Chair of Simulation and Modelling of Metallurgical Processes (310)

Organisational unit: Chair

Research output

  1. 2013
  2. Published

    "Optimization and Modelling of the Electrolyte Flow in a Conventional Copper Electrorefining Cell"

    Kemminger, A. & Ludwig, A., 2013

    Research output: Book/ReportCommissioned reportTransferpeer-review

  3. Published

    Optische Beobachtung von peritektischen Erstarrungsmorphologien am Limit der konstitutionellen Unterkühlung durch den Einsatz von organischen Modellsubstanzen

    Mogeritsch, J., 2013, Optische Beobachtung von peritektischen Erstarrungsmorphologien am Limit der konstitutionellen Unterkühlung durch den Einsatz von organischen Modellsubstanzen.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  4. Published

    "Parameter study of large scale ESR process"

    Karimi Sibaki, E., Kharicha, A. & Wu, M., 2013

    Research output: Book/ReportCommissioned reportTransferpeer-review

  5. Published

    Prediction of macrosegregation in steel ingot

    Li, J., 2013, 235 p.

    Research output: ThesisDoctoral Thesis

  6. Published

    Preparation of Insitu-Observations of Isothermal Coupled Peritectic Growth on Board of the ISS

    Ludwig, A. & Mogeritsch, J., 2013, Symposium on "Materials Research in Microgravity. p. 1-1

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  7. Published

    Shallow Water Model for Horizontal Centrifugal Casting

    Bohacek, J., Kharicha, A., Ludwig, A. & Wu, M., 2013, McWASP XIII. p. 1-1

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  8. Published

    Simulation of macrosegregation in a 2.45-ton steel ingot using a three-phase mixed columnar-equiaxed model

    Li, J., Wu, M., Ludwig, A. & Kharicha, A., 2013, In: International journal of heat and mass transfer. 72.2014, May, p. 668-679 12 p.

    Research output: Contribution to journalArticleResearchpeer-review

  9. Published

    "Simulation of the beam blank casting. A new SEN type for the thin slab casting"

    Vakhrushev, A., 2013

    Research output: Book/ReportCommissioned reportTransferpeer-review

  10. Published
  11. Published