Chair of Simulation and Modelling of Metallurgical Processes (310)

Organisational unit: Chair

351 - 400 out of 624Page size: 50

Research output

  1. 2013
  2. Published

    “Simultaneous observation of melt flow and motion of equiaxed crystals during solidification using a dual phase Particle Image Velocimetry technique. Part I

    Kharicha, A., Stefan Kharicha, M., Ludwig, A. & Wu, M., 2013, In: Metallurgical and materials transactions. A, Physical metallurgy and materials science . 44, p. 650-660

    Research output: Contribution to journal › Article › Research › peer-review

  3. Published

    “Simultaneous observation of melt flow and motion of equiaxed crystals during solidification using a dual phase Particle Image Velocimetry technique. Part II

    Kharicha, A., Stefan Kharicha, M., Ludwig, A. & Wu, M., 2013, In: Metallurgical and materials transactions. A, Physical metallurgy and materials science . 44, p. 661-668

    Research output: Contribution to journal › Article › Research › peer-review

  4. Published

    Simultaneous observation of melt flow and motion of equiaxed crystals during solidification using a dual phase PIV technique

    Kharicha, A., Stefan Kharicha, M., Ludwig, A. & Wu, M., 2013, McWASP XIII. p. 1-1

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  5. Published

    Two-year-term report for the scientific evaluation of the Christian-Doppler laboratory for " Advanced Process Simulation of Solidification and Melting"

    Wu, M., 2013

    Research output: Book/Report › Commissioned report › Transfer

  6. Published

    "Using a Three Phase Mixed Columnar-Equiaxed Solidification Model to Study Macrosegregation in Ingot Casting: Perspectives and Limitations"

    Wu, M., Kharicha, A. & Ludwig, A., 2013, "Using a Three Phase Mixed Columnar-Equiaxed Solidification Model to Study Macrosegregation in Ingot Casting: Perspectives and Limitations". p. 171-180

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  7. Published

    "Variation of the Resistance During the Elektrode Movement in the Electroslag Remelting Process"

    Kharicha, A., Wu, M. & Ludwig, A., 2013, "Variation of the Resistance During the Elektrode Movement in the Electroslag Remelting Process". p. 145-150

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  8. 2012
  9. Published

    Modeling of Multiscale and Multiphase Phenomena in Material Processing

    Ludwig, A., Kharicha, A. & Wu, M., 15 May 2012, CFD Modeling and Simulation in Materials Processing - Held During the TMS 2012 Annual Meeting and Exhibition. p. 147 - 161

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  10. Published

    Advanced Multiphase Modeling of Solidification with OpenFOAM®

    Vakhrushev, A., Ludwig, A., Wu, M., Tang, Y., Hackl, G. & Nitzl, G., 2012, Open Source CFD International Conference 2012. p. 1-18

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  11. Published

    Adv. Solidification Studies on Transparent Alloy Systems: A New European Solidification Insert for Material Science Glovebox on Board the Int. Space Station

    Ludwig, A. & Mogeritsch, J., 2012, In: JOM. p. 1097-1101

    Research output: Contribution to journal › Article › Research › peer-review

  12. Published

    Annual report: Characterisation and Optimisation of the Electrolyte Flow in Conventional Tankhouse Cells

    Kemminger, A., 2012

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  13. Published

    Charakterisierung der Kühlleistung unterschiedlicher Düsen beim Stranggießen von Stahl

    Kemminger, A., 2012.

    Research output: Contribution to conference › Poster › Research › peer-review

  14. Published

    Experimental investigation on the ternary phase diagram Cu-Sn-P

    Ludwig, A., Grasser, M. & Schillinger, W., 2012, In: World of metallurgy - Erzmetall : internationale Fachzeitschrift für Metallurgie. 65, p. 117-125

    Research output: Contribution to journal › Article › Research › peer-review

  15. Published

    Half year report: Characterisation and Optimisation of the Electrolyte Flow in Conventional Tankhouse Cells

    Kemminger, A., 2012

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  16. Published

    Influence of the earth magnetic field on electrically induced flows

    Kharicha, A., Wu, M., Ludwig, A. & Karimi Sibaki, E., 2012, In: Journal of iron and steel research international. 19, p. 63-66

    Research output: Contribution to journal › Article › Research › peer-review

  17. Published

    Influence of the frequency of the applied AC current on the electroslag remelting process

    Kharicha, A., Wu, M., Ludwig, A., Ramprecht, M. & Holzgruber, H., 2012, CFD Modeling and Simulation in Materials Processing: Proceedings of a symposium sponsored by Association for Iron and Steel Technology and the Process Technology and Modeling Committee of the Extraction and Processing Division and the Solidification Committee of the Materials Processing and Manufacturing Division of TMS (The Minerals, Metals & Materials Society) Held during the TMS 2012 Annual Meeting & Exhibition Orlando, Florida, USA March 11-15, 2012. p. 139-146

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  18. Published

    Investigation on Peritectic Solidification using a Transparent Organic System

    Mogeritsch, J., 2012, 162 p.

    Research output: Thesis › Doctoral Thesis

  19. Published

    Investigations on the origin of radial distribution of non-metallic inclusions in ESR ingot

    Kharicha, A., Körp, J., Kubin, M., Wu, M. & Ludwig, A., 2012, CLEANSTEEL8. p. 145-157

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  20. Published

    Jahresbericht CD-Labor für Prozesssimulation von Erstarrungs-und Umschmelzvorgängen Modul I

    Vakhrushev, A., Wu, M. & Ludwig, A., 2012

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  21. Published

    Jahresbericht CD-Labor für Prozesssimulation von Erstarrungs-und Umschmelzvorgängen Modul II

    Karimi Sibaki, E., Wu, M. & Ludwig, A., 2012

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  22. Published

    Jahresbericht MCL Projekt A1.1.

    Domitner, J., Hölzl, C., Ludwig, A. & Wu, M., 2012

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  23. Published

    Jahresbericht MCL Projekt A1.2.

    Bohacek, J., Ludwig, A. & Wu, M., 2012

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  24. Published

    Jahresbericht MCL Projekt A1.4

    Unterreiter, G. & Ludwig, A., 2012

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  25. Published

    Jahresbericht Quench-IT

    Unterreiter, G. & Ludwig, A., 2012

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  26. Published

    Microstructure formation in the two phase region of the binary peritectic organic system TRIS-NPG

    Mogeritsch, J. & Ludwig, A., 2012, Materials Research in Microgravity 2012. p. 48-55

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  27. Published

    Modeling of multiphase and multiscale phenomena in materials processing

    Ludwig, A., Kharicha, A. & Wu, M., 2012, CFD Modeling and Simulation in Materials Processin. p. 149-161

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  28. Published

    Multiphase modelling of the macrosegregation in ingot castings

    Wu, M., Li, J., Kharicha, A. & Ludwig, A., 2012, ICRF-2012. p. 1-10

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  29. Published

    Numerical study of the influence of mold filling conditions on the as-cast structure of Al-4 wt.% Cu ingots

    Ahmadein, M., Kharicha, A. & Ludwig, A., 2012, International Conf. on Engineering and Technology. p. 1-6

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  30. Published

    Simulation druckdichter Aluminium-Gussteile

    Vaas, S., 2012

    Research output: Thesis › Master's Thesis

  31. Published

    Simulation of channel segregation using a two-phase columnar solidification model, Part II: Mechanism and parameter study

    Li, J., Wu, M., Hao, J., Kharicha, A. & Ludwig, A., 2012, In: Computational materials science. 55, p. 419-429

    Research output: Contribution to journal › Article › Research › peer-review

  32. Published

    Simulation of channel segregation using a two-phase columnar solidification model, Part I: Model description and verification

    Li, J., Wu, M., Hao, J. & Ludwig, A., 2012, In: Computational materials science. 55, p. 407-418

    Research output: Contribution to journal › Article › Research › peer-review

  33. Published

    Simulation of the as-cast structure of Al-4.0wt.%Cu ingots with a 5-phase mixed columnar-equiaxed solidification model

    Wu, M., Ahmadein, M., Kharicha, A. & Ludwig, A., 2012, McWASP XIII. p. 1-8

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  34. Published

    “Simultaneous observation of melt flow and motion of equiaxed crystals during solidification

    Kharicha, A., 2012, Metall. Mater. Trans. A.

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  35. Published

    Thermodynamic description of the system Cu-Sn-P: experimental and numerical invigation

    Grasser, M., Ludwig, A. & Schillinger, W., 2012, In: International journal of materials research : IJMR ; Zeitschrift für Metallkunde. 103, p. E1-7

    Research output: Contribution to journal › Article › Research › peer-review

  36. Published

    Thermo-mechanical modeling of dendrite deformation in continuous casting of steel

    Domitner, J., Drezet, J.-M., Wu, M. & Ludwig, A., 2012.

    Research output: Contribution to conference › Poster › Research › peer-review

  37. Published

    Thermo-mechanical modeling of dendrite deformation in continuous casting of steel

    Domitner, J., Drezet, J.-M., Wu, M. & Ludwig, A., 2012, IOP Conf. Series: Materials Science and Engineering. p. 012058-1-012058-8

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  38. Published

    Using a two-phase columnar solidification model to study the principle of mechanical softreduction in slab casting

    Wu, M., Domitner, J. & Ludwig, A., 2012, In: Metallurgical and materials transactions. A, Physical metallurgy and materials science . 43, p. 945-964

    Research output: Contribution to journal › Article › Research › peer-review

  39. Published

    Vibration induced flow in a horizontal centrifugal casting

    Kharicha, A., Bohàcek, J., Ludwig, A. & Wu, M., 2012, Symposium on "CFD and Simulation in Materials Processing". p. 227-234

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  40. Published

    Vibration induced flow in a horizontal centrifugal casting

    Kharicha, A., Bohacek, J., Ludwig, A. & Wu, M., 2012, CFD Modeling and Simulation in Materials Processing. p. 227-234

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  41. 2011
  42. Published

    Numerical study and experimental investigation of solidification phenomena in semi-continuous casting of Bronze

    Hao, J., Grasser, M., Wu, M. & Ludwig, A., 11 Jan 2011, Materials Processing Technologies. p. 1401-1404 4 p. (Advanced Materials Research; vol. 154-155).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  43. Published

    3D simulation of interdendritic flow through a Al-18wt.%Cu structure captured with X-ray microtomography

    Domitner, J., Hölzl, C., Kharicha, A., Wu, M., Ludwig, A., Köhler, M. & Ratke, L., 2011, IOP Conf. Series: Materials Science and Engineering. p. 012016-1-012016-6

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  44. Published

    3D simulation of interdendritic flow through a Al-18wt.%Cu structure captured with X-ray microtomography

    Domitner, J., Hölzl, C., Kharicha, A., Wu, M., Ludwig, A., Köhler, M. & Ratke, L., 2011.

    Research output: Contribution to conference › Poster › Research › peer-review

  45. Published

    3d simulation of the electro-slag remelting process

    Kharicha, A., Ludwig, A. & Wu, M., 2011, Proceeding of the TMS Annual Meeting. p. 1-6

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  46. Published

    3D simulation of the melting during an electro-slag remelting process

    Kharicha, A., Ludwig, A. & Wu, M., 2011, Int. Symp. on Liquid Metal Processing and Casting (LMPC-11). p. 41-48

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  47. Published

    A 3-phase model for mixed columnar-equiaxed solidification in DC casting of bronze

    Hao, J., Grasser, M., Wu, M., Ludwig, A., Riedle, J. & Eberle, R., 2011, IOP Conf. Series: Mater. Sci. Eng., vol. 27. p. 1-6

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  48. Published

    A numerical study on the principle of mechanical softreduction for reducing the centreline segregation in slab casting

    Wu, M., Domitner, J., Ludwig, A. & Mayer, F., 2011, Proceedings of the 4rd Int. Conf. Simulation and Modeling in Metallurgical Processes in Steelmaking (STEELSIM 2011). p. 4.1-11

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  49. Published

    Coupling the turbulent flow with the solidification processes in OpenFOAM®

    Wu, M., Ludwig, A., Vakhrushev, A., Tang, Y., Nitzl, G. & Hackl, G., 2011, Proceedings of Open Source CFD Int. Conf. 2011. p. 1-21

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  50. Published

    Droplet formation in small electroslag remelting processes

    Kharicha, A., Ludwig, A. & Wu, M., 2011, Int. Symp. on Liquid Metal Processing and Casting (LMPC-11). p. 113-119

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  51. Published

    In-situ observation of coupled growth morphologies in organic peritectics

    Mogeritsch, J. & Ludwig, A., 2011, IOP Conf. Series: Mater. Sci. Eng.. Vol. 27. p. 012028-012032

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  52. Published

    In-situ observation of coupled growth morphologies in organic peritectics

    Mogeritsch, J. P. & Ludwig, A., 2011, In: IOP Conference Series: Materials Science and Engineering. 27, 1, 012028.

    Research output: Contribution to journal › Conference article › peer-review

  53. Published

    In-situ Observation of Coupled Growth Morphologies in Organic Peritectics

    Mogeritsch, J., 2011.

    Research output: Contribution to conference › Poster › Research › peer-review

Previous 1...4 5 6 7 8 9 10 11 ...13 Next
View graph of relations

Contact information

Franz-Josef-Strasse 18/III, 8700 Leoben
  • Main phone number: +43 3842 402 3101