Department Polymer Engineering and Science

Organisational unit: Departments and Institutes

1401 - 1500 out of 4,192Page size: 100

Research output

  1. 2017
  2. Published

    Material behavior of carboxylated nitrile butadiene rubber (XNBR) in dependence on crosslinker and medium

    Fleischmann, D. D., Arbeiter, F., Schlögl, S. & Kern, W., 5 Sept 2017.

    Research output: Contribution to conference › Poster › Research

  3. Published

    Produktionsplanung um Übergang zwischen diskreter und Batch-Fertigung in der Composite Luftfahrt Industrie

    Hueber, C., Fischer, G. & Schledjewski, R., Sept 2017, Logistisches Produktionsmanagement: 4. Wissenschaftlicher Industrielogistik-Dialog in Leoben (WiLD). Zsifkovits, H. E. & Altendorfer-Kaiser, S. (eds.). p. 63-70

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  4. Published

    3D Printing of Polymer-Bonded Rare-Earth Magnets with a Variable Magnetic Compound Fraction for a Predefined Stray Field

    Huber, C., Abert, C., Bruckner, F., Groenefeld, M., Schuschnigg, S., Teliban, I., Vogler, C., Wautischer, G., Windl, R. & Suess, D., 25 Aug 2017, In: Scientific reports. 7.2017, 1, 8 p., 9419.

    Research output: Contribution to journal › Article › Research › peer-review

  5. Published

    INFLUENCE OF PROCESSING TEMPERATURES ON THE DEFLECTION OF HYBRID-METAL-CARBON COMPOSITES MADE BY RESIN TRANSFER MOULDING

    Hergan, P., Beter, J., Stelzer, S., Fauster, E. & Schledjewski, R., 25 Aug 2017, Proceedings of the 21st International Conference on Composite Materials.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  6. Published

    Exploring photo-curable thiol-yne resins for the 3D printing of biomedical devices

    Griesser, H., Oesterreicher, A. (Co-editor), Moser, A. (Co-editor), Schlögl, S. (Co-editor), Pichelmayer, M. (Co-editor) & Grießer, T. (Co-editor), 22 Aug 2017.

    Research output: Contribution to conference › Poster › Research

  7. Published

    Light triggered formation of photo-responsive epoxy based networks

    Rinaldi, R., Radl, S. V. (Co-editor), Roppolo, I. (Co-editor), Pölzl, K. (Co-editor), Ast, M. (Co-editor), Spreitz, J. (Co-editor), Grießer, T. (Co-editor), Kern, W. (Co-editor), Schlögl, S. (Co-editor) & Sangermano, M. (Co-editor), 22 Aug 2017.

    Research output: Contribution to conference › Poster › Research

  8. Published

    Cascade Injection Procedure for Bladder-assisted Resin Transfer Molding

    Schillfahrt, C., Fauster, E. & Schledjewski, R., 21 Aug 2017. 11 p.

    Research output: Contribution to conference › Paper › peer-review

  9. Published

    Simple method for the quantitative analysis of thin copolymer films on substrates by infrared spectroscopy using direct calibration

    Tazreiter, M., Christian, P., Schennach, R., Grießer, T. & Coclite, A. M., 21 Aug 2017, In: Analytical Methods. 9.2017, 36, p. 5266-5273 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  10. Published

    composição de resina adequada para impressão e método de impressão com o uso da mesma

    Andreas, O. (Inventor), Florian, M. (Inventor), Janine, B. (Inventor), Martina, G. (Inventor), Matthias, E. (Inventor), Meinhart, R. (Inventor) & Thomas, G. (Inventor), 15 Aug 2017, IPC No. C08L 101/ 16 A I, Patent No. BR112016023872, Priority date 14 Apr 2015, Priority No. WO2015EP58082

    Research output: Patent

  11. Published

    Polymer nanocomposites with cellulose nanocrystals made by co-precipitation

    Natterodt, J. C., Shirole, A., Sapkota, J., Zoppe, J. & Weder, C., 9 Aug 2017, In: Journal of Applied Polymer Science. 135.2018, 24, 9 p., 45648.

    Research output: Contribution to journal › Article › Research › peer-review

  12. E-pub ahead of print

    Influence of Melt Compounding on Blast Furnace Slag Filled PP Compounds: A Comparative Study

    Mostafa, A., Pacher, G., Lucyshyn, T., Holzer, C., Krischey, E., Flachberger, H., Fritz, B. & Laske, S., 31 Jul 2017, (E-pub ahead of print) In: International polymer processing. 32.2017, 4, p. 446-454 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  13. E-pub ahead of print

    Influence of cooling rate and annealing on the DSC Tg of an epoxy resin

    Tao, Q., Pinter, G. & Krivec, T., 27 Jul 2017, (E-pub ahead of print) In: Microelectronics Reliability. 78.2017, November, p. 396-400 5 p.

    Research output: Contribution to journal › Article › Research › peer-review

  14. Published

    HybridRTM - Quality Controlled Manufacturing of Hybrid Material Composites through Resin Transfer Moulding

    Fauster, E., Hergan, P., Stelzer, S., Scheiblhofer, S., Cespedes-Gonzales, G., Pfeifer, S., Rittenschober, B., Sieberer, M., Lauermann, M. & Schledjewski, R., 7 Jul 2017.

    Research output: Contribution to conference › Paper › peer-review

  15. Published

    High performance green composites for green technologies

    Schledjewski, R., Lloret Pertegas, S., Blößl, Y., Anusic, A., Resch-Fauster, K., Mahendran, A. R. & Wuzella, G., 6 Jul 2017, Key Engineering Materials. Trans Tech Publications, Vol. 742. p. 271-277 7 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  16. Published

    HybridRTM - Quality Controlled Manufacturing of Hybrid Material Composites through Resin Transfer Moulding

    Fauster, E., 6 Jul 2017.

    Research output: Contribution to conference › Presentation › Research

  17. E-pub ahead of print

    Shrinkage and Warpage Optimization of Expanded-Perlite-Filled Polypropylene Composites in Extrusion-Based Additive Manufacturing

    Spörk, M., Sapkota, J., Weingrill, G., Fischinger, T., Arbeiter, F. & Holzer, C., 4 Jul 2017, (E-pub ahead of print) In: Macromolecular materials and engineering. 302.2017, 10, 13 p., 1700143.

    Research output: Contribution to journal › Article › Research › peer-review

  18. Published

    Development of highly-filled polymer compounds for fused filament fabrication of ceramics and solvent debinding

    Cano Cano, S., Gonzalez-Gutierrez, J., Sapkota, J., Kukla, C. & Holzer, C., 27 Jun 2017.

    Research output: Contribution to conference › Presentation › Research

  19. E-pub ahead of print

    Parametric optimization of intra- and inter-layer strengths in parts produced by extrusion-based additive manufacturing of poly(lactic acid)

    Spörk, M., Arbeiter, F., Cajner, H., Sapkota, J. & Holzer, C., 26 Jun 2017, (E-pub ahead of print) In: Journal of Applied Polymer Science. 134.2017, 41, 15 p., 45401.

    Research output: Contribution to journal › Article › Research › peer-review

  20. Published

    Accelerated Tests for Lifetime Prediction of PE-HD Pipe Grades

    Nezbedová, E., Pinter, G. G., Frank, A., Hutař, P., Poduška, J. & Hodan, J., 22 Jun 2017, In: Macromolecular Symposia. 373.2017, 1, 8 p., 1600096.

    Research output: Contribution to journal › Article › Research › peer-review

  21. Published

    A study on cooling performance in injection molding. Heat conductive mold materials versus conformal cooling channels. Proceedings Europe Africa Conference 2017 of the POLYMER PROCESSING SOCIETY (PPS)

    Berger, G., Friesenbichler, W., Zorn, D. & Bevc, F., 22 Jun 2017

    Research output: Non-textual form › Digital or Visual Products › Research

  22. Published

    A study on the optimization of thermal conductivity of HDPE using micro- and nanoscale fillers: Proceedings Europe Africa Conference 2017 of the POLYMER PROCESSING SOCIETY (PPS)

    Stieger, S., 22 Jun 2017.

    Research output: Contribution to conference › Poster › Research

  23. Published

    Influence of Thermo-Oxidative Ageing of HNBR in Oil Field Applications

    Balasooriya, W., Schrittesser, B. C., Karunakaran, S., Schlögl, S., Pinter, G. G., Schwarz, T. & Kadar, Z., 22 Jun 2017, In: Macromolecular Symposia. 373.2017, 1, 16 p., 1600093.

    Research output: Contribution to journal › Article › Research › peer-review

  24. Published

    Viscosity Measurements for Rubber Compounds using Slit-die Rheometry: Proceedings Europe Africa Conference 2017 of the POLYMER PROCESSING SOCIETY (PPS)

    Friesenbichler, W. & Neunhäuserer, A., 22 Jun 2017

    Research output: Non-textual form › Digital or Visual Products › Research

  25. Published

    Crosslinking and post-crosslinking of ethylene vinyl acetate in photovoltaic modules

    Oreski, G., Rauschenbach, A., Hirschl, C., Kraft, M., Eder, G. C. & Pinter, G. G., 15 Jun 2017, In: Journal of Applied Polymer Science. 134.2017, 23, 9 p., 44912.

    Research output: Contribution to journal › Article › Research › peer-review

  26. Published

    SHAPING, DEBINDING AND SINTERING OF STEEL COMPONENTS VIA FUSED FILAMENT FABRICATION

    Gonzalez-Gutierrez, J., Godec, D., Kukla, C., Schlauf, T., Burkhardt, C. & Holzer, C., 8 Jun 2017, 16th International Scientific Conference on Production Engineering. Udiljak, T. (ed.). Zadar, Croatia, p. 99 104 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  27. Published

    Fused Filament Fabrication (FFF) of PIM Feedstocks

    Kukla, C., Gonzalez-Gutierrez, J., Cano Cano, S., Hampel, S., Burkhardt, C., Moritz, T. & Holzer, C., 7 Jun 2017, ACTAS DEL VI CONGRESO NACIONAL DE PULVIMETALURGIA Y I CONGRESO IBEROAMERICANO DE PULVIMETALURGIA. Herranz, G., Ferrari, B. & Cabrera, J. M. (eds.). Ciudad Real, Spain, Vol. 6. p. 1-6 6 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  28. E-pub ahead of print

    Applicability of technical biopolymers as absorber materials in solar thermal collectors

    Klein, A., Oreski, G. & Resch-Fauster, K., 1 Jun 2017, (E-pub ahead of print) In: Solar energy. 153.2017, 1 September, p. 276-288 13 p.

    Research output: Contribution to journal › Article › Research › peer-review

  29. Published

    Kühlperformance beim Spritzgießen von Kunststoffen. Verleich einer konturnahen und einer blutgefäßartigen Werkzeugkühlung mit einem Formeinsatz höherer Wärmeleitfähigkeit

    Berger, G., Panzl, G., Zorn, D., Bevc, F. & Friesenbichler, W., Jun 2017, Rapid.Tech – International Trade Show & Conference for Additive Manufacturing : Proceedings of the 14th Rapid.Tech Conference Erfurt, Germany, 20 – 22 June 2017. Kynast, M., Eichmann, M. & Witt, G. (eds.). p. 123-139

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  30. Published

    Analytical modeling of textile parameters and draping behavior of 2D biaxial braided sleevings

    Schillfahrt, C. & Schledjewski, R., 31 May 2017, In: Polymers & Polymer Composites (Polymers and polymer composites). 25.2017, 5, p. 315-326 12 p.

    Research output: Contribution to journal › Article › Research › peer-review

  31. Published

    Effect of cyclic fatigue on the fracture toughness of Polyoxymethylene

    Ramoa, B., Berer, M., Schwaiger, M. & Pinter, G. G., 31 May 2017, In: Journal of Physics: Conference Series. 2017, 843, p. 168-176 9 p., 012052.

    Research output: Contribution to journal › Article › Research › peer-review

  32. Published

    Fused Filament Fabrication for the production of metal and/or ceramic parts and feedstocks therefore

    Kukla, C., Gonzalez-Gutierrez, J., Cano Cano, S., Burkhardt, C., Hampel, S., Moritz, T. & Holzer, C., 29 May 2017, 19th Plansee Seminar. Reutte, Austria: Plansee AG, Vol. 19. 9 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  33. Published

    Fused Filament Fabrication for the Production of Metal and/or Ceramic Parts and Feedstocks Therefore

    Kukla, C., Gonzalez-Gutierrez, J., Cano Cano, S., Burkhardt, C., Hampel, S., Moritz, T. & Holzer, C., 29 May 2017. 1 p.

    Research output: Contribution to conference › Poster › Research

  34. Published

    Effect of interfacial polarization and water absorption on the dielectric properties of epoxy-nanocomposites

    Marx, P., Wanner, A. J., Zhang, Z., Jin, H., Tsekmes, I. A., Smit, J. J., Kern, W. & Wiesbrock, F., 28 May 2017, In: Polymers. 9.2017, 6, 16 p., 195.

    Research output: Contribution to journal › Article › Research › peer-review

  35. Published

    A refined model for the mechanical properties of polymer composites with nanorods having different length distributions

    Sapkota, J., Gooneie, A., Shirole, A. & Martinez Garcia, J. C., 25 May 2017, In: Journal of Applied Polymer Science. 134.2017, 36, 7 p., 45279.

    Research output: Contribution to journal › Article › Research › peer-review

  36. Published

    Reinterpretation of the mechanical reinforcement of polymer nanocomposites reinforced with cellulose nanorods

    Sapkota, J., Martinez Garcia, J. C. & Lattuada, M., 15 May 2017, In: Journal of Applied Polymer Science. 134.2017, 35, 6 p., 45254.

    Research output: Contribution to journal › Article › Research › peer-review

  37. Published

    FILLER CONTENT AND PROPERTIES OF HIGHLY FILLED FILAMENTS FOR FUSED FILAMENT FABRICATION OF MAGNETS

    Gonzalez-Gutierrez, J., Duretek, I., Arbeiter, F., Kukla, C. & Holzer, C., 9 May 2017, ANTEC® 2017. Anaheim, California, USA, 4 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  38. Published

    Influence of long-term annealing on residual stress distribution and quasi-brittle failure properties of talcum reinforced pipe grade polypropylene

    Arbeiter, F., Pinter, G. & Frank, A., 9 May 2017.

    Research output: Contribution to conference › Paper › peer-review

  39. Published

    Characterization of slow crack growth resistance of polyethylene pipe grades with cyclic cracked round bar (CRB) test in correlation to strain hardening (SH) test

    Berger, I. J., Frank, A., Arbeiter, F. & Pinter, G., 8 May 2017.

    Research output: Contribution to conference › Paper › peer-review

  40. Published

    The Cyclic Cracked Round Bar Test as a new standard for accelerated material ranking of polyethylene pipe grades

    Frank, A., Berger, I. J., Arbeiter, F. & Pinter, G., 8 May 2017.

    Research output: Contribution to conference › Paper › peer-review

  41. Published

    Development of fully bio-based composite materials for structural applications Processing case study based on small sized wind energy turbine blades

    Schledjewski, R. & Blößl, Y., May 2017, Polymer Composites 2017. Foller, B. (ed.). p. 051-053

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  42. Published

    Properties of glass filled polypropylene for Fused Filament Fabrication

    Spörk, M., Savandaiah, C., Arbeiter, F., Schuschnigg, S. & Holzer, C., May 2017.

    Research output: Contribution to conference › Paper › peer-review

  43. Published

    Continuous welding of unidirectional fiber reinforced thermoplastic tape material

    Schledjewski, R., 27 Apr 2017, AIP Conference Proceedings. American Institute of Physics, p. 1-5 5 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  44. E-pub ahead of print

    Anti-adhesive layers on stainless steel using thermally stable dipodal perfluoroalkyl silanes

    Kaynak, B., Alpan, C., Kratzer, M., Ganser, C., Teichert, C. & Kern, W., 25 Apr 2017, (E-pub ahead of print) In: Applied surface science. 416.2017, 15 September, p. 824-833 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  45. Published

    MOLECULAR DYNAMICS SIMULATIONS AS A TOOL FOR MATERIAL SELECTION IN METAL INJECTION MOULDING FEEDSTOCKS

    Gooneie, A., Gonzalez-Gutierrez, J., Kukla, C. & Holzer, C., 24 Apr 2017, CONFERENCE PROCEEDINGS ICIT&APT 2017 10th International Conference on Industrial Tools and Advanced Processing Technologies. Hancic, A. & Grum, J. (eds.). Ljubljana, Slovenia, Vol. 10. 1 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  46. Published

    The SDS process: A viable way for the production of metal parts

    Kukla, C., Gonzalez-Gutierrez, J., Hampel, S., Burkhardt, C. & Holzer, C., 24 Apr 2017, CONFERENCE PROCEEDINGS ICIT&APT 2017 10th International Conference on Industrial Tools and Advanced Processing Technologies. Hancic, A. & Grum, J. (eds.). Vol. 10. 1 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  47. Published

    Auslegung konturnaher Kühlsysteme für Spritzgießwerkzeuge. Vergleich von SLM-gedruckten mit hochwärmeleitfähigen konventionellen Formeinsätzen

    Berger, G., Zorn, D., Panzl, G. & Bevc, F., 21 Apr 2017, p. 229-243. 15 p.

    Research output: Contribution to conference › Presentation › Research › peer-review

  48. Published

    Modell-Basierte FKV-Verarbeitungstechnik an Beispielen der Flüssigimprägnierverfahren

    Fauster, E., Hergan, P., Thirunavukkarasu, J., Vilaca Lourenco, G. & Schledjewski, R., 21 Apr 2017.

    Research output: Contribution to conference › Poster › Research

  49. Published

    Advanced Manufacturing ganzheitlich betrachtet – Von der Produktentwicklung zum Null-Fehler-Serienprozess

    Berger, G., 20 Apr 2017, p. 53-65. 13 p.

    Research output: Contribution to conference › Presentation › Research › peer-review

  50. Published

    Metal Injection Moulding for the Production of Recycled Rare Earth Magnets

    Gonzalez-Gutierrez, J., Walton, A., Schlauf, T., Burkhardt, C., Kukla, C., Krispin, M. & Holzer, C., 20 Apr 2017. 1 p.

    Research output: Contribution to conference › Poster › Research

  51. Published

    PRINTABLE ESTER BASED RESIN COMPOSITIONS AND PRINTING METHOD UTILIZING THE SAME

    Oesterreicher, A. (Inventor), GRIEßER, T. (Inventor), Edler, M. (Inventor), Mostegel, F. (Inventor) & Roth, M. (Inventor), 20 Apr 2017, IPC No. C08L 101/ 00 A I, Patent No. WO2017064145, Priority date 12 Oct 2015, Priority No. GB20150018033

    Research output: Patent

  52. Published

    Spritzgusssimulation als Basis optimierter Bauteile

    Primetzhofer, A., Stadler, G. & Pinter, G. G., 20 Apr 2017.

    Research output: Contribution to conference › Paper

  53. Published

    Spritzgusssimulation als Basis optimierter Bauteile

    Primetzhofer, A., Stadler, G. & Pinter, G. G., 20 Apr 2017.

    Research output: Contribution to conference › Poster › Research

  54. Published

    Highly Water-soluble alpha-Hydroxyalkylphenone Based Photoinitiator for Low-migration Applications

    Roth, M., Hennen, D., Oesterreicher, A., Mostegel, F., Samusjew, A., Edler, M., Maier, E. & Grießer, T., 18 Apr 2017, In: Macromolecular chemistry and physics. 218.2017, 14, 6 p., 1700022.

    Research output: Contribution to journal › Article › Research › peer-review

  55. Published

    Vorrichtung und Verfahren zum Faserspritzgießen von Spritzgussteilen

    Berger-Weber, G. (Inventor), Bevc, F. (Inventor), Bodor, C. (Inventor), Friesenbichler, W. (Inventor), Petschnig, A. (Inventor) & Schadler, W. (Inventor), 5 Apr 2017, IPC No. B29C45/00, B29K105/06, Patent No. EP3148765

    Research output: Patent

  56. Published

    Comparison of different microclimate effects on the aging behavior of encapsulation materials used in photovoltaic modules

    Ottersböck, B., Oreski, G. & Pinter, G. G., 1 Apr 2017, In: Polymer Degradation and Stability. 138.2017, April, p. 182-191 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  57. Published

    26. Leobener Kunststoff-Kolloquium 20. und 21. April 2017: Schriftenreihe Kunststofftechnik

    Friesenbichler, W. & Berger, G., Apr 2017, Leoben: Eigenverlag. 275 p.

    Research output: Book/Report › Anthology › Research

  58. Published

    Advanced Manufacturing ganzheitlich betrachtet – Von der Produktentwicklung zum Null-Fehler-Serienprozess

    Berger, G., Apr 2017, 26. Leobener Kunststoff-Kolloquium 20. und 21. April 2017: Schriftenreihe Kunststofftechnik. Friesenbichler, W. & Berger, G. (eds.). Leoben, Vol. 7. p. 53-65 13 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  59. Published

    ADVANCES IN INJECTION MOLDING COMPOUNDING ON CARBON FOORPRINT IN THE PRODUCTION OF POLYMER NANOCOMPOSITES

    Neunhäuserer, A., Arunachalam, S. & Friesenbichler, W., Apr 2017

    Research output: Non-textual form › Digital or Visual Products › Research

  60. Published

    Auslegung konturnaher Kühlsysteme für Spritzgießwerkzeuge. Vergleich von SLM-gedruckten mit hochwärmeleitfähigen konventionellen Formeinsätzen

    Berger, G., Zorn, D., Panzl, G. & Bevc, F., Apr 2017, 26. Leobener Kunststoff-Kolloquium 20. und 21. April 2017: Schriftenreihe Kunststofftechnik. Friesenbichler, W. & Berger, G. (eds.). Leoben, Vol. 7. p. 229-243 15 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  61. Published

    Bio-basierte Verbundwerkstoffe

    Schledjewski, R., Resch-Fauster, K., Anusic, A. & Blößl, Y., Apr 2017, Tagungsband zum 26. Leobener Kunststoff-Kolloquium: Innovative Spritzgiesstechnologie - Trends und aktuelle Entwicklungen. Friesenbichler, W. & Berger, G. R. (eds.). Leoben: Eigenverlag, Vol. 7. p. 263-264

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  62. Published

    Bio-basierte Verbundwerkstoffe

    Schledjewski, R., Resch-Fauster, K., Anusic, A. & Blößl, Y., Apr 2017.

    Research output: Contribution to conference › Poster › Transfer

  63. Published

    Das Kautschukspritzgießen - Maschinen-, Prozess- und Werkzeugtechnik

    Friesenbichler, W. & Kerschbaumer, R., Apr 2017, 26. Leobener Kunststoff-Kolloquium 20. und 21. April 2017: Schriftenreihe Kunststofftechnik. Friesenbichler, W. & Berger, G. (eds.). Leoben, Vol. 7. p. 107-128 22 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  64. Published

    Das Kautschukspritzgießen - Maschinen-, Prozess- und Werkzeugtechnik

    Friesenbichler, W. & Kerschbaumer, R., Apr 2017, p. 107-128. 22 p.

    Research output: Contribution to conference › Presentation › Research › peer-review

  65. Published

    Die Physik der Oberfläche – Oberflächeneigenschaften und Haptik

    Friesenbichler, W., Gruber, D. P. & Haselmann, M., Apr 2017, 26. Leobener Kunststoff-Kolloquium 20. und 21. April 2017: Schriftenreihe Kunststofftechnik. Friesenbichler, W. & Berger, G. (eds.). Leoben, Vol. 7. p. 165-175 11 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  66. Published

    Effiziente Verarbeitung von Verbundwerkstoffen für Luftfahrtanwendungen

    Schledjewski, R., Hueber, C., Konstantopoulos, S., Lloret Pertegas, S. & Tonejc, M., Apr 2017, Tagungsband zum 26. Leobener Kunststoff-Kolloquium: Innovative Spritzgiesstechnologie - Trends und aktuelle Entwicklungen. Friesenbichler, W. & Berger, G. R. (eds.). Leoben: Eigenverlag, Vol. 07. p. 261-262 2 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  67. Published

    Effiziente Verarbeitung von Verbundwerkstoffen für Luftfahrtanwendungen

    Schledjewski, R., Hueber, C., Konstantopoulos, S., Lloret Pertegas, S. & Tonejc, M., Apr 2017.

    Research output: Contribution to conference › Poster › Transfer

  68. Published

    Herausforderungen und Grenzen des Kautschukspritzgießens

    Fasching, M., Friesenbichler, W. & Berger, G., Apr 2017, 26. Leobener Kunststoff-Kolloquium 20. und 21. April 2017: Schriftenreihe Kunststofftechnik. Friesenbichler, W. & Berger, G. (eds.). Leoben, Vol. 7. p. 129-136 8 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  69. Published

    Moffatt-Eddies: Existing in Rubber Processing?

    Kerschbaumer, R., Lechner, B. & Friesenbichler, W., Apr 2017, 26. Leobener Kunststoff-Kolloquium 20. und 21. April 2017: Schriftenreihe Kunststofftechnik. Friesenbichler, W. & Berger, G. (eds.). Leoben, Vol. 7. p. 257-258 2 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  70. Published

    Neue anti-adhäsive Beschichtungen für Metalle

    Kaynak, B., Berger, G. & Kern, W., Apr 2017, 26. Leobener Kunststoff-Kolloquium 20. und 21. April 2017: Schriftenreihe Kunststofftechnik. Friesenbichler, W. & Berger, G. (eds.). Leoben, Vol. 7. p. 187-199 13 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  71. Published

    Strömungs- und Temperaturverhältnisse in der Kautschuk-Plastifiziereinheit

    Kerschbaumer, R., Lechner, B., Graninger, G. & Friesenbichler, W., Apr 2017, 26. Leobener Kunststoff-Kolloquium 20. und 21. April 2017: Schriftenreihe Kunststofftechnik. Friesenbichler, W. & Berger, G. (eds.). Leoben, Vol. 7. p. 155-164 10 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  72. Published

    THE IMPORTANCE OF VISCOELASTICITY AND PRESSURE DEPENDENCE OF VISCOSITY FOR SIMULATION OF MELT FLOW IN INJECTION MOLDING AND CAPILLARY RHEOMETRY

    Friesenbichler, W., Neunhäuserer, A., Fasching, M. A. & Mitsoulis, E., Apr 2017

    Research output: Non-textual form › Digital or Visual Products › Research

  73. Published

    Verarbeitung von Verbundwerkstoffen

    Schledjewski, R. & Fauster, E., Apr 2017, Tagungsband zum 26. Leobener Kunststoff-Kolloquium: Innovative Spritzgiesstechnologie - Trends und aktuelle Entwicklungen. Friesenbichler, W. & Berger, G. R. (eds.). Leoben: Eigenverlag, Vol. 7. p. 265-266

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  74. Published

    Verarbeitung von Verbundwerkstoffen

    Schledjewski, R. & Fauster, E., Apr 2017.

    Research output: Contribution to conference › Poster › Transfer

  75. Published

    Verbesserung der Wärmeleitfähigkeit von HDPE durch Einsatz mikro- und nanoskaliger Füllstoffe

    Stieger, S., Berger, G., Battisti, M. & Friesenbichler, W., Apr 2017, 26. Leobener Kunststoff-Kolloquium 20. und 21. April 2017: Schriftenreihe Kunststofftechnik. Friesenbichler, W. & Berger, G. (eds.). Leoben, Vol. 7. p. 247-248 2 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  76. Published

    Fatigue Analysis of Continuously Carbon Fiber Reinforced Laminates

    Maier, J., Pinter, G. G., Gaier, C. & Fischmeister, S., 28 Mar 2017, In: SAE International Journal of Engines. 10.2017, 2, p. 305-315 11 p., 2017-01-0327.

    Research output: Contribution to journal › Article › Research › peer-review

  77. Published

    Flüssigimprägnierung von Naturfasertextilien im Vergleich mit synthetischen Faserverstärkungen

    Blößl, Y. & Schledjewski, R., 24 Mar 2017.

    Research output: Contribution to conference › Abstract › peer-review

  78. Published

    Hybride Verbundwerkstoffe: Potenziale und Herausforderungen

    Hergan, P., Fauster, E., Stelzer, S., Pinter, G. & Schledjewski, R., 24 Mar 2017.

    Research output: Contribution to conference › Abstract › peer-review

  79. E-pub ahead of print

    Simplified explicit finite element model for the impact of a wheel on a crossing – Validation and parameter study

    Wiedorn, J., Daves, W., Ossberger, U., Ossberger, H. & Pletz, M., 18 Mar 2017, (E-pub ahead of print) In: Tribology International. 111.2017, July, p. 254-264 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  80. E-pub ahead of print

    Finite element study of mode I crack opening effects in compression-loaded cracked cylinders

    Berer, M., Mitev, I. & Pinter, G. G., 10 Mar 2017, (E-pub ahead of print) In: Engineering Fracture Mechanics. 175.2017, 15 April, p. 1-14 14 p.

    Research output: Contribution to journal › Article › Research › peer-review

  81. E-pub ahead of print

    The effects of e-beam crosslinking of LDPE on the permeation of hydrocarbons

    Berger, K., Keimel, C., Helfer, E., Haar, B., Mattausch, H., Riess, G. & Kern, W., 6 Mar 2017, (E-pub ahead of print) In: Journal of Applied Polymer Science. 134.2017, 25, 8 p., 44968.

    Research output: Contribution to journal › Article › Research › peer-review

  82. Published

    Flow behaviour of rubber in capillary and injection moulding dies

    Mitsoulis, E., Battisti, M., Neunhäuserer, A., Perko, L., Friesenbichler, W., Ansari, M. & Hatzikiriakos, S. G., 5 Mar 2017, In: Plastics, rubber and composites. 46.2017, 3, p. 110-118 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  83. Published

    Efficient initiation of radical‐mediated thiol‐ene chemistry with photoactive silica particles

    Sahin, M., Schlögl, S., Kaiser, S., Kern, W., Wang, J. & Grützmacher, H., 1 Mar 2017, In: Journal of polymer science : A, Polymer chemistry. 55.2017, 5, p. 894-902 9 p., 55.

    Research output: Contribution to journal › Article › Research › peer-review

  84. Published

    Einfluss der Alterung auf HNBR in der Erdölindustrie

    Balasooriya, W., Schrittesser, B., Pinter, G. G. & Schwarz, T., 1 Mar 2017, In: GAK : Gummi, Fasern, Kunststoffe. 70.2017, 3, p. 168-176 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  85. Published

    RESIN COMPOSITION SUITABLE FOR PRINTING AND PRINTING METHOD UTILIZING THE SAME

    Oesterreicher, A. (Inventor), GRIEßER, T. (Inventor), Edler, M. (Inventor), Mostegel, F. (Inventor), Gassner, M. (Inventor), Roth, M. (Inventor) & Billiani, J. (Inventor), 23 Feb 2017, IPC No. C09D 181/ 02 A I, Patent No. US2017051112, Priority date 14 Apr 2015, Priority No. WO2015EP58082

    Research output: Patent

  86. Published

    Resin composition suitable for printing and printing method utilizing the same

    安德烈亚斯·厄斯特赖歇尔, A. (Inventor), 托马斯·格里塞尔, T. (Inventor), 马蒂亚斯·埃德勒, M. (Inventor), 弗洛里安·莫斯特格尔, F. (Inventor), 马丁娜·加斯纳, M. (Inventor), 迈因巴尔特·罗特, M. (Inventor) & 亚尼内·比利亚尼, J. (Inventor), 22 Feb 2017, IPC No. C08G 75/ 14 A I, Patent No. CN106456831, Priority date 14 Apr 2015, Priority No. WO2015EP58082

    Research output: Patent

  87. Published

    ZUM DRUCKEN GEEIGNETE HARZZUSAMMENSETZUNG UND DRUCKVERFAHREN DAMIT

    Oesterreicher, A. (Inventor), Griesser, T. (Inventor), Edler, M. (Inventor), Mostegel, F. (Inventor), Gassner, M. (Inventor), Roth, M. (Inventor) & Billiani, J. (Inventor), 22 Feb 2017, IPC No. C08L 101/ 16 A I, Patent No. EP3131952, Priority date 14 Apr 2015, Priority No. WO2015EP58082

    Research output: Patent

  88. Published

    Enhancing the stability of UV‐curable thiol/vinyl carbonate resins

    Edler, M., Mostegel, F., Roth, M., Österreicher, A. & Kappaun, S., 20 Feb 2017, In: Journal of Applied Polymer Science. 134.2017, 24, 7 p., 44934.

    Research output: Contribution to journal › Article › Research

  89. Published

    RESIN COMPOSITION SUITABLE FOR PRINTING AND PRINTING METHOD UTILIZING THE SAME

    Oesterreicher, A. (Inventor), Edler, M. (Inventor), Mostegel, F. (Inventor), Billiani, J. (Inventor), Roth, M. (Inventor), Hartmann, D. G. (Inventor) & Grießer, T. (Inventor), 17 Feb 2017, IPC No. C08G75/14,A61F2/02,C08F38/00 , Patent No. IN201617038522

    Research output: Patent

  90. Published

    Filling behaviour of wood plastic composites

    Duretek, I., Lucyshyn, T. & Holzer, C., 16 Feb 2017, In: Journal of Physics: Conference Series. 790, 1, 012006.

    Research output: Contribution to journal › Conference article › peer-review

  91. Published

    METHOD FOR PRODUCING A CROSSLINKED ELASTOMER

    Holzner, A. (Inventor), Kern, W. (Inventor), Schaller, R. (Inventor) & Schlögl, S. (Inventor), 15 Feb 2017, IPC No. C08G 61/ 04 A I, Patent No. MY159943, Priority date 17 Mar 2009, Priority No. AT20090000421

    Research output: Patent

  92. Published

    Rheology of PIM feedstocks

    Kukla, C., Duretek, I., Gonzalez-Gutierrez, J. & Holzer, C., 9 Feb 2017, In: Metal Powder Report. 72, 1, p. 39-44 6 p.

    Research output: Contribution to journal › Article › Research

  93. Published

    Photo-responsive thiol-ene networks for the design of switchable polymer patterns

    Radl, S. V., Schipfer, C., Kaiser, S., Moser, A., Kaynak, B., Kern, W. & Schlögl, S., 31 Jan 2017, In: Polymer Chemistry. 8.2017, 9, p. 1562-1572 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  94. Published

    Ammoxidized Fenton-Activated Pine Kraft Lignin Accelerates Synthesis and Curing of Resole Resins

    Ghorbani, M., Konnerth, J., Budjav, E., Requejo Silva, A., Zinovyev, G., van Herwijnen, H. W. G., Edler, M., Grießer, T. & Liebner, F., 28 Jan 2017, In: Polymers. 9.2017, 2, 17 p., 43.

    Research output: Contribution to journal › Article › Research › peer-review

  95. Published

    RESIN COMPOSITION SUITABLE FOR PRINTING AND PRINTING METHOD UTILIZING THE SAME

    외스터라이허안드레아스 (Inventor), 그리쎄어토마스 (Inventor), 에들러마티아스 (Inventor), 모스테겔플로리안 (Inventor), 가스너마르티나 (Inventor), 로스마인하트 (Inventor) & 빌리아니야니네 (Inventor), 26 Jan 2017, IPC No. C09D 4/ 00 A I, Patent No. KR20170010309, Priority date 14 Apr 2015, Priority No. WO2015EP58082

    Research output: Patent

  96. Published

    Inkjet Printing of Soft, Stretchable Optical Waveguides through the Photopolymerization of High-Profile Linear Patterns

    Samusjew, A., Kratzer, M., Moser, A., Teichert, C. & Krawczyk, K., 17 Jan 2017, In: ACS Applied Materials & Interfaces. 9.2017, 5, p. 4941-4947 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  97. Published

    A Review of Multiscale Computational Methods in Polymeric Materials

    Gooneie, A., Schuschnigg, S. & Holzer, C., 9 Jan 2017, In: Polymers / Molecular Diversity Preservation International. 9.2017, 1, 80 p., 16.

    Research output: Contribution to journal › Article › Research › peer-review

  98. Published

    Comparative study of optimization in pultrusion with pre-heating and die-cooler temperature for improved cure

    Costa Dias, R. D. C., de Sousa Santos, L. & Schledjewski, R., 1 Jan 2017, THERMEC 2016. Ionescu, M., Mishra, B., Kozeschnik, E., Sommitsch, C., Chandra, T. & Mishra, B. (eds.). Trans Tech Publications, p. 402-407 6 p. (Materials Science Forum; vol. 879).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  99. Published

    Accelerated aging of polyethylene pipe grades in chlorine dioxide and hypochlorite solution applying a newly developed exposure device

    Bredács, M., Frank, A., Bastero, A. & Pinter, G., 2017, 75th Annual Technical Conference and Exhibition of the Society of Plastics Engineers, SPE ANTEC Anaheim 2017. Vol. 2017-May. p. 1960-1966 7 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  100. Published

    Additives for High Performance Applications

    Fink, J., 2017, Wiley-VCH .

    Research output: Book/Report › Book › Research

  101. Published

    Analyse des Risswachstumsverhaltens von Polybuten und vernetztem Polyethylen mittels dem zyklischen Cracked Round Bar- Test

    Höller, D., 2017

    Research output: Thesis › Master's Thesis

Previous 1...11 12 13 14 15 16 17 18 ...42 Next
View graph of relations

Contact information

Otto Glöckel-Straße 2, 8700 Leoben
  • Main phone number: +43 3842 402 2301