Chair of Processing of Composites and Design for Recycling (270)

Organisational unit: Chair

151 - 200 out of 372Page size: 50

Research output

  1. 2018
  2. Published

    Experimental characterization of single ply out-of-plane permeability through gaseous flow

    Fauster, E., Vierkötter, C., Appel, L., Lugo, J., Schijve, W. & Heider, D., Sept 2018, In: Polymer Composites. 39.2018, 9, p. 3247-3258 12 p.

    Research output: Contribution to journal › Article › Research › peer-review

  3. Published

    Application of vibrating vents to control void content of RTM parts

    Hergan, P., Fauster, E. & Schledjewski, R., Jul 2018, Proceedings of SAMPE Europe Conference 2018. 7 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  4. Published

    Winding Trajectories for Dry Filament Wound Preforms

    Sofi, T. R. & Schledjewski, R., 28 Jun 2018.

    Research output: Contribution to conference › Paper

  5. Published

    Natural fibre textile characterization for dual-scale flow prediction

    Blößl, Y. & Schledjewski, R., 25 Jun 2018.

    Research output: Contribution to conference › Poster › Research › peer-review

  6. Published

    Inline control of tape width during automated tape placement

    Schledjewski, R., 24 Jun 2018, Proceedings of the 18th European Conference on Composite Materials.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  7. Published

    NATURAL FIBRE TEXTILE CHARACTERIZATION FOR DUAL-SCALE FLOW PREDICTION

    Blößl, Y. & Schledjewski, R., 24 Jun 2018, Proceedings of the 18th European Conference on Composite Materials.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  8. Published

    Image processing and data evaluation algorithms for reproducible optical in-plane permeability characterization by radial flow experiments

    Fauster, E., Berg, D. C., Abliz, D., Grössing, H., Meiners, D., Ziegmann, G. & Schledjewski, R., 17 Jun 2018, In: Journal of composite materials. 53.2019, 1, p. 45-63 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  9. Published

    Using (VA)RTM with a Rigid Mould to Produce Fibre Metal Laminates with Proven Impact Strength

    Hergan, P., Li, Y., Zaloznik, L., Kaynak, B., Arbeiter, F., Fauster, E. & Schledjewski, R., 11 Jun 2018, In: Journal of Manufacturing and Materials Processing. 2.2018, 2, 12 p., 38.

    Research output: Contribution to journal › Article › Research › peer-review

  10. Published

    Analysis of the spontaneous, capillary driven wetting behaviour in reinforcing textile structure

    Blößl, Y. & Schledjewski, R., 30 May 2018, PROCEEDINGS OF THE 14TH INTERNATIONAL CONFERENCE ON FLOW PROCESSING IN COMPOSITE MATERIALS.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  11. Published

    Forming of complex-shaped composite tubes using optimized bladder-assisted resin transfer molding

    Schillfahrt, C., Fauster, E. & Schledjewski, R., 2 May 2018, Proceedings of the 21st International ESAFORM Conference on Material Forming, ESAFORM 2018. Vol. 1960. 020027

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  12. E-pub ahead of print

    Robust evaluation of flow front data for in-plane permeability characterization by radial flow experiments

    Fauster, E., Berg, D. C., May, D., Blößl, Y. & Schledjewski, R., 5 Mar 2018, (E-pub ahead of print) In: Advanced Manufacturing: Polymer and Composites Science. 4.2018, 1, p. 24-40 17 p.

    Research output: Contribution to journal › Article › Research › peer-review

  13. Published

    Influence of processing parameters on quality factors of one-shot hybrid structures made by RTM

    Hergan, P., Beter, J., Stelzer, S., Fauster, E. & Schledjewski, R., 21 Feb 2018, In: Production Engineering : research and development. 12.2018, 2, p. 185-194 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  14. Published

    Automated thermoplastic tape placement – Is there a missing link to reach industrialization?

    Schledjewski, R., 2018, Proceedings of SAMPE Europe Conference 2018.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  15. Published

    Determination of the friction coefficient in dry-fiber filament winding

    Neunkirchen, S. & Schledjewski, R., 2018, Proceedings of the 18th European Conference on Composite Materials.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  16. Published

    Determination of the unsaturated through-thickness permeability of fibrous preforms based on flow front detection by ultrasound

    Konstantopoulos, S., Grössing, H., Hergan, P. & Schledjewski, R., 2018, In: Polymer Composites. 39.2018, 2, p. 360-367 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  17. Published

    Dünne CFK-Schaum-Sandwichstrukturen - Bewertung unterschiedlicher Fertigungsmöglichkeiten

    Weninger, M., 2018

    Research output: Thesis › Master's Thesis

  18. Published

    Experimental Process Pressure Analysis for Model-Based Manufacturing of Composites by Resin Transfer Moulding

    Fauster, E., Thirunavukkarasu, J., Hergan, P. & Schledjewski, R., 2018, IOP Conference Series: Materials Science and Engineering.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  19. Published

    Permeability of textile fabrics for fibre-reinforced polymer composites: Experimental methods, data analytics and application

    Fauster, E., 2018

    Research output: Thesis › Habilitation thesis › peer-review

  20. Accepted/In press

    POLYNOMIAL SURFACE MODELLING OF FLOW FRONT DATA FOR IN-PLANE PERMEABILITY CHARACTERIZATION OF TEXTILE FABRICS BY RADIAL FLOW EXPERIMENTS

    Fauster, E., Berg, D. C., May, D., Blößl, Y. & Schledjewski, R., 2018, (Accepted/In press).

    Research output: Contribution to conference › Paper › peer-review

  21. Published

    Quality controlled manufacturing of Hybrid-Metal CRFP Composites by Resin Transfer Moulding

    Fauster, E., Hergan, P. & Schledjewski, R., 2018, Proceedings ICMAC 2018.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  22. Published

    Sensorintegration in Sandwichverbundstrukturen für Luftfahrtinnenkomponenten

    Lang, A., 2018

    Research output: Thesis › Master's Thesis

  23. 2017
  24. Published

    Glass fiber/epoxy composites with integrated layer of carbon nanotubes for deformation detection

    Slobodian, P., Lloret Pertegás, S., Riha, P., Matyas, J., Olejnik, R., Schledjewski, R. & Kovar, M., 29 Dec 2017, In: Composites science and technology. 156.2018, 1 March, p. 61-69 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  25. Published

    Monitoring of FRPC manufacturing processes

    Schledjewski, R., 15 Nov 2017, p. 359-367. 9 p.

    Research output: Contribution to conference › Paper

  26. Published

    Influence of Cure Monitoring on the Curing Cycle Time and the Associated Economic Impact

    Hueber, C., Konstantopoulos, S., Hergan, P., Höfler, J., Horejsi, K. & Schledjewski, R., 4 Nov 2017, In: Journal of Mineral, Metal and Material Engineering. 2017, 3, p. 58-65 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  27. Published

    Permeability Customisation through Preform Manipulation Utilising 3D-Printing Technology

    Tonejc, M., Pletz, M., Fauster, E. & Schledjewski, R., 1 Nov 2017, In: Polymers and Polymer Composites. 25.2017, 9, p. 651-660 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  28. Published

    Permeability Customisation Through Preform Manipulation Utilizing 3D-Printing Technology

    Tonejc, M., Pletz, M., Fauster, E. & Schledjewski, R., 1 Nov 2017, In: Polymers & Polymer Composites (Polymers and polymer composites). 25.2017, 9, p. 643-652 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  29. E-pub ahead of print

    Influence of process pressures on filling behavior of tubular fabrics in bladder-assisted resin transfer molding

    Schillfahrt, C., Fauster, E. & Schledjewski, R., 30 Oct 2017, (E-pub ahead of print) In: Advanced Manufacturing: Polymer and Composites Science. 3.2017, 4, p. 148-158 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  30. Published

    Produktionsplanung um Übergang zwischen diskreter und Batch-Fertigung in der Composite Luftfahrt Industrie

    Hueber, C., Fischer, G. & Schledjewski, R., Sept 2017, Logistisches Produktionsmanagement: 4. Wissenschaftlicher Industrielogistik-Dialog in Leoben (WiLD). Zsifkovits, H. E. & Altendorfer-Kaiser, S. (eds.). p. 63-70

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  31. Published

    INFLUENCE OF PROCESSING TEMPERATURES ON THE DEFLECTION OF HYBRID-METAL-CARBON COMPOSITES MADE BY RESIN TRANSFER MOULDING

    Hergan, P., Beter, J., Stelzer, S., Fauster, E. & Schledjewski, R., 25 Aug 2017, Proceedings of the 21st International Conference on Composite Materials.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  32. Published

    Cascade Injection Procedure for Bladder-assisted Resin Transfer Molding

    Schillfahrt, C., Fauster, E. & Schledjewski, R., 21 Aug 2017. 11 p.

    Research output: Contribution to conference › Paper › peer-review

  33. Published

    HybridRTM - Quality Controlled Manufacturing of Hybrid Material Composites through Resin Transfer Moulding

    Fauster, E., Hergan, P., Stelzer, S., Scheiblhofer, S., Cespedes-Gonzales, G., Pfeifer, S., Rittenschober, B., Sieberer, M., Lauermann, M. & Schledjewski, R., 7 Jul 2017.

    Research output: Contribution to conference › Paper › peer-review

  34. Published

    High performance green composites for green technologies

    Schledjewski, R., Lloret Pertegas, S., Blößl, Y., Anusic, A., Resch-Fauster, K., Mahendran, A. R. & Wuzella, G., 6 Jul 2017, Key Engineering Materials. Trans Tech Publications, Vol. 742. p. 271-277 7 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  35. Published

    HybridRTM - Quality Controlled Manufacturing of Hybrid Material Composites through Resin Transfer Moulding

    Fauster, E., 6 Jul 2017.

    Research output: Contribution to conference › Presentation › Research

  36. Published

    Analytical modeling of textile parameters and draping behavior of 2D biaxial braided sleevings

    Schillfahrt, C. & Schledjewski, R., 31 May 2017, In: Polymers & Polymer Composites (Polymers and polymer composites). 25.2017, 5, p. 315-326 12 p.

    Research output: Contribution to journal › Article › Research › peer-review

  37. Published

    Development of fully bio-based composite materials for structural applications Processing case study based on small sized wind energy turbine blades

    Schledjewski, R. & Blößl, Y., May 2017, Polymer Composites 2017. Foller, B. (ed.). p. 051-053

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  38. Published

    Continuous welding of unidirectional fiber reinforced thermoplastic tape material

    Schledjewski, R., 27 Apr 2017, AIP Conference Proceedings. American Institute of Physics, p. 1-5 5 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  39. Published

    Modell-Basierte FKV-Verarbeitungstechnik an Beispielen der Flüssigimprägnierverfahren

    Fauster, E., Hergan, P., Thirunavukkarasu, J., Vilaca Lourenco, G. & Schledjewski, R., 21 Apr 2017.

    Research output: Contribution to conference › Poster › Research

  40. Published

    Bio-basierte Verbundwerkstoffe

    Schledjewski, R., Resch-Fauster, K., Anusic, A. & Blößl, Y., Apr 2017, Tagungsband zum 26. Leobener Kunststoff-Kolloquium: Innovative Spritzgiesstechnologie - Trends und aktuelle Entwicklungen. Friesenbichler, W. & Berger, G. R. (eds.). Leoben: Eigenverlag, Vol. 7. p. 263-264

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  41. Published

    Bio-basierte Verbundwerkstoffe

    Schledjewski, R., Resch-Fauster, K., Anusic, A. & Blößl, Y., Apr 2017.

    Research output: Contribution to conference › Poster › Transfer

  42. Published

    Effiziente Verarbeitung von Verbundwerkstoffen für Luftfahrtanwendungen

    Schledjewski, R., Hueber, C., Konstantopoulos, S., Lloret Pertegas, S. & Tonejc, M., Apr 2017, Tagungsband zum 26. Leobener Kunststoff-Kolloquium: Innovative Spritzgiesstechnologie - Trends und aktuelle Entwicklungen. Friesenbichler, W. & Berger, G. R. (eds.). Leoben: Eigenverlag, Vol. 07. p. 261-262 2 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  43. Published

    Effiziente Verarbeitung von Verbundwerkstoffen für Luftfahrtanwendungen

    Schledjewski, R., Hueber, C., Konstantopoulos, S., Lloret Pertegas, S. & Tonejc, M., Apr 2017.

    Research output: Contribution to conference › Poster › Transfer

  44. Published

    Verarbeitung von Verbundwerkstoffen

    Schledjewski, R. & Fauster, E., Apr 2017, Tagungsband zum 26. Leobener Kunststoff-Kolloquium: Innovative Spritzgiesstechnologie - Trends und aktuelle Entwicklungen. Friesenbichler, W. & Berger, G. R. (eds.). Leoben: Eigenverlag, Vol. 7. p. 265-266

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  45. Published

    Verarbeitung von Verbundwerkstoffen

    Schledjewski, R. & Fauster, E., Apr 2017.

    Research output: Contribution to conference › Poster › Transfer

  46. Published

    Flüssigimprägnierung von Naturfasertextilien im Vergleich mit synthetischen Faserverstärkungen

    Blößl, Y. & Schledjewski, R., 24 Mar 2017.

    Research output: Contribution to conference › Abstract › peer-review

  47. Published

    Hybride Verbundwerkstoffe: Potenziale und Herausforderungen

    Hergan, P., Fauster, E., Stelzer, S., Pinter, G. & Schledjewski, R., 24 Mar 2017.

    Research output: Contribution to conference › Abstract › peer-review

  48. Published

    Comparative study of optimization in pultrusion with pre-heating and die-cooler temperature for improved cure

    Costa Dias, R. D. C., de Sousa Santos, L. & Schledjewski, R., 1 Jan 2017, THERMEC 2016. Ionescu, M., Mishra, B., Kozeschnik, E., Sommitsch, C., Chandra, T. & Mishra, B. (eds.). Trans Tech Publications, p. 402-407 6 p. (Materials Science Forum; vol. 879).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  49. Published

    Delamination properties of hybrid steel- carbon composite materials produced via resin transfer molding

    Stelzer, S., Brandstetter, D., Hergan, P., Fauster, E. & Pinter, G. G., 2017.

    Research output: Contribution to conference › Poster › Research › peer-review

  50. Published

    Design and manufacturing of high performance green composites based on renewable materials

    Resch-Fauster, K., Klein, A., Lloret Pertegas, S. & Schledjewski, R., 2017, Handbook of Composites from Renewable Materials, Vol. 2, Design and Manufacturing. Wiley-VCH , p. 1-24

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  51. Published

    Design of Experiments Versuche an Hybridplatten – Betrachtung der Phänomene des RTM-Prozesses

    Beter, J., 2017

    Research output: Thesis › Master's Thesis

  52. Published

    In-Plane Permeability Characterization of Reinforcing Fabrics Based on Radial-Flow Experiments: Comparative Studies

    Fauster, E., 2017.

    Research output: Contribution to conference › Presentation › Research

Previous 1 2 3 4 5 6 7 8 Next
View graph of relations

Contact information

Otto Glöckel-Straße 2/III, 8700 Leoben
  • Main phone number: +43 3842 402 2701