Chair of Processing of Composites and Design for Recycling (270)

Organisational unit: Chair

251 - 300 out of 372Page size: 50

Research output

  1. 2015
  2. Published

    Efficient Manufacturing of Aeronautic CFRP-Structures through Automated Profile Preforming

    Fauster, E., 24 Apr 2015.

    Research output: Contribution to conference › Presentation › Research › peer-review

  3. Published

    Efficient Manufacturing of Aeronautic CFRP-Structures through Automated Profile Preforming

    Fauster, E., Schillfahrt, C. & Schledjewski, R., 23 Apr 2015.

    Research output: Contribution to conference › Abstract › peer-review

  4. Published

    Numerical Filling Predictions and Mechanical Mould Simulations for Composite Manufacturing Techniques

    Grössing, H., Konstantopoulos, S. & Schledjewski, R., 17 Apr 2015, ESAFORM 2015, Graz, Österreich, 15.-17.04.2015.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  5. Published

    Forming of fiber reinforced polymers

    Schledjewski, R., 16 Apr 2015.

    Research output: Contribution to conference › Presentation › Research

  6. Published

    Einfluss des Längeneffekt auf die mechanischen Eigenschaften von trockenen E-Glasfasern

    Maier, A., 6 Mar 2015, 4a Technologietag "Leichtbau und Composites" 2015 Proceedings .

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  7. Published

    splineTEX - Industrielle Fertigung von gekrümmten Faserverbundrohren durch Einsatz von Flüssigimprägnierverfahren

    Schillfahrt, C., 6 Mar 2015.

    Research output: Contribution to conference › Presentation › Research › peer-review

  8. Published

    splineTEX - Industrielle Fertigung von gekrümmten Faserverbundrohren durch Einsatz von Flüssigimprägnierverfahren

    Schillfahrt, C., Fauster, E., Schledjewski, R., Troi, V. & Schennach, O., 6 Mar 2015.

    Research output: Contribution to conference › Paper › peer-review

  9. Published

    Material performance under in situ consolidation conditions during continuous placement processing

    Schledjewski, R., Satheesh, B. & Tonejc, M., 4 Feb 2015.

    Research output: Contribution to conference › Presentation › Research

  10. Published

    Influence of Textile Parameters on the Preform In-Plane Permeability Characteristics of Non-Crimp Fabric Preforms

    Grössing, H., Fauster, E., Schledjewski, R. & Weninger, M., 1 Feb 2015, In: Polymer Composites. p. 1-10 DOI 10.1002/pc.23360.

    Research output: Contribution to journal › Article › Research › peer-review

  11. E-pub ahead of print

    Influence of textile parameters on the in-plane permeability characteristics of non-crimped fabric preforms

    Grössing, H., Fauster, E., Weninger, M. & Schledjewski, R., 23 Jan 2015, (E-pub ahead of print) In: Polymer Composites. 37.2016, 6, p. 1854-1863 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  12. Published

    Automated Profile Preforming for Aerospace Applications

    Schillfahrt, C., Fauster, E. & Schledjewski, R., Jan 2015, In: JEC Composites Magazine. 94, p. 43-45 3 p.

    Research output: Contribution to journal › Article › Research › peer-review

  13. Published

    Accurate, reproducible and robust in-plane permeability characterization with a lowbudget test rig: A challenge or straightforward?

    Grössing, H., Fauster, E. & Schledjewski, R., 2015, p. 267-283. 17 p.

    Research output: Contribution to conference › Paper › peer-review

  14. Published

    A Comparison of two Measurement Techniques for Determining the 2D Permeability Characteristics of Reinforcing Textiles

    Fauster, E., Grössing, H. & Schledjewski, R., 2015, Proceedings of the 20th International Conference of Composite Materials.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  15. Published

    An Evaluation of the Reproducibility of Capacitive Sensor Based In-Plane Permeability Measurements: A Benchmarking Study

    Grössing, H., Schledjewski, R., Kaufmann, S., Mitschang, P. & Becker, D., 2015, In: Express Polymer Letters. 9, p. 129-142

    Research output: Contribution to journal › Article › Research › peer-review

  16. Published

    A Study on Geometrical Parameters Influencing the Mechanical Spreading of Fibre Bundles

    Tonejc, M., Steiner, H., Fauster, E., Konstantopoulos, S. & Schledjewski, R., 2015, Proceedings of the 20th International Conference of Composite Materials.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  17. Published

    Contributing to the Optimization of the Preform LCM Process Chain: Permeability of Reinforcing Textiles

    Grössing, H., 2015

    Research output: Thesis › Doctoral Thesis

  18. Published

    Enabling RTM processing of components with varying wall thickness: Accurate transverse Permeability measurements under unsaturated flow conditions

    Konstantopoulos, S., Hergan, P., Grössing, H. & Schledjewski, R., 2015.

    Research output: Contribution to conference › Paper › peer-review

  19. Published

    Exploiting temperature measurements for cure monitoring of FRP composites. Applications with thermocouples and Infrared thermography

    Konstantopoulos, S., Tonejc, M., Maier, A. & Schledjewski, R., 2015, In: Journal of Reinforced Plastics and Composites. 34, 12, p. 1015 1026 p.

    Research output: Contribution to journal › Article › Research › peer-review

  20. Published

    Influence of Test Rig Configuation and Evaluation Algorithms on Optical Radial-Flow Permeability Measurement: A Benchmark Exercise

    Berg, D. C., Fauster, E., Abliz, D., Grössing, H., Meiners, D., Schledjewski, R. & Ziegmann, G., 2015, Proceedings of the 20th International Conference of Composite Materials.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  21. Published

    Influence of test rig configuration and evaluation algorithms on optical radial-flow permeability measurement: A benchmark exercise

    Berg, D. C., Fauster, E., Abliz, D., Grössing, H., Meiners, D., Schledjewski, R. & Ziegmann, G., 2015.

    Research output: Contribution to conference › Paper › peer-review

  22. Published

    Kompaktierungsverhalten kontinuierlicher Faserbündel

    Steiner, H., 2015

    Research output: Thesis › Master's Thesis

  23. Published

    Konsolidierung thermoplastischer Verbundwerkstoffe – Phänomene, Modellvorstellungen und Vorhersagefähigkeit

    Moser, M., 2015

    Research output: Thesis › Master's Thesis

  24. Published

    Konstruktive Auslegung und Umsetzung eines 3D Permeameters

    Hergan, P., 2015

    Research output: Thesis › Master's Thesis

  25. Published

    Numerical Filling Predictions and Mechanical Mold Simulations for Composite Manufacturing Techniques: RTM Tool Development

    Grössing, H., Konstantopoulos, S. & Schledjewski, R., 2015, Key engineering materials. Vol. 651-653. p. 423-432 (Key engineering materials).

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  26. 2014
  27. Published

    Effiziente Verarbeitung von Luftfahrt-Strukturbauteilen durch Einsatz automatisierter Profil-Preformfertigung

    Schillfahrt, C., 13 Nov 2014.

    Research output: Contribution to conference › Presentation › Research › peer-review

  28. Published

    Smart Composite Tubes – Series Production of 3D Curved Hollow CFRP-Tubes

    Schillfahrt, C., 10 Mar 2014.

    Research output: Contribution to conference › Presentation › Research › peer-review

  29. Published

    23. Leobener Kunststoff-Kolloquium - Hocheffiziente Verbundwerkstoffe

    Schledjewski, R. (Editor), 2014, 23. Leobener Kunststoff-Kolloquium - Hocheffiziente Verbundwerkstoffe. Eigenverlag, (Schriftenreihe Kunststofftechnik Leoben; vol. 4).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  30. Published

    2D Permeabilitätsbestimmung von flächigen technischen Textilien

    Grössing, H., 2014.

    Research output: Contribution to conference › Poster › Research › peer-review

  31. Published

    Additive Manufacturing mittels Legetechnik

    Tonejc, M., 2014.

    Research output: Contribution to conference › Poster › Research › peer-review

  32. Published

    Automated Preforming of Profiles for Efficient LCM-Processing of Structural Components in Aeronautic Applications

    Fauster, E., Schillfahrt, C. & Schledjewski, R., 2014, Proceedings of Reinforced Plastics 2014 International BALATON Conference. p. 1-1

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  33. Published

    Automatisierte Legeverfahren

    Schledjewski, R., 2014, Handbuch Faserverbundkunststoffe/Composites – Grundlagen, Verarbeitung, Anwendungen. p. 233-236

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  34. Published

    Bearbeitung, Oberflächenbehandlung

    Schledjewski, R., Blinzler, M. & Hildebrandt, K., 2014, Handbuch Verbundwerkstoffe: Werkstoffe, Verarbeitung, Anwendung. p. 433-453

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  35. Published

    Christian Doppler Laboratory for High Efficient Composite Processing

    Schledjewski, R., Grössing, H., Konstantopoulos, S., Hueber, C. & Tonejc, M., 2014, In: Berg- und hüttenmännische Monatshefte : BHM. p. 1-9

    Research output: Contribution to journal › Article › Research › peer-review

  36. Published

    Comparison of Algorithms for 2D Anisotropic Permeability Calculation in Terms of Uncertainty Propagation

    Fauster, E., Grössing, H. & Schledjewski, R., 2014, Proceedings of the 16th European Conference on Composite Materials. p. 1-8

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  37. Published

    CONTINUOUS ON-LINE ANALYSIS OF THE MATRIX FLOW THROUGH MANIPULATED RTM PREFORMS COMPARED TO NUMERICAL FILLING SIMULATIONS

    Grössing, H., Schledjewski, R. & Kaufmann, S., 2014, SAMPE Tech US 2014. p. 1-14

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  38. Published

    Defect depth determination in a CFRP structure using TSR technique

    Oswald-Tranta, B., Maier, A. & Schledjewski, R., 2014

    Research output: Non-textual form › Web publication/site › Research

  39. Published

    Effiziente Verarbeitung von Luftfahrt-Strukturbauteilen durch Einsatz automatisierter Profil-Preformfertigung

    Schillfahrt, C., Fauster, E. & Schledjewski, R., 2014, 23. Leobener Kunststoff-Kolloquium: Hocheffiziente Verbundwerkstoffe. Schledjewski, R. (ed.). Eigenverlag, p. 29-39 10 p. (Schriftenreihe Kunststofftechnik Leoben; vol. 4).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  40. Published

    Einfluss textiler Parameter auf das Drapierverhalten von flächigen technischen Textilien

    Weisser, T., 2014, 115 p.

    Research output: Thesis › Master's Thesis

  41. Published

    Experimentelle Untersuchung der maximalen Verarbeitungsgeschwindigkeit einer geschlossenen Imprägniereinheit anhand der Abhängigkeit zwischen Imprägniergeschwindigkeit und Imprägnierdruck

    Maier, A., 2014, Tagungsband zum 23. Leobener Kunststoff-Kolloquium. p. XXX-XXX

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  42. Published

    Experimentelle Untersuchung der maximalen Verarbeitungsgeschwindigkeit einer selbst- designten geschlossenen Imprägniereinheit

    Maier, A., 2014.

    Research output: Contribution to conference › Poster › Research › peer-review

  43. Published

    FRP parts in aircraft development: design-to-cost approaches

    Horejsi, K. & Schledjewski, R., 2014, Proceedings of THE 22ND ANNUAL INTERNATIONAL CONFERENCE ON COMPOSITE ENGINEERING. p. 1-2

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  44. Published

    Ganzheitliche Prozessentwicklung im Bereich der Legetechnik

    Tonejc, M., Pazour, P., Fauster, E. & Schledjewski, R., 2014, Schriftenreihe Kunststofftechnik Leoben. p. 17-27

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  45. Published

    Ganzheitliche Prozessentwicklung im Bereich der Legetechnik

    Tonejc, M., 2014.

    Research output: Contribution to conference › Presentation › Research

  46. Published

    Glass Covered Magnetic Micro-Wires Operating in the Domain Wall Nucleation and Propagation Sensing Mode for Stress Detection in FRP Composite Structures

    Konstantopoulos, S., Potirakis, S., Christopoulos, A., Schledjewski, R. & Hristoforou, E., 2014, In: Sensor Letters. 12

    Research output: Contribution to journal › Article › Research › peer-review

  47. Published

    Impregnation Mechanisms of Fiber Reinforced Polymer Composites

    Kastanis, D., 2014.

    Research output: Contribution to conference › Poster › Research › peer-review

  48. Published

    Kontinuierliches Schweißen unidirektional faserverstärkter Tapes – Wie kann die Bindungsqualität bewertet werden?

    Schledjewski, R., 2014, Online Proceedings 4a Technologietag 2014. p. 1-7

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  49. Published

    Kosteneffiziente Verbundbauteilgestaltung in der Luftfahrt – Methoden und Modelle zur Kostenschätzung

    Hueber, C., Horejsi, K. & Schledjewski, R., 2014, 23. Leobener Kunststoff-Kolloquium : 13. - 14. November 2014. Schledjewski, R. (ed.). p. 155-167 (Schriftenreihe Kunststofftechnik Leoben; vol. 4).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  50. Published

    Kritische Betrachtung von LCM Füllsimulationen: Abgleich des realen Prozesses mit numerischen Vorhersagen

    Grössing, H., Schledjewski, R., Stadlmajer, N. & Fleischmann, M., 2014, 23. Leobener Kunststoff-Kolloquium: Hocheffiziente Verbundwerkstoffe. p. 7-16

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  51. Published

    Materialhybride lokale Bauteilverstärkung – Chancen und Herausforderungen

    Schledjewski, R., 2014, 23. Leobener Kunststoff-Kolloquium - Hocheffiziente Verbundwerkstoffe. p. 193-200

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  52. Published

    Materialhybride lokale Bauteilverstärkung – Chancen und Herausforderungen

    Schledjewski, R., 2014.

    Research output: Contribution to conference › Poster › Research › peer-review

Previous 12 3 4 5 6 7 8 Next
View graph of relations

Contact information

Otto Glöckel-Straße 2/III, 8700 Leoben
  • Main phone number: +43 3842 402 2701