resel, R. & Winkler, A., 2008.

    Research output: Contribution to conference › Poster › Research › peer-review

  63. Published

    To the Detection of Non-metallic Inclusions in Tool Steel Specimens for Polymer Processing Applications

    Gallaun, U., 2008, 89 p.

    Research output: Thesis › Master's Thesis

  64. Published

    Two-Photon Photopolymerization of selected monomers in an inert silicon matrix

    Bichler, S., Mühlbacher, I., Feldbacher, S., Langer, G., Satzinger, V., Schmidt, V. & Kern, W., 2008.

    Research output: Contribution to conference › Poster › Research › peer-review

  65. Published

    Umformbare polymerbeschichtete Bleche - Polymerphysikalische Charakterisierung und Struktur/Eigenschafts-Beziehungen

    Buder-Stroißnigg, M., 2008

    Research output: Thesis › Doctoral Thesis

  66. Published

    Untersuchung des Tempereinflusses auf die Zugeigenschaften von gepressten E/P-Kraftzellstoff-Faservliesen

    Pilz, G. & Rausch-Schott, O., 2008

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  67. Published

    Untersuchungen zum abrasiven Verschleiß von niedrig- bzw. hoch legierten Kunststoff-Formenstählen mit einem verbesserten Verschleißmodell

    Weiermair, G., 2008

    Research output: Thesis › Diploma Thesis

  68. Published

    Untersuchungen zur Wärmeleitfähigkeit von Polypropylen mit mikroskaligen Füllstoffen bei hohen Drücken

    Kucher, C., 2008

    Research output: Thesis › Diploma Thesis

  69. Published

    UV assisted surface modification of polymer films using the photo-Fries reaction.

    Temmel, S., Höfler, T., Kern, W., Trimmel, G., Grießer, T. & Jakopic, G., 2008.

    Research output: Contribution to conference › Poster › Research › peer-review

  70. Published

    Verfahren zur Modifizierung von Kunststoffen sowie damit hergestellte Formkörper

    Kern, W. (Inventor) & Buchgraber, C. (Inventor), 2008, Patent No. A1571/2006

    Research output: Patent

  71. Published

    Zugversuch an einem Composite-Bauteil (IOR flange test)

    Pinter, G. & Lang, R., 2008

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  72. Published

    δ-phase characterization of superalloy Allvac 718 Plus™

    Sommitsch, C., Stotter, C., Leitner, H., Mitsche, S., Letofsky-Papst, I. & Stockinger, M., 2008, TMS2008 - 137th Annual Meeting and Exhibition Supplemental Proceedings: Materials Processing and Properties. p. 63-68 6 p. (TMS Annual Meeting; vol. 2).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  73. 2007
  74. Published

    Investigations of the Rheology and Reactivity of Extrudable Wood-Resin Compounds

    Braun, J., Duretek, I., Müller, U., Friesenbichler, W. & Endesfelder, A., 3 Apr 2007, In: Monatshefte für Chemie = Chemical monthly. 138.2007, p. 337-341 5 p.

    Research output: Contribution to journal › Article › Research › peer-review

  75. Published

    Simulation des spritzgießprozesses von mikrobauteilen

    Cramer, A., Michaeli, W., Friesenbichler, W. & Duretek, I., 1 Jan 2007, In: Zeitschrift Kunststofftechnik = Journal of plastics technology. 1

    Research output: Contribution to journal › Article › Research › peer-review

  76. Published

    3D-Oberflächenvermessung von strukturierten Aluminiumfolien

    Berger, G. & Lang, R., 2007

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  77. Published

    4-Bromobenzyl isocanate versus benzyl isocyanate- New film-forming electrolyte additives and overcharge protection additives for lithium ion batteries

    Kern, W. & Winter, M., 2007, In: Journal of power sources. 174, p. 637-642

    Research output: Contribution to journal › Article › Research › peer-review

  78. Published

    A340-500/-600 RTM CHF Subcomponent Tests

    Pinter, G. & Lang, R., 2007

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  79. Published

    Abhängigkeit des Exfolierungsgrades von Silikatschichten in einer Polymermatrix vom Compatibilizer - Nanoclay Mischverhältnis

    Laske, S., Kracalik, M., Gschweitl, M. & Langecker, G., 2007, 12 Problemseminar "Polymermischungen" Gefüllte und verstärkte Polymerblends - Nanoblends. p. 20-20

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  80. Published

    Abrasive/corresive wear on plastic mold steels, measured under practical processing conditions

    Friesenbichler, W., 2007.

    Research output: Contribution to conference › Poster › Research › peer-review

  81. Published

    Abrasive/corresive wear on plastic mold steels, measured under practical processing conditions

    Friesenbichler, W., Berger, G. & Perko, J., 2007, PPS-23 Program and Book of Abstracts. p. 176-176

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  82. Published

    Abrasive/corresive wear on plastic mold steels, measured under practical processing conditions: PPS-23 The Polymer Processing Society 23rd Annual Meeting

    Friesenbichler, W., Berger, G. & Perko, J., 2007

    Research output: Non-textual form › Web publication/site › Research

  83. Published

    Aging behavior of polymeric materials for solar thermal absorber applications

    Kahlen, S. & Wallner, G., 2007, Solar Energy and Human Settlement. p. 519-523

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  84. Published

    All Polymeric Flat-Plate Collector - Potential of Thermotropic Layers to Prevent Overheating

    Resch, K. & Wallner, G., 2007, Solar Energy and Human Settlement. p. 561-565

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  85. Published

    Analog triggered image acquisation for optical measurement under cyclic load conditions

    Vezer, S., Steinberger, R. & Major, Z., 2007.

    Research output: Contribution to conference › Poster › Research › peer-review

  86. Published

    Analog triggered image acquisation for optical measurment under cyclic load conditions

    Vezer, S., Steinberger, R. & Major, Z., 2007.

    Research output: Contribution to conference › Poster › Research › peer-review

  87. Published

    Analyse des Alterungszustandes von PP-Rohren

    Pinter, G. & Lang, R., 2007

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  88. Published

    Analyse eines Profils

    Wallner, G. & Lang, R., 2007

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  89. Published

    Analyse eines Spritzgussbauteiles

    Wallner, G. & Lang, R., 2007

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  90. Published

    Analyse von Tiefziehmaterialien

    Wallner, G. & Lang, R., 2007

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  91. Published

    Anwendung von neuronalen Netzen für die Materialdatengenerierung am Beispiel von Polyamid

    Fuchs, P., 2007, 79 p.

    Research output: Thesis › Diploma Thesis

  92. Published

    Application of full-field strain and temperature measurement and analysis to polymer testing

    Major, Z., Steinberger, R., Feichter, C., Jerabek, M. & Lang, R., 2007, Experimental Analysis of Nano and Engineering Materials and Structures. p. 473-474

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  93. Published

    A test concept for lifetime prediction of polyethylene pressure pipes

    Pinter, G., Lang, R. & Haager, M., 2007, In: Monatshefte für Chemie = Chemical monthly. 138, p. 347-355

    Research output: Contribution to journal › Article › Research › peer-review

  94. Published

    Aufbau und Inbetriebnahme einer Anlage zur Herstellung von exfolierten Nanocomposites

    Gschweitl, M., 2007

    Research output: Thesis › Diploma Thesis

  95. Published

    Aufheizen des Halbzeugs beim Thermoformen

    Fertschej, A., 2007, Fachtagung Thermoformen technische Bauteile - Vom Design zum Fertigteil. p. 1-26

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  96. Published

    Berechnungsmodell für Maddock- und Wendelscherteile in der Einschneckenplastifiziertechnologie

    Thiel, H., 2007, 97 p.

    Research output: Thesis › Diploma Thesis

  97. Published

    Bestimmung der Druckfestigkeit von CFK-Laminatwerkstoffen

    Pilz, G. & Lang, R., 2007

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  98. Published

    Bestimmung der Kriech- und Zugeigenschaften für einen PTFE-Dichtungswerkstoff

    Pilz, G. & Lang, R., 2007

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  99. Published

    Bestimmung der Längenausdehnung von Eisstockzwischenplatten aus PA6 GF40

    Pinter, G. & Lang, R., 2007

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  100. Published

    Bestimmung der mechanischen Eigenschaften eines faserverstärkten thermoplastischen Hochleistungswerkstoffes

    Pinter, G. & Lang, R., 2007

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  101. Published

    Bestimmung von ausgewählten mechanischen Eigenschaften eines faserverstärkten thermoplastischen Hochleistungswerkstoffes

    Pinter, G. & Lang, R., 2007

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  102. Published

    Bestimmung von GIC-Werten in Anlehnung an pr DIN EN 6033

    Pinter, G. & Lang, R., 2007

    Research output: Book/Report › Commissioned report › Transfer › peer-review

Previous 1...32 33 34 35 36 37 38 39 ...42 Next
View graph of relations

Contact information

Otto Glöckel-Straße 2, 8700 Leoben
  • Main phone number: +43 3842 402 2301