Department Physics, Mechanics and Electrical Engineering

Organisational unit: Departments and Institutes

401 - 500 out of 2,058Page size: 100

Research output

  1. 2018
  2. Published

    Exfoliation and characterization of natural two-dimensional magnetic flakes

    Gradwohl, K.-P., 2018

    Research output: Thesis › Master's Thesis

  3. Published

    Gewebe aus nanoporöser Aktivkohle

    Mitterer, C., Paris, O., Kostoglou, N. & Koczwara, C., 2018, In: Der Energietechniker. 2, p. 34-36

    Research output: Contribution to journal › Article › Research

  4. Published

    Gradient polymer composites for optimum heat dissipation

    Marx, P., Morak, M., Gschwandl, M., Fuchs, P., Antretter, T., Pfost, M., Kern, W. & Wiesbrock, F., 2018, In: Journal of the American Chemical Society. 2, 1 p., PMSE-772.

    Research output: Contribution to journal › Meeting Abstract

  5. Published

    Grain growth controlled by grain boundary and boundary junction migration

    Ogris, D. & Gamsjäger, E., 2018.

    Research output: Contribution to conference › Poster › Research › peer-review

  6. Published

    Growth morphologies of dihydro-tetraaza-acenes on c-plane sapphire: Englisch

    Matkovic, A., Cicek, A., Kratzer, M., Kaufmann, B., Thomas, A., Chen, Z., Siri, O., Becker, C. & Teichert, C., 2018, In: Surface Science. 678.2018, December, p. 128-135 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  7. Published

    Influene of accounting for translational motion of grains on grain growth kinetics and size distribution

    Svoboda, J. & Fischer, F.-D., 2018, In: Scripta materialia. 146, p. 225-259

    Research output: Contribution to journal › Article › Research › peer-review

  8. Published

    Ion charge storage in disordered nanoporous carbons

    Prehal, C., Koczwara, C. & Paris, O., 2018

    Research output: Other contribution › Research

  9. Published

    Kinetics of grain boundary networks controlled by triple junction and grain boundary mobility

    Gamsjäger, E., Ogris, D. & Svoboda, J., 2018, In: Metals : open access journal . 8, 977, p. 1 19 p.

    Research output: Contribution to journal › Article › Research › peer-review

  10. Published

    Kinetics of Grain Boundary Segregation in Multicomponent Systems – The Example of a Mo-C-B-O System

    Scheiber, D., Romaner, L., Fischer, F.-D. & Svoboda, J., 2018, In: Scripta materialia. 150, p. 110-114 5 p.

    Research output: Contribution to journal › Article › Research › peer-review

  11. Published

    Model Free Kinetics coupled with Finite Element Method for curing simulation of thermosetting epoxy resins

    Tao, Q., Pinter, G. G., Antretter, T., Krivec, T. & Fuchs, P., 2018, In: Journal of Applied Polymer Science. p. 1-8

    Research output: Contribution to journal › Article › Research › peer-review

  12. Published

    Modeling Dry Wear of Piston Rod Sealing Elements of Reciprocating Compressors Considering Gas Pressure Drop Across the Dynamic Sealing Surface

    Kaufmann, A., Lindner-Silwester, T. & Antretter, T., 2018, In: Journal of tribology (Transactions of the ASME).

    Research output: Contribution to journal › Article › Research › peer-review

  13. Published

    Nanoporous activated carbon cloth for H2 storage, selective CO2/CH4 separation and supercapacitor energy storage

    Kostoglou, N., Koczwara, C., Prehal, C., Babic, B., Tampaxis, C., Charalambopoulou, G., Steriotis, T., Polychronopoulou, K., Constantinides, G., Paris, O., Rebholz, C. & Mitterer, C., 2018.

    Research output: Contribution to conference › Poster › Research

  14. Published

    Nanoporous activated carbon cloth for H2 storage and selective CO2/CH4 separation

    Kostoglou, N., Koczwara, C., Babic, B., Polychronopoulou, K., Constantinides, G., Paris, O., Rebholz, C. & Mitterer, C., 2018.

    Research output: Contribution to conference › Poster › Research

  15. Published

    Numerical Analysis of Residual Stress and Crack Networks in CVD Multilayer Coated Cutting Tools

    Velic, D., 2018

    Research output: Thesis › Master's Thesis

  16. Published

    Surface energy of nanoparticles - influence of particle size and structures

    Vollath, D., Fischer, F.-D. & Holec, D., 2018, In: Beilstein journal of nanotechnology (Online-Ressource). 2018, 9, p. 2265-2276 12 p.

    Research output: Contribution to journal › Article › Research › peer-review

  17. Published

    Switching "on" and "off" the adhesion in stimuli-responsive elastomers

    Kaiser, S., Radl, S. V., Manhart, J., Ayalur-Karunakaran, S., Griesser, T., Moser, A., Ganser, C., Teichert, C., Kern, W. & Schlögl, S., 2018, In: Soft Matter. 14, 13, p. 2547-2559 13 p.

    Research output: Contribution to journal › Article › Research › peer-review

  18. Published

    The Influence of the Leveling Process on the Local Material Properties of Heavy Steel Plates

    Kaltenbrunner, T., 2018

    Research output: Thesis › Doctoral Thesis

  19. Published

    Twin boundary dominated electric field distribution in CdZnTe detectors

    Dong, J., Jie, W., Yu, J., Guo, R., Teichert, C., Gradwohl, K.-P., Zhang, B. B., Luo, X., Xi, S. & Xu, Y., 2018, In: Chinese physics : a publication of the Chinese Physical Society = Zhongguo-wuli. B. 2018, Vol 27 No. 11, p. 117202-1 117202 p.

    Research output: Contribution to journal › Article › Research › peer-review

  20. Published

    Ultrasonic Methods for Material and Failure Characterization

    Kozic, E. M., 2018

    Research output: Thesis › Doctoral Thesis

  21. 2017
  22. Published

    Complementary High Spatial Resolution Methods in Materials Science and Engineering

    Paris, O., Lang, D., LI, J., Schumacher, P., Deluca, M., Daniel, R., Tkadletz, M., Schalk, N., Mitterer, C., Todt, J., Keckes, J., Zhang, Z., Popovski, G., Ganser, C., Teichert, C. & Clemens, H., 31 Dec 2017, In: Advanced engineering materials. 19.2017, 4, 22 p., 1600671.

    Research output: Contribution to journal › Article › Research › peer-review

  23. Published

    Combining modeling and in situ X-ray scattering to quantify confinement and desolvation in nanoporous carbon supercapacitors: ELLETRA Highlights

    Prehal, C., Koczwara, C., Jäckel, N., Schreiber, A., Burian, M., Amenitsch, H., Hartmann, M. A., Presser, V. & Paris, O., 12 Dec 2017, In: ELETTRA Highlights. 2017

    Research output: Contribution to journal › Short survey

  24. Published

    EUV Bragg reflectors with photonic superlattices

    Meisels, R. & Kuchar, F., 11 Dec 2017, In: Optics express. 25.2017, 26, p. 32215-32226 12 p.

    Research output: Contribution to journal › Article › Research › peer-review

  25. Published

    Macroscopic versus microscopic photovoltaic response of heterojunctions based on mechanochemically prepared nanopowders of kesterite and n-type semiconductors

    Dimitriev, O. P., Grynko, D. O., Fedoryak, A. N., Doroshenko, T., Kratzer, M., Teichert, C., Noskov, Y., Ogurtsov, N., Pud, A., Balaz, P., Balaz, M. & Tesinsky, M., 7 Dec 2017, In: Semiconductor Physics, Quantum Electronics & Optoelectronics. 20.2017, 4, p. 418-423 6 p.

    Research output: Contribution to journal › Article › Research › peer-review

  26. Published

    Finite Element Based Optimization and Improvement of the Sucker Rod Pumping System

    Langbauer, C. & Antretter, T., 16 Nov 2017. 18 p.

    Research output: Contribution to conference › Paper › peer-review

  27. Published

    Simulation von EUV Spiegeln

    Meisels, R., 15 Nov 2017.

    Research output: Contribution to conference › Poster › Transfer

  28. Published

    Ion electrosorption in nanoporous carbons: WerWasWo Poster

    Prehal, C., 11 Nov 2017.

    Research output: Contribution to conference › Poster › Transfer

  29. Published

    Mechanik und Thermodynamik der Werkstoffe

    Gamsjäger, E., Nov 2017.

    Research output: Contribution to conference › Poster › Research › peer-review

  30. Published

    Au55, a stable glassy cluster: results of ab initio calculations

    Vollath, D., Holec, D. & Fischer, F.-D., 25 Oct 2017, In: Beilstein journal of nanotechnology . 8.2017, p. 2221-2229 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  31. Published

    Phase imaging and nanoscale energy dissipation of supported graphene using amplitude modulation atomic force microscopy

    Vasić, B., Matkovic, A. & Gajić, R., 23 Oct 2017, In: Nanotechnology. 28.2017, 46, 14 p., 465708.

    Research output: Contribution to journal › Article › Research › peer-review

  32. E-pub ahead of print

    Resolving alternating stress gradients and dislocation densities across AlxGa1-xN multilayer structures on Si(111)

    Reisinger, M., Tomberger, M., Zechner, J., Daumiller, I., Sartory, B., Ecker, W., Keckes, J. & Lechner, R. T., 16 Oct 2017, (E-pub ahead of print) In: Applied physics letters. 111.2017, 16, p. 162103 4 p.

    Research output: Contribution to journal › Article › Research › peer-review

  33. Published

    Deformation mechanisms in uniaxial-oriented semi-crystalline PET-films as a function of orientation to tensile direction

    Popovski, G., Feuchter, M. & Maier, G. A., 11 Oct 2017, In: Journal of polymer science : B, Polymer physics. 56.2018, 2, p. 159-169 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  34. Published

    The effect of residual stresses and strain reversal on the fracture toughness of TiAl alloys

    Appel, F., Paul, J., Staron, P., Oehring, M., Kolednik, O., Predan, J. & Fischer, F.-D., 7 Oct 2017, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 709.2018, 2 January, p. 17-29 13 p.

    Research output: Contribution to journal › Article › Research › peer-review

  35. Published

    Visible light emission in graphene field effect transistors

    Beltaos, A., Johan Bergren1, A., Bosnick, K., Pekas, N., Lane, S., Cui, K., Matkovic, A. & Meldrum, A., 28 Sept 2017, In: Nano Futures. 1.2017, 2, 11 p., 025004.

    Research output: Contribution to journal › Article › Research › peer-review

  36. Published

    Combining in situ small angle X-ray scattering and atomistic modelling to study ion charge storage in nanoporous carbon supercapacitors: SAXS Excites, TU Graz

    Prehal, C., Koczwara, C., Jäckel, N., Amenitsch, H., Hartmann, M. A., Presser, V. & Paris, O., 26 Sept 2017.

    Research output: Contribution to conference › Poster › Research

  37. Published

    Combined TEM and XPS studies of metal - polymer interfaces for space applications

    Putz, B., Milassin, G., Butenko, Y., Völker, B., Gammer, C., Semprimoschnig, C. & Cordill, M., 18 Sept 2017, In: Surface & coatings technology. 332.2017, 25 December, p. 368-375 6 p.

    Research output: Contribution to journal › Article › Research › peer-review

  38. Published

    Manifestation of many-body interactions in the integer quantum Hall effect regime

    Oswald, J. & Römer, R. A., 18 Sept 2017, In: Physical review : B, Condensed matter and materials physics. 96.2017, 12, 10 p., 125128.

    Research output: Contribution to journal › Article › Research › peer-review

  39. Published

    Biological fabrication of cellulose fibers with tailored properties

    Natalio, F., Fuchs, R., Cohen, S. R., Leitus, G., Fritz-Popovski, G., Paris, O., Kappl, M. & Butt, H.-J., 15 Sept 2017, In: Science. 357.2017, 6356, p. 1118-1122 5 p.

    Research output: Contribution to journal › Article › Research › peer-review

  40. Published

    Mapping the Atomistic Structure of Graded Core/Shell Colloidal Nanocrystals

    Yarema, M., Xing, Y., Lechner, R. T., Ludescher, L., Dordevic, N., Lin, W. M. M., Yarema, O. & Wood, V., 15 Sept 2017, In: Scientific reports (London : Nature Publishing Group). 7.2017, 1, 9 p., 11718.

    Research output: Contribution to journal › Article › Research › peer-review

  41. Published

    Setting Directions: Anisotropy in Hierarchically Organized Porous Silica

    Putz, F., Morak, R., Elsässer, M. S., Balzer, C., Braxmeier, S., Bernardi, J., Paris, O., Reichenauer, G. & Hüsing, N., 31 Aug 2017, In: Chemistry of materials. 29.2017, 18, p. 7969-7975 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  42. Published

    Probing charge transfer between molecular semiconductors and graphene

    Matkovic, A., Kratzer, M., Kaufmann, B., Vujin, J., Gajić, R. & Teichert, C., 25 Aug 2017, In: Scientific reports (London : Nature Publishing Group). 7.2017, 9 p., 9544.

    Research output: Contribution to journal › Article › Research › peer-review

  43. Published

    In Situ Measurement of Electrosorption-Induced Deformation Reveals the Importance of Micropores in Hierarchical Carbons

    Koczwara, C., Rumswinkel, S., Prehal, C., Jäckel, N., Elsässer, M. S., Amenitsch, H., Presser, V., Hüsing, N. & Paris, O., 19 Jul 2017, In: ACS Applied Materials and Interfaces. 9, 28, p. 23319-23324 6 p.

    Research output: Contribution to journal › Article › Research › peer-review

  44. Published

    Towards in situ determination of 3D strain and reorientation in interpenetrating nanofibre composites

    Zhang, Y., De Falco, P., Wang, Y., Barbierie, E., Paris, O., Teririll, N. J., Falkenberg, G., Pugno, N. M. & Gupta, H. S., 19 Jul 2017, In: Nanoscale. 9.2017, 31, p. 11249-11260 12 p.

    Research output: Contribution to journal › Article › Research › peer-review

  45. Published

    Wear properties of graphene edges probed by atomic force microscopy based lateral manipulation

    Vasić, B., Matkovic, A., Gajic, R. & Stankovic, I., 23 Jun 2017, In: Carbon. 107.2016, October, p. 723-732 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  46. Published

    In situ monitoring of nanomaterials for energy storage: Evaluierung Werkstoffwissenschaft

    Prehal, C., Koczwara, C., Lechner, R., Jäckel, N., Amenitsch, H., Presser, V. & Paris, O., 8 Jun 2017.

    Research output: Contribution to conference › Poster › Research

  47. Published

    Adsorption-Induced Deformation of Hierarchically Structured Mesoporous Silica Effect of Pore-Level Anisotropy

    Balzer, C., Waag, A., Gehret, S., Reichenauer, G., Putz, F., Hüsing, N., Paris, O., Bernstein, N., Gor, G. Y. & Neimark, A. V., 6 Jun 2017, In: Langmuir. 33.2017, 22, p. 5592-5602 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  48. Published

    Heteromolecular phases: Opposite interaction matters

    Teichert, C., 1 Jun 2017, In: Nature Materials. 16, 6, p. 604-606 3 p.

    Research output: Contribution to journal › Short survey › peer-review

  49. Published

    From microstructural characterization to mechanical properties of steels - An in-situ X-ray diffration study

    Gamsjäger, E. & Wießner, M., Jun 2017.

    Research output: Contribution to conference › Poster › Research › peer-review

  50. Published

    A carbon nanopore model to quantify structure and kinetics of ion electrosorption with in situ small-angle X-ray scattering

    Prehal, C., Koczwara, C., Jäckel, N., Amenitsch, H., Presser, V. & Paris, O., 31 May 2017, In: Physical chemistry, chemical physics : PCCP. 19.2017, 23, p. 15549-15561 13 p.

    Research output: Contribution to journal › Article › Research › peer-review

  51. E-pub ahead of print

    Compressed Bi-crystal micropillars showing a sigmoidal deformation state – A computational study

    Toth, F., Kirchlechner, C., Fischer, F.-D., Dehm, G. & Rammerstorfer, F. G., 26 May 2017, (E-pub ahead of print) In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 700.2017, 17 July, p. 168-174 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  52. Published

    Nanoscale wear of graphene and wear protection by graphene

    Vasić, B., Matkovic, A., Ralević, U., Belic, M. & Gajić, R., 11 May 2017, In: Carbon. 120.2017, August, p. 137-144 8 p., 137-144.

    Research output: Contribution to journal › Article › Research › peer-review

  53. Published

    Exchange-mediated dynamic screening in the integer quantum Hall effect regime

    Oswald, J. & Römer, R. A., 10 May 2017, In: epl. 117.2017, 5, 6 p., 57009.

    Research output: Contribution to journal › Article › Research › peer-review

  54. E-pub ahead of print

    Modelling of grain refinement driven by negative grain boundary energy

    Fischer, F.-D., Zickler, G. & Svoboda, J., 10 May 2017, (E-pub ahead of print) In: Philosophical magazine. 97.2017, 23, p. 1963-1977 15 p.

    Research output: Contribution to journal › Article › Research › peer-review

  55. E-pub ahead of print

    Microporous novolac-derived carbon beads/sulfur hybrid cathode for lithium-sulfur batteries

    Chourdhury, S., Krüner, B., Massuti-Ballester, P., Tolosa, A., Prehal, C., Grobelsek, I., Paris, O., Borchardt, L. & Presser, V., 9 May 2017, (E-pub ahead of print) In: Journal of power sources. 357.2017, 31. July, p. 198-208 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  56. E-pub ahead of print

    Anti-adhesive layers on stainless steel using thermally stable dipodal perfluoroalkyl silanes

    Kaynak, B., Alpan, C., Kratzer, M., Ganser, C., Teichert, C. & Kern, W., 25 Apr 2017, (E-pub ahead of print) In: Applied surface science. 416.2017, 15 September, p. 824-833 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  57. Published

    From Permeation to Cluster Arrays: Graphene on Ir(111) Exposed to Carbon Vapor

    Herbig, C., Knispel, T., Simon, S., Schröder, U. A., Martínez-Galera, A. J., Arman, M. A., Teichert, C., Knudsen, J., Krasheninnikov, A. V. & Michely, T., 20 Apr 2017, In: Nano Letters. 17.2017, 5, p. 3105-3112 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  58. Published

    Prediction and Characterization of Residual Stresses after Heat Treatment of Massive Hot Work Tool Steel Components

    Schemmel, M., Antretter, T., Ecker, W. & Prevedel, P., 19 Apr 2017.

    Research output: Contribution to conference › Presentation › Research › peer-review

  59. E-pub ahead of print

    Structure and surface energy of Au55 nanoparticles: An ab initio study

    Holec, D., Fischer, F.-D. & Vollath, D., 6 Apr 2017, (E-pub ahead of print) In: Computational materials science. 134.2017, 15 June, p. 137-144 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  60. Published

    Surface analysis of epitaxially grown GeSn alloys with Sn contents between 15% and 18%

    Kormoš, L., Kratzer, M., Kostecki, K., Oehme, M., Šikola, T., Kasper, E., Schulze, J. & Teichert, C., 1 Apr 2017, In: Surface and interface analysis. 49.2017, 4, p. 297-302 6 p.

    Research output: Contribution to journal › Article › Research › peer-review

  61. Published

    Porenschließverhalten beim mehrdirektionalen und mehrstufigen Freiformschmieden

    Kaiser, R., Tewes, A., Wieser, V. & Antretter, T., 18 Mar 2017, XXXVI. Verformungskundliches Kolloquium: Zauchensee von 18.3 bis 22.3.2017. Leoben: Montanuniversität Leoben, Lehrstuhl für Umformtechnik, p. 134 - 139 6 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  62. Published

    Solutions for Critical Raw Materials under Extreme Conditions: A Review

    Grilli, M. L., Bellezze, T., Gamsjäger, E., Rinaldi, A., Novák, P., Balos, S., Piticescu, R. R. & Ruello, M. L., 17 Mar 2017, In: Materials. 10.2017, 3, 23 p., 285.

    Research output: Contribution to journal › Review article › peer-review

  63. E-pub ahead of print

    Cold pilgering of duplex steel tubes: The response of austenite and ferrite to excessive cold deformation up to high strains

    Ragger, K., Primig, S., Daniel, R., Kaiser, R., Paal, J., Mitterer, C. & Buchmayr, B., 16 Mar 2017, (E-pub ahead of print) In: Materials characterization. 128.2017, June, p. 257–268 12 p.

    Research output: Contribution to journal › Article › Research › peer-review

  64. Published

    Modeling the interplay between transformation and plasticity in low-carbon steels - A micro-level constitutive model / RVE approach

    Petersmann, M., Antretter, T., Ehlenbröcker, U. & Cailletaud, G., 27 Feb 2017.

    Research output: Contribution to conference › Poster › Research

  65. Published

    Reversibility of temperature driven discrete layer-by-layer formation of dioctyl-benzothieno-benzothiophene films

    Dohr, M., Ehmann, H. M. A., Jones, A. O. F., Salzmann, I., Shen, Q., Teichert, C., Ruzié, C., Schweicher, G., Geerts, Y. H., Resel, R., Sferrazza, M. & Werzer, O., 27 Feb 2017, In: Soft Matter. 13.2017, 12, p. 2322-2329 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  66. Published

    Structure and kinetics of ions in nanoporous carbon supercapacitors studied by in situ X-ray scattering and atomistic modelling

    Prehal, C., Koczwara, C., Jäckel, N., Amenitsch, H., Presser, V. & Paris, O., 27 Feb 2017.

    Research output: Contribution to conference › Poster › Research

  67. E-pub ahead of print

    Intermetallic β-Solidifying γ-TiAl Based Alloys − From Fundamental Research to Application

    Mayer, S., Erdely, P., Fischer, F.-D., Holec, D., Kastenhuber, M., Klein, T. & Clemens, H., 23 Feb 2017, (E-pub ahead of print) In: Advanced engineering materials. 19.2017, 4, 27 p., 1600735.

    Research output: Contribution to journal › Article › Research › peer-review

  68. Published

    Werkzeug zur Ermittlung der Exergieeffizienz in Fernwärmesystemen

    Kriechbaum, L., Heinrich, D., Hammer, A. & Kienberger, T., 15 Feb 2017, Tagungsband der 10. Internationale Energiewirtschaftstagung: Klimaziele 2050: Chance für einen Paradigmenwechsel?.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  69. Published

    A new approach predicting the evolution of laminated nanostructures - Martensite in NiTi as an example

    Petersmann, M., Antretter, T., Waitz, T. & Fischer, F. D., 14 Feb 2017, In: Modelling and simulation in materials science and engineering. 25.2017, February, 17 p., 035004.

    Research output: Contribution to journal › Article › Research › peer-review

  70. Published

    Calibration of phase field parameters demonstrated on kinetics of a shrinking single grain

    Fischer, F.-D., Zickler, G. & Svoboda, J., 8 Feb 2017, In: Philosophical magazine : Letters. 97.2017, 3, p. 92-100 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  71. Published

    A combination of a viscoelastic material model with contact mechanics to study cellulosic materials with AFM

    Ganser, C., Czibula, C., Tscharnuter, D., Teichert, C. & Hirn, U., 5 Feb 2017.

    Research output: Contribution to conference › Poster › Research

  72. Published

    Incorporation of vacancy generation/annihilation into reactive diffusion concept – Prediction of possible Kirkendall porosity

    Svoboda, J. & Fischer, F.-D., 1 Feb 2017, In: Computational materials science. 127.2017, 1 February, p. 136-140 5 p.

    Research output: Contribution to journal › Article › Research › peer-review

  73. Published

    Quasi-epitaxial Metal-Halide Perovskite Ligand Shells on PbS Nanocrystals

    Sytnykt, M., Yakunin, S., Schoefberger, W., Lechner, R., Burian, M., Ludescher, L., Killilea, N. A., YousefiAmin, A., Kriegner, D., Stangl, J., Groiss, H. & Heiss, W., Feb 2017, In: ACS nano. 11.2017, 2, p. 1246-1256 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  74. Published

    An Energy Approach to Determine the Martensite Morphology in Nanocrystalline NiTi

    Petersmann, M., Pranger, W., Waitz, T. & Antretter, T., 31 Jan 2017, In: Advanced engineering materials. 19.2017, 4, 6 p., 1600684.

    Research output: Contribution to journal › Article › Research › peer-review

  75. Published

    Quantification of ion confinement and desolvation in nanoporous carbon supercapacitors with modelling and in situ X-ray scattering

    Prehal, C., Koczwara, C., Jäckel, N., Schreiber, A., Burian, M., Amenitsch, H., Hartmann, M. A., Presser, V. & Paris, O., 30 Jan 2017, In: Nature Energy. 2.2017, 16215.

    Research output: Contribution to journal › Article › Research › peer-review

  76. Published

    Atomistic modelling-based design of novel materials

    Holec, D., Zhou, L., Riedl, H., Koller, C., Mayrhofer, P. H., Friák, M., Šob, M., Körmann, F., Neugebauer, J., Music, D., Hartmann, M. A. & Fischer, F.-D., 17 Jan 2017, In: Advanced engineering materials. 19.2017, 4, 19 p., 1600688.

    Research output: Contribution to journal › Article › Research › peer-review

  77. Published

    Inkjet Printing of Soft, Stretchable Optical Waveguides through the Photopolymerization of High-Profile Linear Patterns

    Samusjew, A., Kratzer, M., Moser, A., Teichert, C. & Krawczyk, K., 17 Jan 2017, In: ACS Applied Materials & Interfaces. 9.2017, 5, p. 4941-4947 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  78. Published

    Werkzeug zur Ermittlung der Exergieeffizienz in Fernwärmesystemen

    Kriechbaum, L., Heinrich, D., Hammer, A. & Kienberger, T., 15 Jan 2017.

    Research output: Contribution to conference › Abstract › peer-review

  79. Published

    AFM based nanoindentation of cellulosic fibers

    Ganser, C. & Teichert, C., 2017, Applied Nanoindentation of Advanced Materials. Tiwari, A. & Natarajan, S. (eds.). Chichester: Wiley-VCH , p. 247-267

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  80. Published

    Application of Photons and Neutrons for the Characterization and Development of Advanced Steels

    Eidenberger-Schober, E., Schnitzer, R., Zickler, G., Eidenberger-Schober, M., Bischof, M., Staron, P., Leitner, H., Schreyer, A. & Clemens, H., 2017, Neutrons and Synchrotron Radiation in Engineering Materials Science : From Fundamentals to Applications. 2 ed. Wiley-VCH , p. 377-394

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  81. Published

    Austenite Grain Growth in a Microalloyed X80 Line Pipe Steel

    Tichauer, W., 2017

    Research output: Thesis › Master's Thesis

  82. Published

    A variational approach to the modelling of grooving in a three-dimensional setting

    Hackl, K., Fischer, F.-D. & Svoboda, J., 2017, In: Acta materialia. 129.2017, 1 May, p. 331-342 12 p.

    Research output: Contribution to journal › Article › Research › peer-review

  83. Published

    Beurteilung des Gefährdungspotentials von Porenbildung in Polymeren beim Einbetten elektronischer Komponenten in der Medizintechnik

    Prabitz, K., 2017

    Research output: Thesis › Master's Thesis

  84. Published

    Couples and Pairs Formation – Thermodynamic and Kinetic Modelling Applied to Al-Mg-Si

    Svoboda, J., Shan, Y. V., Kozeschnik, E. & Fischer, F.-D., 2017, In: Modelling and simulation in materials science and engineering. 25.2017, 15 p., 065011.

    Research output: Contribution to journal › Article › Research › peer-review

  85. Published

    Crack Driving Force in Twisted Plywood Structures

    Fischer, F.-D., Kolednik, O., Predan, J., Razi, H. & Fratzl, P., 2017, In: Acta biomaterialia. 55.2017, June, p. 349-359 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  86. Published

    Effects of hole-transport layer homogeneity in organic solar cells – A multi-length scale study

    Chien, H.-T., Pölzl, M., Koller, G., Challinger, S., Fairbairn, C., Baikie, I., Kratzer, M., Teichert, C. & Friedel, B., 2017, In: Surfaces and Interfaces. 6.2017, March, p. 72-80 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  87. Published

    Epitaxy of highly ordered conjugated organic semiconductors supported by hexagonal boron nitride

    Genser, J., Matkovic, A., Lüftner, D., Kratzer, M., Siri, O., Puschnig, P., Becker, C. & Teichert, C., 2017.

    Research output: Contribution to conference › Poster › Research

  88. Published

    Experimental and computational approach to evaluate the effect of leveling on the change of tensile properites of heavy steel plates

    Kaltenbrunner, T., Ecker, W., Antretter, T., Kaiser, R., Parteder, E. & Egger, R., 2017, AIP Conference Proceedings.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  89. Published

    Growth morphologies of the polar organic molecule dihydrotetraazaheptacene on graphene

    Lin, G., 2017

    Research output: Thesis › Diploma Thesis

  90. Published

    Growth of polar molecules on ultrathin hexagonal boron nitride

    Teichert, C., Genser, J., Matkovic, A., Kratzer, M., Gajic, R., Siri, O., Becker, C., Lüftner, D. & Puschnig, P., 2017.

    Research output: Contribution to conference › Poster › Research

  91. Published

    HYBRID SUPERCAP: Hybride Superkondensatoren durch innovative Materialkonzepte, O. Paris, Science Brunch Booklets 2017: Grundlagenforschung Photovoltaik + Speichermaterialien, S 40-45, Klima + Energiefonds, Wien 2017.

    Paris, O., 2017, 6 p.

    Research output: Other contribution › Research

  92. Published

    Investigating the transversal viscoelastic properties of paper fibers by Atomic Force Microscopy

    Czibula, C., Ganser, C., Tscharnuter, D., Schöberl, T., Teichert, C. & Hirn, U., 2017, Proceedings 4th International Conference in memory of Professor Valery Komarov. Kazakov, Y. (ed.). Arkhangelsk, p. 74-79

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  93. Published

    Ion assisted epitaxy: Methods, effects and applications

    Kasper, E. & Teichert, C., 2017, Proc. Int. Conf. on Integrated innovative development of the Zarafshan region: Achievements, challenges and prospects (IDZ). Navoi, Vol. 1. p. 221-223

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  94. Published

    Ion electrosorption in nanoporous carbons

    Prehal, C., 2017

    Research output: Thesis › Doctoral Thesis

  95. Published

    Lecture within the Training School: The challenge of CRMs in extreme condition: advanced multidisciplinary view

    Gamsjäger, E., 2017.

    Research output: Contribution to conference › Presentation › Research › peer-review

  96. Published

    Nanoporous activated carbon cloth as a versatile material for hydrogen adsorption, selective gas separation and electrochemical energy storage

    Kostoglou, N., Koczwara, C., Prehal, C., Terziyska, V., Babic, B., Matovic, B., Constantinides, G., Tampaxis, C., Charakambopoulou, G., Steriotis, T., Hinder, S., Baker, M., Polychronopoulou, K., Doumanidis, C. C., Paris, O., Mitterer, C. & Rebholz, C., 2017, In: Nano Energy. 40.2017, October, p. 49-64 16 p.

    Research output: Contribution to journal › Article › Research › peer-review

  97. Published

    Numerical analysis of the rock cutting process based on a two-parameter description of tensile strength

    Pittino, G., Galler, R., Antretter, T., Mikl-Resch, M. J., Tichy, R., Ecker, W., Gimpel, M. & Kargl, H., 2017, Proceedings of 13th ISRM International Congress of Rock Mechanics 2015. p. 1-6

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  98. Published

    Numerical simulation of stress-free shotcrete installation in the underground structures using finite element program ABAQUS

    Darmaev, E., Galler, R. & Antretter, T., 2017, Proceedings of the IV International Conference on Computational Methods in Tunneling and Subsurface Engineering: EURO:TUN 2017. Innsbruck, p. 339-346 8 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  99. Published

    Numerical study of the influence of irradiation parameters on the microwave-induced stresses in granite

    Toifl, M., Hartlieb, P., Meisels, R., Antretter, T. & Kuchar, F., 2017, In: Minerals engineering. 103-104.2017, April, p. 78-92 15 p.

    Research output: Contribution to journal › Article › Research › peer-review

  100. Published

    On Variants, Blocks and Packets and their Interaction with Crystal Plasticity

    Antretter, T., Petersmann, M., Cailletaud, G., Ehlenbröcker, U. & Vieweg, A., 2017.

    Research output: Contribution to conference › Presentation › Research › peer-review

  101. Published

    Optimization of a quick-release fastener for cutting discs in industrial mining applications

    Kernbichler, C., 2017

    Research output: Thesis › Master's Thesis

  102. Published

    Ordering of crystalline organic nanostructures on two-dimensional materials

    Teichert, C., Genser, J., Matkovic, A., Kratzer, M., Gajic, R., Léoni, T., Siri, O., Becker, C., Lüftner, D. & Puschnig, P., 2017, Book of Abstracts “Nanoscale Pattern Formation at Surfaces”, Helsinki, June 26-28 2017. p. 36-37

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

Previous 1 2 3 4 5 6 7 8 ...21 Next
View graph of relations