Department Polymer Engineering and Science

Organisational unit: Departments and Institutes

1801 - 1900 out of 4,192Page size: 100

Research output

  1. 2016
  2. Published

    Residual stress distribution in extruded polyolefin pipes

    Hutař, P., Poduska, J., Kučera, J., Nezbedová, E., Frank, A., Sadilek, J. & Pinter, G., 2016, Proceedings Plastics Pipes XVIII. 8 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  3. Published

    Residual stress in polyethylene pipes

    Poduska, J., Hutař, P., Kučera, J., Frank, A., Sadilek, J., Pinter, G. & Náhlík, L., 2016, In: Polymer Testing. 54, p. 288 295 p.

    Research output: Contribution to journal › Article › Research › peer-review

  4. Published

    Rheometry of polymer melts using processing machines

    Friesenbichler, W., Neunhäuserer, A. & Duretek, I., 2016, In: Korea-Australia Rheology Journal. 28, 3, p. 167-174 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  5. Published

    Rheometry of Polymer Melt using Processing Machines

    Friesenbichler, W., Neunhäuserer, A. & Duretek, I., 2016, The 16th Internaional Symposium on Applied Rheology (ISAR). Korea, p. 2-5 4 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  6. Published

    Significance of epoxy network properties for the toughening effect of flaky and fullerene-like WS2 nanoparticles

    Haba, D., Barbezat, M., Ayalur-Karunakaran, S., Schlögl, S., Brunner, A. & Pinter, G., 2016, In: Journal of polymer science : B, Polymer physics. 54, 17, p. 1738 1747 p.

    Research output: Contribution to journal › Article › Research › peer-review

  7. Published

    Strength and damage tolerance of composite–composite joints with steel and titanium through the thickness reinforcements

    Stelzer, S., Ucsnik, S. & Pinter, G., 2016, In: Composites Part A: Applied Science and Manufacturing. 88, p. 39–47

    Research output: Contribution to journal › Article › Research › peer-review

  8. Published

    Structure of Polypropylene Macromolecules in the Vicinity of Fe2O3 Surface

    Gooneie, A., Schuschnigg, S. & Holzer, C., 2016.

    Research output: Contribution to conference › Poster › Research

  9. Published

    Structure of Polypropylene Macromolecules in the Vicinity of Fe2O3 Surface

    Gooneie, A., Schuschnigg, S. & Holzer, C., 2016, p. 189. 190 p.

    Research output: Contribution to conference › Abstract

  10. Published

    Study of the formation of globule-like surface microstructures on polyacrylamide nano-films synthesized via electro-polymerization process

    Shahsavan, F., Gooneie, A., Shoja Chaykar, A., Shahkaram, M. & Eslami, H., 2016, In: AIP Conference Proceedings. 110002.

    Research output: Contribution to journal › Article › Research › peer-review

  11. Published

    Surface Functionalization of Natural Rubber by UV‐Induced Thiol‐ene Chemistry

    Manhart, J. C., Kramer, R., Schaller, R., Holzner, A., Kern, W. & Schlögl, S., 2016, In: Macromolecular Symposia. 2016, 365

    Research output: Contribution to journal › Article › Research › peer-review

  12. Published

    The effect of residual stress on the process of crack growth rate determination in polymer pipes

    Poduska, J., Hutař, P., Kucera, J., Sadilek, J., Frank, A., Pinter, G. & Náhlík, L., 2016, Solid State Phenomena . 258 ed. p. 174 177 p. (Solid State Phenomena).

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  13. Published

    Thermosets from Renewable Resources - Fundamentals, Preparation, and Properties

    Mahendran, A. R. & Aust, N., 2016, Advances in Polymer Materials and Technology. Srinivasan, A. & Bandyopadhyay, S. (eds.). p. 553-571

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  14. Published

    Thiol‐Ene versus Binary Thiol–Acrylate Chemistry: Material Properties and Network Characteristics of Photopolymers

    Sahin, M., Ayalur Karunakaran, S., Manhart, J. C., Wolfahrt, M., Kern, W. & Schlögl, S., 2016, In: Advanced engineering materials. 2016, 19, 19.

    Research output: Contribution to journal › Article › Research › peer-review

  15. Published

    Thiol-Yne Derived Photopolymers from Low-Cytotoxic 3D-Printing Resins

    Hartmann, D., Oesterreicher, A., Edler, M., Moser, A., Pinter, G. & Grießer, T., 2016.

    Research output: Contribution to conference › Presentation › Research › peer-review

  16. Published

    Thiol-yne Derived Resins for 3D Printing of Biocompatible Structures

    Oesterreicher, A., 2016

    Research output: Thesis › Doctoral Thesis

  17. Published

    Tough and degradable photopolymers derived from alkyne monomers for 3D printing of biomedical materials

    Oesterreicher, A., Wiener, J., Roth, M., Moser, A., Gmeiner , R., Edler, M., Pinter, G. & Grießer, T., 2016, In: Polymer Chemistry. 7, p. 5169-5180

    Research output: Contribution to journal › Article › Research › peer-review

  18. Published

    Toughening of epoxy with WS2 nanoparticles

    Haba, D., 2016

    Research output: Thesis › Doctoral Thesis

  19. Published

    Untersuchung der mechanischen Rezyklierbarkeit von technischen Biokunststoffen

    Blees, E. C., 2016

    Research output: Thesis › Master's Thesis

  20. Published

    Untersuchung des Temperatur- und Strömungsverhaltens beim Kautschukspritzgießen mithilfe eines neu entwickelten Schneckenprüfstands

    Graninger, G., 2016

    Research output: Thesis › Master's Thesis

  21. Published

    Untersuchung und Optimierung der Barriereeigenschaften von Polyolefinen gegen die Permeation von kurzkettigen Kohlenwasserstoffen

    Berger, K., 2016

    Research output: Thesis › Doctoral Thesis

  22. Published

    Vacuum infusion composite manufacturing using integrated carbon nanotubes sensor

    Lloret Pertegas, S., Matyas, J., Slobodian, P. & Schledjewski, R., 2016.

    Research output: Contribution to conference › Paper

  23. Published

    Vacuum infusion composite manufacturing using integrated carbon nanotubes sensor

    Lloret Pertegas, S., 2016.

    Research output: Contribution to conference › Poster › Research

  24. Published

    Verbesserung von Wärmeleitfähigkeit und mechanischer Eigenschaften von HDPE durch mikro- und nanoskalige Füllstoffe

    Stieger, S., 2016

    Research output: Thesis › Master's Thesis

  25. Published

    Versatz zur Herstellung eines Grünkörpers zur Herstellung eines feuerfesten kohlenstoffgebundenen Erzeugnisses, Verfahren zur Herstellung eines solchen Grünkörpers sowie ein hierdurch hergestellter Grünkörper

    Puchleitner, R. (Inventor), Kern, W. (Inventor), Rieß, G. (Inventor), Deutsch, G. (Inventor), Heid, S. (Inventor), Michelitsch, A. (Inventor) & Köhler, J. (Inventor), 2016, Patent No. EP 3 093 305 A1

    Research output: Patent

  26. Published

    Vinylcarbonates as low-toxic monomers for digital ink-jet inks: Promising alternatives to acrylate based systems

    Mostegel, F., Roth, M., Gassner, M., Oesterreicher, A., Piock, R., Edler, M. & Grießer, T., 2016, In: Progress in organic coatings.

    Research output: Contribution to journal › Article › Research › peer-review

  27. Published

    Vorrichtung und Verfahren zum Faserspritzgießen von Spritzgießteilen

    Petschnig, A. (Inventor), Rojach, M. (Inventor), Friesenbichler, W. (Inventor), Bodor, C. (Inventor), Bevc, F. (Inventor), Berger, G. (Inventor) & Schadler, W. (Inventor), 2016, 3 Dec 2015, Priority No. WO2015181296A1

    Research output: Patent

  28. Published

    Vorrichtung zum elektrischen Verbinden von Komponenten mit einem rissminimierenden Haftvermittler und Herstellungsverfahren dafür

    Nothdurft, P. (Inventor), Feldbacher, S. (Inventor), Kern, W. (Inventor) & Steinberger, A. (Inventor), 2016

    Research output: Patent

  29. Published

    X-ray Curing of Organic Bonded High Temperature Resistant Ceramics

    Puchleitner, R., 2016

    Research output: Thesis › Doctoral Thesis

  30. 2015
  31. Published

    On crack propagation in the welded polyolefin pipes with and without the presence of weld beads

    Mikula, J., Hutař, P., Nezbedová, E., Lach, R., Arbeiter, F., Ševčík, M., Pinter, G., Grellmann, W. & Náhlík, L., 15 Dec 2015, In: Materials & design. 87, p. 95-104 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  32. Published

    From Photosensitive Polymers for Advanced Applications to High-performance Photopolymers

    Grießer, T., 10 Dec 2015.

    Research output: Contribution to conference › Presentation › Research

  33. Published

    DEVICE AND METHOD FOR FIBRE INJECTION MOULDING OF INJECTION MOULDED PARTS

    Berger-Weber, G. (Inventor), Bevc, F. (Inventor), Bodor, C. (Inventor), Friesenbichler, W. (Inventor), Petschnig, A. (Inventor) & Schadler, W. (Inventor), 3 Dec 2015, IPC No. B29C45/00, Patent No. WO2015181296

    Research output: Patent

  34. Published

    Vorrichtung und Verfahren zum Faserspritzgießen von Spritzgussteilen

    Friesenbichler, W. (Inventor), Bodor, C. (Inventor), Schadler, W. (Inventor), Bevc, F. (Inventor) & Petschnig, A. (Inventor), 3 Dec 2015, IPC No. B29C45/00, B29C45/33, Patent No. DE 10 2014 210 295 A8

    Research output: Patent

  35. Published

    Vorrichtung und Verfahren zum Faserspritzgießen von Spritzgussteilen

    Petschnig, A. (Inventor), Friesenbichler, W. (Inventor), Bodor, C. (Inventor), Bevc, F. (Inventor), Berger-Weber, G. (Inventor) & Schadler, W. (Inventor), 3 Dec 2015, IPC No. B29C45/00, B29C45/33, Patent No. DE102014210296 A1

    Research output: Patent

  36. Published

    New strategies towards reversible and mendable epoxy based materials employing [4πs + 4πs] photocycloaddition and thermal cycloreversion of pendant anthracene groups

    Radl, S.a, Kreimer, M.a, Griesser, T.bc, Oesterreicher, A.c, Moser, A.d, Kern, W.ab, Schlögl, S.a, 2 Dec 2015, In: Polymer. Volume 80, p. Pages 76-87

    Research output: Contribution to journal › Article › Research › peer-review

  37. Published

    Enhancing the temperature stability of PLA by compounding strategies

    Laske, S., Ziegler, W., Kainer, M., Wuerfel, J. & Holzer, C., 1 Dec 2015, In: Polymer engineering and science. 55, 12, p. 2849-2858 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  38. Published

    Multidimensionally photopatterned substrates on the basis of monosaccharide derivatives, their oligomers and their polymers and a method of production thereof

    Stana, K. K. (Inventor), Spirk, S. (Inventor), Griesser, T. (Inventor), Kern, W. (Inventor), Kargl, R. (Inventor) & Ribitsch, V. (Inventor), 30 Nov 2015, IPC No. G03F 7/ 00 C I, Patent No. SI2784586 (T1), 30 Nov 2015, Priority date 27 Mar 2013, Priority No. EP20130002404

    Research output: Patent

  39. Published

    Study of rheological behaviour of stainless steel feedstock taking into account the thermal effects

    Kukla, C., Duretek, I., Schuschnigg, S., Gonzalez-Gutierrez, J., Gooneie, A. & Holzer, C., 30 Nov 2015, IBEREO’15 IBERIAN RHEOLOGY CONFERENCE. Rasteiro, M. G. (ed.). Coimbra, Portugal: Universidad Nacional de Colombia, p. 50-53 4 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  40. Published

    Fließverhalten hochgefüllter Kunststoffe

    Duretek, I., 26 Nov 2015, 24. Leobener Kunststoff-Kolloquium. Leoben, p. 57-74

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  41. Published

    Reibungsreduktion bei der Entformung von PA 6. Vorhersage durch Grenzflächenspannung und Verifikation durch praxisnahe Reibwertmessungen

    Berger, G., 26 Nov 2015, p. 161-177.

    Research output: Contribution to conference › Presentation › Research › peer-review

  42. Published

    Apparatus for measuring friction inside granular materials— Granular friction analyzer

    Bek, M., Gonzalez-Gutierrez, J., Moreno Lopez, J. A., Bregant, D. & Emri, I., 24 Nov 2015, In: Powder technology : an international journal on the science and technology of wet and dry particulate systems. 288, 2016, p. 255-265 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  43. Published

    Verfahren zur Herstellung eines epoxidbasierten Duromers und damit hergestelltes Duromer

    Griesser, T. T. (Inventor), Kern, W. M. T. (Inventor), Radl, S. (Inventor) & Schlögl, S. T. (Inventor), 15 Nov 2015, IPC No. C08G 59/ 40 A I, Patent No. AT515711, Priority date 23 Apr 2014, Priority No. AT20140050295

    Research output: Patent

  44. E-pub ahead of print

    Compaction behavior of continuous carbon fiber tows: an experimental analysis

    Kastanis, D., Steiner, H., Fauster, E. & Schledjewski, R., 12 Nov 2015, (E-pub ahead of print) In: Advanced Manufacturing: Polymer and Composites Science. 1.2015, 3, p. 169-174 6 p.

    Research output: Contribution to journal › Article › Research › peer-review

  45. Published

    Methoden zur Bestimmung des Vernetzungsgrads an Kautschukformteilen

    Friesenbichler, W. & Fasching, M., 5 Nov 2015.

    Research output: Contribution to conference › Presentation › Research › peer-review

  46. Published

    Methoden zur Bestimmung des Vernetzungsgrads an Kautschukformteilen

    Friesenbichler, W. & Fasching, M., 5 Nov 2015, Proceedings Rubber meets Science. 5 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  47. Published

    Potentiale der Schlitzdüsenrheometrie für die rheologische Charakterisierung von Kunststoffschmelzen und -compounds

    Friesenbichler, W., Nov 2015, 24. Leobener Kunststoff-Kolloquium: Festkolloquium Kunststoffverarbeitung GRL 75. Leoben, Vol. 24. p. 37-56

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  48. Published

    Characterization of the aging behaviour of various polyamide materials - part II

    Pilz, G. & Pinter, G., 30 Oct 2015

    Research output: Book/Report › Other report › Transfer

  49. Published

    Accurate, Reproducible and Robust In-Plane Permeability Characterization with a Low-Budget Test Rig: A Challenge or Straightforward?

    Grössing, H., Fauster, E. & Schledjewski, R., 29 Oct 2015, SAMPE CAMX, Dallas, Tx, USA, 26.-29.10.2015.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  50. Published

    Mechanical testing and fracture analyses of miniaturized ZnO-based multilayer components

    Macurova, K., Gruber, M., Pletz, M., Supancic, P., Danzer, R., Aldrian, F. & Bermejo, R., 26 Oct 2015

    Research output: Other contribution › Research

  51. Published

    RESIN COMPOSITION SUITABLE FOR PRINTING AND PRINTING METHOD UTILIZING THE SAME

    Oesterreicher, A. (Inventor), Griesser, T. (Inventor), Edler, M. (Inventor), Mostegel, F. (Inventor), Gassner, M. (Inventor), Roth, M. (Inventor) & Billiani, J. (Inventor), 22 Oct 2015, IPC No. C08L 101/ 16 A I, Patent No. CA2979581, 22 Oct 2015, Priority date 14 Apr 2014, Priority No. EP2015058082W·2015-04-14; GB201406683A·2014-04-14

    Research output: Patent

  52. Published

    RESIN COMPOSITION SUITABLE FOR PRINTING AND PRINTING METHOD UTILIZING THE SAME

    Oesterreicher, A. (Inventor), Griesser, T. (Inventor), Edler, M. (Inventor), Mostegel, F. (Inventor), Gassner, M. (Inventor), Roth, M. (Inventor) & Billiani, J. (Inventor), 22 Oct 2015, IPC No. C08L 101/ 16 A I, Patent No. WO2015158718, Priority date 14 Apr 2014, Priority No. GB20140006683

    Research output: Patent

  53. Published

    Automatisierte Prozessführung und Qualitätskontrolle in der FKV-Verarbeitung

    Fauster, E., 16 Oct 2015.

    Research output: Contribution to conference › Presentation › Research

  54. Published

    Hocheffiziente Prozesse: Materialverständnis und Automation als SchlüsselelementeEine Fallbetrachtung

    Schledjewski, R., 16 Oct 2015.

    Research output: Contribution to conference › Presentation › Transfer

  55. Published

    Effect of selective localization of carbon nanotubes in pa6 dispersed phase of PP/PA6 blends on the morphology evolution with time, part 2: Relaxation of deformed droplets after cessation of flow

    Gooneie, A., Nazockdast, H. & Shahsavan, F., 12 Oct 2015, In: Polymer engineering and science. 56.2016, 1, p. 51-60 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  56. Published

    Nanocomposite Hydrogels - Fracture Toughness and Energy Dissipation Mechanisms

    Klein, A., Whitten, P. G., Resch, K. & Pinter, G., 8 Oct 2015, In: Journal of polymer science : B, Polymer physics. 53, p. 1763 - 1773 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  57. Published

    Filling behaviour of wood plastic composites

    Duretek, I., 7 Oct 2015, p. 47. 1 p.

    Research output: Contribution to conference › Presentation › Research

  58. Published

    Filling behaviour of wood plastic composites

    Duretek, I., Lucyshyn, T. & Holzer, C., 7 Oct 2015, p. 47. 1 p.

    Research output: Contribution to conference › Abstract

  59. Published

    Heute schon an morgen denken

    Klein, A., Blees, E. C. & Resch, K., 7 Oct 2015, In: Recycling-Magazin. 19, p. 30 33 p.

    Research output: Contribution to journal › Article › Research

  60. Published

    Material data for numerical simulation of powder in jection molding

    Duretek, I., 6 Oct 2015, p. 154. 1 p.

    Research output: Contribution to conference › Presentation › Research

  61. Published

    An Investigation of Mechanical and Thermal Properties of Polypropylene Clay Nanocomposites Containing Different Nanoclays

    Arunachalam, S., Battisti, M. G., Vijayakumar, C. T. & Friesenbichler, W., 1 Oct 2015, In: Macromolecular materials and engineering. 300, 10, p. 966-976 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  62. Published

    Microwave-Assisted Syntheses in Recyclable Ionic Liquids: Photoresists Based on Renewable Resources

    Petit, C.a, Luef, K.P.bc, Edler, M.d, Griesser, T.d, Kremsner, J.M.e, Stadler, A.e, Grassl, B.a, Reynaud, S.a , Wiesbrock, F.b, Edler, M. & Wiesbrock, F., 1 Oct 2015, In: ChemSusChem. Volume 8, Issue 20 , p. Pages 3401-3404

    Research output: Contribution to journal › Article › Research › peer-review

  63. Published

    Viscosity and creep compliance of polyoxymethylene copolymers of various average molecular weights

    Gonzalez-Gutierrez, J., Oblak, P., Megen, Z. & Emri, I., Oct 2015, In: Polimery/Polymers. 2015, 10, p. 620-627 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  64. Published

    Orientation of Anisometric Layered Silicate Particles in Uncompatibilized and Compatibilized Polymer Melts under Shear Flow: A Dissipative Particle Dynamics Study

    Gooneie, A., Schuschnigg, S. & Holzer, C., 29 Sept 2015, In: Macromolecular Theory and Simulations. 25.2016, 1, p. 85-98 14 p.

    Research output: Contribution to journal › Article › Research › peer-review

  65. Published

    The Cyclic CRB Test – A Quick Test for Assessing Long Term Fracture Behaviour of Polymers

    Pinter, G., Arbeiter, F., Berer, M., Schrittesser, B. & Frank, A., 25 Sept 2015, PPS 2015 - Book of Abstracts. p. 104

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  66. Published

    Utilizing Fused Deposition Modeling Techniques in Composite Processing

    Tonejc, M., Grössing, H., Habicher, M., Fauster, E. & Schledjewski, R., 24 Sept 2015, Proceedings Polymer Processing Society Conference.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  67. Published

    Utilizing Fused Deposition Modeling Techniques in Composite Processing

    Tonejc, M., 24 Sept 2015.

    Research output: Contribution to conference › Presentation › Research

  68. Published

    A Study on Material Optimization for Polypropylene Nanocomposites Based On Layered Silicates Using Elongational Flow Devices

    Neunhäuserer, A., Friesenbichler, W. & Battisti, M., 23 Sept 2015, p. 28. 1 p.

    Research output: Contribution to conference › Presentation › Research › peer-review

  69. Published

    A Study On Optimization Of Mechanical Properties for Polypropylene Nanocomposites Based On Layered Silicates Using Extensional Flow Inducing Multinozzle Systems

    Neunhäuserer, A., Battisti, M. & Friesenbichler, W., 23 Sept 2015, p. 26. 1 p.

    Research output: Contribution to conference › Presentation › Research › peer-review

  70. Published

    Influence of the relative printing angle on surface topography of 3d printed parts manufactured by fff technique

    Haar, B., Walluch, M., Katschnig, M. & Holzer, C., 23 Sept 2015.

    Research output: Contribution to conference › Poster › Research › peer-review

  71. Published

    Optimization of the Long Term Performance of Pipes by Multilayer Build Ups

    Arbeiter, F., Ševčík, M., Hutař, P., Feuchter, M., Bruckmoser, K. & Pinter, G., 23 Sept 2015, PPS 2015 - Book of Abstracts. p. 134

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  72. Published

    The Cyclic CRB Test - A Quick Test for Assessing the Long Term Fracture Behaviour of Polymers

    Pinter, G., Arbeiter, F., Berer, M., Schrittesser, B. & Frank, A., 23 Sept 2015.

    Research output: Contribution to conference › Presentation › Research

  73. Published

    Concept of Fatigue Design Methodology for short fibre reinforced Polymers considering Environmental Conditions

    Primetzhofer, A., Pinter, G., Mösenbacher, A. & Haslinger, T., 22 Sept 2015.

    Research output: Contribution to conference › Paper

  74. Published

    Mechanical Recycling of Technical Biopolymers - Possibilities & Limits: Mechanisches Recycling von technischen Biopolymeren - Möglichkeiten und Limits

    Klein, A., 22 Sept 2015, Proceedings of PPS 2015.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  75. Published

    Optimization of the Long Term Performance of Pipes by Multilayer Build Ups

    Arbeiter, F., Sevcik, M., Hutař, P., Feuchter, M., Bruckmoser, K. & Pinter, G., 22 Sept 2015.

    Research output: Contribution to conference › Presentation › Research

  76. Published

    Optimization of Twin Screw Extrusion using CFD for Polymer/Nanoclay Composites: Polymer Processing Society Regional Conference Graz 2015 Book of Abstracts

    Schuschnigg, S., Battisti, M., Winkler-Ebner, J., Friesenbichler, W. & Holzer, C., 21 Sept 2015, p. 182.

    Research output: Contribution to conference › Abstract

  77. Published

    Promising Biocompatible Monomers for Thiol-yne Based Photopolymers

    Oesterreicher, A., Wiener, J., Roth, M., Moser, A., Mostegel, F., Samusjew, A., Edler, M., Pinter, G. & Grießer, T., 21 Sept 2015, Regional Conference Polymer Processing Society Graz 2015 - Book of Abstracts. p. 295 1 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  78. Published

    Rheological Behaviour of Bronze Feedstocks at Low Shear Rates

    Kukla, C., Duretek, I., Gonzalez-Gutierrez, J. & Holzer, C., 14 Sept 2015, Euro PM2015 Congress Proceedings. Reims, France: European Powder Metallurgy Association, 6 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  79. Published

    aliphatic Polyketones - Mechanical and Thermo-Mechanical Behaviour in Wet Environments

    Guttmann, P. & Pilz, G., 9 Sept 2015. 17 p.

    Research output: Contribution to conference › Presentation › Research

  80. Published

    Evaluation of Mechanical Recyclability of Technical Biopolymers

    Klein, A., Blees, E. C. & Resch, K., 8 Sept 2015, Book of Abstracts of the 8th International Symposium on Feedstock Recycling of Polymeric Materials.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  81. Published

    Fibre length influence and filaments interaction on single and multifilaments

    Maier, A., 8 Sept 2015, Book of Abstracts.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  82. Published

    Measurement of interdiffusion in polymeric materials by applying Raman spectroscopy

    Bruckmoser, K., Resch, K., Kisslinger, T. & Lucyshyn, T., Sept 2015, In: Polymer Testing. 46, p. 122-133 12 p.

    Research output: Contribution to journal › Article › Research › peer-review

  83. Published

    Regional Conference Polymer Processing Society - Book of Abstracts

    Friesenbichler, W., Sept 2015, Eigenverlag. 336 p.

    Research output: Book/Report › Anthology › Research

  84. Published

    AFM Investigation of Epoxy Fracture Surfaces Indicating Nanoplasticity

    Haba, D., Barbezat, M. & Brunner, A. J., 27 Aug 2015, PROCEEDINGS OF THE INTERNATIONAL CONFERENCE NANOMATERIALS: APPLICATIONS AND PROPERTIES: NAP-2015. Sumy / Ukraine: Sumy State University, Vol. 4 / 1. 4 p. 01MAN01

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  85. Published

    Secondary Crack Formation as Fracture Mechanism in Nanocomposites of Epoxy and Fullerene-Like WS2

    Haba, D., Barbezat, M. & Brunner, A. J., 22 Aug 2015, PROCEEDINGS OF THE INTERNATIONAL CONFERENCE NANOMATERIALS: APPLICATIONS AND PROPERTIES : NAP-2015. Sumy / Ukraine: Sumy State University, Vol. 4 / 2. 3 p. 02NNSA03

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  86. Published

    Silicon-based mercaptans: High-performance monomers for thiol-ene photopolymerization

    Roth, M., Oesterreicher, A., Mostegel, F., Moser, A., Pinter, G., Edler, M., Piock, R. & Grießer, T., 17 Aug 2015, In: Journal of polymer science : A, Polymer chemistry. 54, 3, p. 418-424 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  87. Published

    A study on the length effect influencing the mechanical strength of glass fibre filaments

    Maier, A., 24 Jul 2015, ICCM20 Proceedings.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  88. Published

    INFLUENCE OF MEAN STRESS AND WELD LINES ON THE FATIGUE BEHAVIOUR OF SHORT FIBRE REINFORCED POLYAMIDE

    Primetzhofer, A., Pinter, G. & Mösenbacher, A., 24 Jul 2015.

    Research output: Contribution to conference › Presentation › Research

  89. Published

    INFLUENCE OF MEAN STRESS AND WELD LINES ON THE FATIGUE BEHAVIOUR OF SHORT FIBRE REINFORCED POLYAMIDE

    Primetzhofer, A., Mösenbacher, A. & Pinter, G., 24 Jul 2015. 10 p.

    Research output: Contribution to conference › Paper

  90. Published

    A Comparison of Two Measurement Techniques for Determining the 2D Permeability Characteristics of Reinforcing Textiles

    Fauster, E., 23 Jul 2015.

    Research output: Contribution to conference › Presentation › Research

  91. Published

    Mode I, Mode II and Fixed Ratio Mixed Mode I/II Fatigue Delamination of Different Carbon Fibre Reinforced Composite Laminates

    Stelzer, S., Brunner, A. & Pinter, G., 22 Jul 2015.

    Research output: Contribution to conference › Presentation › Research

  92. Published

    Optical Permeability Measurement on Tubular Braided Reinforcing Textiles

    Schillfahrt, C., 22 Jul 2015.

    Research output: Contribution to conference › Presentation › Research › peer-review

  93. Published

    Fatigue behaviour of composite-composite joints reinforced with cold metal transfer welded pins

    Stelzer, S., Ucsnik, S. & Pinter, G., 16 Jul 2015, In: International Journal of Fatigue. 81.2015, December, p. 37-47 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  94. Published

    SETTING METHOD FOR THE SEMI-AUTOMATIC PRODUCTION OF A PROCESS-CAPABLE BASIC SETTING FOR AN INJECTION MOLDING MACHINE

    Friesenbichler, W. (Inventor), 8 Jul 2015, IPC No. B29C45/76, Patent No. EP2358514 (B1)

    Research output: Patent

  95. Published

    Potential for Cure Time Reduction in Rubber Injection Molding and its Analytical Prediction

    Friesenbichler, W., Perko, L. & Fasching, M., 2 Jul 2015.

    Research output: Contribution to conference › Presentation › Research › peer-review

  96. Published

    Fatigue delamination growth in CFRP composites: Fixed Ratio Mixed Mode I/II compared with Mode I and Mode II

    Stelzer, S., Pinter, G., Brunner, A. & Terrasi, G. P., 1 Jul 2015.

    Research output: Contribution to conference › Poster › Research

  97. Published

    Stiffness and strength based modelsfor the fatigue-life predictionof continuously fiber reinforced composites

    Pinter, G. & Maier, J., 1 Jul 2015.

    Research output: Contribution to conference › Presentation › Research

  98. Published

    Characterization of the mechanical and fatigue behavior of braided composites made of twisted yarns

    Wolfahrt, M., Grosser, J., Fleischmann, M., Schubert, M. & Pinter, G., Jul 2015, Materials Science Forum. Vol. 825-826.2015. p. 876-882 7 p. (Materials Science Forum).

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  99. Published

    Composite-Composite Joining with through the Thickness Reinforcements for Enhanced Damage Tolerance

    Stelzer, S., Ucsnik, S. & Pinter, G. G., Jul 2015, Materials Science Forum. Vol. 825-826.2015. p. 883-890 10 p. (Materials Science Forum).

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  100. Published

    Mode I, Mode II and Fixed Ratio Mixed Mode I/II fatigue delamination of different carbon fiber reinforced composite laminates

    Stelzer, S., Brunner, A. & Pinter, G., Jul 2015, Proceedings of the 20th International Conference on Composite Materials. Coopenhagen, 7 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  101. Published

    Optical Permeability Measurement on Tubular Braided Reinforcing Textiles

    Schillfahrt, C., Fauster, E. & Schledjewski, R., Jul 2015, Proceedings of the 20th International Conference on Composite Materials. 12 p. 3406-2

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  102. Published

    Cartucho explosivo

    Moser, P. (Inventor), Bauer, F. (Inventor), Friesenbichler, W. (Inventor), Fertschej, A. (Inventor) & Schatzer, R. (Inventor), 25 Jun 2015, IPC No. F42D 1/ 10 A I, Patent No. ES2538987T, Priority date 25 Mar 2011, Priority No. WO2011EP54635

    Research output: Patent

Previous 1...15 16 17 18 19 20 21 22 ...42 Next
View graph of relations

Contact information

Otto Glöckel-Straße 2, 8700 Leoben
  • Main phone number: +43 3842 402 2301