Department Mineral Resources Engineering

Organisational unit: Departments and Institutes

Research output

  1. 2023
  2. Published

    Einfluss von Kohlenstoff auf das Aufschmelzverhalten eines Gießpulvers bei hohen Heizraten

    Gruber, N., 25 Oct 2023, In: Berg- und hüttenmännische Monatshefte : BHM. 168.2023, 10, p. 521–526 6 p.

    Research output: Contribution to journalArticleResearch

  3. Published

    Der Aufbereiter Die Aufbereiterin 2023

    Flachberger, H., Hartig, G., Prem, D., Böhm, A., Penz, D., Öfner, W., Fimbinger, E., Friedrich, K., Kemper, D., Krukenfellner, P., Waldl, W., Zeismann, B. & Pölzl, C., 11 Oct 2023, Der Aufbereiter Die Aufbereiterin 2023.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  4. Published

    The effect of different rock mass properties on deformation distribution detected with intelligent rock bolts in underground mining

    Varelija, M., Nöger, M., Hartlieb, P., Dendl, D. & Moser, P., 10 Oct 2023. 6 p.

    Research output: Contribution to conferencePosterResearchpeer-review

  5. Published
  6. Published

    Unravelling calcite-to-aragonite evolution from a subsurface fluid - Formation pathway, interfacial reactions and nucleation effects

    Eichinger, S., Boch, R., Baldermann, A., Goetschl, K., Wenighofer, R., Hoffmann, R., Stamm, F., Hippler, D., Grengg, C., Immenhauser, A. & Dietzel, M., 9 Oct 2023, In: Chemical geology. 641.2023, 20 December, 32 p., 121768.

    Research output: Contribution to journalArticleResearchpeer-review

  7. Published

    Sicherung der Eigenversorgung Europas mit Schwerspat und Flussspat

    Prem, D. & Flachberger, H., Oct 2023, In: Stein & Kies (Mitgliederzeitung - Forum mineralische Rohstoffe). 186.2023, 09-10, p. 11 1 p.

    Research output: Contribution to journalArticleResearch

  8. Published

    Tectonic stresses as the cause of asymmetry and shape deviation of subsidence profiles

    Babaryka, A., 27 Sept 2023.

    Research output: Contribution to conferencePresentationResearch

  9. Published

    Die Zukunft der Prüfung und Entwicklung flexibler Steinschlagschutzsysteme am Prüf- und Forschungszentrum Erzberg

    Heiss, C., 25 Sept 2023, In: Berg- und hüttenmännische Monatshefte : BHM. 168.2024, 10, p. 497-501 5 p.

    Research output: Contribution to journalArticleResearch

  10. Published

    Study of the impact of hard rock pillar behavior on the raise caving mining system

    Gams, P., 25 Sept 2023, In: Berg- und hüttenmännische Monatshefte : BHM. 168.2023, October, p. 484-496 13 p., 10.

    Research output: Contribution to journalArticleResearch

  11. Published

    Analyzing crack deflection behavior of refractories by digital image correlation

    Fruhstorfer, J., Gruber, D. & Harmuth, H., 12 Sept 2023, In: AIP Conference Proceedings. 2894, 1, 020002.

    Research output: Contribution to journalConference articlepeer-review

  12. Published

    Loaded Failure Characteristics of Anthracite Derived from Microwave Irradiation: Acoustic Emission Evaluation

    Gao, Y., Zhao, Y., Wang, H., Liu, B., Hartlieb, P. & Gao, S., 5 Sept 2023, In: Rock mechanics and rock engineering. 56.2023, December, p. 8809-8831 23 p.

    Research output: Contribution to journalArticleResearchpeer-review

  13. Published

    DRI Materialuntersuchungen

    Prenner, M., Sept 2023, 17 p.

    Research output: Book/ReportCommissioned reportResearch

  14. Published

    Liquefaction Controlling Components and Their Effect on Carbon-Free Mold Powders

    Gruber, N., 30 Aug 2023, In: Metallurgical and materials transactions. B, Process metallurgy and materials processing science. 54.2023, December, p. pages 3092–3100 9 p.

    Research output: Contribution to journalArticleResearchpeer-review

  15. Published

    Molasse re-use potentials, based on the outcome of the "Mining the Future" international, challenge-based competition

    Hauzinger, E., Schneider, D., Galler, R., Ulrici, L., Gutleber, J. & Charitos, P., 18 Aug 2023, WP3 Deliverable: FCCIS Mid-term Report 2023. p. 1-15 15 p.

    Research output: Chapter in Book/Report/Conference proceedingOther chapter contributionResearch

  16. Published

    A breakage model for DEM based on a probabilistic particle replacement with Voronoi fragments

    Denzel, M., Prenner, M., Sifferlinger, N. A. & Antretter, T., 17 Aug 2023, In: Minerals engineering. 203.2023, November, 14 p., 108328.

    Research output: Contribution to journalArticleResearchpeer-review

  17. E-pub ahead of print

    A breakage model for DEM based on a probabilistic particle replacement with Voronoi fragments

    Denzel, M., Prenner, M., Sifferlinger, N. A. & Antretter, T., 17 Aug 2023, (E-pub ahead of print) In: Minerals engineering. 203.2023, November, 14 p., 108328.

    Research output: Contribution to journalArticleResearchpeer-review

  18. E-pub ahead of print

    Ti40Zr10Cu36Pd14 bulk metallic glass as oral implant material

    Rezvan, A., Sharifikolouei, E., Soprunyuk, V., Schranz, W., Todt, J., Lassnig, A., Gammer, C., Sifferlinger, N. A., Asci, A., Okulov, I., Schlögl, S., Keckes, J., Najmi, Z., Cochis, A., Scalia, A. C., Rimondini, L., Sarac, B. & Eckert, J., 16 Aug 2023, (E-pub ahead of print) In: Materials and Design. 233.2023, 10 p., 112256.

    Research output: Contribution to journalArticleResearchpeer-review

  19. Published
  20. Published

    Feststoffturbine zur Reduzierung von Entmischungseffekten

    Denzel, M., Prenner, M. & Sifferlinger, N. A., Aug 2023, In: Bergbau : Zeitschrift für Rohstoffgewinnung, Energie, Umwelt. 74.2023, 8, p. 292-298 7 p.

    Research output: Contribution to journalArticleResearch

  21. Published

    Digitalization in the Construction Industry: The Case of Documentation and Invoicing in Tunneling

    Melnyk, O., Huymajer, M., Huemer, C. & Galler, R., 25 Jul 2023, 2023 IEEE 25th Conference on Business Informatics (CBI), Prague, Czech Republic, 2023. p. 1-10

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  22. Published

    Dissolution of Magnesia in Silicate Melts and Diffusivity Determination from CLSM Studies

    Burhanuddin, B. & Harmuth, H., 21 Jul 2023, In: Applied Sciences : open access journal. 13.2023, 14, p. 8458 8 p., 8458.

    Research output: Contribution to journalArticleResearchpeer-review

  23. E-pub ahead of print

    Morphology characterization for refractory aggregates

    Wu, M. & Jin, S., 14 Jul 2023, (E-pub ahead of print) In: Open ceramics. 15.2023, September, 7 p., 100408.

    Research output: Contribution to journalArticleResearchpeer-review

  24. Published

    Characterizing lithological, weathering, and hydrothermal alteration influences on volcanic rock properties via spectroscopy and laboratory testing: a case study of Mount Ruapehu volcano, New Zealand

    Schaefer, L. N., Kereszturi, G., Kennedy, B. & Villeneuve, M., 13 Jul 2023, In: Bulletin of volcanology. 85.2023, 8, 29 p., 43.

    Research output: Contribution to journalArticleResearchpeer-review

  25. Published

    Carbon produced by methane plasmalysis - a potential soil amendment?

    Abu Zahra, N., Bandoniene, D., Fernández Balado, C., Kanzler, V., Hood-Nowotny, R., Soja, G., Obenaus-Emler, R., Wagner, S., Puschenreiter, M. & Prohaska, T., 10 Jul 2023.

    Research output: Contribution to conferencePosterResearch

  26. Published

    Processing of carbon produced by methane pyrolysis

    Hartig, G., 10 Jul 2023.

    Research output: Contribution to conferencePosterResearch

  27. Published

    Definition of Sustainability: a clear pathway for humankind?

    Griebler, A., 6 Jul 2023.

    Research output: Contribution to conferencePosterResearchpeer-review

  28. E-pub ahead of print

    A comparative case-study on social and public administration aspects on mineral deposits safeguarding in chosen European countries

    Gałaś, A., Kot-Niewiadomska, A., Simic, V., Tost, M., Warell, L. & Gałaś, S., 5 Jul 2023, (E-pub ahead of print) In: Resources Policy. 85.2023, August Part B, 11 p., 103863.

    Research output: Contribution to journalArticleResearchpeer-review

  29. Published

    Calculation of mass transfer for rotating finger test equipment

    Burhanuddin, B., Harmuth, H. & Guarco, J., 4 Jul 2023.

    Research output: Contribution to conferencePresentationResearch

  30. Published

    Lithium und Cobalt – Chancen und Probleme in Bezug auf zwei kritische Rohstoffe in der EU

    Lughofer, C. & Tost, M., 4 Jul 2023, In: Berg- und hüttenmännische Monatshefte : BHM. 168.2023, June, p. 305-308 4 p.

    Research output: Contribution to journalArticleResearch

  31. Published

    Automated translation from domain knowledge to software model: EXCEL2UML in the tunneling domain

    Paskaleva, G., Mazak-Huemer, A., Villeneuve, M. & Waldhart, J., Jul 2023, In: Journal of information technology in construction. 28.2023, July, p. 360-384 25 p.

    Research output: Contribution to journalArticleResearchpeer-review

  32. Published

    Cross Flow Turbine to Reduce Size Segregation Effects in Storage Processes

    Prenner, M., Denzel, M. & Sifferlinger, N. A., Jul 2023, Proceedings of ICBMH2023 - The 14th International Conference on Bulk Materials Storage, Handling and Transportation. 10 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  33. Published

    Monitoring System for Belt Conveyors

    Prenner, M., Müller, J. & Denzel, M., Jul 2023, Proceedings of ICBMH2023 - The 14th International Conference on Bulk Materials Storage, Handling and Transportation. 10 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  34. Published

    Paving the way for sustainable consumption and production patterns through research of a European University Alliance

    Kircher, V., Moser, P., Feiel, S. & Griebler, A., Jul 2023, p. 378-379. 2 p.

    Research output: Contribution to conferenceAbstractpeer-review

  35. Published

    The SUMEX Project - a European vision on sustainable mining

    Tost, M., Endl, A., Streit, S., Tyrologou, P. & Gugerell, K., 29 Jun 2023, Resourcing Tomorrow - Creating Value for Society - Proceedings.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  36. Published

    Virtual Coring While Drilling

    Ungerer, K. & Hartlieb, P., 27 Jun 2023.

    Research output: Contribution to conferencePosterResearch

  37. Published

    Assessing the environmental impact of mining - A holistic data driven approach for quarrying operations

    Sánchez, F., Lee, C., Hartlieb, P. & Asbjörnsson, G., 26 Jun 2023.

    Research output: Contribution to conferencePaperpeer-review

  38. Published

    Electric passenger cars, a climate benefit?

    Griebler, A., 12 Jun 2023.

    Research output: Contribution to conferencePosterResearchpeer-review

  39. Published

    Evaluation of Slag Foaming Behavior Using Renewable Carbon Sources in Electric Arc Furnace-Based Steel Production

    Kieush, L., Schenk, J., Koveria, A., Hrubiak, A., Hopfinger, H. & Zheng, H., 12 Jun 2023, In: Energies. 16.2023, 12, 25 p., 4673.

    Research output: Contribution to journalArticleResearchpeer-review

  40. E-pub ahead of print

    Nanoscale toughening of low carbon Al2O3-C refractories by means of SiCnw/Al2O3 composite reinforcement

    Chong, X., Luo, J., Ding, D., Jin, S. & Xiao, G., 9 Jun 2023, (E-pub ahead of print) In: Journal of the American Ceramic Society. 106.2023, 11, p. 6891-6910 20 p.

    Research output: Contribution to journalArticleResearchpeer-review

  41. Published

    Spatially resolved photoactivation of dynamic exchange reactions in 3D-printed thiol-ene vitrimers

    Reisinger, D., Hellmayr, A., Paris, M., Haas, M., Grießer, T. & Schlögl, S., 7 Jun 2023, In: Polymer Chemistry. 14.2023, 26, p. 3082-3090 9 p.

    Research output: Contribution to journalArticleResearchpeer-review

  42. Published

    Fibre-Reinforced Concrete Segments - From Laboratory to Large -Scale Tests

    Galler, R., Wenighofer, R., Evangelatos, A. & Kühbacher, M., 1 Jun 2023, In: Tunnel. 2023, 6, p. 12-20 9 p.

    Research output: Contribution to journalArticleResearch

  43. Published

    Guidelines to decrease sinter quality degradation along the transfer to the blast furnace

    Denzel, M., Prenner, M. & Sifferlinger, N. A., Jun 2023, 21 p.

    Research output: Book/ReportCommissioned reportResearch

  44. Published

    ReSoURCE: Ein Projekt um die Wertschöpfungskette in der Feuerfestindustrie zu schließen

    Flachberger, H., Friedrich, K., Feucht, F., Pomberger, R., Sedlazeck, K. P., Heid, S., Königshofer, S. & Leitner, A., Jun 2023, In: Stein & Kies (Mitgliederzeitung - Forum mineralische Rohstoffe). 184.2023, 05-06, p. 11 1 p.

    Research output: Contribution to journalArticleResearch

  45. E-pub ahead of print

    A methodology for performing and evaluating miniaturized wedge splitting tests accompanied by digital image correlation

    Fruhstorfer, J. & Gruber, D., 30 May 2023, (E-pub ahead of print) In: Engineering Fracture Mechanics. 288.2023, 4 August, 15 p., 109357.

    Research output: Contribution to journalArticleResearchpeer-review

  46. Published

    Full scale tests on steel and synthetic fiber reinforced tunnel lining segments

    Kühbacher, M., Galler, R. & Huß, M., 29 May 2023, -.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  47. Published

    Fibre-reinforced concrete tunnel linings: Steel and synthetic fibres as a sustainable reinforcement

    Evangelatos, A., 23 May 2023.

    Research output: Contribution to conferencePosterResearch

  48. E-pub ahead of print

    Creep strain recovery of an in situ spinel-forming refractory castable under loading/unloading compressive creep conditions

    Akbari, B., Gruber, D., Jin, S. & Harmuth, H., 17 May 2023, (E-pub ahead of print) In: Ceramics International. 49.2023, 15, p. 25225-25231 7 p.

    Research output: Contribution to journalArticleResearchpeer-review

  49. Published

    On the predictability of the cutting forces of small, longitudinal cutter heads

    Berner, M., Sifferlinger, N. A. & Gerer, R., 11 May 2023, Proceedings of the 15th International Symposium of Continuous Surface Mining 2023. Freiberg, 14 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  50. Published

    Digital translation technology: A translation scenario in university teaching in the field of mechanical engineering

    Hutterer, C. M. & Fimbinger, E., 10 May 2023. 5 p.

    Research output: Contribution to conferencePaperpeer-review

  51. E-pub ahead of print

    Determination of cohesion and friction angle of a MgO-C refractory at room and elevated temperatures

    Klopf, M. & Gruber, D., 9 May 2023, (E-pub ahead of print) In: Open ceramics. 14.2023, June, 6 p., 100369.

    Research output: Contribution to journalArticleResearchpeer-review

Previous 1 2 3 4 5 6 7 8 ...71 Next