Department Materials Science

Organisational unit: Departments and Institutes

5251 - 5300 out of 5,456Page size: 50

Research output

  1. 2004
  2. Published

    Gefügeentwicklung bei der thermischen Nachbehandlung rasch erstarrter Schnellarbeitsstähle

    Stotter, C., Leitner, H., Ebner, R., Ramminger, P. & Brandstätter, E., 2004, In: Berg- und hüttenmännische Monatshefte : BHM. 149, p. 244-248

    Research output: Contribution to journal › Article › Research › peer-review

  3. Published

    High resolution studies of epitaxially grown sexiphenyl on TiO2(110)

    Resel, R., Lengyel, O., Oehzelt, M., Eiper, E., Keckes, J., Krenn, J., Koller, G., Berkebile, S. & Ramsey, M., 2004.

    Research output: Contribution to conference › Poster › Research › peer-review

  4. Published

    Hole doping and inhomogeneous charge distribution in high Tc cuprates investigated from first principles

    Ambrosch-Draxl, C., Sherman, E. Y., Auer, H. & Thonhauser, T., 2004, In: Journal of superconductivity. 17, p. 215-215

    Research output: Contribution to journal › Article › Research › peer-review

  5. Published

    Influence of the Processing Parameters at High Pressure Torsion

    Hebesberger, T., Vorhauer, A., Stüwe, H.-P. & Pippan, R., 2004, Proceedings of the Conference "Nanomaterials by Severe Plastic Deformation - NANOSPD2". p. 447-452

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  6. Published

    In-situ strain mapping and orientation image microscopy of metal deformation

    Cuddy, H., Motz, C., You, X., Connolley, T. & McHugh, P. E., 2004.

    Research output: Contribution to conference › Poster › Research › peer-review

  7. Published

    In-situ Synchrotron Studies of Structural Changes in Wood during Microtensile Tests

    Keckes, J., Burgert, I., Müller, M., Kölln, K., Hamilton, M., Burghammer, M., Roth, S. V., Stanzl-Tschegg, S. & Fratzl, P., 2004, Proceedings of the 2nd International Symposium on Wood Machining. BOKU - Univ. of Natural Resources [u.a.], p. 37-44

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  8. Published

    In-situ WAXS studies of structural changes in wood foils and individual wood cells during microtensile tests

    Keckes, J., Burgert, I., Müller, M., Kölln, K., Roth, S. V., Hamilton, M., Burghammer, M., Stanzl-Tschegg, S. & Fratzl, P., 2004.

    Research output: Contribution to conference › Poster › Research › peer-review

  9. Published

    Lithiation of InSb and Cu2Sb: a theoretical investigation

    Sharma,, S., Dewhurst, J. K. & Draxl, C., 2004, In: Physical review : B, Condensed matter and materials physics. 70, p. 104110-1-104110-5

    Research output: Contribution to journal › Article › Research › peer-review

  10. Published

    Local deformation processes and damage evolution in MMCs

    Unterweger, K. & Kolednik, O., 2004, Proceedings of the 11th European Conference on Composite Materials. ESCM, European Society for Composite Materials, p. 1-18

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  11. Published

    Low Thermal Conductivity Ceramics for Turbine Blade thermal Barrier Coating Application

    Börger, A., Danzer, R., Schulz, U., Saint-Raimond, B., Lavigne, O., Moretto, P. & Van Lieshout, A., 2004, Ceramic Engineering and Science Proceedings. p. 375-381

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  12. Published

    Measurement of local mechanical properties in pyrolysed wood

    Schöberl, T., Zickler, G. A., Paris, O. & Zollfrank, C., 2004.

    Research output: Contribution to conference › Poster › Research › peer-review

  13. Published

    Mechanical model for the deformation of the wood cell wall

    Fratzl, P., Burgert, I. & Keckes, J., 2004, In: Zeitschrift für Metallkunde : international journal of materials research and advanced techniques. 95, p. 579-584

    Research output: Contribution to journal › Article › Research › peer-review

  14. Published

    Mechanical properties of spruce wood cell walls by nanoindentation

    Gindl, W., Gupta, H. S., Schöberl, T., Lichtenegger, H. C. & Fratzl, P., 2004, In: Applied physics / A (Series A, Materials science & processing). 79, p. 2069-2073

    Research output: Contribution to journal › Article › Research › peer-review

  15. Published

    Mechanical Variability of the S2 Layer in Wood Cell Walls by Nanoindentation

    Gindl, W., Gupta, H. S., Schöberl, T. & Lichtenegger, H. C., 2004, Proceedings of the 2nd International Symposium on Wood Machining. BOKU - Univ. of Natural Resources [u.a.], p. 45-51

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  16. Published

    Metallographische Präparationsmethoden für die Rasterkraftmikroskopie - Rasterkraft-mikroskopie als Werkzeug für die Materialographie

    Schöberl, T., 2004, In: Practical metallography = Praktische Metallographie. 41, p. 321-333

    Research output: Contribution to journal › Article › Research › peer-review

  17. Published

    Microfibril angle in wood: characterisation using X-ray scattering and influence on mechanical properties

    Keckes, J., Burgert, I., Lichtenegger, H., Reiterer, A., Stanzl-Tschegg, S. & Fratzl, P., 2004, Proceedings of COST Action E20, Wood Fibre Cell Wall Structure. p. 189-202

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  18. Published

    Microstructural characterization of deformed volume beneath microindentations using FIB, EBSD and TEM

    Motz, C., Kiener, D., Kreuzer, H., Prantl, W. & Pippan, R., 2004, Proceedings of the 25th Risø International Symposium on Materials Science: Evolution of Deformation Microstructures in 3D. p. 459-464

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  19. Published

    Microstructure and Thermal Stability of Tungsten based Materials after Severe Plastic Deformation

    Vorhauer, A., Knabl, W. & Pippan, R., 2004, Proceedings of the Conference "Nanomaterials by Severe Plastic Deformation - NANOSPD2". p. 648-653

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  20. Published

    Modification of the Microstructure of Severely Deformed Steels

    Wetscher, F., Stock, R. & Pippan, R., 2004.

    Research output: Contribution to conference › Poster › Research › peer-review

  21. Published

    Nanostructural design of hard thin films

    Mayrhofer, P. H., 2004

    Research output: Thesis › Habilitation thesis › peer-review

  22. Published

    Nanostructured Materials produced by severe plastic deformation

    Stüwe, H.-P., 2004, Metallic Materials with High Structural Efficiency. Kluwer Academic Publishers, p. 47-54

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  23. Published

    Numerical studies of crack sensitivity under continuous casting conditions

    Böhm, H. J., Duschlbauer, D., Drabek, T., Kolednik, O. & Shan, G. X., 2004, Continuous Casting and Hot-Rolling Conference, CCR'04, Paper No. 6.2. p. ?-?

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  24. Published

    On the homogeneity of deformation by high pressure torsion

    Vorhauer, A. & Pippan, R., 2004, In: Scripta materialia. 51, p. 921-925

    Research output: Contribution to journal › Article › Research › peer-review

  25. Published

    On the Lowest Optical Excitations in Molecular Crystals: Bound Excitons versus Free Electron-Hole Pairs in Anthracene

    Hummer, K., Puschnig, P. & Draxl, C., 2004, In: Physical review letters. 92, p. 147402-1-147402-4

    Research output: Contribution to journal › Article › Research › peer-review

  26. Published

    On the Precipitation Behavior of a Ni and Alloyed Martensitic Tool Steel

    Erlach, S., Danoix, F., Lemarchand, D., Leitner, H., Bischof, M. A., Siller, I. & Clemens, H., 2004, MS&T 2004 Conference Proceedings . p. 633-641

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  27. Published

    Optical properties and Raman scattering of vanadium ladder compounds

    Spitaler, J., Sherman, E. Y., Ambrosch-Draxl, C. & Evertz, H. G., 2004, In: Physica scripta. T109, p. 159-159

    Research output: Contribution to journal › Article › Research › peer-review

  28. Published

    Optical properties, lattice dynamics, and Raman scattering of vanadium ladder compounds

    Spitaler, J., Sherman, E. Y., Ambrosch-Draxl, C. & Evertz, H. G., 2004, In: Physical review : B, Condensed matter and materials physics. 70, p. 125107-125107

    Research output: Contribution to journal › Article › Research › peer-review

  29. Published

    Osteoporosis and local variations in Material Properties

    Weber, M., Roschger, P., Reeve, J., Loveridge, N., Fratzl, P. & Klaushofer, K., 2004.

    Research output: Contribution to conference › Poster › Research › peer-review

  30. Published

    Pressure-Induced Hole Doping of the Hg-Based Cuprate Superconductors

    Ambrosch-Draxl, C., Sherman, E. Y., Auer, H. & Thonhauser, T., 2004, In: Physical review letters. 92, p. 187004-1-187004-4

    Research output: Contribution to journal › Article › Research › peer-review

  31. Published

    Pulsed laser decomposition of silicon containing carbon thin films

    Lackner, J. M., Waldhauser, W., Ebner, R., Fian, A., Jakopic, G., Leising, G. & Schöberl, T., 2004, In: Surface & coatings technology. 177-178, p. 360-364

    Research output: Contribution to journal › Article › Research › peer-review

  32. Published

    Pulsed laser decomposition of titanium oxide coatings at room temperature - structural and tribological properties

    Lackner, J. M., Waldhauser, W., Ebner, R., Major, B. & Schöberl, T., 2004, In: Surface & coatings technology. 180-181, p. 585-590

    Research output: Contribution to journal › Article › Research › peer-review

  33. Published

    Raman scattering of vanadium ladder compounds from first principles

    Spitaler, J., Sherman, E. Y. & Draxl, C., 2004, In: Physica status solidi / B. 1, p. 3146-3146

    Research output: Contribution to journal › Article › Research › peer-review

  34. Published

    Residual stresses and size-strain phenomena in thermally cycled Cu layers on anisotropical SiO2(110) substrates

    Eiper, E., Hafok, M., Eisenmenger-Sittner, C. & Keckes, J., 2004.

    Research output: Contribution to conference › Poster › Research › peer-review

  35. Published

    Room temperature deposition of (Ti,Al)N and (Ti,Al)(C,N) coatings by pulsed laser deposition for tribological applications

    Lackner, J. M., Waldhauser, W., Ebner, R., Keckes, J. & Schöberl, T., 2004, In: Surface & coatings technology. 177-178, p. 447-452

    Research output: Contribution to journal › Article › Research › peer-review

  36. Published

    Room temperature pulsed laser deposited (Ti,Al)CxN1-x coatings-chemical, structural, mechanical and tribological properties

    Lackner, J. M., Waldhauser, W., Ebner, R., Bakker, R. J., Schöberl, T. & Major, B., 2004, In: Thin solid films. 468.2004, 1. December, p. 125-133 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  37. Published

    SAXS experiemtns on Y-ZrO powders and solutions using the NanoSTAR

    Görgl, R. & Dehm, G., 2004

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  38. Published

    SAXS experiments on Brij400 gels using the NanoSTAR

    Görgl, R. & Dehm, G., 2004

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  39. Published

    SAXS experiments on Ni-alloys using the nanoSTAR

    Görgl, R. & Dehm, G., 2004

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  40. Published

    Second-harmomic optical response from first-principles

    Sharma, S. & Draxl, C., 2004, In: Physica scripta. T109, p. 128-128

    Research output: Contribution to journal › Article › Research › peer-review

  41. Published

    Short cracks: A problem for the life-time prediction

    Pippan, R., 2004, Proceedings of the 22nd CAD-FEM Users' Meeting 2004. p. ?-?

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  42. Published

    Simulation of nanoindentation: a discrete dislocation study

    Kreuzer, H. G. M. & Pippan, R., 2004.

    Research output: Contribution to conference › Poster › Research › peer-review

  43. Published

    Simultaneous evaluation of elastic and thermal strains in thermally-cycled thin films

    Keckes, J., 2004.

    Research output: Contribution to conference › Poster › Research › peer-review

  44. Published

    Small Angle X-Ray Scattering (SAXS) of Novel Pd Bionanocatalysts

    Aichmayer, B., Jäger, I., Mertig, M., Paris, O. & Fratzl, P., 2004.

    Research output: Contribution to conference › Poster › Research › peer-review

  45. Published

    Small Angle X-Ray Scattering with Cobalt Radiation for Nanostructure Characterization of Fe-Based Specimen

    Erlacher, K., Görgl, R., Keckes, J., Jakob, H., Bruegemann, L., Doppler, P., Bermann, A., Leitner, H., Marsoner, S. & Fratzl, P., 2004, In: Materials Science Forum . 443-444, p. 155-158

    Research output: Contribution to journal › Article › Research › peer-review

  46. Published

    SPD für technische Werkstoffe: Stahl

    Pippan, R., 2004.

    Research output: Contribution to conference › Poster › Research › peer-review

  47. Published

    Sputter-deposited Al-Au coatings

    Mitterer, C., Lenhart, H., Mayrhofer, P. H. & Kathrein, M., 2004, In: Intermetallics. 12, p. 579-587

    Research output: Contribution to journal › Article › Research › peer-review

  48. Published

    Structural changes of severely plastic deformed rail steel

    Wetscher, F., Stock, R., Tian, B. & Pippan, R., 2004, Proceedings of Symposium, Ultrafine Grained Materials III, TMS 2004. p. 315-320

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  49. Published

    Structural, mechanical and tribological investigations of pulsed laser deposited titanium nitride coatings

    Lackner, J. M., Waldhauser, W., Berghauser, R., Ebner, R., Major, B. & Schöberl, T., 2004, In: Thin solid films. 453-454, p. 195-202

    Research output: Contribution to journal › Article › Research › peer-review

  50. Published

    Structural refinement of low alloyed steels during severe plastic deformation

    Wetscher, F., Vorhauer, A., Stock, R. & Pippan, R., 2004, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 387-389, p. 806-816

    Research output: Contribution to journal › Article › Research › peer-review

  51. Published

    Structure-function relationships of four compression wood types: micromechanical properties at the tissue and fibre level

    Burgert, I., Frühmann, K., Keckes, J., Fratzl, P. & Stanzl-Tschegg, S., 2004, In: Trees : structure and function. 18, p. 480-485

    Research output: Contribution to journal › Article › Research › peer-review

Previous 1...102 103 104 105 106 107 108 109 110 Next
View graph of relations

Contact information

Roseggerstraße 12 / Max-Tendler-Straße 9/1.UG, 8700 Leoben