Department Physics, Mechanics and Electrical Engineering

Organisational unit: Departments and Institutes

851 - 900 out of 2,058Page size: 50

Research output

  1. 2013
  2. Published

    Modifications in the bulk and the surface of unbleached lignocellulosic fibers induced by heat treatment without water removal: effects on tensile properties of unrefined kraft pulp

    Schmied, F., 2013, In: European Journal of Wood and Wood Products. 71, p. 101-110

    Research output: Contribution to journal › Article › Research › peer-review

  3. Published

    Modified energetics and growth kinetics on H-terminated GaAs (110)

    Galiana, B., Benedicto, M., Díez-Merino, L., Lorbek, S., Hlawacek, G., Teichert, C. & Tejedor, P., 2013, In: Journal of chemical physics (The journal of chemical physics). 139, p. 164712-1-164712-7

    Research output: Contribution to journal › Article › Research › peer-review

  4. Published

    Modular Hardware for Universal Drive Control

    Weiß, H. & Kaserer, G., 2013.

    Research output: Contribution to conference › Poster › Research › peer-review

  5. Published

    Modular Hardware for Universal Drive Control

    Kaserer, G. & Weiß, H., 2013, EDPE 2013. p. 230-234

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  6. Published

    Novel aspects on the irradiation of HOPG surfaces with slow highly charged ions

    Ritter, R., Shen, Q., Wilhelm, R. A., Heller, R., Ginzel, R., López-Urrutia, C. J. R., Facsko, S., Teichert, C. & Aumayr, F., 2013, In: Nuclear instruments & methods in physics research / B Beam interactions with materials and atoms. 315, p. 252-256

    Research output: Contribution to journal › Article › Research › peer-review

  7. Published

    Numerical Simulations in the field of Geotechnics and Underground Engineering - Examples of Research and Development Projects

    Galler, R., Volderauer, C., Marcher, T., Kargl, H., Gimpel, M., Mikl, M., Ecker, W., Tichy, R., Antretter, T., Gschwandtner, G., Pittino, G., Entacher, M., Lorenz, S., Schuller, E. & Mödlhammer, H., 2013, In: Berg- und hüttenmännische Monatshefte : BHM. p. 189-197

    Research output: Contribution to journal › Article › Research › peer-review

  8. Published

    On the selection of active slip systems in rate independent crystal plasticity

    Orthaber, M., Antretter, T. & Gänser, H.-P., 2013, Key engineering materials. Vol. 554-557. p. 1147-1156 (Key engineering materials).

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  9. Published

    Open quantum dots: Physics of the non-Hermitian Hamiltonian

    Ferry, D. K., Akis, R., Burke, A., Knezevic, I., Brunner, R., Meisels, R., Kuchar, F. & Bird, J., 2013, In: Fortschritte der Physik [Elektronische Ressource]. 61, p. 291-304

    Research output: Contribution to journal › Article › Research › peer-review

  10. Published

    Optimization of Permanent Magnet Synchronous Machine Design

    Weiß, H., Aschenbrenner, F. & Czernin, W., 2013, EDPE 2013. p. 79-83

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  11. Published

    Oriented aggregation of calcium silicate hydrate platelets by the use of comb-like copolymers

    Nicoleau, L., Gädt, T., Chitu, L., Maier, G. & Paris, O., 2013, In: Soft Matter. 9, p. 4864-4874

    Research output: Contribution to journal › Article › Research › peer-review

  12. Published

    Photoresponse from single upright standing ZnO nanorods explored by photoconductive atomic force microscopy

    Beinik, I., Kratzer, M., Teichert, C., Wachauer, A., Wang, L., Pyriatinsky, Y. P., Brauer, G., Chen, X. Y., Hsu, Y. F. & Djurisic, A., 2013, In: Beilstein journal of nanotechnology . 4, p. 208-217

    Research output: Contribution to journal › Article › Research › peer-review

  13. Published

    Physico-Chemical Basis for Water Actuated Movement and Stress Generation in Non Living Plant Tissues

    Bertinetti, L., Fischer, F. D. & Fratzl, P., 2013, In: Physical review letters. 111, p. 238001-1-5

    Research output: Contribution to journal › Article › Research › peer-review

  14. Published

    Practical Experience and Consequences from 200 km Drive with Electric Vehicle Operated by Used Batteries

    Weiß, H. & Weiss, H. J., 2013, EDPE 2013. p. 83-89

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  15. Published

    Recent Progress in the Replication of Hierarchical Biological Tissues

    Paris, O., Popovski, G., Van Opdenbosch, D. & Zollfrank, C., 2013, In: Advanced functional materials. p. 1-15

    Research output: Contribution to journal › Article › Research › peer-review

  16. Published

    Role of Vacancies in Work Hardening and Fatigue of TiAl Alloys

    Appel, F., Herrmann, D., Fischer, F. D., Svoboda, J. & Kozeschnik, E., 2013, In: International journal of plasticity. 42, p. 83-100

    Research output: Contribution to journal › Article › Research › peer-review

  17. Published

    Self Assembling of Colloidal Nanocrystal Solids investigated by in-situ synchrotron SAXS studies

    Prehal, C., Amenitsch, H., Heiss, W., Yarema, M., Paris, O. & Lechner, R., 2013.

    Research output: Contribution to conference › Poster › Research › peer-review

  18. Published

    Shape Retrieval from Colloidal Nanocrystals by SAXS

    Burian, M., Yarema, M., Popovski, G., Amentisch, H., Heiss, W., Paris, O. & Lechner, R., 2013.

    Research output: Contribution to conference › Poster › Research › peer-review

  19. Published

    Sicheres Energieversorgungssystem mit PV - Überschusseinspeiser und örtliche Energiezwischenspeicherung in Batterien

    Steininger, D., 2013

    Research output: Thesis › Master's Thesis

  20. Published

    Six Phase Permanent Magnet Machine with Fractional Slot Concentrated Winding

    Krall, R., Krenn, J. & Weiss, H., 2013, Proceedings - EDPE 2013. p. 26-31

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  21. Published

    Some Examples for Advanced Numerical Solutions Pushing the Limits of Commercial Software

    Antretter, T., Hasenhütl, E., Eßl, W., Hofmann, A., Ecker, W., Heiss, C., Galler, R. & Parteder, E., 2013, In: Berg- und hüttenmännische Monatshefte : BHM. p. 211-214

    Research output: Contribution to journal › Article › Research › peer-review

  22. Published

    Structural and mechanical properties of the arthropod cuticle: Comparison between the fang of the spider Cupiennius salei and the carapace of American lobster Homarus americanus

    Erko, M., Hartmann, M., Zlotnikov, I., Valverde Serrano, C., Fratzl, P. & Politi, Y., 2013, In: Journal of structural biology. 183, p. 172-179

    Research output: Contribution to journal › Article › Research › peer-review

  23. Published

    STRUCTURE AND SORPTION ANALYSIS OF WOOD TEMPLATED CERAMIC

    Morak, R., Popovski, G., Van Opdenbosch, D., Zollfrank, C. & Paris, O., 2013.

    Research output: Contribution to conference › Poster › Research › peer-review

  24. Published

    Struktur- und Sorptionsanalyse von Holzkeramik

    Morak, R., 2013

    Research output: Thesis › Diploma Thesis

  25. Published

    Temperature dependent growth morphologies of parahexaphenyl on SiO2 supported exfoliated graphene

    Kratzer, M., Klima, S., Teichert, C., Gajić, R., Vasić, B., Matković, A. & Ralevic, U., 2013, In: Journal of vacuum science & technology / B (JVST). 31, p. 04D114-1-04D114-7

    Research output: Contribution to journal › Article › Research › peer-review

  26. Published

    The area in molecular contact in fiber-fiber bonds

    Hirn, U., Schennach, R., Ganser, C., Magnusson, M. S., Teichert, C. & Östlund, S., 2013, Advances in Pulp and Paper Research. p. 201-226

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  27. Published

    The density and distribution of sacrificial bonds in polymer chains determines the amount of dissipated energy

    Nabavi, S., 2013.

    Research output: Contribution to conference › Poster › Research › peer-review

  28. Published

    The mineralized crustacean cuticle – hierarchical structure and mechanical properties

    Paris, O., Hartmann, M. & Popovski, G., 2013, Materials Design Inspired by Nature: Function through Inner Architecture (Eds. Richard Weinkamer, J.W.C. Dunlop, and P. Fratzl), RSC Publishing (2013. p. 180-196

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  29. Published

    Thermodynamic analysis of solubility data 1: phase diagrams of systems salt hydrate + water

    Gamsjäger, H., Lorimer, J. W. & Gamsjäger, E., 2013, In: Monatshefte für Chemie = Chemical monthly. 144, p. 103-112

    Research output: Contribution to journal › Article › Research › peer-review

  30. Published

    Thermodynamic Modeling of a Phase Transformation in Protein Filaments with Mechanical Function

    Fischer, F. D., Harrington, M. J. & Fratzl, P., 2013, In: New journal of physics. 15, p. 065004-1-16

    Research output: Contribution to journal › Article › Research › peer-review

  31. Published

    Transformation hardening and kinetics for stress assisted and temperature driven transformation in steels

    Fischlschweiger, M., Antretter, T. & Cailletaud, G., 2013, In: Mechanics Research Communications. 47, p. 84-88

    Research output: Contribution to journal › Article › Research › peer-review

  32. Published

    Tribology of bio-inspired nanowrinkled films on ultrasoft substrates

    Lackner, J. M., Waldhauser, W., Major, L., Teichert, C. & Hartmann, P., 2013, In: Computational and structural biotechnology journal. 6, p. e201303002-12

    Research output: Contribution to journal › Article › Research › peer-review

  33. Published

    Tuning Kinetics to Control Droplet Shapes on Chemically Striped Patterned Surfaces

    Jansen, H. P., Sotthewes, K., Ganser, C., Teichert, C., Zandvliet, H. J. W. & Kooij, S., 2013, In: Journal of the American Chemical Society. p. 1-1

    Research output: Contribution to journal › Article › Research › peer-review

  34. Published

    Two-dimensional indirect Fourier transformation for evaluation of small-angle scattering data of oriented samples

    Fritz-Popovski, G., 2013, In: Journal of applied crystallography. 46, p. 1447-1454

    Research output: Contribution to journal › Article › Research › peer-review

  35. Published

    Verification of Mathematical Model of Complex Controlled Drive System through On-Site Measurement of Mechanical Signals

    Weiß, H., Bastos, I. & Hofstätter, H., 2013, EDPE 2013. p. 221-226

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  36. Published

    Verification of Mathematical Model of Complex Controlled Drive System through On-Site Measurement of Mechanical Signals

    Weiß, H., Bastos, I. & Hofstätter, H., 2013.

    Research output: Contribution to conference › Poster › Research › peer-review

  37. Published

    Voltage polarity dependent current paths through polycrystalline ZnO varistors

    Hofstätter, M., Nevosad, A., Teichert, C., Supancic, P. & Danzer, R., 2013, In: Journal of the European Ceramic Society. 33, p. 3473-3476

    Research output: Contribution to journal › Article › Research › peer-review

  38. Published

    Water melting induced deformation of ordered nanoporous silica

    Paris, O., 2013, ASCE Conference Proceedings of the Fifth Biot Conference on Poromechanics (Peer Reviewed Conference Proceedings). p. 755-761

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  39. Published

    What holds paper together: Nanometre scale exploration of bonding between paper fibres

    Schmied, F., Teichert, C., Kappel, L., Hirn, U., Bauer, W. & Schennach, R., 2013, In: Scientific reports (London : Nature Publishing Group). 3, p. 2432-1-2432-6

    Research output: Contribution to journal › Article › Research › peer-review

  40. Published

    X-ray based tools for the investigation of buried interfaces in organic electronic devices

    Neuhold, A., Brandner, H., Ausserlechner, S. J., Lorbek, S., Neuschitzer, M., Zojer, E., Teichert, C. & Resel, R., 2013, In: Organic electronics. 14, p. 479-487

    Research output: Contribution to journal › Article › Research › peer-review

  41. 2012
  42. Published

    Erratum: Electrical properties of ZnO nanorods studied by conductive atomic force microscopy (Journal of Applied Physics (2011) 110 (052005))

    Beinik, I., Kratzer, M., Wachauer, A., Wang, L., Lechner, R., Teichert, C., Motz, C., Anwand, W., Brauer, G., Chen, X. Y., Hsu, Y. F. & Djurišić, A. B., 1 Oct 2012, In: Journal of applied physics. 112.2012, 7, 1 p., 079903.

    Research output: Contribution to journal › Comment/debate › peer-review

  43. Published

    2D-Modellierung von thermomechanischen Ermüdungsvorgängen in Hochleistungsbremsscheiben für Bahnsysteme

    Schemmel, M., 2012, 91 p.

    Research output: Thesis › Diploma Thesis

  44. Published

    Active slip systems in crystal plasticity and the principle of maximum dissipation

    Orthaber, M., Antretter, T., Gänser, H.-P. & Ecker, W., 2012, Proceeding of the 5th International Conference from Scientific Computing to Computational Engineering. p. 36-41

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  45. Published

    Adhesive Power of Ultra High Performance Concrete from a Thermodynamic Point of View Read More: http://ascelibrary.org/doi/abs/10.1061/%28ASCE%29MT.1943-5533.0000481

    Teichert, C., Santner, G., Freytag, B. & Juhart, J., 2012, In: Journal of materials in civil engineering. 84, 8, p. 1050-1058

    Research output: Contribution to journal › Article › Research › peer-review

  46. Published

    A finite element unit cell model describing transformation induced plasticity

    Hasenhütl, E., 2012

    Research output: Thesis › Diploma Thesis

  47. Published

    AFM investigation of kraft pulp fiber swelling in controlled humidity

    Ganser, C., Schennach, R. & Teichert, C., 2012.

    Research output: Contribution to conference › Poster › Research › peer-review

  48. Published

    A mean-field model for transformation induced plasticity including backstress effects for non-proportional loadings

    Fischlschweiger, M., Cailletaud, G. & Antretter, T., 2012, In: International journal of plasticity. p. 53-71

    Research output: Contribution to journal › Article › Research › peer-review

  49. Published

    A MODERN COURSE IN VIBRATION OF RODS AND BEAMS

    Leindl, M., Oberaigner, E. & Mataln, M., 2012, Proceedings of the International Conference on Engineering Education 2012. p. 101-109

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  50. Published

    A MODERN COURSE IN VIBRATION OF RODS AND BEAMS

    Leindl, M., Oberaigner, E. & Mataln, M., 2012, International Conference on Engineering Education 2012, Abstract Book. p. 38-38

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  51. Published

    ANALYSIS OF ELASTIC WAVE PROPAGATION BY AN IMPROVED FINITE ELEMENT METHOD

    Leindl, M. & Oberaigner, E., 2012.

    Research output: Contribution to conference › Poster › Research › peer-review

  52. Published

    ANALYSIS OF ELASTIC WAVE PROPAGATION BY AN IMPROVED FINITE ELEMENT METHOD

    Leindl, M. & Oberaigner, E., 2012, Book of abstracts, EUROMECH COLLOQUIUM 540. p. 81-81

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

Previous 1...14 15 16 17 18 19 20 21 ...42 Next
View graph of relations