Department Polymer Engineering and Science

Organisational unit: Departments and Institutes

201 - 300 out of 4,192Page size: 100

Research output

  1. 2023
  2. Published

    Plasma Processing and Treatment of 2D Transition Metal Dichalcogenides: Tuning Properties and Defect Engineering

    Sovizi, S., Angizi, S., Alem, S., Goodarzi, R., Boyuk, M. R. R. T., Ghanbari, H., Szoszkiewicz, R., Simchi, A. & Kruse, P., 4 Dec 2023, In: Chemical reviews. 2023, 24, p. 13869–13951 83 p.

    Research output: Contribution to journal › Review article › peer-review

  3. Published

    A black-box optimization strategy for customizable global elastic deformation behavior of unit cell-based tri-anti-chiral metamaterials

    Thalhamer, A., Fleisch, M., Schuecker, C., Fuchs, P. F., Schlögl, S. & Berer, M., Dec 2023, In: Advances in Engineering Software. 186.2023, December, 19 p., 103553.

    Research output: Contribution to journal › Article › Research › peer-review

  4. Published

    Determination of creep crack growth kinetics of ABS via the C* approach at different temperatures

    Wainstein, J., Wiener, J., Arbeiter, F. & Frontini, P. M., Dec 2023, In: Results in Engineering. 20.2023, December, 9 p., 101481.

    Research output: Contribution to journal › Article › Research › peer-review

  5. Published

    Investigating the Aging Behavior of High-Density Polyethylene and Polyketone in a Liquid Organic Hydrogen Carrier

    Surisetty, J. S. S., Sharifian, M., Lucyshyn, T. & Holzer, C., 15 Nov 2023, In: Polymers. 15.2023, 22, 14 p., 4410.

    Research output: Contribution to journal › Article › Research › peer-review

  6. Published

    On-Demand Activation of Transesterification by Chemical Amplification in Dynamic Thiol-Ene Photopolymers

    Alabiso, W., Sölle, B., Reisinger, D., Guedes de la Cruz, G. D. C., Schmallegger, M., Grießer, T., Rossegger, E. & Schlögl, S., 6 Nov 2023, In: Angewandte Chemie - International Edition. 62.2023, 45, 6 p., e202311341.

    Research output: Contribution to journal › Article › Research › peer-review

  7. Published

    Novel test-rig for compaction behaviour analysis of textile reinforcements for improved RTM-process replication

    Bender, M. & Fauster, E., 1 Nov 2023, In: Advanced Manufacturing: Polymer and Composites Science. 9.2023, 1, 5 p., 2263828.

    Research output: Contribution to journal › Article › Research › peer-review

  8. Published

    Revolutionizing fiber-reinforced thermoplastic composite recycling : the LightCycle project's journey towards energy-efficient upcycling and quality material regeneration

    Krempl, N. & Shahroodi, Z., 1 Nov 2023, 60th Ilmenau Scientific Colloquium. p. 1-10 10 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  9. Published

    Bestimmung des pvT-Verhaltens für unterschiedliche MIM-Feedstocks

    Duretek, I., 24 Oct 2023, Leoben. 8 p.

    Research output: Book/Report › Commissioned report › Research

  10. Published

    Synthesis and characterization of bio-based transesterification catalysts for green 3D-printable dynamic photopolymers

    Sölle, B., Shaukat, U., Rossegger, E. & Schlögl, S., 19 Oct 2023, In: Polymer Chemistry. 44.2023, 14, p. 4994-5003 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  11. Published

    Impact of Multiple Reprocessing on Properties of Polyhydroxybutyrate and Polypropylene

    Main, P., Petersmann, S., Wild, N., Feuchter, M., Duretek, I., Edeleva, M., Ragaert, P., Cardon, L. & Lucyshyn, T., 18 Oct 2023, In: Polymers. 15.2023, 20, 24 p., 4126.

    Research output: Contribution to journal › Article › Research › peer-review

  12. Published

    Tension-after-impact (TAI) performance and 3D damage visualization of carbon-fiber epoxy composites with adhesively bonded patch repairs

    Röper, F., Sommacal, S., Compston, P., Tauchner, J., Wolfahrt, M. & Pinter, G. G., 15 Oct 2023, In: Composite structures. 322.2023, 15 October, 11 p., 117338.

    Research output: Contribution to journal › Article › Research › peer-review

  13. Published

    Material data determination for one ceramic CIM-feedstock for injection molding simulation using SIGMASOFT®

    Duretek, I., 12 Oct 2023, 15 p.

    Research output: Book/Report › Commissioned report › Research

  14. Published

    Material characterisation of industrial textile waste under consideration of various processing conditions

    Jenull, U., Duretek, I., Lucyshyn, T. & Holzer, C., 9 Oct 2023, Proceedings SARDINIA 2023. p. 1-5 5 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  15. E-pub ahead of print

    Investigating the impact of manufacturing conditions on crack growth rate in nitrile butadiene rubber for enhanced service life – Part 01

    Gehling, T., Kerschbaumer, R. C., Pinter, G. G., Fasching, M. A., Schwarz, T. & Schieppati, J., 7 Oct 2023, (E-pub ahead of print) In: Results in Engineering. 20.2023, December, 8 p., 101484.

    Research output: Contribution to journal › Article › Research › peer-review

  16. Published

    Redox cationic frontal polymerization: a new strategy towards fast and efficient curing of defect-free fiber reinforced polymer composites

    Malik, M. S., Wolfahrt, M. & Schlögl, S., 4 Oct 2023, In: RSC Advances. 13.2023, 41, p. 28993-29003 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  17. Published

    Crack penetration versus deflection in extrusion-based additive manufacturing – Impact of nozzle temperature and morphology

    Waly, C., Petersmann, S. & Arbeiter, F., Oct 2023, In: Theoretical and Applied Fracture Mechanics. 127.2023, October, 13 p., 104032.

    Research output: Contribution to journal › Article › Research › peer-review

  18. Published

    In Situ Observation of Micro-Patterned Elastomeric Surfaces: The Formation of the Area of Real Contact and the Influence on Its Friction and Deformation Behaviour

    Hausberger, A., Pecora, M., Favier, D., Rossegger, E., Tockner, M., Ules, T., Haselmann, M., Schlögl, S. & Gauthier, C., 29 Sept 2023, In: Materials. 16.2023, 19, 17 p., 6489.

    Research output: Contribution to journal › Article › Research › peer-review

  19. Published

    Controlling Curing Kinetics in Thiol-Ene Reactions with Light

    Höller, R., Müller, S. M., Schlögl, S. & Griesser, T., 21 Sept 2023.

    Research output: Contribution to conference › Poster › Research

  20. E-pub ahead of print

    Highly conductive RuO2 thin films from novel facile aqueous chemical solution deposition

    Angermann, M., Jakopic, G., Prietl, C., Griesser, T., Reichmann, K. & Deluca, M., 16 Sept 2023, (E-pub ahead of print) In: Journal of sol-gel science and technology. 108.2023, December, p. 575-587 13 p.

    Research output: Contribution to journal › Article › Research › peer-review

  21. Published

    Statistical-based optimization of fused filament fabrication parameters for short-carbon-fiber-reinforced poly-ether-ether-ketone considering multiple loading conditions

    de Carvalho, W. S., Marzemin, F., Belei, C., Petersmann, S., Arbeiter, F. & de Traglia Amancio-Filho, S., 15 Sept 2023, In: Polymer Testing. 128.2023, November, 13 p., 108207.

    Research output: Contribution to journal › Article › Research › peer-review

  22. Published

    Closing the loop of polypropylene and polystyrene food packaging

    Jahn, E., Fajtak, A., Archodoulaki, M. V., Bichler, L., Pinter, E. & Krempl, N., 13 Sept 2023, p. 1.

    Research output: Contribution to conference › Poster › Research › peer-review

  23. Published

    Influence of Melt Strength Enhancers on PHB Processing

    Main, P., Lucyshyn, T., Van de Ginste, L. & Cardon, L., 13 Sept 2023.

    Research output: Contribution to conference › Poster › Research › peer-review

  24. Published

    Fabrication of Amorphous Silicon-Carbon Hybrid Films using Single Source Precursors

    Sauermoser, A., Lainer, T., Bandl, C., Haas, M., Knoechl, A., Goni, F., Fischer, R., Fitzek, H., Dienstleder, M., Prietl, C., Kelterer, A. M., Bandl, C., Jakopic, G., Kothleitner, G. & Haas, M., 12 Sept 2023, In: Inorganic chemistry. 62.2023, 38, p. 15490-15501 12 p.

    Research output: Contribution to journal › Article › Research › peer-review

  25. Published

    Effect of LOHC on HDPE and POK under different temperature conditions

    Surisetty, J. S. S., Lucyshyn, T. (Editor) & Holzer, C., 7 Sept 2023.

    Research output: Contribution to conference › Poster › Research

  26. Published

    Influence of processing conditions of industrial textile waste on rheological and thermal material properties

    Jenull, U., Holzer, C. & Lucyshyn, T., 7 Sept 2023, 31st Leoben-Conference on Polymer Engineering and Science: Circular Thinking in Polymer Technology. Leoben, Vol. Volume 12. p. 1-12 12 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  27. Published

    Susmagpro

    Schuschnigg, S. & Kukla, C., 7 Sept 2023.

    Research output: Contribution to conference › Poster › Research

  28. Published

    The effect of coalescence and diffusion on the part generation in the ARBURG plastic freeforming

    Hentschel, L., Maurer, C., Gonzalez-Gutierrez, J., Kynast, F., Schäfer, U. & Holzer, C., 7 Sept 2023, p. 1-1. 1 p.

    Research output: Contribution to conference › Poster › Research

  29. Published

    The Effect of Post-industrial Recycled Glass Fiber Flakes on the Rheological Properties of Recycled Polypropylene

    Shahroodi, Z., Krempl, N. (Editor) & Holzer, C. (Co-editor), 7 Sept 2023.

    Research output: Contribution to conference › Poster › Research › peer-review

  30. Published

    Solution-Processable Cu3BiS3 Thin Films: Growth Process Insights and Increased Charge Generation Properties by Interface Modification

    Rath, T., Marin-Beloqui, J. M., Bai, X., Knall, A.-C., Sigl, M., Warchomicka, F., Grießer, T., Amenitsch, H. & Haque, S. A., 6 Sept 2023, In: ACS Applied Materials and Interfaces. 15.2023, 35, p. 41624-41633 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  31. Published

    UV-stabilization of linseed oil-based epoxy resin

    Schwaiger, M., Schedler, M. & Resch-Fauster, K., 4 Sept 2023.

    Research output: Contribution to conference › Poster › Research

  32. Published

    Debinding And Sintering Strategies For Fused Filament Fabrication Of Aluminium Alloys

    Poehle, G., Quadbeck, P., Riecker, S., Kukla, C., Momeni, V. & Schuschnigg, S., Sept 2023, Euro Powder Metallurgy 2023 Congress & Exhibition.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  33. Published

    Filament Development for Metallic Fused Filament Fabrication of Aluminium Alloys

    Kukla, C., Momeni, V., Poehle, G., Riecker, S. & Schuschnigg, S., Sept 2023, Euro Powder Metallurgy 2023 Congress & Exhibition.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  34. Published

    Smart Materials for Green(er) Cities, a Short Review

    Nicolay, P., Schlögl, S., Thaler, S. M., Humbert, C. & Filipitsch, B., 16 Aug 2023, In: Applied Sciences (Switzerland). 13.2023, 16, 19 p., 9289.

    Research output: Contribution to journal › Review article › peer-review

  35. E-pub ahead of print

    Ti40Zr10Cu36Pd14 bulk metallic glass as oral implant material

    Rezvan, A., Sharifikolouei, E., Soprunyuk, V., Schranz, W., Todt, J., Lassnig, A., Gammer, C., Sifferlinger, N. A., Asci, A., Okulov, I., Schlögl, S., Keckes, J., Najmi, Z., Cochis, A., Scalia, A. C., Rimondini, L., Sarac, B. & Eckert, J., 16 Aug 2023, (E-pub ahead of print) In: Materials and Design. 233.2023, 10 p., 112256.

    Research output: Contribution to journal › Article › Research › peer-review

  36. Published

    Peroxide-based crosslinking of solid silicone rubber: part II: The counter-intuitive influence of dicumylperoxide concentration on crosslink effectiveness and related network structure

    Azevedo, M., Monks, A.-M., Kerschbaumer, R., Schlögl, S., Saalwächter, K., Walluch, M., Consolati, G. & Holzer, C., 15 Aug 2023, In: Journal of applied polymer science. 140.2023, 31, 17 p., e54111.

    Research output: Contribution to journal › Article › Research › peer-review

  37. Published

    Determination of the material data for CIM-feedstock FAT-DS (SPT CA)

    Duretek, I., 14 Aug 2023, 13 p.

    Research output: Book/Report › Commissioned report › Research

  38. Published

    Degradation of PET – Quantitative estimation of changes in molar mass using mechanical and thermal characterization methods

    Oreski, G., Ottersböck, B., Barretta, C., Christöfl, P., Radl, S. & Pinter, G. G., Aug 2023, In: Polymer Testing. 125.2023, August, 8 p., 108130.

    Research output: Contribution to journal › Article › Research › peer-review

  39. Published

    Determination of the glass transition temperature of an epoxy prepreg by Near Infrared Spectroscopy

    Salzmann, M., Teuchtmann, M. & Schledjewski, R., Aug 2023, In: Polymer Testing. 125.2023, August, 8 p., 108111.

    Research output: Contribution to journal › Article › Research › peer-review

  40. Published

    Optimization and manufacture of polyetheretherketone patient specific cranial implants by material extrusion: A clinical perspective

    Smith, J. A., Petersmann, S., Arbeiter, F. & Schäfer, U., Aug 2023, In: Journal of the Mechanical Behavior of Biomedical Materials. 144.2023, August, 25 p., 105965.

    Research output: Contribution to journal › Review article › peer-review

  41. Published

    Parametric effect on inline width control for thermoplastic automated tape layup

    Yadav, N. & Schledjewski, R., Aug 2023.

    Research output: Contribution to conference › Paper

  42. Published

    Measurement of thermal conductivity and specific volume for four pharmaceutical formulations

    Duretek, I., 28 Jul 2023, 13 p.

    Research output: Book/Report › Commissioned report › Research

  43. E-pub ahead of print

    Tactile friction and perception of UV-curable coatings and their relation to physical surface parameters and contact mechanic simulation

    Ules, T., Grießer, M., Hausberger, A., Schipfer, C., Mansouri, M., Fuchs, P., Schlögl, S. & Gruber, D. P., 28 Jul 2023, (E-pub ahead of print) In: Journal of coatings technology and research. 20.2023, 6, p. 1803-1814 12 p.

    Research output: Contribution to journal › Article › Research › peer-review

  44. Published

    Inferring material properties from FRP processes via sim-to-real learning

    Stieber, S., Schröter, N., Fauster, E., Bender, M., Schiendorfer, A. & Reif, W., 27 Jul 2023, In: International Journal of Advanced Manufacturing Technology. 128.2023, September, p. 1517–1533 17 p.

    Research output: Contribution to journal › Article › Research › peer-review

  45. Published

    Enhancing High-Pressure Capillary Rheometer Viscosity Data Calculation with the Propagation of Uncertainties for Subsequent Cross-Williams, Landel, and Ferry (WLF) Parameter Fitting

    Hubmann, M., Schuschnigg, S., Duretek, I., Groten, J. & Holzer, C., 24 Jul 2023, In: Polymers. 15.2023, 14, 21 p., 3147.

    Research output: Contribution to journal › Article › Research › peer-review

  46. E-pub ahead of print

    Concepts towards bio-inspired multilayered polymer-composites

    Wiener, J., Arbeiter, F. & Pinter, G. G., 21 Jul 2023, (E-pub ahead of print) In: Procedia Structural Integrity. 2023, 47, p. 253-260 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  47. E-pub ahead of print

    Investigation of expandable fillers for reversible adhesive bonding in photovoltaic modules

    Wanghofer, F., Wolfberger, A., Oreski, G., Neumaier, L. & Schlögl, S., 20 Jul 2023, (E-pub ahead of print) In: International Journal of Adhesion and Adhesives. 126.2023, August, 10 p., 103454.

    Research output: Contribution to journal › Article › Research › peer-review

  48. E-pub ahead of print

    Review of in-process defect monitoring for automated tape laying

    Yadav, N. & Schledjewski, R., 20 Jul 2023, (E-pub ahead of print) In: Composites Part A: Applied Science and Manufacturing. 173.2023, Oktober, 16 p., 107654.

    Research output: Contribution to journal › Article › Research › peer-review

  49. Published

    Computational modelling of the separation of molten polymer blends by a centrifugal technique

    Medvid, V., Steiner, H., Irrenfried, C., Feuchter, M. & Brenn, G., 17 Jul 2023, In: Journal of polymer research. 30.2023, 8, 308.

    Research output: Contribution to journal › Article › Research › peer-review

  50. Published

    Personalization of Complex Vaginal Inserts of Ethylene Vinyl Acetate via 3D-Printing

    Eder, S., Kuchler, L., Katschnig, M., Brandl, B., Wolfgang, M., Koutsamanis, I., Hentschel, L., Arbeiter, F., Roblegg, E. & Spoerk, M., 13 Jul 2023, In: Advanced Materials Technologies. 8.2023, 17, 15 p., 2300237.

    Research output: Contribution to journal › Article › Research › peer-review

  51. Published

    Vitrimeric shape memory polymer-based fingertips for adaptive grasping

    Kashef Tabrizian, S., Alabiso, W., Shaukat, U., Terryn, S., Rossegger, E., Brancart, J., Legrand, J., Schlögl, S. & Vanderborght, B., 12 Jul 2023, In: Frontiers in robotics and AI. 10.2023, 1206579.

    Research output: Contribution to journal › Article › Research › peer-review

  52. Published

    Effects of Different Polypropylene (PP)-Backbones in Aluminium Feedstock for Fused Filament Fabrication (FFF)

    Momeni, V., Shahroodi, Z., Gonzalez-Gutierrez, J., Hentschel, L., Duretek, I., Schuschnigg, S., Kukla, C. & Holzer, C., 11 Jul 2023, In: Polymers. 15.2023, 4, 18 p., 3007.

    Research output: Contribution to journal › Article › Research › peer-review

  53. Published

    Study of a novel curved single lap joint concept with non-uniform adhesive thickness: Master thesis in Mechanical Engineering

    Pires, V. D. C., 5 Jul 2023

    Research output: Thesis › Doctoral Thesis

  54. Published

    Fatigue Behavior of Elastomeric Components: A Review of the Key Factors of Rubber Formulation, Manufacturing, and Service Conditions

    Gehling, T., Schieppati, J., Balasooriya, W., Kerschbaumer, R. C. & Pinter, G. G., 3 Jul 2023, In: Polymer reviews. 63.2023, 3, p. 763-804 42 p.

    Research output: Contribution to journal › Review article › peer-review

  55. Published

    Bioinspired fracture toughness enhancement of a fully bio-based epoxy resin

    Schwaiger, M., Waly, C., Huszar, M., Oreski, G., Feuchter, M., Arbeiter, F. & Resch-Fauster, K., Jul 2023, In: Polymer Testing. 124.2023, July, 10 p., 108098.

    Research output: Contribution to journal › Article › Research › peer-review

  56. Published

    Hydrogen Evolution Reaction on Ultra-Smooth Sputtered Nanocrystalline Ni Thin Films in Alkaline Media—From Intrinsic Activity to the Effects of Surface Oxidation

    Neumüller, D., Rafailović, L. D., Jovanović, A. Z., Skorodumova, N. V., Pašti, I. A., Lassnig, A., Grießer, T., Gammer, C. & Eckert, J., Jul 2023, In: Nanomaterials. 13.2023, 14, 18 p., 2085.

    Research output: Contribution to journal › Article › Research › peer-review

  57. E-pub ahead of print

    3D Printing of Covalent Adaptable Networks: Overview, Applications and Future Prospects

    Bijalwan, V., Rana, S., Singh, H. K., Yun, G. J., Jamil, M. & Schlögl, S., 30 Jun 2023, (E-pub ahead of print) In: Polymer reviews. 64.2024, 1, p. 36-79 44 p.

    Research output: Contribution to journal › Review article › peer-review

  58. Published

    Additive Printing of Thermally Cured Two-Component Epoxy: A Route to Mesoscale Structuring for Improved Ductility

    Krawczyk, K., Wheeldon, A., Kamble, M., Popovic, K., Patter, P., Postl, M., Belegratis, M., Sieberer, M., Bandl, C., Kern, W., Constantinescu, D. M., Baciu, F., Stochioiu, C., Apostol, D. A. & Picu, C. R., 30 Jun 2023, In: ACS applied polymer materials. 5.2023, 7, p. 4859-4867 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  59. Published

    Surface-Initiated Polymerizations Mediated by Novel Germanium-Based Photoinitiators

    Müller, M., Drusgala, M., Fischer, R. C., Torvisco, A., Kern, W., Haas, M. & Bandl, C., 23 Jun 2023, In: ACS Applied Materials and Interfaces. 15.2023, 26, p. 31836-31848 13 p.

    Research output: Contribution to journal › Article › Research › peer-review

  60. E-pub ahead of print

    Effect of recycled material on failure by slow crack growth in multi-layer polyethylene pipes

    Trávníček, L., Poduška, J., Messiha, M., Arbeiter, F., Pinter, G. G., Náhlík, L. & Hutař, P., 14 Jun 2023, (E-pub ahead of print) In: Engineering Fracture Mechanics. 289.2023, 1 September, 18 p., 109423.

    Research output: Contribution to journal › Article › Research › peer-review

  61. E-pub ahead of print

    Digital light processing 3D printing of dynamic magneto-responsive thiol-acrylate composites

    Cazin, I., Rossegger, E., Roppolo, I., Sangermano, M., Granitzer, P., Rumpf, K. & Schlögl, S., 9 Jun 2023, (E-pub ahead of print) In: RSC Advances. 13.2023, 26, p. 17536-17544 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  62. Published

    Spatially resolved photoactivation of dynamic exchange reactions in 3D-printed thiol-ene vitrimers

    Reisinger, D., Hellmayr, A., Paris, M., Haas, M., Grießer, T. & Schlögl, S., 7 Jun 2023, In: Polymer Chemistry. 14.2023, 26, p. 3082-3090 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  63. Published

    Identifying active and degraded phenolic antioxidants in aged PE with IR-microscopy

    Bredács, M., Kanatschnig, E. E., Frank, A., Oreski, G., Pinter, G. G. & Gergely, S., Jun 2023, In: Polymer Degradation and Stability. 212.2023, June, 13 p., 110345.

    Research output: Contribution to journal › Article › Research › peer-review

  64. Published

    The effect of residual polyethylene on mechanical and rheological properties of recycled Polypropylene

    Shahroodi, Z., 25 May 2023, p. 1. 1 p.

    Research output: Contribution to conference › Poster › Research › peer-review

  65. Published

    Wear phenomenon in injection molding

    Zidar, D., Friesenbichler, W. & Blutmager, A., 23 May 2023, In: AIP Conference Proceedings. 2607.2023, 1, 6 p., 040003.

    Research output: Contribution to journal › Article › Research › peer-review

  66. Published

    Amino Acid-Based Polyphosphorodiamidates with Hydrolytically Labile Bonds for Degradation-Tuned Photopolymers

    Haudum, S., Lenhart, S., Müller, S. M., Tupe, D., Naderer, C., Dehne, T., Sittinger, M., Major, Z., Grießer, T., Brüggemann, O., Jacak, J. & Teasdale, I., 9 May 2023, In: ACS Macro Letters. 12.2023, 6, p. 673-678 6 p.

    Research output: Contribution to journal › Article › Research › peer-review

  67. Published

    The effect of photolatent catalysts on the exchange kinetics of dual-wavelength 3D printable and photopatternable thiol-click vitrimers

    Rossegger, E., Shaukat, U., Moazzen, K., Fleisch, M., Berer, M. & Schlögl, S., 2 May 2023, In: Polymer Chemistry. 14.2023, 21, p. 2640-2651 12 p.

    Research output: Contribution to journal › Article › Research › peer-review

  68. Published

    Pack2theLoop – Gemeinsam zum geschlossenen Kreislauf für Polyolefin Verpackungen

    Jahn, E., Fajtak, A., Bichler, L., Schlossnikl, J., Archodoulaki, M. V., Pinter, E., Krempl, N. & Eder, A., 1 May 2023, In: Pack & Log – die Fachzeitschrift für Verpackung & Intralogistik. 2023, 05, p. 12-13 2 p.

    Research output: Contribution to journal › Article › Research

  69. Published

    Current challenges in NdFeB permanent magnets manufacturing by Powder Injection Molding (PIM): A review

    Crozier-Bioud, T., Momeni, V., Gonzalez-Gutierrez, J., Kukla, C., Luca, S. & Rolere, S., May 2023, In: Materials today. Physics. 34.2023, May, 13 p., 101082.

    Research output: Contribution to journal › Review article › peer-review

  70. Published

    Resin avatar for Industry 4.0

    Lira, C., Etchells, M., Wolfahrt, M., Fauster, E., Daforno, R. & Koorevaar, A., May 2023.

    Research output: Contribution to conference › Abstract › peer-review

  71. Published

    Resin avatar for Industry 4.0

    Lira, C., Etchells, M., Wolfahrt, M., Fauster, E., Daforno, R. & Koorevaar, A., May 2023.

    Research output: Contribution to conference › Presentation › Research

  72. Published

    X-ray Photoelectron spectroscopy (XPS) – A powerful surface characterization technique

    Bandl, C., May 2023, BOOK OF ABSTRACTS - Junganalytiker*innenforum 2023 / Young analytical scientist’s forum 2023.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  73. E-pub ahead of print

    Evaluation of combinatorial algorithms for optimizing highly nonlinear structural problems

    Rettl, M., Pletz, M. & Schuecker, C., 28 Apr 2023, (E-pub ahead of print) In: Materials and Design. 230.2023, June, 15 p., 111958.

    Research output: Contribution to journal › Article › Research › peer-review

  74. Published

    Multifunctional Ti3AlC2-Based Composites via Fused Filament Fabrication and 3D Printing Technology

    Liu, D., Hentschel, L., Lin, G., Kukla, C., Schuschnigg, S., Ma, N., Wallis, C., Momeni, V., Kitzmantel, M. & Sui, G., 25 Apr 2023, In: Journal of Materials Engineering and Performance. 32.2023, 20, p. 9174-9181 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  75. E-pub ahead of print

    Crosslinking of XNBR latex with multifunctional epoxides: An energy-efficient curing strategy for the fabrication of accelerator-free rubber gloves

    Grabmayer, T., Manhart, J. C., Kaiser, S., Schaller, R., Holzner, A. & Schlögl, S., 19 Apr 2023, (E-pub ahead of print) In: Journal of applied polymer science. 140.2023, 25, 12 p., e53973.

    Research output: Contribution to journal › Article › Research › peer-review

  76. Published

    Parameter Study on Force Curves of Assembled Electronic Components on Foils during Injection Overmolding Using Simulation

    Hubmann, M., Bakr, M., Groten, J., Pletz, M., Vanfleteren, J., Bossuyt, F., Madadnia, B. & Stadlober, B., 19 Apr 2023, In: Micromachines. 14.2023, 4, 15 p., 876.

    Research output: Contribution to journal › Article › Research › peer-review

  77. Published

    RTMsim - A Julia module for filling simulations in Resin Transfer Moulding with the Finite Area Method

    Obertscheider, C. & Fauster, E., 15 Apr 2023, In: The journal of open source software. 8.2023, 8 p., 4763.

    Research output: Contribution to journal › Article › Research › peer-review

  78. Published

    Surface Functionalization of (Pyrolytic) Carbon: An Overview

    Pustahija, L. & Kern, W., 10 Apr 2023, In: C – journal of carbon research. 9.2023, 2, 35 p., 38.

    Research output: Contribution to journal › Article › Research › peer-review

  79. Published

    Determination of Material Data for one PA66-GF30 (Badamid A70 GF30 HH E) for injection moulding simulation

    Duretek, I., 4 Apr 2023, 19 p.

    Research output: Book/Report › Commissioned report › Research

  80. Published

    Comparing crack density and dissipated energy as measures for off-axis damage in composite laminates

    Drvoderic, M., Gfrerrer, M., Wiener, J., Pinter, G. G., Pletz, M. & Schuecker, C., Apr 2023, In: International Journal of Fatigue. 169.2023, April, 10 p., 107486.

    Research output: Contribution to journal › Article › Research › peer-review

  81. Published

    Exploring Aromatic S-Thioformates as Photoinitiators

    Rieger, P., Pueschmann, S., Haas, M., Schmallegger, M., Guedes de la Cruz, G. D. C. & Grießer, T., Apr 2023, In: Polymers. 15.2023, 7, 8 p., 1647.

    Research output: Contribution to journal › Article › Research › peer-review

  82. Published

    Stretch-Steering of Aligned Discontinuous Fiber Tapes on Highly Curved Paths using Automated Fiber Placement

    Legenstein, A., Füssel, L., Tierney, J., Gillespie Jr., J. W., Heider, D. & Cender, T., Apr 2023, p. 992-1005. 13 p.

    Research output: Contribution to conference › Paper › peer-review

  83. E-pub ahead of print

    In-line and off-line NDT defect monitoring for thermoplastic automated tape layup

    Yadav, N., Oswald-Tranta, B., Gürocak, M., Galic, A., Adam, R. & Schledjewski, R., 31 Mar 2023, (E-pub ahead of print) In: NDT and E international. 137.2023, July, 8 p., 102839.

    Research output: Contribution to journal › Article › Research › peer-review

  84. Published

    The effect of HPAM polymer for enhanced oil recovery on corrosion behaviour of a carbon steel and interaction with the inhibitor under simulated brine conditions

    Moshtaghi, M., Eskinja, M., Mori, G. K., Grießer, T., Safyari, M. & Cole, I., 22 Mar 2023, In: Corrosion science. 217.2023, June, 20 p., 111118.

    Research output: Contribution to journal › Article › Research › peer-review

  85. Published

    Influence of Injection Molding Parameters on the Peel Strength between Plasma-Treated Fluoropolymer Films and Polycarbonate

    Hubmann, M., Groten, J., Pletz, M., Grießer, T., Plevová, K., Nemitz, W. & Stadlober, B., 21 Mar 2023, In: Polymers. 15.2023, 6, 19 p., 1568.

    Research output: Contribution to journal › Article › Research › peer-review

  86. Published

    Tailoring the optical and UV reflectivity of CFRP-epoxy composites: Approaches and selected results

    Haiden, L., Brunner, A. J., Pansare, A. V., Feuchter, M. & Pinter, G. G., 20 Mar 2023, In: Science and Engineering of Composite Materials. 30.2023, 1, 12 p., 20220175.

    Research output: Contribution to journal › Article › Research › peer-review

  87. E-pub ahead of print

    Chiral-based mechanical metamaterial with tunable normal-strain shear coupling effect

    Fleisch, M., Thalhamer, A., Meier, G., Huber, P., Fuchs, P., Pinter, G. G., Schlögl, S. & Berer, M., 15 Mar 2023, (E-pub ahead of print) In: Engineering Structures. 284.2023, 1 June, 15 p., 115952.

    Research output: Contribution to journal › Article › Research › peer-review

  88. Published

    Investigation of the Mechanical Properties of Sandwich Composite Panels Made with Recyclates and Flax Fiber/Bio-Based Epoxy Processed by Liquid Composite Molding

    Ravindran, B., Feuchter, M. & Schledjewski, R., 15 Mar 2023, In: Journal of composites science. 7.2023, 3, 16 p., 122.

    Research output: Contribution to journal › Article › Research › peer-review

  89. Published

    Thermally Latent Bases in Dynamic Covalent Polymer Networks and their Emerging Applications

    Reisinger, D., Kriehuber, M. U., Bender, M., Bautista-Anguís, D., Rieger, B. & Schlögl, S., 14 Mar 2023, In: Advanced materials. 35.2023, 24, 27 p., 2300830.

    Research output: Contribution to journal › Article › Research › peer-review

  90. Published

    Effects of simulated body fluid on the mechanical properties of polycarbonate polyurethane produced via material jetting

    Petersmann, S., Huemer, M., Hentschel, L. & Arbeiter, F., 6 Mar 2023, In: Polymer Testing. 120.2023, March, 10 p., 107977.

    Research output: Contribution to journal › Article › Research › peer-review

  91. E-pub ahead of print

    Soft dielectric actuator produced by multi-material fused filament fabrication 3D printing

    Raguž, I., Berer, M., Fleisch, M., Holzer, C., Brancart, J., Vanderborght, B. & Schlögl, S., 6 Mar 2023, (E-pub ahead of print) In: Polymers for Advanced Technologies. 34.2023, 6, p. 1967-1978 12 p.

    Research output: Contribution to journal › Article › Research › peer-review

  92. Published

    Sustainable Bio-Based UV-Cured Epoxy Vitrimer from Castor Oil

    Bergoglio, M., Reisinger, D., Schlögl, S., Grießer, T. & Sangermano, M., 18 Feb 2023, In: Polymers. 15.2023, 4, 12 p., 1024.

    Research output: Contribution to journal › Article › Research › peer-review

  93. Published

    Accelerated Thermo-Catalytic Degradation of Perfluoropolyether (PFPE) Lubricants for Space Applications

    Gleirscher, M., Wolfberger, A., Schlögl, S., Hołyńska, M. & Hausberger, A., 14 Feb 2023, In: Lubricants. 11.2023, 2, 15 p., 81.

    Research output: Contribution to journal › Article › Research › peer-review

  94. E-pub ahead of print

    Implementation of thermo-responsive polymer coatings for an early warning against critical temperature states of thermo-sensitive electronic devices with metal oxide (MOx) gas sensors

    Bautista-Anguís, D., Wolfberger, A., Rabe, M., Tomaszczyk, S. & Schlögl, S., 14 Feb 2023, (E-pub ahead of print) In: Progress in organic coatings. 178.2023, May, 11 p., 107444.

    Research output: Contribution to journal › Article › Research › peer-review

  95. Published

    Corrigendum to “Personalised urethra pessaries prepared by material extrusion-based additive manufacturing” [Int. J. Pharm. 608 (2021) 121112] (International Journal of Pharmaceutics (2021) 608, (S0378517321009182), (10.1016/j.ijpharm.2021.121112))

    Spörk, M., Arbeiter, F., Koutsamanis, I., Cajner, H., Katschnig, M. & Eder, S., 25 Jan 2023, In: International Journal of Pharmaceutics. 631.2023, 25 January, 1 p., 122548.

    Research output: Contribution to journal › Comment/debate › peer-review

  96. Published

    A pyrrole–carbazole photoinitiator for radical and cationic visible light LED photopolymerization

    Li, Y., Shaukat, U., Schlögl, S., Xue, T., Li, J., Nie, J. & Zhu, X., 3 Jan 2023, In: European polymer journal. 182.2023, 3 January, 7 p., 111700.

    Research output: Contribution to journal › Article › Research › peer-review

  97. Published

    Material extrusion-based additive manufacturing of polyetheretherketone cranial implants: Mechanical performance and print quality

    Petersmann, S., Smith, J. A., Schäfer, U. & Arbeiter, F., Jan 2023, In: Journal of Materials Research and Technology. 22.2023, January-February, p. 642-657 16 p.

    Research output: Contribution to journal › Article › Research › peer-review

  98. Published

    Research Progress on Low-Pressure Powder Injection Molding

    Momeni, V., Hufnagl, M., Shahroodi, Z., Gonzalez-Gutierrez, J., Schuschnigg, S., Kukla, C. & Holzer, C., Jan 2023, In: Materials. 16.2023, 1, 44 p., 379.

    Research output: Contribution to journal › Review article › peer-review

  99. Published

    Wavelength Selective Multi-Material 3D Printing of Soft Active Devices Using Orthogonal Photoreactions

    Rossegger, E., Strasser, J., Höller, R., Fleisch, M., Berer, M. & Schlögl, S., Jan 2023, In: Macromolecular rapid communications. 44.2023, 2, 9 p., 2200586.

    Research output: Contribution to journal › Article › Research › peer-review

  100. Published

    3D Printed Device for Avoiding Hand Contact with Shared Surfaces: The Handgenic

    Pais, A. I., Ferreira, C., Pires, V., Silva, V., Alves, J. L., Bastos, J. A. & Belinha, J., 2023, Proceedings of the 10th Congress of the Portuguese Society of Biomechanics, CNB 2023. Martins Amaro, A., Roseiro, L., Messias, A. L., Gomes, B., Almeida, H., António Castro, M., António Castro, M., Neto, M. A., de Fátima Paulino, M. & Maranha, V. (eds.). p. 3-15 13 p. (Lecture Notes in Bioengineering).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  101. Published

    Advancing Industry 4.0: AI-Enhanced In-Line MIMO Quality Control for Piano-Black Curved Plastic Injection Molded Parts with OPC UA Integration

    Saeidi Aminabadi, S., 2023

    Research output: Thesis › Doctoral Thesis

Previous 1 2 3 4 5 6 7 8 ...42 Next
View graph of relations

Contact information

Otto Glöckel-Straße 2, 8700 Leoben
  • Main phone number: +43 3842 402 2301